sergiotarxz/nuttx-apps
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
4,368 Commits 1 Branch 0 Tags 24 MiB
921131895e
Commit Graph

1370 Commits

Author SHA1 Message Date
Gregory Nutt
fda6713854 graphics/traveler: No longer supports single user graphics mode. 2017-10-14 11:51:58 -06:00
Gregory Nutt
5f7fa0350f examples/lcdrw: Remove this example. It violates the portable OS interface and cannot be retaind. 2017-10-14 11:23:02 -06:00
Gregory Nutt
97e789976e examples/nxtext: The nxtext example no longer supports single user mode. 2017-10-14 11:16:34 -06:00
Gregory Nutt
25ee1352ef examples/nxterm: Minor cleanup 2017-10-14 11:04:44 -06:00
Gregory Nutt
273dd9dd3f examples/nx: The NX example no longer supports single user mode. 2017-10-14 10:55:12 -06:00
Gregory Nutt
fe3e7a7bad examples/ostest: Extend cancellation test to make sure that cancelable threads waiting on a message queue or on a signal can be canceled. 2017-10-12 10:44:06 -06:00
Sebastien Lorquet
e4339355e4 examples/ina219: A simple infinite loop that polls the INA219 sensor and displays the measurements. 2017-10-11 10:49:48 -06:00
Gregory Nutt
cffb1a7f9c Update some comments. 2017-10-11 10:32:59 -06:00
Gregory Nutt
73c10a2607 examples/ostest: Works around a bug in printf() when cancellation points are enabled. printf() is a cancellation point because it calls write(). This is correct according to OpenGroup.org. However, printf holds the stdio library semaphore when it is canceled and this leaves the semaphore in a bad state. No fix for the printf bug yet. 2017-10-10 14:01:49 -06:00
Mateusz Szafoni
ae41122371 Merged in raiden00/apps (pull request #111) 
Add powerled driver example

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2017-10-08 17:31:41 +00:00
Gregory Nutt
1db7d34a84 examples/elf and nxff: Won't build with CONFIG_BUILD_KERNEL because the interface exec() is not available in that configuration. Also, remove a stray comma and a stray semacolon in examples/pty_test/Kconfig and examples/random/Kconfig 2017-10-06 15:13:00 -06:00
Gregory Nutt
926a52bc5e apps/examples/nxflat: A little crap was left in the file from last change. 2017-10-02 14:40:48 -06:00
Gregory Nutt
56814bec38 apps/examples: In elf and nxflat examples, remove low-level interfaces and replace with call to exec(). 2017-10-02 14:32:17 -06:00
Alan Carvalho de Assis
661a593939 apps/examples/flowc: Small improvement to break line if more than 80 . were printed 2017-09-27 12:56:47 -06:00
Alan Carvalho de Assis
0d0d62fca0 apps/examples/flowc: Rename README,.txt to README.txt 2017-09-27 12:52:41 -06:00
Gregory Nutt
21c9b793e2 Add a README file 2017-09-27 06:08:36 -06:00
Gregory Nutt
6a7fddf41d apps/examples/flowc: Add some syslog output to flush the syslog interrupt buffer 2017-09-27 06:00:46 -06:00
Gregory Nutt
ca354f2175 apps/examples/flowc: Fix some errors in receiver's verificationg logic. Add a 'canned' data file so that we don't need to deal with the sender program; we can just 'cat' the canned data file. 2017-09-26 13:13:34 -06:00
Gregory Nutt
d02ec04ff3 Fix some conditional compilation in previous commit. 2017-09-26 10:32:47 -06:00
Gregory Nutt
778ff478e6 apps/examples/flowc: Add a delay between received packets in order to force input flow control. 2017-09-26 10:30:40 -06:00
Alan Carvalho de Assis
873e4ee83e apps/examples/qencode: The QENCODER name was changed to SENSORS_QENCODER fix it here 2017-09-24 14:53:27 -06:00
Gregory Nutt
c221af2f72 Update some comments. 2017-09-23 12:39:01 -06:00
Gregory Nutt
267521af9b Squashed commit of the following: 
apps/examples/flowc:  Adds the necessary termios controls to enable hardware flow control

    apps/examples/flowc:  Add a simple test of serial hardware flow control.  This commit just defines the frame work.  Hardware flow control is not yet enabled.
 2017-09-23 11:02:21 -06:00
Gregory Nutt
450624c370 Squashed commit of the following: 
netutils/netlib:  Add netlib_ipv6adaptor()
    netutils/netlib:  Add netlib_ipv4adaptor()
 2017-09-19 15:21:13 -06:00
Alan Carvalho de Assis
22d43409f2 apps/examples/apa102: Add a Rainbow example for APA102 LED Strip 2017-09-18 17:03:20 -06:00
Gregory Nutt
8beab59e0d Trivial changes from review of last PR. 2017-09-14 15:04:43 -06:00
Florian Olbrich
bbade5522d Merged in floxx/apps (pull request #107) 
Added a simple reader example for the LIS3DSH acceleration sensor on STM32F4Discovery

* Added a simple reader example for the LIS3DSH acceleration sensor as
    found on STM32F4Discovery.

* Edited lis3dsh_reader_main.c to obey nuttx coding standard.

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2017-09-14 20:59:05 +00:00
Gregory Nutt
cb13b7ed1b examples/fb: Extend test to include 1-bpp monochrome. 2017-09-13 10:58:29 -06:00
Gregory Nutt
0fd8ade4b5 Rename CONFIG_AUDIO_DEVICES to CONFIG_DRIVERS_AUDIO to conform better to the evolving configuration naming standard. 2017-09-12 14:11:17 -06:00
Gregory Nutt
0cb9810844 examples/fb: Flesh out the framebuffer driver test. 2017-09-12 11:10:16 -06:00
Gregory Nutt
8ac1952d4c examples/fb: Add a simple test for the framebuffer character driver. This initial commit just verfies some interfaces and initialization logic. Still need to add to graphics update logic. 2017-09-12 09:51:47 -06:00
Masayuki Ishikawa
98fb74b82c examples/adc: Fix g_adcstate.count initialization. 2017-09-11 14:01:09 +09:00
Gregory Nutt
928443e385 examples/ostest: sem_open() now returns SEM_FAILED in the event of a failure. 2017-09-08 10:15:46 -06:00
Gregory Nutt
cdf0528933 examples/dac: Lets use printf instead of _info in application code. 2017-09-01 07:39:39 -06:00
Juha Niskanen
318350d289 examples: add DAC example 2017-09-01 11:22:39 +03:00
Masayuki Ishikawa
25237eafe0 apps/examples/nsh: Remove APPNAME, PRIORITY, and STACKSIZE settings from Makefile to avoid showing nsh in Builtin Apps. 2017-08-26 06:18:03 -06:00
Gregory Nutt
7fa2bd1a23 examples/: Correct naming of some configuration variables. 2017-08-24 13:37:36 -06:00
Gregory Nutt
7c26ee7611 Remove a warning of unused local variable. 2017-08-20 11:15:26 -06:00
Gregory Nutt
41ce937ed0 Changes to netlib and nsh so that you build build with PF_IEEE802154 enabled and 6LoWPAN disabled. 2017-08-20 09:09:47 -06:00
Gregory Nutt
6cbf2b9130 Squashed commit of the following: 
commit 6fbbca4ce308f5d8130d795342c7639555a7e5bf
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Sat Aug 19 08:46:27 2017 -0600

    apps/examples/pf_ieee802154:  Add PANID to command line options; Cannot bind to address zero... There is no counterpart to INADDR_ANY for these radios (not now at least).

commit 354111108a88f549248537e79dbf79998f458ded
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Fri Aug 18 17:47:10 2017 -0600

    PF_IEEE802154:  A few bugfixes

commit f1bb947609ed5e9e8816234653d6c8ee24585079
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Fri Aug 18 15:17:32 2017 -0600

    Add file missed in last commit

commit 9a73930e864db83609b5cc0d7c940d8efeaade66
Merge: 315b888f c433e07a
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Fri Aug 18 12:08:03 2017 -0600

    Merge remote-tracking branch 'origin/master' into pf_ieee802154

commit 315b888f4e72523d90b526edc5a82fb97678ff7e
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Fri Aug 18 12:06:51 2017 -0600

    examples/pf_ieee802154:  Add for testing PF_IEEE802154 sockets.
 2017-08-19 08:47:35 -06:00
Gregory Nutt
7a8561728c The last change added .PRECIOUS: $(BIN) to everyway Makefile in hopes the libapps.a will not be deleted on Control-C (unproven so far). However, $(BIN) may contain back slashes in some build platforms and that causes problems for make: It can't handle the backslashes in the .PRECIOUS dependency list. $(BIN) replaced with ../../libapp.a, where the number of ../ depends on the depth of the Makefile in the apps/ source tree. 2017-08-13 11:03:17 -06:00
Gregory Nutt
a66da34f18 All Makefiles: Add .PRECIOUS: apps/libapps.a to every Makefile. Hopefully this will end awkward problems when you Control-C out of a build and libapps.a is deleted. 2017-08-13 09:35:14 -06:00
Gregory Nutt
0bc7bce916 Eliminate warning about an unused global variable. 2017-08-12 16:40:09 -06:00
Gregory Nutt
4477cbcbd1 Fix some misplaced semicolons as found in build testing. 2017-08-12 14:27:48 -06:00
Gregory Nutt
45eb06c3c2 apps/examples/nximage: Remove unused global variable. 2017-08-12 12:48:38 -06:00
Gregory Nutt
a063227e58 Eliminate a warning about unused static data. 2017-08-12 12:15:21 -06:00
Gregory Nutt
4ee084ab24 Remove references to obsoleted CONFIG_NETDEV_MULTINIC and CONFIG_NETDEV_MULILINK. 2017-08-08 18:37:00 -06:00
Gregory Nutt
69b004790d Update .gitignore 2017-08-08 11:12:19 -06:00
Gregory Nutt
444922ea93 apps/examples/udp: Enable testing with the broadcast address. 2017-08-08 08:16:47 -06:00
Gregory Nutt
0c34ebb72f Typo: USE_NOFITY_POLL -> USE_NOTIFY_POLL 2017-08-02 17:32:27 -06:00
Gregory Nutt
c7e7b42b06 examples/nettest/: Loopback option shoudl be available in Kconfig for PktRadio. 2017-08-01 17:22:01 -06:00
Gregory Nutt
411e053460 Review of last PR. Changes to make consistent with NuttX coding standard. 2017-07-28 09:14:47 -06:00
Giorgio Groß
5f73f290a1 Implement powermonitor example for ltc4151 current and voltage monitor 2017-07-28 15:26:11 +02:00
Gregory Nutt
915b42f870 apps/examples/ipforward: Test extended to test forwarding of ICMPv6 multicast messages. 2017-07-09 12:05:23 -06:00
Gregory Nutt
1657d1fff5 apps/examples/ipforward: A few fixes, but still no cigar. 2017-07-07 17:32:37 -06:00
Gregory Nutt
37bb767089 Completes code for apps/examples/ipforward. Still untested. 2017-07-07 15:00:00 -06:00
Gregory Nutt
47a42852e5 apps/examples/ipforward: Add beginning of an IP forwarding example using only TUN devices. 2017-07-07 15:00:00 -06:00
Gregory Nutt
3e37dbc4ab apps/examples/nettest: Fix incorrectly named file. 2017-07-05 12:52:46 -06:00
Gregory Nutt
abc01c0e5b apps/examples/keypadtest: REMOVED and warehoused in the Obsoleted repository. This was just a bad clone of apps/examples/hidkbd for a keypad driver that was removed years ago.  It also uses illegal function calls into the OS.  So it has no purpse:  It is redundant, it uses illegal interfaces, and is a test for non-existent code. 2017-07-04 15:57:30 -06:00
Gregory Nutt
9aa35b2799 apps/examples/thttpd: Remove the netstats demo. This depends on an illegal function call and cannot be supported. That example could be replaced with logic that uses the procfs network entries as was done for NSH which had the same issue. But I am too lazy to implement that 2017-07-01 08:03:54 -06:00
Gregory Nutt
28415d662b netutils/telnetd and users of telnetd: Add support for IPv6. 2017-06-27 09:14:13 -06:00
Gregory Nutt
342de81641 NSH library: Add a Telnetd command. This is needed when network initialization is deferred. In that case, telnet daemon cannot be started until the network is finally initialized. The telnetd command was added just for that case: So that the telnet daemon can be started from the NSH command line after the network is configured. 2017-06-26 18:00:13 -06:00
Gregory Nutt
ace5bdc7c0 examples/nettest: Add more printf output 2017-06-26 10:54:32 -06:00
Gregory Nutt
6b25b0d65e examples/nettest: Fix some printf output 2017-06-25 13:01:21 -06:00
Gregory Nutt
664ab42da7 examples/udp and examples/nettest: Fix some naming collisions; examples/nettest: Fix some build issues with two targets. 2017-06-25 09:15:27 -06:00
Gregory Nutt
b868fbe879 examples/nettest: The send buffer size is now a configuration option. 2017-06-24 09:49:44 -06:00
Gregory Nutt
3c97bfeae6 examples/nettest: Fixes for building with loopback device again after the last changes. 2017-06-23 19:14:39 -06:00
Gregory Nutt
a3ac695f17 examples/nettest: Add support for both enpoints on target boards vs. one on a target and one on the host PC. 2017-06-23 18:12:34 -06:00
Gregory Nutt
1c0f237c06 examples/nettest: More prep for a second target 2017-06-23 15:49:27 -06:00
Gregory Nutt
cde3cb1544 Forgot to add files before last commit. 2017-06-23 12:30:11 -06:00
Gregory Nutt
a0251ae974 examples/nettest: Fix client/server naming confusion; add command line option to select the server address on the target; examples/udp: Fix naming of a configuration setting 2017-06-23 12:21:13 -06:00
Gregory Nutt
c88cf75064 examples/nettest: Separate out network initialization so that it may, eventually, be used by both a target server and a target client. 2017-06-23 11:40:02 -06:00
Gregory Nutt
41457d6fe8 examples/nettest: Renaming some files to prevent name collision in libapps.a and to prepare to support target boards on both ends of the test 2017-06-23 11:23:43 -06:00
Gregory Nutt
4f64213758 examples/udp: Renaming some files to prevent name collision in libapps.a 2017-06-23 10:58:41 -06:00
Gregory Nutt
593f224950 Merge remote-tracking branch 'origin/master' into ieee802154 2017-06-20 15:11:33 -06:00
Gregory Nutt
c0286c1276 examples/udp: Port numbers need to be configurable to work with 6LoWPAN. Need to bind the client socket to a port number. This was not required before so is a apparently a change in the UDP packet dispatch logic. 2017-06-20 10:40:09 -06:00
Gregory Nutt
62f2b8a7cd examples/smart: Fix some compilation errors. Obviously this test has not been used in a LONG time. 2017-06-20 07:08:27 -06:00
Gregory Nutt
3858a4afd5 examples/udp: Server IP address may not be provided on the command line 2017-06-19 13:29:58 -06:00
Gregory Nutt
d1fb6dec09 examples/udp: Change build so that both server and client can be on a target, rather than one on the target one on the host PC. 2017-06-19 11:58:56 -06:00
Gregory Nutt
bb95584aed examples/udp: Fixe registration as a built-in program; Change some naming to make room for a second target. Current one endpoint is the target and one is the host. This will (eventually) allow two targets to be both endpoints of the test. 2017-06-19 11:03:10 -06:00
Gregory Nutt
7bee5ecec5 examples/udp: Add configurable network device name; Add option to suppress network initialization which is not needed if started by NSH or for 6LoWPAN. 2017-06-19 09:46:40 -06:00
Daniel Agar
ecab40da6a
remove extra semicolons 2017-06-04 12:25:32 -04:00
Gregory Nutt
2984fa3911 apps/system/dhcpc: Add a command to renew or establish a lease on an IPv4 address. 2017-05-21 10:51:26 -06:00
Sebastien Lorquet
ea1025ead2 DHCPC: Remove hard-coded interface device. Now passed as a parameter to dhcpc_open(). 2017-05-19 15:31:22 -06:00
Sebastien Lorquet
297844b1ce Fix comments formatting 2017-05-19 17:50:26 +02:00
Sebastien Lorquet
aefddc3648 Second batch of changes (no problems) 2017-05-19 17:37:17 +02:00
Sebastien Lorquet
caeb6b32fd First batch of changes 2017-05-19 17:30:26 +02:00
Sebastien Lorquet
60ca4a1ef4 Ensure netlib will not be broken when setip will not bring the network up anymore 2017-05-19 17:13:27 +02:00
Juha Niskanen
0bcd50d7a1 apps/: Make more globals static to avoid name clashes 2017-05-19 07:13:12 -06:00
Alan Carvalho de Assis
22f48cfb5e apps/examples/can: ix can example app to print data when CONFIG_EXAMPLE_CAN_READ is defined 2017-05-17 16:07:34 -06:00
EunBong Song
c82d8b61b9 apps/examples/mtdpart: Prevent part array overflow. mtdpart examples create partions and allocate from 1 index not a 0 index to part[] array. This cause buffer overflow for part array. This change fixes this problem. 2017-05-17 08:16:45 -06:00
Gregory Nutt
e8f3d7f46b apps/examples/nettest: Fix an error in pre-processor expression. 2017-05-13 17:51:37 -06:00
Gregory Nutt
b08ea68a33 Move prototype from nuttx/include/nuttx/arch.h to apps/include/platform/cxxinitialize.h 2017-05-13 16:53:33 -06:00
Alan Carvalho de Assis
8011648ad0 Fix to use the new canardInit() function 2017-05-12 16:58:53 -03:00
Alan Carvalho de Assis
ed19c87029 Fix the new can.h header location 2017-05-12 11:58:57 -03:00
Gregory Nutt
13911d9b17 Fix lots of occurrences of 'the the', 'the there', 'the these', 'the then', 'the they. 2017-05-11 13:40:03 -06:00
Juha Niskanen
478049fc4f examples/configdata: add stacksize and priority 2017-05-10 08:44:01 -06:00
Gregory Nutt
f473842f96 Fix some calls to task_create(): argv[0] is the first parameter, not the name of the task. 2017-05-09 10:59:24 -06:00
Juha Niskanen
4d09ebcaec examples: random: avoid stack overflows 2017-04-26 10:32:20 -06:00
Gregory Nutt
9a49304527 examples/hidkbd: Add some missing configuration settings. 2017-04-18 07:24:15 -06:00
Juha Niskanen
65d59f8458 examples/ostest: clarify when pthread clean-up test mutex need to remain usable 2017-04-12 06:47:07 -06:00
Gregory Nutt
cfc71db80c pthreads: Backed most of last pthread changes. Found the 'real' root poblem. A one like error in pthread_mutex.c. 2017-04-10 09:51:44 -06:00
Gregory Nutt
b580d494e8 examples/ostest: pthread clean-up test must call pthread_consistent, not pthread_mutex_unlock() on cancellation if robust mutexes are enabled. 2017-04-10 08:13:06 -06:00
Juha Niskanen
64ad0684e7 examples/ostest: additional test for rwlock and one for cancel cleanup handlers 2017-04-10 07:20:48 -06:00
Mark Schulte
d7932d55df examples/ostest: pthread rwlock additional tests and bugfixes 2017-04-07 15:47:16 -06:00
Gregory Nutt
acb6077988 Remove CONFIG_PTHREAD_RWLOCK. Rwlock interfaces built unconditionally. 2017-04-07 07:30:52 -06:00
Mark Schulte
1fde89e2d9 examples/ostest: Add tests for pthread_rwlock. Adding tests to be used to verify the pthread_rwlock lock works 2017-04-07 07:23:14 -06:00
Gregory Nutt
07338ff2a9 examples/udpblaster: Add logic to bind the local UDP socket to a well-known address. 2017-04-06 11:58:55 -06:00
Gregory Nutt
14fc6d7575 examples/udpblaster: Several fixes to work with 6loWPAN. 2017-04-06 09:37:52 -06:00
Gregory Nutt
74ae283487 examples/nettest: If doing loopback, but not using the official loopback device, then use the server should use the configured client IP address 2017-04-04 15:13:11 -06:00
Gregory Nutt
eef0161dd4 examples/nettest: Trying to adapt to use for testing 6loWPAN. 2017-04-03 15:33:39 -06:00
Jussi Kivilinna
cf395b83b8 Add examples/usrsocktest application for USRSOCK testing 2017-04-03 09:25:49 -06:00
David Sidrane
2168119b73 apps/mm removed extraneous comment from Makefile 2017-03-28 14:36:03 +00:00
Gregory Nutt
c12348ad38 examples/mm: Fix Makefile. Built-in was not being registered. 2017-03-28 07:31:49 -06:00
Gregory Nutt
2c7dff70ec Rename CONFIG_MUTEX_TYPES to CONFIG_PTHREAD_MUTEX_TYPES 2017-03-27 09:08:00 -06:00
Gregory Nutt
531f5e1419 examples/ostest: Fix an error in last commit. 2017-03-27 08:58:23 -06:00
Gregory Nutt
a3fd7fdec0 examples/ostest: Robust mutex test needs to call pthread_mutexattr_setrobust(). 2017-03-27 06:55:51 -06:00
Gregory Nutt
879d269f41 examples/ostest: Add a test of robust mutexes. 2017-03-26 14:45:48 -06:00
Brian Webb
0ad3b3c03b Adds a test program for the XBox One controller driver (xbc_test). 2017-03-17 20:37:45 -07:00
Gregory Nutt
fca6da8248 apps/examples/usbterm: Removed because it is not very useful and because it can be configured to use an illegal call into the OS. 2017-03-09 15:37:16 -06:00
Gregory Nutt
c01db536e9 apps/examples/hidkbd: Remove call to arch_usbhost_initialize(). That is violation of the OS interfacing rules and will no longer be supported. USB host should be initialized as part of the normal board bring-up logic as with any other devices and should not involve illegal calls from applications into the OS. 2017-03-09 15:17:49 -06:00
Anton D. Kachalov
7c206fa16d Add missed dependency 
Signed-off-by: Anton D. Kachalov <mouse@yandex-team.ru>
 2017-03-09 16:52:48 +03:00
ahb
d8199fe460 increase number of supported PWM channels from 4 to 6 2017-03-09 11:52:37 +01:00
Gregory Nutt
ca95abd311 examples/button: Clean up confusing parameter passing. 2017-03-04 08:48:49 -06:00
Masayuki Ishikawa
5382806c5a Remove an unused variable when calling sigwaitinfo() 2017-03-02 13:41:08 +09:00
Masayuki Ishikawa
a05acc1abb Remove an unused variable when calling sigtimedwait() 2017-03-02 13:40:43 +09:00
Gregory Nutt
9eeff9b09a examples/canard: Remove warning for unused label 2017-02-27 09:06:45 -06:00
Gregory Nutt
f5fc7a0a29 C files that reference ANIOC_TRIGGER now need to include nuttx/analog/ioctl.h 2017-02-25 16:39:57 -06:00
Gregory Nutt
b83baa43dc examples/stat: Add test for fstatfs(). 2017-02-17 10:53:24 -06:00
Gregory Nutt
81645fe18f strcasecmp, strncasecmp, bzero, bcmp, and bcopy should be defined in strings.h, not string.h. bzero, bcmp, and bcopy are legacy functions; the contemporary counterparts should be used instead. 2017-02-16 15:58:15 -06:00
Gregory Nutt
9b9a321637 examples/buttons: Eliminate 'too many initializers' warning. 2017-02-16 11:00:43 -06:00
Gregory Nutt
58b521183d apps/examples/stat: Fix a copy-paste error in an ERROR message. 2017-02-13 18:21:56 -06:00
Gregory Nutt
f5b169ee8e apps/examples/stat: Add missing decoding of S_IXOTH bit. 2017-02-13 16:57:41 -06:00
Gregory Nutt
76269d7bad apps/examples/stat: Fix a backward conditional test. Improve output. 2017-02-13 16:46:23 -06:00
Gregory Nutt
78f92746c4 apps/examples/stat: Improve decoding of file mode. 2017-02-13 16:19:55 -06:00
Gregory Nutt
1b297d057e apps/examples/stat: Only should memory if a leak is detected. 2017-02-13 15:24:58 -06:00
Gregory Nutt
c3c8de6b70 apps/examples/stat: Add logic to monitor memory usage. 2017-02-13 14:57:36 -06:00
Gregory Nutt
740b528199 apps/examples/stat: Add a simple test for stat(), fstat(), and statfs(). 2017-02-13 14:08:19 -06:00
Gregory Nutt
ba59c15d00 examples/ostest: Add a test of setvbuf(). 2017-02-09 10:58:51 -06:00
Gregory Nutt
3ab2aec4e8 New apps/examples/module and sotest configuration options 2017-01-30 09:04:01 -06:00
Gregory Nutt
b2210c3a25 In apps/examples/mtdpart/mtdpart_main.c where CONFIG_EXAMPLES_MTDPART_NPARTITIONS defining is checked should be #ifndef instead of #ifdef. Noted by Oleg Evseev 2017-01-30 07:28:51 -06:00
Gregory Nutt
de909c5c48 apps/examples/module and sotest: Update for names changes resulting when module library was split out from kernel module code. 2017-01-29 13:32:39 -06:00
Gregory Nutt
30471a90f5 Update paths in REAME file to account for new location of file 2017-01-29 09:02:07 -06:00
Gregory Nutt
bedf040698 apps/examples/sotest: Fix an error introduced in previous commit 2017-01-27 15:48:15 -06:00
Gregory Nutt
abd0362c64 apps/examples/sotest: Extend test to check out module dependencies. 2017-01-27 15:11:44 -06:00
Gregory Nutt
32211e21b6 apps/examples: Fix some name collisions of both module and sotest examples are enabled. 2017-01-27 11:41:53 -06:00
Gregory Nutt
08b6e087bf examples/sotest: Fix file permissions of mksymtab.sh 2017-01-27 10:34:13 -06:00
Gregory Nutt
497130f372 examples/ostest: Cannot be configured or build if CONFIG_DISABLE_SIGNALS=y 2017-01-24 09:15:42 -06:00
Juha Niskanen
b169bd4641 examples/ostest: Add new error print and modify comments in cancel test. 2017-01-24 09:01:37 -06:00
Gregory Nutt
ad9cf1aa97 Update some Kconfig help 2017-01-23 15:50:37 -06:00
Gregory Nutt
e29db2721a examples/module and examples/sotest can only be used in the FLAT build mode because they make illegal OS calls to ramdisk_register(), register_device(), and unregister_device(). 2017-01-23 14:06:30 -06:00
Gregory Nutt
c027c19dde examples/sotest: Add a test for shared libraries. 2017-01-23 08:23:28 -06:00
Gregory Nutt
d195751a90 Update NSH and examples/modules for changes in kernel module interface. 2017-01-22 15:11:49 -06:00
Gregory Nutt
91fe324c72 apps/examples/nxtext: Make line spacing configurable. 2017-01-03 12:26:13 -06:00
Gregory Nutt
13c158130d OS test: Was ignoring CONFIG_EXAMPLES_OSTEST_FPUTESTDISABLE 2016-12-29 11:47:09 -06:00
Gregory Nutt
1636b48313 OS test: enhance pthread cancellation test some. 2016-12-11 07:51:22 -06:00
Gregory Nutt
5d48dd4871 examples/ostest: Add some delays to the pthread cancellation test. With deferred cancellation enabled, things happen more asynchronously 2016-12-10 16:41:16 -06:00
Gregory Nutt
8586535eb7 examples/ostest: Extend the pthread cancellation test to exercise pthread_cleanup_push() (and pthread_cleanup_pop() indirectly via pthread_cancel() and pthread_exit() 2016-12-08 09:28:49 -06:00
Gregory Nutt
9da9b14d8c Remove an unused label to eliminate a warning. 2016-12-06 13:10:05 -06:00
Gregory Nutt
efedead40b Merge branch 'master' of bitbucket.org:nuttx/apps 2016-12-06 08:55:17 -06:00
Gregory Nutt
cd6a9f8bae Remove BOARDIOC_CAN_INITIALIZE. CAN initialization is now done in the board initialization logic just like every other device driver. 2016-12-06 08:54:38 -06:00
Gregory Nutt
188588e87b Eliminate a warning 2016-12-06 07:16:40 -06:00
Gregory Nutt
a479f9abed Remove all usage of BOARDIOC_ADCTEST_SETUP 2016-12-05 17:12:33 -06:00
Gregory Nutt
ba47896c0f apps/examples/pwm: Remove BOARIOC_PWMSETUP command. 2016-12-05 14:55:41 -06:00
Gregory Nutt
7531568e6d Remove RGMP example. 2016-12-02 09:52:44 -06:00
Gregory Nutt
8374ab4363 Correct a few things from the last commit. 2016-12-01 16:56:47 -06:00
Gregory Nutt
38e3619e21 Graphics: Remove all NX server taks. Instead, call boardctl() to the the NX server kernel thread. 2016-12-01 16:33:45 -06:00
Gregory Nutt
3cce52e361 Update comments. 2016-11-22 08:02:30 -06:00
Gregory Nutt
fcf9e8d7a0 apps/examples/archbuttons: Removed becaue it violates OS interface principles 2016-11-22 07:32:10 -06:00
Sebastien Lorquet
637283d810 The examples/qencoder app was trying to init the encoder by a direct call into the board, cheating in a local header to declare the normally unavailable function prototype. 2016-11-22 07:32:09 -06:00
Gregory Nutt
3a98b97ea6 Revert "apps/examples/ostest: Skip the task_restart() test on SMP systems. This is not fully implemented." 
This reverts commit 0ce49462d1.
 2016-11-20 07:35:22 -06:00
Gregory Nutt
0ce49462d1 apps/examples/ostest: Skip the task_restart() test on SMP systems. This is not fully implemented. 2016-11-19 11:38:49 -06:00
Gregory Nutt
9ce4b6f82e apps/examples/timer: Should detach signal handler before exiting. 2016-11-18 08:17:15 -06:00
Gregory Nutt
cfe6476ac2 Revert "apps/examples: Remove the timer example. It uses a non-portable IOCTL and must be purged." 
This reverts commit dba181d0af.
 2016-11-17 15:04:14 -06:00
Gregory Nutt
dba181d0af apps/examples: Remove the timer example. It uses a non-portable IOCTL and must be purged. 2016-11-17 11:32:28 -06:00
Gregory Nutt
a82c0202bc examples/ostest: Eliminate some warnings 2016-10-26 07:34:30 -06:00
Gregory Nutt
f9d6e176e1 examples/cctype: Clean up KEY 2016-10-22 11:58:09 -06:00
Gregory Nutt
3d581297a3 Fix file date 2016-10-22 11:38:02 -06:00
Gregory Nutt
991defd7bb examples/cctype: Add an example to verify cctype fucntions 2016-10-22 11:35:17 -06:00
Alan Carvalho de Assis
909a4ec2ce Add a new buttons example that uses the button character driver instead of the architecture buttons directly 2016-10-11 14:25:55 -06:00
Alan Carvalho de Assis
f29c444363 Rename examples/buttons to examples/archbuttons 2016-10-11 14:21:08 -06:00
Gregory Nutt
8fc1529ef1 CONFIG_CL_MFR522, not CONFIG_WL_MFR522 2016-10-06 07:46:01 -06:00
Gregory Nutt
796171458f Correct path to header file 2016-10-06 07:31:17 -06:00
Gregory Nutt
b2b8b642b9 apps/examples/system: Add necessary dependency for selected. 2016-08-25 15:31:03 -06:00
Gregory Nutt
b1d44a81b4 apps/system/system: A much larger stack is needed to run reliably on the simulation. 2016-08-25 13:22:06 -06:00
Gregory Nutt
743234ea40 apps/examples/system: Add a simple test of the system command. Fix the first bug discovered by the test. 2016-08-25 12:38:13 -06:00
Gregory Nutt
b9d56991f3 Update some comments. Remove trailing whitespace noted by Michał Łyszczek 2016-08-19 06:25:42 -06:00
Gregory Nutt
2ff22da39d apps/examples/oneshot: A thought about how we might improve accuracy of long delays. 2016-08-15 12:54:05 -06:00
Gregory Nutt
0a6dd4a24e apps/examples/oneshot: If the requested delay is > max_delay, then break the delay up into several pieces. 2016-08-15 11:44:52 -06:00
Gregory Nutt
d8c7a8fff8 apps/examples: Add Oneshot timer example 2016-08-12 14:20:52 -06:00
Alan Carvalho de Assis
93f7809258 Add RFID_READUID sample application 2016-08-06 09:02:57 -06:00
Gregory Nutt
6624917285 Add some dependencies on new settings in apps/examples/pipe 2016-08-04 13:23:31 -06:00
Gregory Nutt
73b0ce0272 apps/exmples/gpio: Should not claim an error if we are only asked to read an output pin 2016-08-03 13:08:58 -06:00
Gregory Nutt
fce37aeafa apps/examples/gpio: Bug fixes from testing 2016-08-01 15:27:48 -06:00
Gregory Nutt
acbbd690f9 apps/examples/gpio: Add a simple test of the GPIO driver 2016-08-01 13:53:20 -06:00
Gregory Nutt
ac018597e4 Fix a syntax error in a Kconfig file. Update comments in another. 2016-07-29 13:12:28 -06:00
Gregory Nutt
a15bd864f5 Move include/nuttx/configdata.h to include/nuttx/mtd/configdata.h 2016-07-21 13:34:19 -06:00
Gregory Nutt
d5b7268d95 ramdisk.h moved from include/fs/nuttx/ to include/nuttx/drivers. 2016-07-20 14:02:41 -06:00
Gregory Nutt
ad9c53d0ed pwm.h moved from include/nuttx/ to include/nuttx/drivers. 2016-07-20 13:48:54 -06:00
Gregory Nutt
0042366255 can.h moved from include/nuttx/ to include/nuttx/drivers. 2016-07-20 13:39:12 -06:00
Gregory Nutt
c25159c0fa Driver related prototypes moved out of include/nuttx/fs/fs.h and into new include/drivers/drivers.h 2016-07-20 13:22:16 -06:00
Gregory Nutt
7d517413cb Things that use mkfifo() and pipe() depend on CONFIG_PIPES 2016-07-20 10:46:05 -06:00
Gregory Nutt
1a6bb2a47c apps/examples/pty_test: If CONFIG_SERIAL_TERMIOS is not selected, then don't call tcgetattr or tcsetattr. 2016-07-19 14:28:07 -06:00
Gregory Nutt
7f6a21ecac Eliminate some warnings 2016-07-18 11:26:45 -06:00
ziggurat29
20446c9e03 minor; media app is intended to take either a command line argument, or a compiled-in default value from config. However, the default is ignored, leading to confusing error messages. 2016-07-17 15:10:26 -05:00
Gregory Nutt
7e2980bee5 Fix comment string 2016-07-17 09:39:26 -06:00
Gregory Nutt
126592b85d apps/examples/pty_test: Use of POLL must be optional. There are still a few character drivers that do not support it. 2016-07-16 13:46:52 -06:00
Alan Carvalho de Assis
8a16e80cf3 apps/examples/pty_test: Add termios calls to convert LF to CR-LF on writes 2016-07-16 12:38:44 -06:00
Gregory Nutt
3cd17bcc7c Fix a couple of cosmetic alignment issues 2016-07-16 11:56:17 -06:00
Alan Carvalho de Assis
49ab72d9ac Extensions to examples/pty_test 2016-07-16 11:24:54 -06:00
Gregory Nutt
552d3c4712 PTY: Fix a few errors from early testing 2016-07-15 14:09:14 -06:00
Alan Carvalho de Assis
e3d0c6f15a apps/examples/pty_test: PTY test program 2016-07-15 13:28:38 -06:00
Sebastien Lorquet
2cbad44f1d This is the Pokemon patch to change all includes fronm <apps/bla/bla.h> to "bla/bla.h" 2016-07-11 10:11:18 -06:00
Matthias Renner
715fb8fa43 add canard app, untested 2016-07-08 07:55:30 -06:00
Gregory Nutt
0f1e86b2fd apps/include/tiff.h moved to apps/include/graphics/tiff.h 2016-07-01 07:03:26 -06:00
Gregory Nutt
0e76ca7474 Move apps/include/nsh.h to apps/include/nshlib/nshlib.h 2016-07-01 06:59:23 -06:00
Gregory Nutt
cd741c82cf apps/include: Move all header files associated with modules in apps/system to apps/include/system 2016-07-01 06:48:22 -06:00
Gregory Nutt
4343a6ef8b Move apps/include/ftpc.h to apps/include/netutils/ftpc.h 2016-07-01 06:36:07 -06:00
Sebastien Lorquet
546c381982 apps/examplex/can: Some variables were not declared in all required cases. 2016-06-23 08:05:06 -06:00
Gregory Nutt
d32f16450d Without lowsyslog() *llerr() is not useful. Eliminate and replace with *err(). 2016-06-20 12:39:46 -06:00
Gregory Nutt
bb06f7368f Without lowsyslog() *llinfo() is not useful. Eliminate and replace with *info(). 2016-06-20 11:48:15 -06:00
Gregory Nutt
6e2f729add Remove lowsyslog(). The new syslog() includes all of the functionality of lowsyslog(). No longer any need for two interfaces. 2016-06-20 08:57:33 -06:00
Gregory Nutt
5098539063 Add _ to front of remaining debug macros 2016-06-16 12:12:34 -06:00
Gregory Nutt
cc03ecefc8 Rename err() to _err() 2016-06-16 11:44:22 -06:00
Gregory Nutt
a63d306549 apps/examples: Change some *err() message to *info() messages if what was a *dbg() message does not indicate and error condition. 2016-06-14 18:23:49 -06:00
Gregory Nutt
586b0aa7e0 Change names of *dbg() * *err() 2016-06-11 15:51:27 -06:00
Gregory Nutt
f4bae25e32 Rename *lldbg to *llerr 2016-06-11 14:55:13 -06:00
Gregory Nutt
e82a54bf18 Reserver the name 'err' for other purposes 2016-06-11 14:49:55 -06:00
Gregory Nutt
468bdcf8e6 Rename CONFIG_DEBUG to CONFIG_DEBUG_FEATURES 2016-06-11 14:13:39 -06:00
Gregory Nutt
344c92e2a4 Replace all occurrences of vdbg with vinfo 2016-06-11 11:55:38 -06:00
Gregory Nutt
56e75e9db8 Rename CONFIG_DEBUG_VERBOSE to CONFIG_DEBUG_INFO 2016-06-11 11:50:38 -06:00
Sebastien Lorquet
d2aa24ad88 Make sure that APPNAME is defined in all Makefiles that generate applications 2016-06-09 10:51:04 -06:00
Gregory Nutt
6c09faedd3 Merge branch 'master' of bitbucket.org:nuttx/apps 2016-06-09 09:14:14 -06:00
Sebastien Lorquet
7ca5478da3 Rearrange to eliminate Kmenu files 2016-06-09 08:59:16 -06:00
Gregory Nutt
0dfe0baf2b apps/examples/ostest: SIG_DFL is no long assignment compatible with the sa_sigaction functin pointer. 2016-06-08 18:02:37 -06:00
Sebastien Lorquet
e9d6683402 Merge branch 'master' into recurse 2016-06-02 16:36:02 +02:00
Sebastien Lorquet
a9aa753fa4 Recursive Kconfig autogeneration 2016-06-02 16:34:00 +02:00
Sebastien Lorquet
bfff5e7179 Add empty preconfig rules to 'leaf' makefiles 2016-06-02 16:24:30 +02:00
Sebastien Lorquet
bfff7dc4ca add kmenu files 2016-06-02 15:23:50 +02:00
Gregory Nutt
59973da9ca apps/examples/alarm: ioctl call was clobbering file descriptor. 2016-06-02 06:58:45 -06:00
Gregory Nutt
7fff9a000a Prep for NuttX-7.16 release 2016-06-01 15:45:56 -06:00
Sebastien Lorquet
6142ed8e61 apps/exmamples/media: Allow choosign the device to be tested via a comman line argument 2016-06-01 08:15:10 -06:00
Paul A. Patience
b2f8a0f047 examples/uavcan: Update configuration 2016-05-25 09:35:28 -04:00
Gregory Nutt
172971fb3c Kconfig: Extend some help comments 2016-05-18 19:50:55 -06:00
Gregory Nutt
62fec5d57d apps/system/sched_note: Move the schduler note monitor from example/ to system/ 2016-05-18 19:22:47 -06:00
Gregory Nutt
4f33dd14d4 apps/examples/watchdog: Remove call to up_wdginitialize(). This must be done in board-specific initialization. The call fram application space is not permitted. 2016-05-18 19:21:51 -06:00
Gregory Nutt
6a68a12269 apps/examplessmp: Fix a place where a spurious semicolon causes bad conditional logic 2016-05-11 17:41:13 -06:00
Gregory Nutt
29e8b8e059 Several Makefiles: Add .PHONY definitions to prevent 'clean up to date' message weirdness; Add default definitions for some commonly used things when 'make clean' is used without .config or Make.defs files installed. 2016-05-10 15:40:20 -06:00
Gregory Nutt
e2654d8777 VNC: Finish initializing the VNC server once we have the NX handle 2016-04-22 13:38:06 -06:00
Gregory Nutt
3df1ea1a8a Merge branch 'master' of bitbucket.org:nuttx/apps 2016-04-22 08:54:51 -06:00
Gregory Nutt
e79f5518dd apps/examples/nximage: Add configuration option to select greyscale image 2016-04-22 08:54:30 -06:00
ziggurat29
5d61e3d6eb heap corruption due to buffer overrun when initializing txbuffer; incorrect size 2016-04-20 20:23:01 -05:00
Gregory Nutt
7308fdcdf2 Framebuffer driver: Add a display number to each interface in order to support multiple displays 2016-04-14 12:23:52 -06:00
Gregory Nutt
8763ff02fb Remove bad commit of a submodule; Also updates a README. 2016-04-06 16:42:49 -06:00
Gregory Nutt
5193d93cf5 apps/examples/alarm: Add a simple the RTC alarm ioctl commands 2016-04-03 09:19:19 -06:00
Gregory Nutt
0c124ca2e1 Fix some Kconfig files so that they authomatically select the correct BOARDCTL options 2016-03-30 07:37:45 -06:00
Gregory Nutt
0943afd2f9 Kconfig files: All USB-related options depend on CONFIG_LIB_BOARDCTRL and now set CONFIG_BOARDCTL_USBDEVCTL=y 2016-03-26 07:13:57 -06:00
Gregory Nutt
6951366eca Replace all calls to the OS internal usbdev_serialinitialize with proper calls to boardctl() 2016-03-25 16:00:28 -06:00
Gregory Nutt
a31300cb05 Replace calls to OS internal cdcacm_*, usbmsc_*, and composite_* with boardctl() calls 2016-03-25 13:26:00 -06:00
Gregory Nutt
f45d5a7ebf Minor changes from review 2016-03-24 11:22:24 -06:00
ziggurat29
bd273b9f13 minor; intialize buffer to well-known patter to make it easy to see if it was truly filled with random data 2016-03-24 11:43:45 -05:00
Gregory Nutt
badbb3ad9a Update a comment 2016-03-22 18:14:08 -06:00
Gregory Nutt
a473ececed apps/examples/sched_note: Fix some issues associated with monitoring critical sections 2016-03-21 17:09:18 -06:00
Gregory Nutt
5a95cb4601 apps/examples/sched_note: Add task state to suspend event output; fix some output formatting errors 2016-03-21 15:25:11 -06:00
Gregory Nutt
b44c9fa174 apps/examples/sched_note: Adjust example for changes to scheduler instrumentation 2016-03-21 14:09:25 -06:00
Gregory Nutt
2443278928 Fix error in time calculation 2016-03-17 16:13:43 -06:00
Gregory Nutt
6a5b6f8753 Add a simple test of the scheduler instrumentation logic. This initial version is still kind of buggy. 2016-03-17 16:02:28 -06:00
Gregory Nutt
84f453b7a1 apps/examples/ostest: Add a test of TLS 2016-03-11 14:02:00 -06:00
Gregory Nutt
4c10341269 apps/exampels/rgb: Make path to driver a configuration option 2016-02-23 07:04:54 -06:00
Alan Carvalho de Assis
855d2e70bf apps/examples/rgbled: Add an example using the RGB LED driver 2016-02-23 06:53:35 -06:00
Gregory Nutt
6125e9376e Standardize some naming in code section comments 2016-02-21 18:15:00 -06:00
Gregory Nutt
431695015e apps/examples/smp: Improvements/fixes 2016-02-21 13:29:25 -06:00
Gregory Nutt
65a6739593 Add test for verifying SMP operation 2016-02-21 11:33:13 -06:00
Gregory Nutt
65a1d53079 Add some REVISIT comments 2016-02-20 14:57:37 -06:00
Gregory Nutt
ec11a454f9 apps/examples/leds: Need to better used of the supported set 2016-02-20 14:06:34 -06:00
Gregory Nutt
6037ed8643 Some fixes to apps/examples/leds 2016-02-20 13:20:22 -06:00
Gregory Nutt
790899508e apps/examples/leds: An example showing how to use the LED driver 2016-02-20 12:11:42 -06:00
Gregory Nutt
7537a963b4 UAVCAN: Add a patch to make the verified version of UAVCAN compatible with the current NuttX code base 2016-02-15 19:11:52 -06:00
Gregory Nutt
d5c3bae6cd apps/: Replace irqsave() with enter_critical_section(); replace irqrestore() with leave_critical_section() 2016-02-14 15:15:37 -06:00
Gregory Nutt
3ef9b14738 Move apps/examples/ubloxmodem to apps/system/ubloxmodem 2016-01-31 09:35:42 -06:00
Vladimir Komendantskiy
02a5e25f56 apps/examples/ubloxmodem: app to control the power state of the modem in nsh. 2016-01-31 09:07:46 -06:00
Vladimir Komendantskiy
387dda152c chat app and required update to the pppd client. 2016-01-29 17:00:59 -06:00
Gregory Nutt
e00bc64c40 Trivial correction of some spacing 2016-01-23 17:04:37 -06:00
Gregory Nutt
e39c85b718 Eliminate a warning about a symbol being redefined 2016-01-23 17:03:46 -06:00
Gregory Nutt
615e640913 More bash scripts executable 2016-01-23 15:30:09 -06:00
Gregory Nutt
fff6765e63 Update some README files 2016-01-22 17:20:15 -06:00
Gregory Nutt
dd53e9ae57 Merged in paulpatience/nuttx-apps/qencoder (pull request #28) 
examples/qencoder: Add configuration options to Kconfig file
 2016-01-19 12:55:53 -06:00
Paul A. Patience
f5da6e23cf examples/qencoder: Add configuration options to Kconfig file 2016-01-19 13:45:33 -05:00
=?UTF-8?B?6ZmI5p6X6aOe?=
f738166b17 examples/watchdog: Some fixes to help text and ping time range 2016-01-19 06:57:34 -06:00
Gregory Nutt
6d8e81e064 examples/can: Fix to work with new CAN error reporting 2016-01-18 12:34:19 -06:00
Gregory Nutt
19efbf8b87 OS test: Mark some constants as long to avoid overflow when used the AVR8. Example, 500*1000 overflows when type int is only 16-bits, but 500*1000L avoids the overflow 2016-01-08 07:48:50 -06:00
Gregory Nutt
96ee336278 apps/examples/hello: Can now select task priority and stacksize 2016-01-06 07:47:08 -06:00
Gregory Nutt
d5f8008931 OS test: Add a test of POSIX timers using SIGEV_THREAD. Also, clean up many warnings with building on a PC with 64-bit addresses 2015-12-30 16:29:21 -06:00
Alan Carvalho de Assis
1308399564 apps/examples/pca9635: Add a simple test of PCA9635PW PWM LED driver. From Alan Carvalho de Assis. 2015-12-15 14:10:21 -06:00
Gregory Nutt
41c673d95d apps/examples/module: cosmetic update to printf statements 2015-12-14 13:21:39 -06:00
Gregory Nutt
f0a21d3d48 NSH: Add module commands: insmod, rmmod, and lsmod 2015-12-13 09:55:52 -06:00
Gregory Nutt
d198f09ae3 Update examples/module and system/symtab to adjust to change in boardctl() and insmod() interfaces 2015-12-13 08:14:44 -06:00
Gregory Nutt
469a7fdf0f examples/module: Update for changes in function prototypes 2015-12-12 17:43:06 -06:00
Gregory Nutt
052392f36c examples/module. Module should not link with libc because it has out-of-range function calls 2015-12-12 14:00:34 -06:00
Gregory Nutt
ad4bcac7a0 apps/examples/module: Some fixes 2015-12-12 11:49:34 -06:00
Gregory Nutt
6c14e176d9 apps/examples/module: Now exercises rmmod as well 2015-12-12 11:40:33 -06:00
Gregory Nutt
d02295d1f2 apps/examples/module: Add a test harness for testing NuttX kernel modules 2015-12-12 09:43:32 -06:00
Gregory Nutt
ba8d44d799 netutils/telnetd: Move the Telnet driver to nuttx/drivers/net 2015-12-07 09:29:29 -06:00
Gregory Nutt
0798b5ff20 Remove more warnings 2015-11-29 15:00:52 -06:00
Gregory Nutt
ee1b1da4be Fix some errors/warnings detected by nuttx/tools/testbuild.sh 2015-11-29 14:41:34 -06:00
Paul A. Patience
32ae747c7b examples/serialrx: Don't print 'Received:\n' before printing bytes received 2015-11-25 10:32:20 -05:00
Gregory Nutt
c195b5415e Merged in paulpatience/nuttx-apps/serialrx (pull request #25) 
examples/serialrx: Add configuration options to print the bytes received
 2015-11-24 16:09:53 -06:00
Paul A. Patience
e6137fc615 examples/serialrx: Add configuration options to print the bytes received 2015-11-24 16:36:00 -05:00
Gregory Nutt
7e43708e9c Remove unnecessary inclusion of nxtk.h 2015-11-24 07:56:20 -06:00
Ken Pettit
efbbd7bac0 examples/smart-test: Adds a circular log type test for SMARTFS wear level code testing. From Ken Petit 2015-11-22 17:22:05 -06:00
Ken Pettit
cbe1b3a415 drivers/mtd/smart.c Fixed SmartFS wear level error that occurs when the logical sector size is too small to save all wear level status bytes in a single sector. Logical sectors 1 and 2 were simply not being allocated and then the read_sector and write_sector routines were failing. From Ken Petit 2015-11-18 18:20:42 -06:00
Gregory Nutt
cfc38a45fa Remove inclusion of removed header file 2015-11-17 16:30:57 -06:00
Gregory Nutt
f8621e623d examples/media: If it is an MTD device, then do a bulk erase first 2015-11-13 11:30:52 -06:00
Paul A. Patience
79023fe026 examples/uavcan: Call up_cxxinitialize 2015-11-12 13:01:03 -05:00
Paul A. Patience
cadb861e7d examples/can: Add missing configuration options 2015-11-10 17:23:19 -05:00
Gregory Nutt
7f0ff3a6db examples/media: Add some more informative output 2015-11-10 13:35:10 -06:00
Gregory Nutt
ae8e89eed0 examples/media: Need to update position before seeking; handle the too-many-error case more gracefully 2015-11-10 11:34:33 -06:00
Gregory Nutt
a584ef09aa examplex/media: Need to seek back to beginning of file on second pass 2015-11-09 13:33:37 -06:00
Gregory Nutt
5fdd68f014 Flesh out examples/media 2015-11-09 13:10:00 -06:00
Gregory Nutt
9ee96d1430 examples/media: Add a simple test of access to media by block and MTD drivers 2015-11-09 11:45:44 -06:00
Gregory Nutt
57050b0f82 Allow the NULL example to be used as an NSH builtin 2015-11-05 14:08:29 -06:00
Paul A. Patience
e795c6eabd apps/examples/adc: Fix Kconfig file 2015-11-01 22:03:24 -05:00
Paul A. Patience
09ba08d6da apps/examples/pwm: Add support for multiple output channels per timer 2015-11-01 17:14:18 -05:00
Alan Carvalho de Assis
825b721dfa apps/examples/zerocross: Add a Zero Cross application example. From Alan Carvalho de Assis 2015-10-13 07:46:42 -06:00
Gregory Nutt
d538f48797 Add dependencies, button and timer example will only work in a flat build 2015-10-12 12:45:43 -06:00
Gregory Nutt
a512e7dc1d Fix a loop indexing problem in all file system tests 2015-10-10 17:15:15 -06:00
Gregory Nutt
b93af2189b Add a generic file system test at apps/examples/fstest 2015-10-10 14:18:23 -06:00
Paul A. Patience
2aeaff042d apps/examples/uavcan: Remove call to boardctl() 2015-10-08 13:42:24 -04:00
Paul A. Patience
f24828337f apps/examples/uavcan: Call boardctl to configure CAN GPIOs 2015-10-07 00:00:39 -04:00
Paul A. Patience
0168398831 UAVCAN: Add more options in Kconfig file 2015-10-06 21:26:30 -04:00
Gregory Nutt
aacfce081e Fix several cosmetic, C coding style issues 2015-10-03 11:03:42 -06:00
Gregory Nutt
f6e7e9c1c0 Standardize the width of all comment boxes in C files 2015-10-03 07:20:15 -06:00
Gregory Nutt
9cb2849742 Standardize the width of all comment boxes in header files 2015-10-02 17:35:18 -06:00
Gregory Nutt
0629c5466e Standardize the width of all comment boxes in C file 2015-10-02 17:33:30 -06:00
Gregory Nutt
e3ad56043e Standardize naming used for public data and function groupings 2015-10-02 16:20:33 -06:00
Gregory Nutt
e9447c6058 Standardize nameing of the pre-processor definitiongs group header 2015-10-02 14:06:11 -06:00
Gregory Nutt
e97a766e90 Make sure that UAVCAN Node ID is in a valid range 2015-10-01 10:16:31 -06:00
Gregory Nutt
e32e6064e0 Update ChangeLog and README 2015-10-01 07:10:25 -06:00
Paul A. Patience
e8ca4c3fde UAVCAN: Add example application 2015-09-30 22:11:46 -04:00
Gregory Nutt
eff5642eca Merged in paulpatience/nuttx-apps (pull request #11) 
UAVCAN: Add platform-specific code
 2015-09-30 16:54:08 -06:00
Paul A. Patience
a7cd308658 UAVCAN: Add platform-specific code 2015-09-30 18:39:37 -04:00
Gregory Nutt
2e0d0ede6d Add apps/exemples/udpblaster 2015-09-30 10:56:31 -06:00
Paul A. Patience
298a72c71e Add UAVCAN library 2015-09-23 13:48:35 -04:00
Paul A. Patience
9eafc90125 Fix issue detected by clang 2015-09-10 21:02:11 -04:00
Gregory Nutt
9ef516c311 Some corrects to previous nxterm commit 2015-09-08 11:53:29 -06:00
Gregory Nutt
f10f2de2e4 Eliminate some warnings 2015-09-08 09:20:49 -06:00
Gregory Nutt
a5d4ed2fef Make sure that CONFIG_USBDEV_TRACE_INITIALIDSET has an assigned value to avoid warnings 2015-09-08 07:24:26 -06:00
Gregory Nutt
5306a27335 apps/examples/ajoystick: Fix missing includes of Application.mk 2015-09-07 16:31:17 -06:00
Alan Carvalho de Assis
aa17ae4c0a Add pap_username/password to pppd example if PAP Auth is enabled 2015-09-07 13:48:37 -06:00
Paul A. Patience
85a2cecb99 Simplify apps/ Makefiles by combining common logic into the Makefile fragment Application.mk 2015-09-05 15:13:03 -04:00