termux-packages/packages/dropbear/default_options.h.patch

--- ./default_options.h.orig	2020-06-15 17:38:08.000000000 +0200
+++ ./default_options.h	2020-06-23 21:29:37.665940247 +0200
@@ -13,16 +13,16 @@
 
 IMPORTANT: Some options will require "make clean" after changes */
 
-#define DROPBEAR_DEFPORT "22"
+#define DROPBEAR_DEFPORT "8022"
 
 /* Listen on all interfaces */
 #define DROPBEAR_DEFADDRESS ""
 
 /* Default hostkey paths - these can be specified on the command line */
-#define DSS_PRIV_FILENAME "/etc/dropbear/dropbear_dss_host_key"
-#define RSA_PRIV_FILENAME "/etc/dropbear/dropbear_rsa_host_key"
-#define ECDSA_PRIV_FILENAME "/etc/dropbear/dropbear_ecdsa_host_key"
-#define ED25519_PRIV_FILENAME "/etc/dropbear/dropbear_ed25519_host_key"
+#define DSS_PRIV_FILENAME "@TERMUX_PREFIX@/etc/dropbear/dropbear_dss_host_key"
+#define RSA_PRIV_FILENAME "@TERMUX_PREFIX@/etc/dropbear/dropbear_rsa_host_key"
+#define ECDSA_PRIV_FILENAME "@TERMUX_PREFIX@/etc/dropbear/dropbear_ecdsa_host_key"
+#define ED25519_PRIV_FILENAME "@TERMUX_PREFIX@/etc/dropbear/dropbear_ed25519_host_key"
 
 /* Set NON_INETD_MODE if you require daemon functionality (ie Dropbear listens
  * on chosen ports and keeps accepting connections. This is the default.
@@ -45,7 +45,7 @@
  * several kB in binary size however will make the symmetrical ciphers and hashes
  * slower, perhaps by 50%. Recommended for small systems that aren't doing
  * much traffic. */
-#define DROPBEAR_SMALL_CODE 1
+#undef DROPBEAR_SMALL_CODE
 
 /* Enable X11 Forwarding - server only */
 #define DROPBEAR_X11FWD 0
@@ -189,7 +189,7 @@
 
 /* Whether to print the message of the day (MOTD). */
 #define DO_MOTD 1
-#define MOTD_FILENAME "/etc/motd"
+#define MOTD_FILENAME "@TERMUX_PREFIX@/etc/motd"
 
 /* Authentication Types - at least one required.
    RFC Draft requires pubkey auth, and recommends password */
@@ -213,7 +213,7 @@
 /* Set this to 0 if your system does not have multiple user support.
    (Linux kernel CONFIG_MULTIUSER option)
    The resulting binary will not run on a normal system. */
-#define DROPBEAR_SVR_MULTIUSER 1
+#define DROPBEAR_SVR_MULTIUSER 0
 
 /* Client authentication options */
 #define DROPBEAR_CLI_PASSWORD_AUTH 1
@@ -241,7 +241,7 @@
 
 /* Set this to use PRNGD or EGD instead of /dev/urandom */
 #define DROPBEAR_USE_PRNGD 0
-#define DROPBEAR_PRNGD_SOCKET "/var/run/dropbear-rng"
+#define DROPBEAR_PRNGD_SOCKET "@TERMUX_PREFIX@/var/run/dropbear-rng"
 
 /* Specify the number of clients we will allow to be connected but
  * not yet authenticated. After this limit, connections are rejected */
@@ -258,22 +258,22 @@
 
 /* The default file to store the daemon's process ID, for shutdown
    scripts etc. This can be overridden with the -P flag */
-#define DROPBEAR_PIDFILE "/var/run/dropbear.pid"
+#define DROPBEAR_PIDFILE "@TERMUX_PREFIX@/var/run/dropbear.pid"
 
 /* The command to invoke for xauth when using X11 forwarding.
  * "-q" for quiet */
-#define XAUTH_COMMAND "/usr/bin/xauth -q"
+#define XAUTH_COMMAND "@TERMUX_PREFIX@/bin/xauth -q"
 
 
 /* if you want to enable running an sftp server (such as the one included with
  * OpenSSH), set the path below and set DROPBEAR_SFTPSERVER. 
  * The sftp-server program is not provided by Dropbear itself */
 #define DROPBEAR_SFTPSERVER 1
-#define SFTPSERVER_PATH "/usr/libexec/sftp-server"
+#define SFTPSERVER_PATH "@TERMUX_PREFIX@/libexec/sftp-server"
 
 /* This is used by the scp binary when used as a client binary. If you're
  * not using the Dropbear client, you'll need to change it */
-#define DROPBEAR_PATH_SSH_PROGRAM "/usr/bin/dbclient"
+#define DROPBEAR_PATH_SSH_PROGRAM "@TERMUX_PREFIX@/bin/dbclient"
 
 /* Whether to log commands executed by a client. This only logs the 
  * (single) command sent to the server, not what a user did in a 
@@ -309,6 +309,6 @@
 #define DEFAULT_IDLE_TIMEOUT 0
 
 /* The default path. This will often get replaced by the shell */
-#define DEFAULT_PATH "/usr/bin:/bin"
+#define DEFAULT_PATH "@TERMUX_PREFIX@/bin"
 
 #endif /* DROPBEAR_DEFAULT_OPTIONS_H_ */