The current calculation easily overflows if the local time is
around the unix epoch. I guess it isn't too unusual for
devices without RTC. Or, the battery is dead. Or, whatever.
This commit avoids the overflow by simply dividing everything by 2.
While more sophisticated and precise solutions are possible,
I feel that they are overkill for this simple implementation.
For example,
The unix epoch (1970) is 0x83aa7e8000000000 in
64-bit NTP timestamp. (1900-origin)
The timestamp now, as of writing this, is 0xe3cda16b00000000.
With the code before this commit, the offset will be:
(lldb) p (long long)((0xe3cda16b00000000 - 0x83aa7e8000000000) + (0xe3cda16b00000000 - 0x83aa7e8000000000)) / 2
(long long) $16 = -2295952992316162048
(lldb)
with the new code, it would be:
(lldb) p (long long)((0xe3cda16b00000000 / 2 - 0x83aa7e8000000000 / 2) + (0xe3cda16b00000 / 2 - 0x83aa7e8000000000 / 2))
(long long) $17 = 6927419044538613760
(lldb)
It's the correct offset from the unix epoch:
(lldb) p 6927419044538613760 >> 32
(long) $0 = 1612915435
(lldb)
spacetanuki% date -r 1612915435
Wed Feb 10 09:03:55 JST 2021
spacetanuki%
Summary:
- I noticed that lc823450-xgevk:rndis does not work with iperf
- Finally, I found that it does not call pthread_join()
- This commit fixes this issue
Impact:
- No impact
Testing:
- Tested with lc823450-xgevk:rndis
- NOTE: need to add iperf in the defconfig
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
The current essid setting(SIOCSIWESSID) are not satisfactory in case
of specified bssid connection, if there are multiple essids with same name,
we need additional bssid information to connect to the specified softap.
The extended flag "WAPI_ESSID_DELAY_ON" instructs the driver to delay the
connection behavior of essid, so that which can accept more accurate
information before generating a connection.
About flow of wapi command, drivers that support WAPI_ESSID_DELAY_ON semantics
will have the following behavior changes:
1. Station mode without bssid set:
$ ifup wlan0
$ wapi mode wlan0 2
$ wapi psk wlan0 12345678 3
$ wapi essid wlan0 archer 1
$ renew wlan0
2. Station mode with bssid set:
$ ifup wlan0
$ wapi mode wlan0 2
$ wapi psk wlan0 12345678 3
$ wapi essid wlan0 archer 2 <----- WAPI_ESSID_DELAY_ON will indicate the driver delay
$ the connection event late to bssid set (SIOCSIWAP).
$ wapi ap wlan0 ec:41:18:e0:76:7e
$ renew wlan0
Signed-off-by: chao.an <anchao@xiaomi.com>
The buffer doesn't have the space for the terminating NUL.
Fix it by replacing it with fwrite, as there seems to be little reason
to use fprintf and NUL-terminated string in the first place.
Allow multiple NTP servers, also with runtime configurable list
Add validation of received NTP packets
NTPv4 support with 'Kiss o' Death' message handling
IPv6 support
Collect multiple NTP samples and filter outsiders
Check if system clock has been altered during NTP (if CONFIG_CLOCK_MONOTONIC)
Signed-off-by: Juha Niskanen <juha.niskanen@haltian.com>
Summary:
- This commit introduces configurable thread priority
- Also, thread policy is set based on RR_INTERVAL
Impact:
- getprime only
Testing:
- Tested with spresense:wifi_smp
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
since romfs can return the soft link with the kernel change:
commit 67ef70d460db4695b950208d861ff47d4a40bdb3
Author: Xiang Xiao <xiaoxiang@xiaomi.com>
Date: Mon Jul 6 00:34:32 2020 +0800
vfs/dirread: Should return the same file type as lstat
by extend the possible value of d_type for the special file
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
This happened frequently for me with Docker Desktop's
/var/run/docker.sock on macOS.
But I believe it can happen on other environments, even with TCP.
Alternatively, this case can be handled by the callback
implementations. But it's simpler to handle the corner case here.
and remove 0001-feat-Switch-to-FreeBSD-getopt-library.patch
since it is already included in the new official release
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Summary:
- This commit fixes compile warnings with Arm GCC 9.3.1
Impact:
- None
Testing:
- Tested with lm3s6965-ek:discover
- NOTE: need to add the following configs
+CONFIG_EXAMPLES_IPERF=y
+CONFIG_EXAMPLES_IPERFTEST_DEVNAME="eth0"
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
should be CONFIG_EXAMPLES_PTYTEST_SERIALDEV, regression in commit:
commit 6ddbffd200
Author: Xiang Xiao <xiaoxiang@xiaomi.com>
Date: Sun Jan 3 23:50:50 2021 -0800
examples/pty_test: Remove O_NONBLOCK from open
to avoid the log storm:
ERROR Failed to read from serial: 11
ERROR Failed to read from serial: 11
ERROR Failed to read from serial: 11
ERROR Failed to read from serial: 11
ERROR Failed to read from serial: 11
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
to avoid the log storm:
ERROR Failed to read from serial: 11
ERROR Failed to read from serial: 11
ERROR Failed to read from serial: 11
ERROR Failed to read from serial: 11
ERROR Failed to read from serial: 11
...
Change-Id: I821743411c33b5412165f1e9020b6c9ce6c24660
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
The examples/webserver app can be built in two modes:
(1) in standalone mode, or
(2) as a NSH built-in app.
When run in standalone mode, the webserver program is responsible for
bringing up the network (including DHCP if configured). Also, the
webserver program must never exit, so if httpd fails (i.e., if
httpd_listen() returns), webserver_main() goes into an endless loop.
When run as a NSH built-in app, network bring-up is the responsibility
of other processes and the webserver program assumes the network is
already properly configured when it starts. Also, if httpd_listen()
returns, the webserver program should terminate.
Prior to this change, the webserver program would *not* terminate,
even when running as a NSH built-in app. For example:
nsh> webserver &
webserver [6:100]
nsh> Starting webserver
nsh> kill -9 6
nsh> webserver_main: Still running
nsh> webserver_main: Still running
nsh> webserver_main: Still running
nsh> webserver_main: Still running
The line "webserver_main: Still running" would be forever printed
every 3 seconds, however httpd_listen() is no longer running and the
webserver is not functional.
This change makes the webserver play nicely when running as a NSH
built-in app. With this change applied:
nsh> webserver &
webserver [6:100]
nsh> Starting webserver
nsh> kill -9 6
nsh> webserver_main: Exiting
apps/examples/webserver/webserver_main.c:
* main(): Infer from CONFIG_NSH_BUILTIN_APPS if this is a
standalone program or a NSH built-in app. (See [1], where
similar logic was added to decide whether to do network bring-up
or not.) If standalone, run forever as before. If built-in
app, exit when httpd terminates.
References:
[1] Commit 3a21b0b222
