termux-packages/packages/libhdf5/arm/TryRunResults_out.cmake

223 lines
12 KiB
CMake

# This file was generated by CMake because it detected TRY_RUN() commands
# in crosscompiling mode. It will be overwritten by the next CMake run.
# Copy it to a safe location, set the variables to appropriate values
# and use it then to preset the CMake cache (using -C).
# TEST_LFS_WORKS_RUN
# indicates whether the executable would have been able to run on its
# target platform. If so, set TEST_LFS_WORKS_RUN to
# the exit code (in many cases 0 for success), otherwise enter "FAILED_TO_RUN".
# TEST_LFS_WORKS_RUN__TRYRUN_OUTPUT
# contains the text the executable would have printed on stdout and stderr.
# If the executable would not have been able to run, set TEST_LFS_WORKS_RUN__TRYRUN_OUTPUT empty.
# Otherwise check if the output is evaluated by the calling CMake code. If so,
# check what the source file would have printed when called with the given arguments.
# The TEST_LFS_WORKS_COMPILE variable holds the build result for this TRY_RUN().
#
# Source file : /home/builder/.termux-build/libhdf5/src/config/cmake_ext_mod/HDFTests.c
# Executable : /home/builder/.termux-build/libhdf5/build/CMakeFiles/cmTC_0c83a-TEST_LFS_WORKS_RUN
# Run arguments :
# Called from: [3] /home/builder/.termux-build/libhdf5/src/config/cmake_ext_mod/ConfigureChecks.cmake
# [2] /home/builder/.termux-build/libhdf5/src/config/cmake/ConfigureChecks.cmake
# [1] /home/builder/.termux-build/libhdf5/src/CMakeLists.txt
set( TEST_LFS_WORKS_RUN
"1"
CACHE STRING "Result from TRY_RUN" FORCE)
set( TEST_LFS_WORKS_RUN__TRYRUN_OUTPUT
""
CACHE STRING "Output from TRY_RUN" FORCE)
# H5_PRINTF_LL_TEST_RUN
# indicates whether the executable would have been able to run on its
# target platform. If so, set H5_PRINTF_LL_TEST_RUN to
# the exit code (in many cases 0 for success), otherwise enter "FAILED_TO_RUN".
# H5_PRINTF_LL_TEST_RUN__TRYRUN_OUTPUT
# contains the text the executable would have printed on stdout and stderr.
# If the executable would not have been able to run, set H5_PRINTF_LL_TEST_RUN__TRYRUN_OUTPUT empty.
# Otherwise check if the output is evaluated by the calling CMake code. If so,
# check what the source file would have printed when called with the given arguments.
# The H5_PRINTF_LL_TEST_COMPILE variable holds the build result for this TRY_RUN().
#
# Source file : /home/builder/.termux-build/libhdf5/src/config/cmake_ext_mod/HDFTests.c
# Executable : /home/builder/.termux-build/libhdf5/build/CMakeFiles/cmTC_0923e-H5_PRINTF_LL_TEST_RUN
# Run arguments :
# Called from: [3] /home/builder/.termux-build/libhdf5/src/config/cmake_ext_mod/ConfigureChecks.cmake
# [2] /home/builder/.termux-build/libhdf5/src/config/cmake/ConfigureChecks.cmake
# [1] /home/builder/.termux-build/libhdf5/src/CMakeLists.txt
set( H5_PRINTF_LL_TEST_RUN
"0"
CACHE STRING "Result from TRY_RUN" FORCE)
set( H5_PRINTF_LL_TEST_RUN__TRYRUN_OUTPUT
"H5_PRINTF_LL_WIDTH=[l]"
CACHE STRING "Output from TRY_RUN" FORCE)
# H5_LDOUBLE_TO_LONG_SPECIAL_RUN
# indicates whether the executable would have been able to run on its
# target platform. If so, set H5_LDOUBLE_TO_LONG_SPECIAL_RUN to
# the exit code (in many cases 0 for success), otherwise enter "FAILED_TO_RUN".
# H5_LDOUBLE_TO_LONG_SPECIAL_RUN__TRYRUN_OUTPUT
# contains the text the executable would have printed on stdout and stderr.
# If the executable would not have been able to run, set H5_LDOUBLE_TO_LONG_SPECIAL_RUN__TRYRUN_OUTPUT empty.
# Otherwise check if the output is evaluated by the calling CMake code. If so,
# check what the source file would have printed when called with the given arguments.
# The H5_LDOUBLE_TO_LONG_SPECIAL_COMPILE variable holds the build result for this TRY_RUN().
#
# Source file : /home/builder/.termux-build/libhdf5/src/config/cmake/ConversionTests.c
# Executable : /home/builder/.termux-build/libhdf5/build/CMakeFiles/cmTC_b96b8-H5_LDOUBLE_TO_LONG_SPECIAL_RUN
# Run arguments :
# Called from: [3] /home/builder/.termux-build/libhdf5/src/config/cmake/ConfigureChecks.cmake
# [2] /home/builder/.termux-build/libhdf5/src/config/cmake/ConfigureChecks.cmake
# [1] /home/builder/.termux-build/libhdf5/src/CMakeLists.txt
set( H5_LDOUBLE_TO_LONG_SPECIAL_RUN
"1"
CACHE STRING "Result from TRY_RUN" FORCE)
set( H5_LDOUBLE_TO_LONG_SPECIAL_RUN__TRYRUN_OUTPUT
""
CACHE STRING "Output from TRY_RUN" FORCE)
# H5_LONG_TO_LDOUBLE_SPECIAL_RUN
# indicates whether the executable would have been able to run on its
# target platform. If so, set H5_LONG_TO_LDOUBLE_SPECIAL_RUN to
# the exit code (in many cases 0 for success), otherwise enter "FAILED_TO_RUN".
# H5_LONG_TO_LDOUBLE_SPECIAL_RUN__TRYRUN_OUTPUT
# contains the text the executable would have printed on stdout and stderr.
# If the executable would not have been able to run, set H5_LONG_TO_LDOUBLE_SPECIAL_RUN__TRYRUN_OUTPUT empty.
# Otherwise check if the output is evaluated by the calling CMake code. If so,
# check what the source file would have printed when called with the given arguments.
# The H5_LONG_TO_LDOUBLE_SPECIAL_COMPILE variable holds the build result for this TRY_RUN().
#
# Source file : /home/builder/.termux-build/libhdf5/src/config/cmake/ConversionTests.c
# Executable : /home/builder/.termux-build/libhdf5/build/CMakeFiles/cmTC_f960d-H5_LONG_TO_LDOUBLE_SPECIAL_RUN
# Run arguments :
# Called from: [3] /home/builder/.termux-build/libhdf5/src/config/cmake/ConfigureChecks.cmake
# [2] /home/builder/.termux-build/libhdf5/src/config/cmake/ConfigureChecks.cmake
# [1] /home/builder/.termux-build/libhdf5/src/CMakeLists.txt
set( H5_LONG_TO_LDOUBLE_SPECIAL_RUN
"1"
CACHE STRING "Result from TRY_RUN" FORCE)
set( H5_LONG_TO_LDOUBLE_SPECIAL_RUN__TRYRUN_OUTPUT
""
CACHE STRING "Output from TRY_RUN" FORCE)
# H5_LDOUBLE_TO_LLONG_ACCURATE_RUN
# indicates whether the executable would have been able to run on its
# target platform. If so, set H5_LDOUBLE_TO_LLONG_ACCURATE_RUN to
# the exit code (in many cases 0 for success), otherwise enter "FAILED_TO_RUN".
# H5_LDOUBLE_TO_LLONG_ACCURATE_RUN__TRYRUN_OUTPUT
# contains the text the executable would have printed on stdout and stderr.
# If the executable would not have been able to run, set H5_LDOUBLE_TO_LLONG_ACCURATE_RUN__TRYRUN_OUTPUT empty.
# Otherwise check if the output is evaluated by the calling CMake code. If so,
# check what the source file would have printed when called with the given arguments.
# The H5_LDOUBLE_TO_LLONG_ACCURATE_COMPILE variable holds the build result for this TRY_RUN().
#
# Source file : /home/builder/.termux-build/libhdf5/src/config/cmake/ConversionTests.c
# Executable : /home/builder/.termux-build/libhdf5/build/CMakeFiles/cmTC_39750-H5_LDOUBLE_TO_LLONG_ACCURATE_RUN
# Run arguments :
# Called from: [3] /home/builder/.termux-build/libhdf5/src/config/cmake/ConfigureChecks.cmake
# [2] /home/builder/.termux-build/libhdf5/src/config/cmake/ConfigureChecks.cmake
# [1] /home/builder/.termux-build/libhdf5/src/CMakeLists.txt
set( H5_LDOUBLE_TO_LLONG_ACCURATE_RUN
"0"
CACHE STRING "Result from TRY_RUN" FORCE)
set( H5_LDOUBLE_TO_LLONG_ACCURATE_RUN__TRYRUN_OUTPUT
""
CACHE STRING "Output from TRY_RUN" FORCE)
# H5_LLONG_TO_LDOUBLE_CORRECT_RUN
# indicates whether the executable would have been able to run on its
# target platform. If so, set H5_LLONG_TO_LDOUBLE_CORRECT_RUN to
# the exit code (in many cases 0 for success), otherwise enter "FAILED_TO_RUN".
# H5_LLONG_TO_LDOUBLE_CORRECT_RUN__TRYRUN_OUTPUT
# contains the text the executable would have printed on stdout and stderr.
# If the executable would not have been able to run, set H5_LLONG_TO_LDOUBLE_CORRECT_RUN__TRYRUN_OUTPUT empty.
# Otherwise check if the output is evaluated by the calling CMake code. If so,
# check what the source file would have printed when called with the given arguments.
# The H5_LLONG_TO_LDOUBLE_CORRECT_COMPILE variable holds the build result for this TRY_RUN().
#
# Source file : /home/builder/.termux-build/libhdf5/src/config/cmake/ConversionTests.c
# Executable : /home/builder/.termux-build/libhdf5/build/CMakeFiles/cmTC_e6f7f-H5_LLONG_TO_LDOUBLE_CORRECT_RUN
# Run arguments :
# Called from: [3] /home/builder/.termux-build/libhdf5/src/config/cmake/ConfigureChecks.cmake
# [2] /home/builder/.termux-build/libhdf5/src/config/cmake/ConfigureChecks.cmake
# [1] /home/builder/.termux-build/libhdf5/src/CMakeLists.txt
set( H5_LLONG_TO_LDOUBLE_CORRECT_RUN
"0"
CACHE STRING "Result from TRY_RUN" FORCE)
set( H5_LLONG_TO_LDOUBLE_CORRECT_RUN__TRYRUN_OUTPUT
""
CACHE STRING "Output from TRY_RUN" FORCE)
# H5_NO_ALIGNMENT_RESTRICTIONS_RUN
# indicates whether the executable would have been able to run on its
# target platform. If so, set H5_NO_ALIGNMENT_RESTRICTIONS_RUN to
# the exit code (in many cases 0 for success), otherwise enter "FAILED_TO_RUN".
# H5_NO_ALIGNMENT_RESTRICTIONS_RUN__TRYRUN_OUTPUT
# contains the text the executable would have printed on stdout and stderr.
# If the executable would not have been able to run, set H5_NO_ALIGNMENT_RESTRICTIONS_RUN__TRYRUN_OUTPUT empty.
# Otherwise check if the output is evaluated by the calling CMake code. If so,
# check what the source file would have printed when called with the given arguments.
# The H5_NO_ALIGNMENT_RESTRICTIONS_COMPILE variable holds the build result for this TRY_RUN().
#
# Source file : /home/builder/.termux-build/libhdf5/src/config/cmake/ConversionTests.c
# Executable : /home/builder/.termux-build/libhdf5/build/CMakeFiles/cmTC_178af-H5_NO_ALIGNMENT_RESTRICTIONS_RUN
# Run arguments :
# Called from: [3] /home/builder/.termux-build/libhdf5/src/config/cmake/ConfigureChecks.cmake
# [2] /home/builder/.termux-build/libhdf5/src/config/cmake/ConfigureChecks.cmake
# [1] /home/builder/.termux-build/libhdf5/src/CMakeLists.txt
set( H5_NO_ALIGNMENT_RESTRICTIONS_RUN
"0"
CACHE STRING "Result from TRY_RUN" FORCE)
set( H5_NO_ALIGNMENT_RESTRICTIONS_RUN__TRYRUN_OUTPUT
""
CACHE STRING "Output from TRY_RUN" FORCE)
# H5_DISABLE_SOME_LDOUBLE_CONV_RUN
# indicates whether the executable would have been able to run on its
# target platform. If so, set H5_DISABLE_SOME_LDOUBLE_CONV_RUN to
# the exit code (in many cases 0 for success), otherwise enter "FAILED_TO_RUN".
# H5_DISABLE_SOME_LDOUBLE_CONV_RUN__TRYRUN_OUTPUT
# contains the text the executable would have printed on stdout and stderr.
# If the executable would not have been able to run, set H5_DISABLE_SOME_LDOUBLE_CONV_RUN__TRYRUN_OUTPUT empty.
# Otherwise check if the output is evaluated by the calling CMake code. If so,
# check what the source file would have printed when called with the given arguments.
# The H5_DISABLE_SOME_LDOUBLE_CONV_COMPILE variable holds the build result for this TRY_RUN().
#
# Source file : /home/builder/.termux-build/libhdf5/src/config/cmake/ConversionTests.c
# Executable : /home/builder/.termux-build/libhdf5/build/CMakeFiles/cmTC_3ff45-H5_DISABLE_SOME_LDOUBLE_CONV_RUN
# Run arguments :
# Called from: [3] /home/builder/.termux-build/libhdf5/src/config/cmake/ConfigureChecks.cmake
# [2] /home/builder/.termux-build/libhdf5/src/config/cmake/ConfigureChecks.cmake
# [1] /home/builder/.termux-build/libhdf5/src/CMakeLists.txt
set( H5_DISABLE_SOME_LDOUBLE_CONV_RUN
"1"
CACHE STRING "Result from TRY_RUN" FORCE)
set( H5_DISABLE_SOME_LDOUBLE_CONV_RUN__TRYRUN_OUTPUT
""
CACHE STRING "Output from TRY_RUN" FORCE)