termux-packages/build-package.sh

671 lines
28 KiB
Bash
Executable File
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

#!/bin/bash
# Required setup for ubuntu (only tested on 15.04):
# $ apt install asciidoc automake bison cmake flex gettext libglib2.0-dev help2man libc6-dev-i386 libcurl4-openssl-dev libgdk-pixbuf2.0-dev libncurses5-dev libtool lzip m4 mercurial pkg-config scons texinfo xmlto xutils-dev
# where libc6-dev-i386 is needed by luajit host part of the build for <sys/cdefs.h>
# xutils-dev provides 'makedepend' which openssl build uses
# gettext provides 'msgfmt' which apt build uses
# libcurl4-openssl-dev is needed by apt build
# libglib2.0-dev provides 'glib-genmarshal' which glib build uses
# libgdk-pixbuf2.0-dev provides 'gdk-pixbuf-query-loaders' which librsvg build uses
# Required setup for mac (not regularly used, and may not build all packages):
# $ port install asciidoc bison cmake flex gnutar help2man lzip mercurial p5-libwww-perl pkgconfig scons xmlto
# where Busybox requires that sed is gsed: ln -s /opt/local/bin/gsed /opt/local/bin/sed
set -e -o pipefail -u
if [ "$#" -ne 1 ]; then echo "ERROR: Specify one argument!"; exit 1; fi
export TERMUX_PKG_NAME=$1
export TERMUX_SCRIPTDIR=`cd $(dirname $0); pwd`
export TERMUX_PKG_BUILDER_DIR=$TERMUX_SCRIPTDIR/packages/$TERMUX_PKG_NAME
export TERMUX_PKG_BUILDER_SCRIPT=$TERMUX_PKG_BUILDER_DIR/build.sh
if test ! -f $TERMUX_PKG_BUILDER_SCRIPT; then echo "ERROR: No such package builder: ${TERMUX_PKG_BUILDER_SCRIPT}!"; exit 1; fi
echo "termux - building $1..."
test -t 1 && printf "\033]0;$1...\007"
# Read settings from .termuxrc if existing
test -f $HOME/.termuxrc && . $HOME/.termuxrc
# Configurable settings
: ${NDK:="${HOME}/lib/android-ndk"}
: ${ANDROID_HOME:="${HOME}/lib/android-sdk"}
if [ ! -d "$NDK" ]; then echo 'ERROR: $NDK not defined as pointing at a directory - define it pointing at a android NDK installation!'; exit 1; fi
: ${TERMUX_MAKE_PROCESSES:='4'}
: ${TERMUX_TOPDIR:="$HOME/termux"}
: ${TERMUX_ARCH:="arm"} # (arm|aarch64|i686|x86_64) - the 64 bit variants do not work yet
TERMUX_ARCH_BITS="32"
if [ "x86_64" = $TERMUX_ARCH -o "aarch64" = $TERMUX_ARCH ]; then
TERMUX_ARCH_BITS="64"
fi
: ${TERMUX_HOST_PLATFORM:="${TERMUX_ARCH}-linux-android"}
if [ $TERMUX_ARCH = "arm" ]; then TERMUX_HOST_PLATFORM="${TERMUX_HOST_PLATFORM}eabi"; fi
: ${TERMUX_PREFIX:='/data/data/com.termux/files/usr'}
: ${TERMUX_ANDROID_HOME:='/data/data/com.termux/files/home'}
: ${TERMUX_DEBUG:=""}
: ${TERMUX_PROCESS_DEB:=""}
: ${TERMUX_GCC_VERSION:="4.9"}
: ${TERMUX_API_LEVEL:="21"}
: ${TERMUX_STANDALONE_TOOLCHAIN:="$HOME/lib/android-standalone-toolchain-${TERMUX_ARCH}-api${TERMUX_API_LEVEL}-gcc${TERMUX_GCC_VERSION}"}
: ${TERMUX_ANDROID_BUILD_TOOLS_VERSION:="22.0.1"}
# We do not put all of build-tools/$TERMUX_ANDROID_BUILD_TOOLS_VERSION/ into PATH
# to avoid stuff like arm-linux-androideabi-ld there to conflict with ones from
# the standalone toolchain.
TERMUX_DX=$ANDROID_HOME/build-tools/$TERMUX_ANDROID_BUILD_TOOLS_VERSION/dx
# We put this after system PATH to avoid picking up toolchain stripped python
export PATH=$PATH:$TERMUX_STANDALONE_TOOLCHAIN/bin
# Make $TERMUX_TAR and $TERMUX_TOUCH point at gnu versions:
export TERMUX_TAR="tar"
test `uname` = "Darwin" && TERMUX_TAR=gnutar
export TERMUX_TOUCH="touch"
test `uname` = "Darwin" && TERMUX_TOUCH=gtouch
# Compute NDK version. We remove the first character (the r in e.g. r9d) to get a version number which can be used in packages):
export TERMUX_NDK_VERSION=`cut -d ' ' -f 1 $NDK/RELEASE.TXT | cut -c 2-`
export prefix=${TERMUX_PREFIX} # prefix is used by some makefiles
#export ACLOCAL="aclocal -I $TERMUX_PREFIX/share/aclocal"
export AR=$TERMUX_HOST_PLATFORM-ar
export AS=${TERMUX_HOST_PLATFORM}-gcc
export CC=$TERMUX_HOST_PLATFORM-gcc
export CPP=${TERMUX_HOST_PLATFORM}-cpp
export CXX=$TERMUX_HOST_PLATFORM-g++
export CC_FOR_BUILD=gcc
export LD=$TERMUX_HOST_PLATFORM-ld
export OBJDUMP=$TERMUX_HOST_PLATFORM-objdump
# Setup pkg-config for cross-compiling:
export PKG_CONFIG=$TERMUX_STANDALONE_TOOLCHAIN/bin/${TERMUX_HOST_PLATFORM}-pkg-config
export PKG_CONFIG_LIBDIR=$TERMUX_PREFIX/lib/pkgconfig
export RANLIB=$TERMUX_HOST_PLATFORM-ranlib
export READELF=$TERMUX_HOST_PLATFORM-readelf
export STRIP=$TERMUX_HOST_PLATFORM-strip
_SPECSFLAG="-specs=$TERMUX_SCRIPTDIR/termux.spec"
export CFLAGS="$_SPECSFLAG"
export LDFLAGS="$_SPECSFLAG -L${TERMUX_PREFIX}/lib"
if [ "$TERMUX_ARCH" = "arm" ]; then
# For hard support: http://blog.alexrp.com/2014/02/18/android-hard-float-support/
# "First, to utilize the hard float ABI, you must either compile every last component of your application
# as hard float (the -mhard-float GCC/Clang switch), or mark individual functions with the appropriate
# __attribute__ to indicate the desired ABI. For example, to mark a function so that its called with the
# soft float ABI, stick __attribute__((pcs("aapcs"))) on it.
# Note that the NDK will link to a libm which uses the aforementioned attribute on all of its functions.
# This means that if you use libm functions a lot, youre not likely to get much of a boost in those places.
# The way to fix this is to add -mhard-float -D_NDK_MATH_NO_SOFTFP=1 to your GCC/Clang command line. Then
# add -lm_hard to your linker command line (or -Wl,-lm_hard if you just invoke GCC/Clang to link). This will
# make your application link statically to a libm compiled for the hard float ABI. The only downside of this
# is that your application will increase somewhat in size."
CFLAGS+=" -march=armv7-a -mfpu=neon -mhard-float -Wl,--no-warn-mismatch"
LDFLAGS+=" -march=armv7-a -Wl,--no-warn-mismatch"
elif [ $TERMUX_ARCH = "i686" ]; then
# From $NDK/docs/CPU-ARCH-ABIS.html:
CFLAGS+=" -march=i686 -msse3 -mstackrealign -mfpmath=sse"
fi
if [ -n "$TERMUX_DEBUG" ]; then
CFLAGS+=" -g3 -Og -fstack-protector --param ssp-buffer-size=4 -D_FORTIFY_SOURCE=2"
else
CFLAGS+=" -Os"
fi
export CXXFLAGS="$CFLAGS"
export CPPFLAGS="-I${TERMUX_PREFIX}/include"
export ac_cv_func_getpwent=no
export ac_cv_func_getpwnam=no
export ac_cv_func_getpwuid=no
if [ ! -d $TERMUX_STANDALONE_TOOLCHAIN ]; then
# See https://developer.android.com/ndk/guides/standalone_toolchain.html about toolchain naming.
if [ "i686" = $TERMUX_ARCH ]; then
_TERMUX_NDK_TOOLCHAIN_NAME="x86"
elif [ "x86_64" = $TERMUX_ARCH ]; then
_TERMUX_NDK_TOOLCHAIN_NAME="x86_64"
else
_TERMUX_NDK_TOOLCHAIN_NAME="$TERMUX_HOST_PLATFORM"
fi
bash $NDK/build/tools/make-standalone-toolchain.sh --platform=android-$TERMUX_API_LEVEL --toolchain=${_TERMUX_NDK_TOOLCHAIN_NAME}-${TERMUX_GCC_VERSION} \
--install-dir=$TERMUX_STANDALONE_TOOLCHAIN --system=`uname | tr '[:upper:]' '[:lower:]'`-x86_64
if [ "arm" = $TERMUX_ARCH ]; then
# Fix to allow e.g. <bits/c++config.h> to be included:
cp $TERMUX_STANDALONE_TOOLCHAIN/include/c++/$TERMUX_GCC_VERSION/arm-linux-androideabi/armv7-a/bits/* $TERMUX_STANDALONE_TOOLCHAIN/include/c++/$TERMUX_GCC_VERSION/bits
fi
cd $TERMUX_STANDALONE_TOOLCHAIN/sysroot
for f in $TERMUX_SCRIPTDIR/ndk_patches/*.patch; do
sed "s%\@TERMUX_PREFIX\@%${TERMUX_PREFIX}%g" $f | \
sed "s%\@TERMUX_HOME\@%${TERMUX_ANDROID_HOME}%g" | \
patch -p1;
echo "PATCHING FILE $f done!"
done
# sha1.h was removed from android ndk for platforms above 19, but needed by the aapt package
# JNIHelp.h is also used by aapt
# sysexits.h is header-only and used by some unix code
cp $TERMUX_SCRIPTDIR/ndk_patches/{sha1.h,sysexits.h,JNIHelp.h} $TERMUX_STANDALONE_TOOLCHAIN/sysroot/usr/include
fi
export TERMUX_COMMON_CACHEDIR="$TERMUX_TOPDIR/_cache"
export TERMUX_COMMON_DEBDIR="$TERMUX_TOPDIR/_deb"
mkdir -p $TERMUX_COMMON_CACHEDIR $TERMUX_COMMON_DEBDIR
# Get fresh versions of config.sub and config.guess
for f in config.sub config.guess; do test ! -f $TERMUX_COMMON_CACHEDIR/$f && curl "http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=${f};hb=HEAD" > $TERMUX_COMMON_CACHEDIR/$f; done
# Have a debian-binary file ready for deb packaging:
test ! -f $TERMUX_COMMON_CACHEDIR/debian-binary && echo "2.0" > $TERMUX_COMMON_CACHEDIR/debian-binary
# The host tuple that may be given to --host configure flag, but normally autodetected so not needed explicitly
TERMUX_HOST_TUPLE=`sh $TERMUX_COMMON_CACHEDIR/config.guess`
TERMUX_PKG_BUILDDIR=$TERMUX_TOPDIR/$TERMUX_PKG_NAME/build
TERMUX_PKG_CACHEDIR=$TERMUX_TOPDIR/$TERMUX_PKG_NAME/cache
TERMUX_PKG_MASSAGEDIR=$TERMUX_TOPDIR/$TERMUX_PKG_NAME/massage
TERMUX_PKG_PACKAGEDIR=$TERMUX_TOPDIR/$TERMUX_PKG_NAME/package
TERMUX_PKG_SRCDIR=$TERMUX_TOPDIR/$TERMUX_PKG_NAME/src
TERMUX_PKG_TMPDIR=$TERMUX_TOPDIR/$TERMUX_PKG_NAME/tmp
TERMUX_PKG_HOSTBUILD_DIR=$TERMUX_TOPDIR/$TERMUX_PKG_NAME/host-build
TERMUX_PKG_PLATFORM_INDEPENDENT=""
TERMUX_PKG_NO_DEVELSPLIT=""
TERMUX_PKG_BUILD_REVISION="0" # http://www.debian.org/doc/debian-policy/ch-controlfields.html#s-f-Version
TERMUX_PKG_EXTRA_CONFIGURE_ARGS=""
TERMUX_PKG_EXTRA_HOSTBUILD_CONFIGURE_ARGS=""
TERMUX_PKG_EXTRA_MAKE_ARGS=""
TERMUX_PKG_BUILD_IN_SRC=""
TERMUX_PKG_RM_AFTER_INSTALL=""
TERMUX_PKG_DEPENDS=""
TERMUX_PKG_HOMEPAGE=""
TERMUX_PKG_DESCRIPTION="FIXME:Add description"
TERMUX_PKG_FOLDERNAME=""
TERMUX_PKG_KEEP_STATIC_LIBRARIES="false"
TERMUX_PKG_KEEP_HEADER_FILES="false"
TERMUX_PKG_ESSENTIAL=""
TERMUX_PKG_CONFFILES=""
# Set if a host build should be done in TERMUX_PKG_HOSTBUILD_DIR:
TERMUX_PKG_HOSTBUILD=""
TERMUX_PKG_MAINTAINER="Fredrik Fornwall <fredrik@fornwall.net>"
# Cleanup old state
rm -Rf $TERMUX_PKG_BUILDDIR $TERMUX_PKG_PACKAGEDIR $TERMUX_PKG_SRCDIR $TERMUX_PKG_TMPDIR $TERMUX_PKG_MASSAGEDIR
# Ensure folders present (but not $TERMUX_PKG_SRCDIR, it will be created in build)
mkdir -p $TERMUX_PKG_BUILDDIR $TERMUX_PKG_PACKAGEDIR $TERMUX_PKG_TMPDIR $TERMUX_PKG_CACHEDIR $TERMUX_PKG_MASSAGEDIR $PKG_CONFIG_LIBDIR $TERMUX_PREFIX/{bin,lib,share,tmp}
# If $TERMUX_PREFIX already exists, it may have been built for a different arch
TERMUX_ARCH_FILE=/data/TERMUX_ARCH
if [ -f "${TERMUX_ARCH_FILE}" ]; then
TERMUX_PREVIOUS_ARCH=`cat $TERMUX_ARCH_FILE`
if [ $TERMUX_PREVIOUS_ARCH != $TERMUX_ARCH ]; then
TERMUX_DATA_BACKUPDIRS=$TERMUX_TOPDIR/_databackups
mkdir -p $TERMUX_DATA_BACKUPDIRS
TERMUX_DATA_PREVIOUS_BACKUPDIR=$TERMUX_DATA_BACKUPDIRS/$TERMUX_PREVIOUS_ARCH
TERMUX_DATA_CURRENT_BACKUPDIR=$TERMUX_DATA_BACKUPDIRS/$TERMUX_ARCH
echo "NOTE: Different archs - building for $TERMUX_ARCH, but current $TERMUX_PREVIOUS_ARCH"
echo " Saving current /data/data to $TERMUX_DATA_PREVIOUS_BACKUPDIR"
# Save current /data (removing old backup if any)
if test -e $TERMUX_DATA_PREVIOUS_BACKUPDIR; then
echo "ERROR: Directory already exists"
exit 1
fi
mv /data/data $TERMUX_DATA_PREVIOUS_BACKUPDIR
# Restore new one (if any)
if [ -d $TERMUX_DATA_CURRENT_BACKUPDIR ]; then
echo " Restoring old backupdir from $TERMUX_DATA_CURRENT_BACKUPDIR"
mv $TERMUX_DATA_CURRENT_BACKUPDIR /data/data
fi
fi
fi
echo $TERMUX_ARCH > $TERMUX_ARCH_FILE
if [ ! -f $PKG_CONFIG ]; then
echo "Creating pkg-config wrapper..."
# We use path to host pkg-config to avoid picking up a cross-compiled pkg-config later on
_HOST_PKGCONFIG=`which pkg-config`
mkdir -p $TERMUX_STANDALONE_TOOLCHAIN/bin $PKG_CONFIG_LIBDIR
cat > $PKG_CONFIG <<HERE
#!/bin/sh
export PKG_CONFIG_DIR=
export PKG_CONFIG_LIBDIR=$PKG_CONFIG_LIBDIR
# export PKG_CONFIG_SYSROOT_DIR=${TERMUX_PREFIX}
exec $_HOST_PKGCONFIG "\$@"
HERE
chmod +x $PKG_CONFIG
# Add a pkg-config file for the system zlib
cat > $PKG_CONFIG_LIBDIR/zlib.pc <<HERE
Name: zlib
Description: zlib compression library
Version: 1.2.3
Requires:
Libs: -L$TERMUX_STANDALONE_TOOLCHAIN/sysroot/usr/lib -lz
Cflags: -I$TERMUX_STANDALONE_TOOLCHAIN/sysroot/usr/include
HERE
sleep 1 # Sleep so that zlib.c get older timestamp then TERMUX_BUILD_TS_FILE.
fi
TERMUX_ELF_CLEANER=$TERMUX_COMMON_CACHEDIR/termux-elf-cleaner
if [ ! -f $TERMUX_ELF_CLEANER ]; then
g++ -std=c++11 -Wall -Wextra -pedantic -Os $TERMUX_SCRIPTDIR/packages/termux-tools/termux-elf-cleaner.cpp -o $TERMUX_ELF_CLEANER
fi
# Keep track of when build started so we can see what files have been created
export TERMUX_BUILD_TS_FILE=$TERMUX_PKG_TMPDIR/timestamp_$TERMUX_PKG_NAME
rm -f $TERMUX_BUILD_TS_FILE && touch $TERMUX_BUILD_TS_FILE
# Run just after sourcing $TERMUX_PKG_BUILDER_SCRIPT
termux_step_extract_package () {
if [ -z "${TERMUX_PKG_SRCURL:=""}" ]; then
mkdir -p $TERMUX_PKG_SRCDIR
return
fi
cd $TERMUX_PKG_TMPDIR
filename=`basename $TERMUX_PKG_SRCURL`
file=$TERMUX_PKG_CACHEDIR/$filename
# Set "TERMUX_PKG_NO_SRC_CACHE=yes" in package to never cache packages, such as in git builds:
test -n ${TERMUX_PKG_NO_SRC_CACHE-""} -o ! -f $file && curl --retry 3 -o $file -L $TERMUX_PKG_SRCURL
if [ "x$TERMUX_PKG_FOLDERNAME" = "x" ]; then
folder=`basename $filename .tar.bz2` && folder=`basename $folder .tar.gz` && folder=`basename $folder .tar.xz` && folder=`basename $folder .tar.lz` && folder=`basename $folder .tgz` && folder=`basename $folder .zip`
folder=`echo $folder | sed 's/_/-/'` # dpkg uses _ in tar filename, but - in folder
else
folder=$TERMUX_PKG_FOLDERNAME
fi
rm -Rf $folder
if [ ${file##*.} = zip ]; then
unzip $file
else
$TERMUX_TAR xf $file
fi
mv $folder $TERMUX_PKG_SRCDIR
}
termux_step_post_extract_package () {
return
}
# Perform a host build. Will be called in $TERMUX_PKG_HOSTBUILD_DIR.
# After termux_step_post_extract_package() and before termux_step_patch_package()
termux_step_host_build () {
$TERMUX_PKG_SRCDIR/configure ${TERMUX_PKG_EXTRA_HOSTBUILD_CONFIGURE_ARGS}
make
}
# This should not be overridden
termux_step_patch_package () {
cd $TERMUX_PKG_SRCDIR
# Suffix patch with ".patch32" or ".patch64" to only apply for these bitnesses:
for patch in $TERMUX_PKG_BUILDER_DIR/*.patch{$TERMUX_ARCH_BITS,}; do
test -f $patch && sed "s%\@TERMUX_PREFIX\@%${TERMUX_PREFIX}%g" $patch | patch -p1
done
find . -name config.sub -exec chmod u+w '{}' \; -exec cp $TERMUX_COMMON_CACHEDIR/config.sub '{}' \;
find . -name config.guess -exec chmod u+w '{}' \; -exec cp $TERMUX_COMMON_CACHEDIR/config.guess '{}' \;
}
termux_step_pre_configure () {
return
}
termux_step_configure () {
if [ ! -e $TERMUX_PKG_SRCDIR/configure ]; then
return
fi
DISABLE_STATIC="--disable-static"
if [ "$TERMUX_PKG_EXTRA_CONFIGURE_ARGS" != "${TERMUX_PKG_EXTRA_CONFIGURE_ARGS/--enable-static/}" ]; then
# Do not --disable-static if package explicitly enables it (e.g. gdb needs enable-static to build)
DISABLE_STATIC=""
fi
DISABLE_NLS="--disable-nls"
if [ "$TERMUX_PKG_EXTRA_CONFIGURE_ARGS" != "${TERMUX_PKG_EXTRA_CONFIGURE_ARGS/--enable-nls/}" ]; then
# Do not --disable-nls if package explicitly enables it (for gettext itself)
DISABLE_NLS=""
fi
ENABLE_SHARED="--enable-shared"
if [ "$TERMUX_PKG_EXTRA_CONFIGURE_ARGS" != "${TERMUX_PKG_EXTRA_CONFIGURE_ARGS/--disable-shared/}" ]; then
ENABLE_SHARED=""
fi
HOST_FLAG="--host=$TERMUX_HOST_PLATFORM"
if [ "$TERMUX_PKG_EXTRA_CONFIGURE_ARGS" != "${TERMUX_PKG_EXTRA_CONFIGURE_ARGS/--host=/}" ]; then
HOST_FLAG=""
fi
# Some packages provides a $PKG-config script which some configure scripts pickup instead of pkg-config:
mkdir $TERMUX_PKG_TMPDIR/config-scripts
for f in $TERMUX_PREFIX/bin/*config; do
test -f $f && cp $f $TERMUX_PKG_TMPDIR/config-scripts
done
set +e +o pipefail
find $TERMUX_PKG_TMPDIR/config-scripts | xargs file | grep -F " script" | cut -f 1 -d : | xargs sed -i -E "s@^#\!/system/bin/sh@#\!/bin/sh@"
set -e -o pipefail
export PATH=$TERMUX_PKG_TMPDIR/config-scripts:$PATH
$TERMUX_PKG_SRCDIR/configure \
--disable-dependency-tracking \
--prefix=$TERMUX_PREFIX \
--disable-rpath --disable-rpath-hack \
$HOST_FLAG \
$TERMUX_PKG_EXTRA_CONFIGURE_ARGS \
$DISABLE_NLS \
$ENABLE_SHARED \
$DISABLE_STATIC \
--libexecdir=$TERMUX_PREFIX/libexec
}
termux_step_post_configure () {
return
}
termux_step_pre_make () {
return
}
termux_step_make () {
if ls *akefile &> /dev/null; then
if [ -z "$TERMUX_PKG_EXTRA_MAKE_ARGS" ]; then
make -j $TERMUX_MAKE_PROCESSES
else
make -j $TERMUX_MAKE_PROCESSES ${TERMUX_PKG_EXTRA_MAKE_ARGS}
fi
fi
}
termux_step_make_install () {
if ls *akefile &> /dev/null; then
: ${TERMUX_PKG_MAKE_INSTALL_TARGET:="install"}:
# Some packages have problem with parallell install, and it does not buy much, so use -j 1.
if [ -z "$TERMUX_PKG_EXTRA_MAKE_ARGS" ]; then
make -j 1 ${TERMUX_PKG_MAKE_INSTALL_TARGET}
else
make -j 1 ${TERMUX_PKG_EXTRA_MAKE_ARGS} ${TERMUX_PKG_MAKE_INSTALL_TARGET}
fi
fi
}
termux_step_post_make_install () {
return
}
termux_step_extract_into_massagedir () {
TARBALL_ORIG=$TERMUX_PKG_PACKAGEDIR/${TERMUX_PKG_NAME}_orig.tar.gz
# Build diff tar with what has changed during the build:
cd $TERMUX_PREFIX
$TERMUX_TAR -N $TERMUX_BUILD_TS_FILE -czf $TARBALL_ORIG .
# Extract tar in order to massage it
mkdir -p $TERMUX_PKG_MASSAGEDIR/$TERMUX_PREFIX
cd $TERMUX_PKG_MASSAGEDIR/$TERMUX_PREFIX
$TERMUX_TAR xf $TARBALL_ORIG
}
termux_step_massage () {
cd $TERMUX_PKG_MASSAGEDIR/$TERMUX_PREFIX
# Remove lib/charset.alias which is installed by gettext-using packages:
rm -f lib/charset.alias
# Remove non-english man pages:
test -d share/man && (cd share/man; for f in `ls | grep -v man`; do rm -Rf $f; done )
# Remove info pages and other docs:
rm -Rf share/info share/doc share/locale
# Remove old kept libraries (readline):
find . -name '*.old' -delete
# .. remove static libraries:
if [ $TERMUX_PKG_KEEP_STATIC_LIBRARIES = "false" ]; then
find . -name '*.a' -delete
find . -name '*.la' -delete
fi
# .. move over sbin to bin
for file in sbin/*; do if test -f $file; then mv $file bin/; fi; done
# file(1) may fail for certain unusual files, so disable pipefail
set +e +o pipefail
# Remove world permissions and add write permissions:
find . -exec chmod u+w,o-rwx \{\} \;
# .. strip binaries (setting them as writeable first)
if [ "$TERMUX_DEBUG" = "" ]; then
find . -type f | xargs file | grep -E "(executable|shared object)" | grep ELF | cut -f 1 -d : | xargs $STRIP --strip-unneeded --preserve-dates -R '.gnu.version*'
fi
# Remove DT_ entries which the android 5.1 linker warns about:
find . -type f | xargs $TERMUX_ELF_CLEANER
# Fix shebang paths:
for file in `find . -type f`; do
head -c 100 $file | grep -E "^#\!.*\\/bin\\/.*" | grep -q -E -v "^#\! ?\\/system" && sed --follow-symlinks -i -E "s@^#\!(.*)/bin/(.*)@#\!$TERMUX_PREFIX/bin/\2@" $file
done
set -e -o pipefail
test ! -z "$TERMUX_PKG_RM_AFTER_INSTALL" && rm -Rf $TERMUX_PKG_RM_AFTER_INSTALL
find . -type d -empty -delete # Remove empty directories
# Sub packages:
if [ -d include -a -z "${TERMUX_PKG_NO_DEVELSPLIT}" ]; then
# Add virtual -dev sub package if there are include files:
_DEVEL_SUBPACKAGE_FILE=$TERMUX_PKG_TMPDIR/${TERMUX_PKG_NAME}-dev.subpackage.sh
echo TERMUX_SUBPKG_INCLUDE=\"include share/man/man3 lib/pkgconfig share/aclocal\" > $_DEVEL_SUBPACKAGE_FILE
echo TERMUX_SUBPKG_DESCRIPTION=\"Development files for ${TERMUX_PKG_NAME}\" >> $_DEVEL_SUBPACKAGE_FILE
echo TERMUX_SUBPKG_DEPENDS=\"$TERMUX_PKG_NAME\" >> $_DEVEL_SUBPACKAGE_FILE
fi
# Now build all sub packages
rm -Rf $TERMUX_TOPDIR/$TERMUX_PKG_NAME/subpackages
for subpackage in $TERMUX_PKG_BUILDER_DIR/*.subpackage.sh $TERMUX_PKG_TMPDIR/*subpackage.sh; do
test ! -f $subpackage && continue
SUB_PKG_NAME=`basename $subpackage .subpackage.sh`
# Default value is same as main package, but sub package may override:
TERMUX_SUBPKG_PLATFORM_INDEPENDENT=$TERMUX_PKG_PLATFORM_INDEPENDENT
echo "$SUB_PKG_NAME => $subpackage"
SUB_PKG_DIR=$TERMUX_TOPDIR/$TERMUX_PKG_NAME/subpackages/$SUB_PKG_NAME
TERMUX_SUBPKG_DEPENDS=""
SUB_PKG_MASSAGE_DIR=$SUB_PKG_DIR/massage/$TERMUX_PREFIX
SUB_PKG_PACKAGE_DIR=$SUB_PKG_DIR/package
mkdir -p $SUB_PKG_MASSAGE_DIR $SUB_PKG_PACKAGE_DIR
. $subpackage
for includeset in $TERMUX_SUBPKG_INCLUDE; do
_INCLUDE_DIRSET=`dirname $includeset`
test "$_INCLUDE_DIRSET" = "." && _INCLUDE_DIRSET=""
if [ -e $includeset ]; then
mkdir -p $SUB_PKG_MASSAGE_DIR/$_INCLUDE_DIRSET
mv $includeset $SUB_PKG_MASSAGE_DIR/$_INCLUDE_DIRSET
fi
done
SUB_PKG_ARCH=$TERMUX_ARCH
test -n "$TERMUX_SUBPKG_PLATFORM_INDEPENDENT" && SUB_PKG_ARCH=all
cd $SUB_PKG_DIR/massage
SUB_PKG_INSTALLSIZE=`du -sk . | cut -f 1`
$TERMUX_TAR --xz -cf $SUB_PKG_PACKAGE_DIR/data.tar.xz .
mkdir -p DEBIAN
cd DEBIAN
cat > control <<HERE
Package: $SUB_PKG_NAME
Architecture: ${SUB_PKG_ARCH}
Installed-Size: ${SUB_PKG_INSTALLSIZE}
Maintainer: $TERMUX_PKG_MAINTAINER
Version: $TERMUX_PKG_FULLVERSION
Description: $TERMUX_SUBPKG_DESCRIPTION
Homepage: $TERMUX_PKG_HOMEPAGE
HERE
test ! -z "$TERMUX_SUBPKG_DEPENDS" && echo "Depends: $TERMUX_SUBPKG_DEPENDS" >> control
$TERMUX_TAR -czf $SUB_PKG_PACKAGE_DIR/control.tar.gz .
# Create the actual .deb file:
TERMUX_SUBPKG_DEBFILE=$TERMUX_COMMON_DEBDIR/${SUB_PKG_NAME}-${TERMUX_PKG_FULLVERSION}_${SUB_PKG_ARCH}.deb
ar cr $TERMUX_SUBPKG_DEBFILE \
$TERMUX_COMMON_CACHEDIR/debian-binary \
$SUB_PKG_PACKAGE_DIR/control.tar.gz \
$SUB_PKG_PACKAGE_DIR/data.tar.xz
if [ "$TERMUX_PROCESS_DEB" != "" ]; then
$TERMUX_PROCESS_DEB $TERMUX_SUBPKG_DEBFILE
fi
# Go back to main package:
cd $TERMUX_PKG_MASSAGEDIR/$TERMUX_PREFIX
done
# .. remove empty directories (NOTE: keep this last):
find . -type d -empty -delete
# Make sure user can read and write all files (problem with dpkg otherwise):
chmod -R u+rw .
}
termux_step_post_massage () {
return
}
termux_step_create_debscripts () {
return
}
source $TERMUX_PKG_BUILDER_SCRIPT
# Compute full version:
TERMUX_PKG_FULLVERSION=$TERMUX_PKG_VERSION
if [ "$TERMUX_PKG_BUILD_REVISION" != "0" -o "$TERMUX_PKG_FULLVERSION" != "${TERMUX_PKG_FULLVERSION/-/}" ]; then
# "0" is the default revision, so only include it if the upstream versions contains "-" itself
TERMUX_PKG_FULLVERSION+="-$TERMUX_PKG_BUILD_REVISION"
fi
# Start by extracting the package src into $TERMUX_PKG_SRCURL:
termux_step_extract_package
# Optional post processing:
termux_step_post_extract_package
# Optional host build:
if [ "x$TERMUX_PKG_HOSTBUILD" != "x" ]; then
cd $TERMUX_PKG_SRCDIR
for patch in $TERMUX_PKG_BUILDER_DIR/*.patch.beforehostbuild; do
test -f $patch && sed "s%\@TERMUX_PREFIX\@%${TERMUX_PREFIX}%g" $patch | patch -p1
done
if [ -f "$TERMUX_PKG_HOSTBUILD_DIR/TERMUX_BUILT_FOR_$TERMUX_PKG_VERSION" ]; then
echo "Using already built host build"
else
mkdir -p $TERMUX_PKG_HOSTBUILD_DIR
cd $TERMUX_PKG_HOSTBUILD_DIR
ORIG_AR=$AR; unset AR
ORIG_AS=$AS; unset AS
ORIG_CC=$CC; unset CC
ORIG_CXX=$CXX; unset CXX
ORIG_CPP=$CPP; unset CPP
ORIG_CFLAGS=$CFLAGS; unset CFLAGS
ORIG_CPPFLAGS=$CPPFLAGS; unset CPPFLAGS
ORIG_CXXFLAGS=$CXXFLAGS; unset CXXFLAGS
ORIG_LDFLAGS=$LDFLAGS; unset LDFLAGS
ORIG_RANLIB=$RANLIB; unset RANLIB
ORIG_LD=$LD; unset LD
ORIG_PKG_CONFIG=$PKG_CONFIG; unset PKG_CONFIG
ORIG_PKG_CONFIG_LIBDIR=$PKG_CONFIG_LIBDIR; unset PKG_CONFIG_LIBDIR
ORIG_STRIP=$STRIP; unset STRIP
termux_step_host_build
touch $TERMUX_PKG_HOSTBUILD_DIR/TERMUX_BUILT_FOR_$TERMUX_PKG_VERSION
export AR=$ORIG_AR
export AS=$ORIG_AS
export CC=$ORIG_CC
export CXX=$ORIG_CXX
export CPP=$ORIG_CPP
export CFLAGS=$ORIG_CFLAGS
export CPPFLAGS=$ORIG_CPPFLAGS
export CXXFLAGS=$ORIG_CXXFLAGS
export LDFLAGS=$ORIG_LDFLAGS
export RANLIB=$ORIG_RANLIB
export LD=$ORIG_LD
export PKG_CONFIG=$ORIG_PKG_CONFIG
export PKG_CONFIG_LIBDIR=$ORIG_PKG_CONFIG_LIBDIR
export STRIP=$ORIG_STRIP
fi
fi
if [ "$TERMUX_PKG_DEPENDS" != "${TERMUX_PKG_DEPENDS/libandroid-support/}" ]; then
# If using the android support library, link to it and include its headers as system headers:
export CPPFLAGS="$CPPFLAGS -isystem $TERMUX_PREFIX/include/libandroid-support"
export LDFLAGS="$LDFLAGS -landroid-support"
fi
if [ -n "$TERMUX_PKG_BUILD_IN_SRC" ]; then
echo "Building in src due to TERMUX_PKG_BUILD_IN_SRC being set" >> $TERMUX_PKG_BUILDDIR/BUILDING_IN_SRC.txt
TERMUX_PKG_BUILDDIR=$TERMUX_PKG_SRCDIR
fi
cd $TERMUX_PKG_BUILDDIR
termux_step_patch_package
cd $TERMUX_PKG_BUILDDIR
termux_step_pre_configure
cd $TERMUX_PKG_BUILDDIR
termux_step_configure
cd $TERMUX_PKG_BUILDDIR
termux_step_post_configure
cd $TERMUX_PKG_BUILDDIR
termux_step_pre_make
cd $TERMUX_PKG_BUILDDIR
termux_step_make
cd $TERMUX_PKG_BUILDDIR
termux_step_make_install
cd $TERMUX_PKG_BUILDDIR
termux_step_post_make_install
cd $TERMUX_PKG_MASSAGEDIR
termux_step_extract_into_massagedir
termux_step_massage
termux_step_post_massage
# Create data tarball containing files to package:
cd $TERMUX_PKG_MASSAGEDIR
if [ "`find . -type f`" = "" ]; then
echo "ERROR: No files in package"
exit 1
fi
$TERMUX_TAR --xz -cf $TERMUX_PKG_PACKAGEDIR/data.tar.xz .
# Get install size. This will be written as the "Installed-Size" deb field so is measured in 1024-byte blocks:
TERMUX_PKG_INSTALLSIZE=`du -sk . | cut -f 1`
# Create deb package:
# NOTE: From here on TERMUX_ARCH is set to "all" if TERMUX_PKG_PLATFORM_INDEPENDENT is set by the package
test -n "$TERMUX_PKG_PLATFORM_INDEPENDENT" && TERMUX_ARCH=all
cd $TERMUX_PKG_MASSAGEDIR
mkdir -p DEBIAN
cat > DEBIAN/control <<HERE
Package: $TERMUX_PKG_NAME
Architecture: ${TERMUX_ARCH}
Installed-Size: ${TERMUX_PKG_INSTALLSIZE}
Maintainer: $TERMUX_PKG_MAINTAINER
Version: $TERMUX_PKG_FULLVERSION
Description: $TERMUX_PKG_DESCRIPTION
Homepage: $TERMUX_PKG_HOMEPAGE
HERE
test ! -z "$TERMUX_PKG_DEPENDS" && echo "Depends: $TERMUX_PKG_DEPENDS" >> DEBIAN/control
test ! -z "$TERMUX_PKG_ESSENTIAL" && echo "Essential: yes" >> DEBIAN/control
# Create DEBIAN/conffiles (see https://www.debian.org/doc/debian-policy/ap-pkg-conffiles.html):
for f in $TERMUX_PKG_CONFFILES; do echo $TERMUX_PREFIX/$f >> DEBIAN/conffiles; done
# Allow packages to create arbitrary control files:
cd DEBIAN
termux_step_create_debscripts
# Create control.tar.gz
$TERMUX_TAR -czf $TERMUX_PKG_PACKAGEDIR/control.tar.gz .
# In the .deb ar file there should be a file "debian-binary" with "2.0" as the content:
TERMUX_PKG_DEBFILE=$TERMUX_COMMON_DEBDIR/${TERMUX_PKG_NAME}-${TERMUX_PKG_FULLVERSION}_${TERMUX_ARCH}.deb
# Create the actual .deb file:
ar cr $TERMUX_PKG_DEBFILE \
$TERMUX_COMMON_CACHEDIR/debian-binary \
$TERMUX_PKG_PACKAGEDIR/control.tar.gz \
$TERMUX_PKG_PACKAGEDIR/data.tar.xz
if [ "$TERMUX_PROCESS_DEB" != "" ]; then
$TERMUX_PROCESS_DEB $TERMUX_PKG_DEBFILE
fi
echo "termux - build of '$1' done"
test -t 1 && printf "\033]0;$1 - DONE\007"
exit 0