diff --git a/packages/neovim/build.sh b/packages/neovim/build.sh index 55029a7b2..a272f84f7 100644 --- a/packages/neovim/build.sh +++ b/packages/neovim/build.sh @@ -1,7 +1,7 @@ TERMUX_PKG_HOMEPAGE=http://neovim.org/ TERMUX_PKG_DESCRIPTION="Ambitious Vim-fork focused on extensibility and agility (nvim)" -_COMMIT=0d93cd6c46e0b81e981197c4446aceb325325b5a -TERMUX_PKG_VERSION=0.1.5.201608040622 +_COMMIT=884b37fd2adda17fbcc2392ae871e6999b758895 +TERMUX_PKG_VERSION=0.1.5.201608141419 TERMUX_PKG_SRCURL=https://github.com/neovim/neovim/archive/${_COMMIT}.zip TERMUX_PKG_DEPENDS="libuv, libmsgpack, libandroid-support, libvterm, libtermkey, libutil" TERMUX_PKG_FOLDERNAME="neovim-$_COMMIT" @@ -36,7 +36,7 @@ termux_step_configure () { -DCMAKE_LINKER=`which ${TERMUX_HOST_PLATFORM}-ld` \ -DCMAKE_MAKE_PROGRAM=`which make` \ -DCMAKE_RANLIB=`which ${TERMUX_HOST_PLATFORM}-ranlib` \ - -DCMAKE_SYSTEM_NAME=Linux \ + -DCMAKE_SYSTEM_NAME=Android \ -DPKG_CONFIG_EXECUTABLE=$PKG_CONFIG \ -DENABLE_JEMALLOC=OFF \ -DLUA_PRG=$TERMUX_PKG_HOSTBUILD_DIR/deps/usr/bin/luajit \ @@ -47,7 +47,4 @@ termux_step_post_make_install () { local _CONFIG_DIR=$TERMUX_PREFIX/etc/xdg/nvim mkdir -p $_CONFIG_DIR cp $TERMUX_PKG_BUILDER_DIR/init.vim $_CONFIG_DIR/ - - # neovim needs col for the man command: - $CC $CFLAGS $LDFLAGS -isystem $TERMUX_PREFIX/include/libandroid-support $TERMUX_PKG_BUILDER_DIR/col.c -o $TERMUX_PREFIX/bin/col } diff --git a/packages/neovim/col.c b/packages/neovim/col.c deleted file mode 100644 index 378dc2c74..000000000 --- a/packages/neovim/col.c +++ /dev/null @@ -1,581 +0,0 @@ -/* From https://svnweb.freebsd.org/base/head/usr.bin/col/, r282722 */ - -/*- - * Copyright (c) 1990, 1993, 1994 - * The Regents of the University of California. All rights reserved. - * - * This code is derived from software contributed to Berkeley by - * Michael Rendell of the Memorial University of Newfoundland. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 4. Neither the name of the University nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - */ - -#ifndef lint -static const char copyright[] = -"@(#) Copyright (c) 1990, 1993, 1994\n\ - The Regents of the University of California. All rights reserved.\n"; -#endif - -#if 0 -#ifndef lint -static char sccsid[] = "@(#)col.c 8.5 (Berkeley) 5/4/95"; -#endif -#endif - -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define BS '\b' /* backspace */ -#define TAB '\t' /* tab */ -#define SPACE ' ' /* space */ -#define NL '\n' /* newline */ -#define CR '\r' /* carriage return */ -#define ESC '\033' /* escape */ -#define SI '\017' /* shift in to normal character set */ -#define SO '\016' /* shift out to alternate character set */ -#define VT '\013' /* vertical tab (aka reverse line feed) */ -#define RLF '7' /* ESC-7 reverse line feed */ -#define RHLF '8' /* ESC-8 reverse half-line feed */ -#define FHLF '9' /* ESC-9 forward half-line feed */ - -/* build up at least this many lines before flushing them out */ -#define BUFFER_MARGIN 32 - -typedef char CSET; - -typedef struct char_str { -#define CS_NORMAL 1 -#define CS_ALTERNATE 2 - short c_column; /* column character is in */ - CSET c_set; /* character set (currently only 2) */ - wchar_t c_char; /* character in question */ - int c_width; /* character width */ -} CHAR; - -typedef struct line_str LINE; -struct line_str { - CHAR *l_line; /* characters on the line */ - LINE *l_prev; /* previous line */ - LINE *l_next; /* next line */ - int l_lsize; /* allocated sizeof l_line */ - int l_line_len; /* strlen(l_line) */ - int l_needs_sort; /* set if chars went in out of order */ - int l_max_col; /* max column in the line */ -}; - -static void addto_lineno(int *, int); -static LINE *alloc_line(void); -static void dowarn(int); -static void flush_line(LINE *); -static void flush_lines(int); -static void flush_blanks(void); -static void free_line(LINE *); -static void usage(void); - -static CSET last_set; /* char_set of last char printed */ -static LINE *lines; -static int compress_spaces; /* if doing space -> tab conversion */ -static int fine; /* if `fine' resolution (half lines) */ -static int max_bufd_lines; /* max # of half lines to keep in memory */ -static int nblank_lines; /* # blanks after last flushed line */ -static int no_backspaces; /* if not to output any backspaces */ -static int pass_unknown_seqs; /* pass unknown control sequences */ - -#define PUTC(ch) \ - do { \ - if (putwchar(ch) == WEOF) \ - errx(1, "write error"); \ - } while (0) - -int -main(int argc, char **argv) -{ - wint_t ch; - CHAR *c; - CSET cur_set; /* current character set */ - LINE *l; /* current line */ - int extra_lines; /* # of lines above first line */ - int cur_col; /* current column */ - int cur_line; /* line number of current position */ - int max_line; /* max value of cur_line */ - int this_line; /* line l points to */ - int nflushd_lines; /* number of lines that were flushed */ - int adjust, opt, warned, width; - const char *errstr; - unsigned long cmd; - - (void)setlocale(LC_CTYPE, ""); - - max_bufd_lines = 256; - compress_spaces = 1; /* compress spaces into tabs */ - while ((opt = getopt(argc, argv, "bfhl:px")) != -1) - switch (opt) { - case 'b': /* do not output backspaces */ - no_backspaces = 1; - break; - case 'f': /* allow half forward line feeds */ - fine = 1; - break; - case 'h': /* compress spaces into tabs */ - compress_spaces = 1; - break; - case 'l': /* buffered line count */ - max_bufd_lines = atoi(optarg); - break; - case 'p': /* pass unknown control sequences */ - pass_unknown_seqs = 1; - break; - case 'x': /* do not compress spaces into tabs */ - compress_spaces = 0; - break; - case '?': - default: - usage(); - } - - if (optind != argc) - usage(); - - adjust = cur_col = extra_lines = warned = 0; - cur_line = max_line = nflushd_lines = this_line = 0; - cur_set = last_set = CS_NORMAL; - lines = l = alloc_line(); - - while ((ch = getwchar()) != WEOF) { - if (!iswgraph(ch)) { - switch (ch) { - case BS: /* can't go back further */ - if (cur_col == 0) - continue; - --cur_col; - continue; - case CR: - cur_col = 0; - continue; - case ESC: /* just ignore EOF */ - switch(getwchar()) { - /* - * In the input stream, accept both the - * XPG5 sequences ESC-digit and the - * traditional BSD sequences ESC-ctrl. - */ - case '\007': - /* FALLTHROUGH */ - case RLF: - addto_lineno(&cur_line, -2); - break; - case '\010': - /* FALLTHROUGH */ - case RHLF: - addto_lineno(&cur_line, -1); - break; - case '\011': - /* FALLTHROUGH */ - case FHLF: - addto_lineno(&cur_line, 1); - if (cur_line > max_line) - max_line = cur_line; - } - continue; - case NL: - addto_lineno(&cur_line, 2); - if (cur_line > max_line) - max_line = cur_line; - cur_col = 0; - continue; - case SPACE: - ++cur_col; - continue; - case SI: - cur_set = CS_NORMAL; - continue; - case SO: - cur_set = CS_ALTERNATE; - continue; - case TAB: /* adjust column */ - cur_col |= 7; - ++cur_col; - continue; - case VT: - addto_lineno(&cur_line, -2); - continue; - } - if (iswspace(ch)) { - if ((width = wcwidth(ch)) > 0) - cur_col += width; - continue; - } - if (!pass_unknown_seqs) - continue; - } - - /* Must stuff ch in a line - are we at the right one? */ - if (cur_line + adjust != this_line) { - LINE *lnew; - - /* round up to next line */ - adjust = !fine && (cur_line & 1); - - if (cur_line + adjust < this_line) { - while (cur_line + adjust < this_line && - l->l_prev != NULL) { - l = l->l_prev; - this_line--; - } - if (cur_line + adjust < this_line) { - if (nflushd_lines == 0) { - /* - * Allow backup past first - * line if nothing has been - * flushed yet. - */ - while (cur_line + adjust - < this_line) { - lnew = alloc_line(); - l->l_prev = lnew; - lnew->l_next = l; - l = lines = lnew; - extra_lines++; - this_line--; - } - } else { - if (!warned++) - dowarn(cur_line); - cur_line = this_line - adjust; - } - } - } else { - /* may need to allocate here */ - while (cur_line + adjust > this_line) { - if (l->l_next == NULL) { - l->l_next = alloc_line(); - l->l_next->l_prev = l; - } - l = l->l_next; - this_line++; - } - } - if (this_line > nflushd_lines && - this_line - nflushd_lines >= - max_bufd_lines + BUFFER_MARGIN) { - if (extra_lines) { - flush_lines(extra_lines); - extra_lines = 0; - } - flush_lines(this_line - nflushd_lines - - max_bufd_lines); - nflushd_lines = this_line - max_bufd_lines; - } - } - /* grow line's buffer? */ - if (l->l_line_len + 1 >= l->l_lsize) { - int need; - - need = l->l_lsize ? l->l_lsize * 2 : 90; - if ((l->l_line = realloc(l->l_line, - (unsigned)need * sizeof(CHAR))) == NULL) - err(1, NULL); - l->l_lsize = need; - } - c = &l->l_line[l->l_line_len++]; - c->c_char = ch; - c->c_set = cur_set; - c->c_column = cur_col; - c->c_width = wcwidth(ch); - /* - * If things are put in out of order, they will need sorting - * when it is flushed. - */ - if (cur_col < l->l_max_col) - l->l_needs_sort = 1; - else - l->l_max_col = cur_col; - if (c->c_width > 0) - cur_col += c->c_width; - } - if (ferror(stdin)) - err(1, NULL); - if (extra_lines) - flush_lines(extra_lines); - - /* goto the last line that had a character on it */ - for (; l->l_next; l = l->l_next) - this_line++; - flush_lines(this_line - nflushd_lines + 1); - - /* make sure we leave things in a sane state */ - if (last_set != CS_NORMAL) - PUTC(SI); - - /* flush out the last few blank lines */ - if (max_line > this_line) - nblank_lines = max_line - this_line; - if (max_line & 1) - nblank_lines++; - flush_blanks(); - exit(0); -} - -static void -flush_lines(int nflush) -{ - LINE *l; - - while (--nflush >= 0) { - l = lines; - lines = l->l_next; - if (l->l_line) { - flush_blanks(); - flush_line(l); - } - if (l->l_line || l->l_next) - nblank_lines++; - if (l->l_line) - (void)free(l->l_line); - free_line(l); - } - if (lines) - lines->l_prev = NULL; -} - -/* - * Print a number of newline/half newlines. If fine flag is set, nblank_lines - * is the number of half line feeds, otherwise it is the number of whole line - * feeds. - */ -static void -flush_blanks(void) -{ - int half, i, nb; - - half = 0; - nb = nblank_lines; - if (nb & 1) { - if (fine) - half = 1; - else - nb++; - } - nb /= 2; - for (i = nb; --i >= 0;) - PUTC('\n'); - if (half) { - PUTC(ESC); - PUTC(FHLF); - if (!nb) - PUTC('\r'); - } - nblank_lines = 0; -} - -/* - * Write a line to stdout taking care of space to tab conversion (-h flag) - * and character set shifts. - */ -static void -flush_line(LINE *l) -{ - CHAR *c, *endc; - int i, j, nchars, last_col, save, this_col, tot; - - last_col = 0; - nchars = l->l_line_len; - - if (l->l_needs_sort) { - static CHAR *sorted; - static int count_size, *count, sorted_size; - - /* - * Do an O(n) sort on l->l_line by column being careful to - * preserve the order of characters in the same column. - */ - if (l->l_lsize > sorted_size) { - sorted_size = l->l_lsize; - if ((sorted = realloc(sorted, - (unsigned)sizeof(CHAR) * sorted_size)) == NULL) - err(1, NULL); - } - if (l->l_max_col >= count_size) { - count_size = l->l_max_col + 1; - if ((count = realloc(count, - (unsigned)sizeof(int) * count_size)) == NULL) - err(1, NULL); - } - memset(count, 0, sizeof(int) * l->l_max_col + 1); - for (i = nchars, c = l->l_line; --i >= 0; c++) - count[c->c_column]++; - - /* - * calculate running total (shifted down by 1) to use as - * indices into new line. - */ - for (tot = 0, i = 0; i <= l->l_max_col; i++) { - save = count[i]; - count[i] = tot; - tot += save; - } - - for (i = nchars, c = l->l_line; --i >= 0; c++) - sorted[count[c->c_column]++] = *c; - c = sorted; - } else - c = l->l_line; - while (nchars > 0) { - this_col = c->c_column; - endc = c; - do { - ++endc; - } while (--nchars > 0 && this_col == endc->c_column); - - /* if -b only print last character */ - if (no_backspaces) { - c = endc - 1; - if (nchars > 0 && - this_col + c->c_width > endc->c_column) - continue; - } - - if (this_col > last_col) { - int nspace = this_col - last_col; - - if (compress_spaces && nspace > 1) { - while (1) { - int tab_col, tab_size; - - tab_col = (last_col + 8) & ~7; - if (tab_col > this_col) - break; - tab_size = tab_col - last_col; - if (tab_size == 1) - PUTC(' '); - else - PUTC('\t'); - nspace -= tab_size; - last_col = tab_col; - } - } - while (--nspace >= 0) - PUTC(' '); - last_col = this_col; - } - - for (;;) { - if (c->c_set != last_set) { - switch (c->c_set) { - case CS_NORMAL: - PUTC(SI); - break; - case CS_ALTERNATE: - PUTC(SO); - } - last_set = c->c_set; - } - PUTC(c->c_char); - if ((c + 1) < endc) - for (j = 0; j < c->c_width; j++) - PUTC('\b'); - if (++c >= endc) - break; - } - last_col += (c - 1)->c_width; - } -} - -/* - * Increment or decrement a line number, checking for overflow. - * Stop one below INT_MAX such that the adjust variable is safe. - */ -void -addto_lineno(int *lno, int offset) -{ - if (offset > 0) { - if (*lno >= INT_MAX - offset) - errx(1, "too many lines"); - } else { - if (*lno < INT_MIN - offset) - errx(1, "too many reverse line feeds"); - } - *lno += offset; -} - -#define NALLOC 64 - -static LINE *line_freelist; - -static LINE * -alloc_line(void) -{ - LINE *l; - int i; - - if (!line_freelist) { - if ((l = realloc(NULL, sizeof(LINE) * NALLOC)) == NULL) - err(1, NULL); - line_freelist = l; - for (i = 1; i < NALLOC; i++, l++) - l->l_next = l + 1; - l->l_next = NULL; - } - l = line_freelist; - line_freelist = l->l_next; - - memset(l, 0, sizeof(LINE)); - return (l); -} - -static void -free_line(LINE *l) -{ - - l->l_next = line_freelist; - line_freelist = l; -} - -static void -usage(void) -{ - - (void)fprintf(stderr, "usage: col [-bfhpx] [-l nline]\n"); - exit(1); -} - -static void -dowarn(int line) -{ - - warnx("warning: can't back up %s", - line < 0 ? "past first line" : "-- line already flushed"); -} diff --git a/packages/neovim/runtime-autoload-man.vim.patch b/packages/neovim/runtime-autoload-man.vim.patch deleted file mode 100644 index eccef6163..000000000 --- a/packages/neovim/runtime-autoload-man.vim.patch +++ /dev/null @@ -1,20 +0,0 @@ -diff -u -r ../neovim-09c58f721ba64ce0e6e1b5d0f2b6291ec9a6555f/runtime/autoload/man.vim ./runtime/autoload/man.vim ---- ../neovim-09c58f721ba64ce0e6e1b5d0f2b6291ec9a6555f/runtime/autoload/man.vim 2016-07-13 12:09:26.000000000 -0400 -+++ ./runtime/autoload/man.vim 2016-08-04 11:23:49.834834852 -0400 -@@ -73,7 +73,7 @@ - if empty($MANWIDTH) - let $MANWIDTH = winwidth(0) - endif -- silent exec 'r!/usr/bin/man '.s:cmd(sect, page).' | col -b' -+ silent exec 'r!man '.s:cmd(sect, page).' | col -b | uniq' - " Remove blank lines from top and bottom. - while getline(1) =~# '^\s*$' - silent keepjumps 1delete _ -@@ -132,6 +132,6 @@ - endfunction - - function s:find_page(sect, page) abort -- let where = system('/usr/bin/man '.s:man_find_arg.' '.s:cmd(a:sect, a:page)) -+ let where = system('man '.s:man_find_arg.' '.s:cmd(a:sect, a:page)) - return (where =~# '^ */') - endfunction