termux-packages/x11-packages/qt5-qtbase/build.sh

218 lines
8.1 KiB
Bash

TERMUX_PKG_HOMEPAGE=https://www.qt.io/
TERMUX_PKG_DESCRIPTION="A cross-platform application and UI framework"
TERMUX_PKG_LICENSE="LGPL-3.0"
TERMUX_PKG_MAINTAINER="Simeon Huang <symeon@librehat.com>"
TERMUX_PKG_VERSION=5.15.3
TERMUX_PKG_REVISION=1
TERMUX_PKG_SRCURL="https://download.qt.io/official_releases/qt/5.15/${TERMUX_PKG_VERSION}/submodules/qtbase-everywhere-opensource-src-${TERMUX_PKG_VERSION}.tar.xz"
TERMUX_PKG_SHA256=26394ec9375d52c1592bd7b689b1619c6b8dbe9b6f91fdd5c355589787f3a0b6
TERMUX_PKG_DEPENDS="dbus, double-conversion, harfbuzz, libandroid-shmem, libandroid-sysv-semaphore, libc++, libice, libicu, libjpeg-turbo, libpng, libsm, libuuid, libx11, libxcb, libxi, libxkbcommon, openssl, pcre2, ttf-dejavu, freetype, xcb-util-image, xcb-util-keysyms, xcb-util-renderutil, xcb-util-wm, zlib, glib"
# gtk3 dependency is a run-time dependency only for the gtk platformtheme subpackage
TERMUX_PKG_BUILD_DEPENDS="gtk3"
TERMUX_PKG_BUILD_IN_SRC=true
TERMUX_PKG_NO_STATICSPLIT=true
TERMUX_PKG_RM_AFTER_INSTALL="
bin/fixqt4headers.pl
bin/syncqt.pl
"
# Replacing the old qt5-base packages
TERMUX_PKG_REPLACES="qt5-base"
TERMUX_PKG_BREAKS="qt5-x11extras, qt5-tools, qt5-declarative"
termux_step_pre_configure () {
if [ "${TERMUX_ARCH}" = "arm" ]; then
## -mfpu=neon causes build failure on ARM.
CFLAGS="${CFLAGS/-mfpu=neon/} -mfpu=vfp"
CXXFLAGS="${CXXFLAGS/-mfpu=neon/} -mfpu=vfp"
fi
## Create qmake.conf suitable for cross-compiling.
sed \
-e "s|@TERMUX_PREFIX@|${TERMUX_PREFIX}|g" \
-e "s|@TERMUX_CC@|${TERMUX_HOST_PLATFORM}-clang|" \
-e "s|@TERMUX_CXX@|${TERMUX_HOST_PLATFORM}-clang++|" \
-e "s|@TERMUX_AR@|llvm-ar|" \
-e "s|@TERMUX_NM@|llvm-nm|" \
-e "s|@TERMUX_OBJCOPY@|llvm-objcopy|" \
-e "s|@TERMUX_PKGCONFIG@|${TERMUX_HOST_PLATFORM}-pkg-config|" \
-e "s|@TERMUX_STRIP@|llvm-strip|" \
-e "s|@TERMUX_CFLAGS@|${CPPFLAGS} ${CFLAGS}|" \
-e "s|@TERMUX_CXXFLAGS@|${CPPFLAGS} ${CXXFLAGS}|" \
-e "s|@TERMUX_LDFLAGS@|${LDFLAGS}|" \
"${TERMUX_PKG_BUILDER_DIR}/qmake.conf" > "${TERMUX_PKG_SRCDIR}/mkspecs/termux-cross/qmake.conf"
}
termux_step_configure () {
unset CC CXX LD CFLAGS LDFLAGS PKG_CONFIG_PATH
"${TERMUX_PKG_SRCDIR}"/configure -v \
-opensource \
-confirm-license \
-release \
-optimized-tools \
-xplatform termux-cross \
-shared \
-no-rpath \
-no-use-gold-linker \
-prefix "${TERMUX_PREFIX}" \
-docdir "${TERMUX_PREFIX}/share/doc/qt" \
-archdatadir "${TERMUX_PREFIX}/lib/qt" \
-datadir "${TERMUX_PREFIX}/share/qt" \
-plugindir "${TERMUX_PREFIX}/libexec/qt" \
-hostbindir "${TERMUX_PREFIX}/opt/qt/cross/bin" \
-hostlibdir "${TERMUX_PREFIX}/opt/qt/cross/lib" \
-I "${TERMUX_PREFIX}/include" \
-I "${TERMUX_PREFIX}/include/glib-2.0" \
-I "${TERMUX_PREFIX}/lib/glib-2.0/include" \
-I "${TERMUX_PREFIX}/include/gio-unix-2.0" \
-I "${TERMUX_PREFIX}/include/cairo" \
-I "${TERMUX_PREFIX}/include/pango-1.0" \
-I "${TERMUX_PREFIX}/include/fribidi" \
-I "${TERMUX_PREFIX}/include/harfbuzz" \
-I "${TERMUX_PREFIX}/include/atk-1.0" \
-I "${TERMUX_PREFIX}/include/pixman-1" \
-I "${TERMUX_PREFIX}/include/uuid" \
-I "${TERMUX_PREFIX}/include/libxml2" \
-I "${TERMUX_PREFIX}/include/freetype2" \
-I "${TERMUX_PREFIX}/include/gdk-pixbuf-2.0" \
-I "${TERMUX_PREFIX}/include/gtk-3.0" \
-L "${TERMUX_PREFIX}/lib" \
-nomake examples \
-no-pch \
-no-accessibility \
-glib \
-gtk \
-icu \
-system-doubleconversion \
-system-pcre \
-system-zlib \
-system-freetype \
-ssl \
-openssl-linked \
-no-system-proxies \
-no-cups \
-system-harfbuzz \
-no-opengl \
-no-vulkan \
-qpa xcb \
-no-eglfs \
-no-gbm \
-no-kms \
-no-linuxfb \
-no-libudev \
-no-evdev \
-no-libinput \
-no-mtdev \
-no-tslib \
-xcb \
-xcb-xlib \
-gif \
-system-libpng \
-system-libjpeg \
-system-sqlite \
-sql-sqlite
}
termux_step_post_make_install() {
#######################################################
##
## Compiling necessary libraries for target.
##
#######################################################
cd "${TERMUX_PKG_SRCDIR}/src/tools/bootstrap" && {
make clean
"${TERMUX_PREFIX}/opt/qt/cross/bin/qmake" \
-spec "${TERMUX_PKG_SRCDIR}/mkspecs/termux-cross" \
DEFINES+="QT_NO_SYSTEMSEMAPHORE"
make -j "${TERMUX_MAKE_PROCESSES}"
install -Dm644 ../../../lib/libQt5Bootstrap.a "${TERMUX_PREFIX}/lib/libQt5Bootstrap.a"
install -Dm644 ../../../lib/libQt5Bootstrap.prl "${TERMUX_PREFIX}/lib/libQt5Bootstrap.prl"
}
cd "${TERMUX_PKG_SRCDIR}/src/tools/bootstrap-dbus" && {
# create the dbus bootstrap archieve but we don't need to install this
make clean
"${TERMUX_PREFIX}/opt/qt/cross/bin/qmake" \
-spec "${TERMUX_PKG_SRCDIR}/mkspecs/termux-cross"
make -j "${TERMUX_MAKE_PROCESSES}"
}
#######################################################
##
## Compiling necessary programs for target.
##
#######################################################
## Note: qmake can be built only on host so it is omitted here.
for i in moc qlalr qvkgen rcc uic qdbuscpp2xml qdbusxml2cpp; do
cd "${TERMUX_PKG_SRCDIR}/src/tools/${i}" && {
make clean
"${TERMUX_PREFIX}/opt/qt/cross/bin/qmake" \
-spec "${TERMUX_PKG_SRCDIR}/mkspecs/termux-cross"
## Ensure that no '-lpthread' specified in makefile.
sed \
-i 's@-lpthread@@g' \
Makefile
## Fix build failure on at least 'i686'.
sed \
-i 's@$(LINK) $(LFLAGS) -o $(TARGET) $(OBJECTS) $(OBJCOMP) $(LIBS)@$(LINK) -o $(TARGET) $(OBJECTS) $(OBJCOMP) $(LIBS) $(LFLAGS) -lz@g' \
Makefile
make -j "${TERMUX_MAKE_PROCESSES}"
install -Dm700 "../../../bin/${i}" "${TERMUX_PREFIX}/bin/${i}"
}
done
unset i
## Unpacking prebuilt qmake from archive.
cd "${TERMUX_PKG_SRCDIR}" && {
tar xf "${TERMUX_PKG_BUILDER_DIR}/prebuilt.tar.xz"
install \
-Dm700 "${TERMUX_PKG_SRCDIR}/bin/qmake-${TERMUX_HOST_PLATFORM}" \
"${TERMUX_PREFIX}/bin/qmake"
}
#######################################################
##
## Fixes & cleanup.
##
#######################################################
# Limit the scope, otherwise it'll touch other Qt files in a dirty host env
for i in Bootstrap Concurrent Core DBus DeviceDiscoverySupport EdidSupport EventDispatcherSupport FbSupport FontDatabaseSupport Gui InputSupport Network PrintSupport ServiceSupport Sql Test ThemeSupport Widget XcbQpa XkbCommonSupport Xml Zlib; do
## Drop QMAKE_PRL_BUILD_DIR because reference the build dir.
find "${TERMUX_PREFIX}/lib" -type f -name "libQt5${i}.prl" \
-exec sed -i -e '/^QMAKE_PRL_BUILD_DIR/d' "{}" \;
done
unset i
sed -i -e '/^QMAKE_PRL_BUILD_DIR/d' "${TERMUX_PREFIX}/opt/qt/cross/lib/libQt5Bootstrap.prl"
## Remove *.la files.
find "${TERMUX_PREFIX}/lib" -iname \*.la -delete
find "${TERMUX_PREFIX}/opt/qt/cross/lib" -iname \*.la -delete
## Create qmake.conf suitable for compiling host tools (for other modules)
install -Dm644 \
"${TERMUX_PKG_BUILDER_DIR}/qplatformdefs.host.h" \
"${TERMUX_PREFIX}/lib/qt/mkspecs/termux-host/qplatformdefs.h"
sed \
-e "s|@TERMUX_PREFIX@|${TERMUX_PREFIX}|g" \
"${TERMUX_PKG_BUILDER_DIR}/qmake.host.conf" > "${TERMUX_PREFIX}/lib/qt/mkspecs/termux-host/qmake.conf"
}
termux_step_create_debscripts() {
# Some clean-up is happening via `postinst`
# Because we're using this package in both host (Ubuntu glibc) and device (Termux)
cp -f "${TERMUX_PKG_BUILDER_DIR}/postinst" ./
}