sergiotarxz/nuttx-apps
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
804762c72d
nuttx-apps/netutils/netinit/Kconfig

694 lines
21 KiB
Plaintext
Raw Normal View History

This commit removes the private network initialization logic from NSH and puts in a common location at apps/netutils/netinit. Now that netork initialization logic can be used by applications that do not include NSH. Squashed commit of the following: apps/nshlib: Remove NSH initialization. Now uses the common apps/netutils/netinit logic (which was cloned from nshlib to begin with). apps/netutils/netinit: Clone network initialization logic from NSH to this directory so that it can be available for general use.
2019-04-29 18:22:56 +02:00
#
#
# For a description of the syntax of this configuration file,
# see the file kconfig-language.txt in the NuttX tools repository.
#
menuconfig NETUTILS_NETINIT
bool "Network initialization"
default n
depends on NET
apps/graphics/twm4nx: Add options to initialize the system via boardctl() and to bring up the network using the new apps/netutils/netinit. This latter is only necessary because VNC is being used to provide graphics.
2019-04-29 19:49:15 +02:00
select NETUTILS_NETLIB
This commit removes the private network initialization logic from NSH and puts in a common location at apps/netutils/netinit. Now that netork initialization logic can be used by applications that do not include NSH. Squashed commit of the following: apps/nshlib: Remove NSH initialization. Now uses the common apps/netutils/netinit logic (which was cloned from nshlib to begin with). apps/netutils/netinit: Clone network initialization logic from NSH to this directory so that it can be available for general use.
2019-04-29 18:22:56 +02:00
---help---
This option enables/disables all support for common network initialization.
if NETUTILS_NETINIT
config NETINIT_NETLOCAL
bool "Local network initialization"
default n
---help---
If this option is selected, then this logic will only initialize the local
attributes of the network: The MAC address if needed and any IP
addresses as needed. More importantly, it will not do the following:
- It will not bring the network up. That can be done later with the
an ifup() call.
- It will not associate any wireless devices to an access point.
- It will not attempt to obtain an IP address if DHCPC is selected.
This may be done later from the apps/system/dhcpc 'renew' command.
- It will not start the NTPC daemon. This may be done later from
the with the apps/system/ntpc 'ntpcstart' command.
This option permits you to divide the network configuration into two
parts: The local configuration of the network device and the dynamic
configuration of the device in the network. This may be important in
an environment when, for example, you need to manually scan for
available access points and associate the wireless driver with an
access point.
config NETINIT_THREAD
bool "Network initialization thread"
default n
depends on !DISABLE_PTHREAD && !NETINIT_NETLOCAL
---help---
NuttX is brought up through a series of sequential initialization
steps. This includes networking. If the network is available on
reset, then there is really no issue. Negotiating the link will
take only a second or so and the delay to application startup is
normally acceptable.
But if there is no network connected, then the start-up delay can
be very long depending upon things like the particular PHY, driver
timeout delay times and number of retries. A failed negotiation
can potentially take a very long time, perhaps as much as a
minute... Long enough that you might think that the board would
never come up!
One solution is enabled by this option. If NETINIT_THREAD
is selected, the network bring-up will occur in parallel with
netutils/netinit/Kconfig: Fix some typos.
2019-07-24 00:09:31 +02:00
the application on a separate thread. In this case, the application
This commit removes the private network initialization logic from NSH and puts in a common location at apps/netutils/netinit. Now that netork initialization logic can be used by applications that do not include NSH. Squashed commit of the following: apps/nshlib: Remove NSH initialization. Now uses the common apps/netutils/netinit logic (which was cloned from nshlib to begin with). apps/netutils/netinit: Clone network initialization logic from NSH to this directory so that it can be available for general use.
2019-04-29 18:22:56 +02:00
will start immediately with the network becoming available some time
netutils/netinit/Kconfig: Fix some typos.
2019-07-24 00:09:31 +02:00
later (if at all). This thread will terminate once it successfully
initializes the network.
This commit removes the private network initialization logic from NSH and puts in a common location at apps/netutils/netinit. Now that netork initialization logic can be used by applications that do not include NSH. Squashed commit of the following: apps/nshlib: Remove NSH initialization. Now uses the common apps/netutils/netinit logic (which was cloned from nshlib to begin with). apps/netutils/netinit: Clone network initialization logic from NSH to this directory so that it can be available for general use.
2019-04-29 18:22:56 +02:00
NOTES: If no network is connected, the network bring-up will fail
and the network initialization thread will simply exit. There are
no retries and no mechanism to know if the network initialization
was successful. Furthermore, there is currently no support for
detecting loss of network connection. Lots of things to do!
if NETINIT_THREAD
config NETINIT_MONITOR
bool "Monitor link state"
default n
Squashed commit of the following: include/ and netutils/: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. nshlib/: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. system/: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. testing/: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. examples/: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled.
2019-04-29 22:53:38 +02:00
depends on ARCH_PHY_INTERRUPT && NETDEV_PHY_IOCTL && NET_UDP
This commit removes the private network initialization logic from NSH and puts in a common location at apps/netutils/netinit. Now that netork initialization logic can be used by applications that do not include NSH. Squashed commit of the following: apps/nshlib: Remove NSH initialization. Now uses the common apps/netutils/netinit logic (which was cloned from nshlib to begin with). apps/netutils/netinit: Clone network initialization logic from NSH to this directory so that it can be available for general use.
2019-04-29 18:22:56 +02:00
---help---
By default the net initialization thread will bring-up the network
then exit, freeing all of the resources that it required. This is a
good behavior for systems with limited memory.
If this option is selected, however, then the network initialization
thread will persist forever; it will monitor the network status. In
the event that the network goes down (for example, if a cable is
removed), then the thread will monitor the link status and
attempt to bring the network back up. In this case the resources
required for network initialization are never released.
if NETINIT_MONITOR
config NETINIT_SIGNO
int "Notification signal number"
default 18
---help---
The network monitor logic will receive signals when there is any
change in the link status. This setting may be used to customize
that signal number in order to avoid conflicts.
config NETINIT_RETRYMSEC
int "Network bring-up retry period (msec)"
default 2000
---help---
When the network is down, the initialization thread will periodically
try to bring the network up. This can be a time consuming operation
so is done only periodically with that period specified by this
selection in milliseconds.
endif # NETINIT_MONITOR
config NETINIT_THREAD_STACKSIZE
int "Network initialization thread stack size"
Change the default of stack size configs to DEFAULT_TASK_STACKSIZE Where: * Under examples and testing * And the default value is less than 2048 Using a bit more memory for examples and tests should not be a critical problem.
2020-03-27 07:24:32 +01:00
default DEFAULT_TASK_STACKSIZE
This commit removes the private network initialization logic from NSH and puts in a common location at apps/netutils/netinit. Now that netork initialization logic can be used by applications that do not include NSH. Squashed commit of the following: apps/nshlib: Remove NSH initialization. Now uses the common apps/netutils/netinit logic (which was cloned from nshlib to begin with). apps/netutils/netinit: Clone network initialization logic from NSH to this directory so that it can be available for general use.
2019-04-29 18:22:56 +02:00
config NETINIT_THREAD_PRIORITY
int "Network initialization thread priority"
default 80
---help---
This should be set to a priority lower than most tasks. The network
PHY polling is CPU intensive and can interfere with the usability of
of threads competing for CPU bandwidth.
endif # NETINIT_THREAD
config NETINIT_DEBUG
bool "Network init debug"
default n
depends on DEBUG_FEATURES
---help---
Normally debug output is controlled by DEBUG_NET. However, that
will generate a LOT of debug output, especially if CONFIG_DEBUG_INFO is
netutils/netinit/Kconfig: Fix some typos.
2019-07-24 00:09:31 +02:00
also selected. This option is intended to force verbose debug
This commit removes the private network initialization logic from NSH and puts in a common location at apps/netutils/netinit. Now that netork initialization logic can be used by applications that do not include NSH. Squashed commit of the following: apps/nshlib: Remove NSH initialization. Now uses the common apps/netutils/netinit logic (which was cloned from nshlib to begin with). apps/netutils/netinit: Clone network initialization logic from NSH to this directory so that it can be available for general use.
2019-04-29 18:22:56 +02:00
output from the network initialization logic even if CONFIG_DEBUG_NET
or CONFIG_DEBUG_INFO are not selected. This allows for focused, unit-
level debug of the network initialization logic.
# No IP address if 6LOWPAN selected; but Ethernet has precedence.
menu "IP Address Configuration"
depends on NET_ETHERNET || !NET_6LOWPAN
config NETINIT_DHCPC
bool "Use DHCP to get IP address"
default n
depends on NETUTILS_DHCPC
---help---
Obtain the IP address via DHCP.
Per RFC2131 (p. 9), the DHCP client must be prepared to receive DHCP
messages of up to 576 bytes (excluding Ethernet, IP, or UDP headers and FCS).
if NET_IPv4
comment "IPv4 Addresses"
config NETINIT_IPADDR
hex "Target IPv4 address"
default 0x0a000002
depends on !NETINIT_DHCPC
---help---
If NETINIT_DHCPC is NOT set, then the static IP address must be provided.
This is a 32-bit integer value in host order. So, as an example,
0x0a000002 would be 10.0.0.2.
config NETINIT_DRIPADDR
hex "Router IPv4 address"
default 0x0a000001
---help---
Default router IP address (aka, Gateway). This is a 32-bit integer
value in host order. So, as an example, 0x0a000001 would be 10.0.0.1.
config NETINIT_NETMASK
hex "IPv4 Network mask"
default 0xffffff00
---help---
Network mask. This is a 32-bit integer value in host order. So, as
an example, 0xffffff00 would be 255.255.255.0.
endif # NET_IPv4
if NET_IPv6 && !NET_ICMPv6_AUTOCONF
comment "Target IPv6 address"
config NETINIT_IPv6ADDR_1
hex "[0]"
default 0xfc00
range 0x0 0xffff
---help---
If NET_ICMPv6_AUTOCONF is NOT set, then the static IP address must be
provided. This is a 16-bit integer value in host order. Each of the
eight values forming the full IP address must be specified
individually. This is the first of the 8-values. The default for
all eight values is fc00::2.
config NETINIT_IPv6ADDR_2
hex "[1]"
default 0x0000
range 0x0 0xffff
---help---
If NET_ICMPv6_AUTOCONF is NOT set, then the static IP address must be
provided. This is a 16-bit integer value in host order. Each of the
eight values forming the full IP address must be specified
individually. This is the second of the 8-values. The default for
all eight values is fc00::2.
config NETINIT_IPv6ADDR_3
hex "[2]"
default 0x0000
range 0x0 0xffff
---help---
If NET_ICMPv6_AUTOCONF is NOT set, then the static IP address must be
provided. This is a 16-bit integer value in host order. Each of the
eight values forming the full IP address must be specified
individually. This is the third of the 8-values. The default for
all eight values is fc00::2.
config NETINIT_IPv6ADDR_4
hex "[3]"
default 0x0000
range 0x0 0xffff
---help---
If NET_ICMPv6_AUTOCONF is NOT set, then the static IP address must be
provided. This is a 16-bit integer value in host order. Each of the
eight values forming the full IP address must be specified
individually. This is the fourth of the 8-values. The default for
all eight values is fc00::2.
config NETINIT_IPv6ADDR_5
hex "[4]"
default 0x0000
range 0x0 0xffff
---help---
If NET_ICMPv6_AUTOCONF is NOT set, then the static IP address must be
provided. This is a 16-bit integer value in host order. Each of the
eight values forming the full IP address must be specified
individually. This is the fifth of the 8-values. The default for
all eight values is fc00::2.
config NETINIT_IPv6ADDR_6
hex "[5]"
default 0x0000
range 0x0 0xffff
---help---
If NET_ICMPv6_AUTOCONF is NOT set, then the static IP address must be
provided. This is a 16-bit integer value in host order. Each of the
eight values forming the full IP address must be specified
individually. This is the sixth of the 8-values. The default for
all eight values is fc00::2.
config NETINIT_IPv6ADDR_7
hex "[6]"
default 0x0000
range 0x0 0xffff
---help---
If NET_ICMPv6_AUTOCONF is NOT set, then the static IP address must be
provided. This is a 16-bit integer value in host order. Each of the
eight values forming the full IP address must be specified
individually. This is the seventh of the 8-values. The default for
all eight values is fc00::2.
config NETINIT_IPv6ADDR_8
hex "[7]"
default 0x0002
range 0x0 0xffff
---help---
If NET_ICMPv6_AUTOCONF is NOT set, then the static IP address must be
provided. This is a 16-bit integer value in host order. Each of the
eight values forming the full IP address must be specified
individually. This is the last of the 8-values. The default for
all eight values is fc00::2.
comment "Router IPv6 address"
config NETINIT_DRIPv6ADDR_1
hex "[0]"
default 0xfc00
range 0x0 0xffff
---help---
Default router IP address (aka, Gateway). This is a 16-bit integer
value in host order. Each of the eight values forming the full IP
address must be specified individually. This is the first of the
8-values. The default for all eight values is fc00::1.
config NETINIT_DRIPv6ADDR_2
hex "[1]"
default 0x0000
range 0x0 0xffff
---help---
Default router IP address (aka, Gateway). This is a 16-bit integer
value in host order. Each of the eight values forming the full IP
address must be specified individually. This is the second of the
8-values. The default for all eight values is fc00::1.
config NETINIT_DRIPv6ADDR_3
hex "[2]"
default 0x0000
range 0x0 0xffff
---help---
Default router IP address (aka, Gateway). This is a 16-bit integer
value in host order. Each of the eight values forming the full IP
address must be specified individually. This is the third of the
8-values. The default for all eight values is fc00::1.
config NETINIT_DRIPv6ADDR_4
hex "[3]"
default 0x0000
range 0x0 0xffff
---help---
Default router IP address (aka, Gateway). This is a 16-bit integer
value in host order. Each of the eight values forming the full IP
address must be specified individually. This is the fourth of the
8-values. The default for all eight values is fc00::1.
config NETINIT_DRIPv6ADDR_5
hex "[4]"
default 0x0000
range 0x0 0xffff
---help---
Default router IP address (aka, Gateway). This is a 16-bit integer
value in host order. Each of the eight values forming the full IP
address must be specified individually. This is the fifth of the
8-values. The default for all eight values is fc00::1.
config NETINIT_DRIPv6ADDR_6
hex "[5]"
default 0x0000
range 0x0 0xffff
---help---
Default router IP address (aka, Gateway). This is a 16-bit integer
value in host order. Each of the eight values forming the full IP
address must be specified individually. This is the sixth of the
8-values. The default for all eight values is fc00::1.
config NETINIT_DRIPv6ADDR_7
hex "[6]"
default 0x0000
range 0x0 0xffff
---help---
Default router IP address (aka, Gateway). This is a 16-bit integer
value in host order. Each of the eight values forming the full IP
address must be specified individually. This is the seventh of the
8-values. The default for all eight values is fc00::1.
config NETINIT_DRIPv6ADDR_8
hex "[7]"
default 0x0001
range 0x0 0xffff
---help---
Default router IP address (aka, Gateway). This is a 16-bit integer
value in host order. Each of the eight values forming the full IP
address must be specified individually. This is the last of the
8-values. The default for all eight values is fc00::1.
comment "IPv6 Network mask"
config NETINIT_IPv6NETMASK_1
hex "[0]"
default 0xffff
range 0x0 0xffff
---help---
Network mask. This is a 16-bit integer value in host order. Each
of the eight values forming the full IP address must be specified
individually. This is the first of the 8-values. The default for
all eight values is fe00::0.
config NETINIT_IPv6NETMASK_2
hex "[1]"
default 0xffff
range 0x0 0xffff
---help---
Network mask. This is a 16-bit integer value in host order. Each
of the eight values forming the full IP address must be specified
individually. This is the second of the 8-values. The default for
all eight values is fe00::0.
config NETINIT_IPv6NETMASK_3
hex "[2]"
default 0xffff
range 0x0 0xffff
---help---
Network mask. This is a 16-bit integer value in host order. Each
of the eight values forming the full IP address must be specified
individually. This is the third of the 8-values. The default for
all eight values is fe00::0.
config NETINIT_IPv6NETMASK_4
hex "[3]"
default 0xffff
range 0x0 0xffff
---help---
Network mask. This is a 16-bit integer value in host order. Each
of the eight values forming the full IP address must be specified
individually. This is the fourth of the 8-values. The default for
all eight values is fe00::0.
config NETINIT_IPv6NETMASK_5
hex "[4]"
default 0xffff
range 0x0 0xffff
---help---
Network mask. This is a 16-bit integer value in host order. Each
of the eight values forming the full IP address must be specified
individually. This is the fifth of the 8-values. The default for
all eight values is fe00::0.
config NETINIT_IPv6NETMASK_6
hex "[5]"
default 0xffff
range 0x0 0xffff
---help---
Network mask. This is a 16-bit integer value in host order. Each
of the eight values forming the full IP address must be specified
individually. This is the sixth of the 8-values. The default for
all eight values is fe00::0.
config NETINIT_IPv6NETMASK_7
hex "[6]"
default 0xffff
range 0x0 0xffff
---help---
Network mask. This is a 16-bit integer value in host order. Each
of the eight values forming the full IP address must be specified
individually. This is the seventh of the 8-values. The default for
all eight values is fe00::0.
config NETINIT_IPv6NETMASK_8
hex "[7]"
default 0x0000
range 0x0 0xffff
---help---
Network mask. This is a 16-bit integer value in host order. Each
of the eight values forming the full IP address must be specified
individually. This is the eighth of the 8-values. The default for
all eight values is fe00::0.
endif # NET_IPv6 && !NET_ICMPv6_AUTOCONF
endmenu # IP Address Configuration
config NETINIT_DNS
bool "Use DNS"
default n
depends on NETDB_DNSCLIENT
---help---
Configure to use a DNS.
config NETINIT_DNSIPADDR
hex "DNS IP address"
default 0xa0000001
depends on NETINIT_DNS
---help---
Configure the DNS address. This is a 32-bit integer value in host
order. So, as an example, 0xa0000001 would be 10.0.0.1.
config NETINIT_NOMAC
bool "Hardware has no MAC address"
default n
---help---
Set if your Ethernet hardware has no built-in MAC address.
If set, a bogus MAC will be assigned.
if NETINIT_NOMAC
choice
prompt "MAC address selection"
default NETINIT_SWMAC
---help---
If the hardware as no MAC address, then this logic must assign an
address to the hardware before it brings the network up. This
choice allows you select the source of that MAC address.
config NETINIT_SWMAC
bool "Fixed address"
---help---
With this choice, you can assign a fixed MAC address determined by
a NuttX configuration option.
endchoice # MAC address selection
apps/netutils/netinit: MAC address configuration was represented by type long long. That is a problem for architectures that do not support typle long long. Replaces by two long configuration items.
2019-06-03 18:04:44 +02:00
config NETINIT_MACADDR_1
hex "Fixed MAC address (bytes 0-3)"
default 0xdeadbeef
This commit removes the private network initialization logic from NSH and puts in a common location at apps/netutils/netinit. Now that netork initialization logic can be used by applications that do not include NSH. Squashed commit of the following: apps/nshlib: Remove NSH initialization. Now uses the common apps/netutils/netinit logic (which was cloned from nshlib to begin with). apps/netutils/netinit: Clone network initialization logic from NSH to this directory so that it can be available for general use.
2019-04-29 18:22:56 +02:00
depends on NETINIT_SWMAC && (NET_ETHERNET || NET_6LOWPAN)
---help---
If the hardware has no built-in MAC address and if the NETINIT_SWMAC
option is selected, then the fixed, software-assigned MAC address
apps/netutils/netinit: MAC address configuration was represented by type long long. That is a problem for architectures that do not support typle long long. Replaces by two long configuration items.
2019-06-03 18:04:44 +02:00
MAC address must provided with this selection. This setting provides
the least significant 4 bytes of the 6-8 byte MAC address.
config NETINIT_MACADDR_2
hex "Fixed MAC address (bytes 4-5/7)"
default 0x00e0 if NET_ETHERNET
default 0x00fade00 if !NET_ETHERNET && NET_6LOWPAN
depends on NETINIT_SWMAC && (NET_ETHERNET || NET_6LOWPAN)
---help---
If the hardware has no built-in MAC address and if the NETINIT_SWMAC
option is selected, then the fixed, software-assigned MAC address
MAC address must provided with this selection. This setting provides
the least significant 2-4 bytes of the 6-8 byte MAC address.
This commit removes the private network initialization logic from NSH and puts in a common location at apps/netutils/netinit. Now that netork initialization logic can be used by applications that do not include NSH. Squashed commit of the following: apps/nshlib: Remove NSH initialization. Now uses the common apps/netutils/netinit logic (which was cloned from nshlib to begin with). apps/netutils/netinit: Clone network initialization logic from NSH to this directory so that it can be available for general use.
2019-04-29 18:22:56 +02:00
endif # NETINIT_NOMAC
menu "WAPI Configuration"
depends on NET && WIRELESS_WAPI
config NETINIT_WAPI_STAMODE
netinit: Improve WiFi configuration The current WiFi configuration expects user to look at symbols in the wireless headers to configure it. This patch will improve it. Notice that even those symbols that are bitfields are not allowed to have more than 1 bit set at time.
2023-02-16 01:02:00 +01:00
int
default 0 if NETINIT_WAPI_STAMODE_AUTO
default 1 if NETINIT_WAPI_STAMODE_ADHOC
default 2 if NETINIT_WAPI_STAMODE_INFRA
default 3 if NETINIT_WAPI_STAMODE_MASTER
default 4 if NETINIT_WAPI_STAMODE_REPEAT
default 5 if NETINIT_WAPI_STAMODE_MONITOR
default 6 if NETINIT_WAPI_STAMODE_MESH
choice
prompt "Select the WiFi Operation Mode"
default NETINIT_WAPI_STAMODE_INFRA
This commit removes the private network initialization logic from NSH and puts in a common location at apps/netutils/netinit. Now that netork initialization logic can be used by applications that do not include NSH. Squashed commit of the following: apps/nshlib: Remove NSH initialization. Now uses the common apps/netutils/netinit logic (which was cloned from nshlib to begin with). apps/netutils/netinit: Clone network initialization logic from NSH to this directory so that it can be available for general use.
2019-04-29 18:22:56 +02:00
---help---
Mode of operation. See the IW_MODE_* definitions in
include/nuttx/wireless/wireless. The default value corresponds to
IW_MODE_INFRA
netinit: Improve WiFi configuration The current WiFi configuration expects user to look at symbols in the wireless headers to configure it. This patch will improve it. Notice that even those symbols that are bitfields are not allowed to have more than 1 bit set at time.
2023-02-16 01:02:00 +01:00
config NETINIT_WAPI_STAMODE_AUTO
bool "Auto"
config NETINIT_WAPI_STAMODE_ADHOC
bool "Adhoc"
config NETINIT_WAPI_STAMODE_INFRA
bool "Infra"
config NETINIT_WAPI_STAMODE_MASTER
bool "Master"
config NETINIT_WAPI_STAMODE_REPEAT
bool "Repeater"
config NETINIT_WAPI_STAMODE_MONITOR
bool "Monitor"
config NETINIT_WAPI_STAMODE_MESH
bool "Mesh"
endchoice # WiFi Configuration Mode
This commit removes the private network initialization logic from NSH and puts in a common location at apps/netutils/netinit. Now that netork initialization logic can be used by applications that do not include NSH. Squashed commit of the following: apps/nshlib: Remove NSH initialization. Now uses the common apps/netutils/netinit logic (which was cloned from nshlib to begin with). apps/netutils/netinit: Clone network initialization logic from NSH to this directory so that it can be available for general use.
2019-04-29 18:22:56 +02:00
config NETINIT_WAPI_AUTHWPA
netinit: Improve WiFi configuration The current WiFi configuration expects user to look at symbols in the wireless headers to configure it. This patch will improve it. Notice that even those symbols that are bitfields are not allowed to have more than 1 bit set at time.
2023-02-16 01:02:00 +01:00
hex
default 0x00000001 if NETINIT_WAPI_AUTHWPA_DISABLED
default 0x00000002 if NETINIT_WAPI_AUTHWPA_WPA
default 0x00000004 if NETINIT_WAPI_AUTHWPA_WPA2
default 0x00000006 if NETINIT_WAPI_AUTHWPA_WPA_WPA2
choice
prompt "Select the WPA Version"
default NETINIT_WAPI_AUTHWPA_WPA2
This commit removes the private network initialization logic from NSH and puts in a common location at apps/netutils/netinit. Now that netork initialization logic can be used by applications that do not include NSH. Squashed commit of the following: apps/nshlib: Remove NSH initialization. Now uses the common apps/netutils/netinit logic (which was cloned from nshlib to begin with). apps/netutils/netinit: Clone network initialization logic from NSH to this directory so that it can be available for general use.
2019-04-29 18:22:56 +02:00
---help---
IW_AUTH_WPA_VERSION values. See the IW_AUTH_WPA_VERSION_* definitions
in include/nuttx/wireless/wireless. The default value corresponds to
IW_AUTH_WPA_VERSION_WPA2. NOTE that this is a bit-encoded field. The
only valid values are 0x00000001, 0x00000002, and 0x00000004
netinit: Improve WiFi configuration The current WiFi configuration expects user to look at symbols in the wireless headers to configure it. This patch will improve it. Notice that even those symbols that are bitfields are not allowed to have more than 1 bit set at time.
2023-02-16 01:02:00 +01:00
config NETINIT_WAPI_AUTHWPA_DISABLED
bool "Disabled"
config NETINIT_WAPI_AUTHWPA_WPA
bool "WPA Only"
config NETINIT_WAPI_AUTHWPA_WPA2
bool "WPA2 Only"
config NETINIT_WAPI_AUTHWPA_WPA_WPA2
bool "WPA or WPA2"
endchoice # WPA Version
This commit removes the private network initialization logic from NSH and puts in a common location at apps/netutils/netinit. Now that netork initialization logic can be used by applications that do not include NSH. Squashed commit of the following: apps/nshlib: Remove NSH initialization. Now uses the common apps/netutils/netinit logic (which was cloned from nshlib to begin with). apps/netutils/netinit: Clone network initialization logic from NSH to this directory so that it can be available for general use.
2019-04-29 18:22:56 +02:00
config NETINIT_WAPI_CIPHERMODE
netinit: Improve WiFi configuration The current WiFi configuration expects user to look at symbols in the wireless headers to configure it. This patch will improve it. Notice that even those symbols that are bitfields are not allowed to have more than 1 bit set at time.
2023-02-16 01:02:00 +01:00
hex
default 0x00000001 if NETINIT_WAPI_CIPHERMODE_NONE
default 0x00000002 if NETINIT_WAPI_CIPHERMODE_WEP40
default 0x00000004 if NETINIT_WAPI_CIPHERMODE_TKIP
default 0x00000008 if NETINIT_WAPI_CIPHERMODE_CCMP
default 0x00000010 if NETINIT_WAPI_CIPHERMODE_WEP104
default 0x00000020 if NETINIT_WAPI_CIPHERMODE_AES_CMAC
choice
prompt "Select the Cipher Mode"
default NETINIT_WAPI_CIPHERMODE_CCMP
This commit removes the private network initialization logic from NSH and puts in a common location at apps/netutils/netinit. Now that netork initialization logic can be used by applications that do not include NSH. Squashed commit of the following: apps/nshlib: Remove NSH initialization. Now uses the common apps/netutils/netinit logic (which was cloned from nshlib to begin with). apps/netutils/netinit: Clone network initialization logic from NSH to this directory so that it can be available for general use.
2019-04-29 18:22:56 +02:00
---help---
IW_AUTH_PAIRWISE_CIPHER and IW_AUTH_GROUP_CIPHER values. See the
IW_AUTH_CIPHER_* definitions in include/nuttx/wireless/wireless.
The default value corresponds to IW_AUTH_CIPHER_CCMP. NOTE that
this is a bit-encoded field. The only valid values are 0x00000001,
0x00000002,0x00000004, ... 0x00000010
netinit: Improve WiFi configuration The current WiFi configuration expects user to look at symbols in the wireless headers to configure it. This patch will improve it. Notice that even those symbols that are bitfields are not allowed to have more than 1 bit set at time.
2023-02-16 01:02:00 +01:00
config NETINIT_WAPI_CIPHERMODE_NONE
bool "None"
config NETINIT_WAPI_CIPHERMODE_WEP40
bool "WEP40"
config NETINIT_WAPI_CIPHERMODE_TKIP
bool "TKIP"
config NETINIT_WAPI_CIPHERMODE_CCMP
bool "CCMP"
config NETINIT_WAPI_CIPHERMODE_WEP104
bool "WEP104"
config NETINIT_WAPI_CIPHERMODE_AES_CMAC
bool "AES-CMAC"
endchoice # WiFi Cipher
This commit removes the private network initialization logic from NSH and puts in a common location at apps/netutils/netinit. Now that netork initialization logic can be used by applications that do not include NSH. Squashed commit of the following: apps/nshlib: Remove NSH initialization. Now uses the common apps/netutils/netinit logic (which was cloned from nshlib to begin with). apps/netutils/netinit: Clone network initialization logic from NSH to this directory so that it can be available for general use.
2019-04-29 18:22:56 +02:00
config NETINIT_WAPI_ALG
netinit: Improve WiFi configuration The current WiFi configuration expects user to look at symbols in the wireless headers to configure it. This patch will improve it. Notice that even those symbols that are bitfields are not allowed to have more than 1 bit set at time.
2023-02-16 01:02:00 +01:00
int
default 0 if NETINIT_WAPI_ALG_NONE
default 1 if NETINIT_WAPI_ALG_WEP
default 2 if NETINIT_WAPI_ALG_TKIP
default 3 if NETINIT_WAPI_ALG_CCMP
default 4 if NETINIT_WAPI_ALG_IGTK
default 5 if NETINIT_WAPI_ALG_PMK
default 6 if NETINIT_WAPI_ALG_GCMP
default 7 if NETINIT_WAPI_ALG_SMS4
default 8 if NETINIT_WAPI_ALG_KRK
default 9 if NETINIT_WAPI_ALG_GCMP_256
default 10 if NETINIT_WAPI_ALG_CCMP_256
default 11 if NETINIT_WAPI_ALG_GMAC_128
default 12 if NETINIT_WAPI_ALG_GMAC_256
default 13 if NETINIT_WAPI_ALG_CMAC_256
choice
prompt "Select the Crypto Algorithm"
default NETINIT_WAPI_ALG_CCMP
This commit removes the private network initialization logic from NSH and puts in a common location at apps/netutils/netinit. Now that netork initialization logic can be used by applications that do not include NSH. Squashed commit of the following: apps/nshlib: Remove NSH initialization. Now uses the common apps/netutils/netinit logic (which was cloned from nshlib to begin with). apps/netutils/netinit: Clone network initialization logic from NSH to this directory so that it can be available for general use.
2019-04-29 18:22:56 +02:00
---help---
Algorithm. See enum wpa_alg_e in apps/include/wireless/wapi.h. The
default corresponds to WPA_ALG_CCMP.
netinit: Improve WiFi configuration The current WiFi configuration expects user to look at symbols in the wireless headers to configure it. This patch will improve it. Notice that even those symbols that are bitfields are not allowed to have more than 1 bit set at time.
2023-02-16 01:02:00 +01:00
config NETINIT_WAPI_ALG_NONE
bool "None"
config NETINIT_WAPI_ALG_WEP
bool "WEP"
config NETINIT_WAPI_ALG_TKIP
bool "TKIP"
config NETINIT_WAPI_ALG_CCMP
bool "CCMP"
config NETINIT_WAPI_ALG_IGTK
bool "IGTK"
config NETINIT_WAPI_ALG_PMK
bool "PMK"
config NETINIT_WAPI_ALG_GCMP
bool "GCMP"
config NETINIT_WAPI_ALG_SMS4
bool "SMS4"
config NETINIT_WAPI_ALG_KRK
bool "KRK"
config NETINIT_WAPI_ALG_GCMP_256
bool "GCMP-256"
config NETINIT_WAPI_ALG_CCMP_256
bool "CCMP-256"
config NETINIT_WAPI_ALG_GMAC_128
bool "GMAC-128"
config NETINIT_WAPI_ALG_GMAC_256
bool "GMAC-256"
config NETINIT_WAPI_ALG_CMAC_256
bool "CMAC-256"
endchoice # WiFi Algorithm
This commit removes the private network initialization logic from NSH and puts in a common location at apps/netutils/netinit. Now that netork initialization logic can be used by applications that do not include NSH. Squashed commit of the following: apps/nshlib: Remove NSH initialization. Now uses the common apps/netutils/netinit logic (which was cloned from nshlib to begin with). apps/netutils/netinit: Clone network initialization logic from NSH to this directory so that it can be available for general use.
2019-04-29 18:22:56 +02:00
config NETINIT_WAPI_SSID
string "SSID"
netinit: Make the default SSID and passphrase empty * It doesn't make much sense to have the default values for these highly environment-dependent settings. * netutils/netinit/netinit_associate.c calls wpa_driver_wext_associate if the SSID is not empty. Depending on the environment, it can take long to fail. It slows down the boot of some configurations considerably. eg. esp32-devkitc:wapi
2020-12-22 04:54:03 +01:00
default ""
This commit removes the private network initialization logic from NSH and puts in a common location at apps/netutils/netinit. Now that netork initialization logic can be used by applications that do not include NSH. Squashed commit of the following: apps/nshlib: Remove NSH initialization. Now uses the common apps/netutils/netinit logic (which was cloned from nshlib to begin with). apps/netutils/netinit: Clone network initialization logic from NSH to this directory so that it can be available for general use.
2019-04-29 18:22:56 +02:00
config NETINIT_WAPI_PASSPHRASE
string "Passprhase"
netinit: Make the default SSID and passphrase empty * It doesn't make much sense to have the default values for these highly environment-dependent settings. * netutils/netinit/netinit_associate.c calls wpa_driver_wext_associate if the SSID is not empty. Depending on the environment, it can take long to fail. It slows down the boot of some configurations considerably. eg. esp32-devkitc:wapi
2020-12-22 04:54:03 +01:00
default ""
This commit removes the private network initialization logic from NSH and puts in a common location at apps/netutils/netinit. Now that netork initialization logic can be used by applications that do not include NSH. Squashed commit of the following: apps/nshlib: Remove NSH initialization. Now uses the common apps/netutils/netinit logic (which was cloned from nshlib to begin with). apps/netutils/netinit: Clone network initialization logic from NSH to this directory so that it can be available for general use.
2019-04-29 18:22:56 +02:00
endmenu # WAPI Configuration
endif # NETUTILS_NETINIT
Reference in New Issue Copy Permalink