f4d3e549b6
Currently the help messages use "private" string while code expects "random". Remove not needed (CODE void *) cast. Use 'nitems' macro to calculate number of elements in array Align output in `btsak_cmd_scanget` command. Fix style issues Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
4.0 KiB
4.0 KiB
Wireless / Bluetooth / btsak Bluetooth Swiss Army Knife
Commands
Command: help
Description: Should overall command help
Usage: bt <ifname> help
Command: info
Description: Show Bluetooth driver information
Usage: bt <ifname> info [-h]
Command: features
Description: Show Bluetooth driver information
Usage: bt <ifname> features [-h] [le]
Where: le - Selects LE features vs BR/EDR features
Command: scan
Description: Bluetooth scan commands
Usage: bt <ifname> scan [-h] <start [-d]|get|stop>
Where: start - Starts scanning. The -d option enables duplicate
filtering.
get - Shows new accumulated scan results
stop - Stops scanning
Command: advertise
Description: Bluetooth advertise commands
Usage: bt <ifname> advertise [-h] <start|stop>
Where: start - Starts advertising
stop - Stops advertising
Command: security
Description: Enable security (encryption) for a connection:
If device is paired, key encryption will be enabled. If
the link is already encrypted with sufficiently strong
key this command does nothing.
If the device is not paired pairing will be initiated. If
the device is paired and keys are too weak but input output
capabilities allow for strong enough keys pairing will be
initiated.
This command may return error if required level of security
is not possible to achieve due to local or remote device
limitation (eg input output capabilities).
Usage: bt <ifname> security [-h] <addr> public|random <level>
Where: <addr> - The 6-byte address of the connected peer
<level> - Security level, on of:
low - No encryption and no authentication
medium - Encryption and no authentication (no MITM)
high - Encryption and authentication (MITM)
fips - Authenticated LE secure connections and encryption
Command: gatt
Description: Generic Attribute (GATT) commands
Usage: bt <ifname> gatt [-h] <cmd> [option [option [option...]]]
Where: See "GATT Commands" below
GATT Commands
Command: exchange-mtu
Description: Set MTU to out maximum and negotiate MTU with peer
Usage: bt <ifname> gatt exchange-mtu [-h] <addr> public|random
Command: mget
Description: Get the pass/fail result of the last GATT 'exchange-mtu' command
Usage: bt <ifname> gatt mget [-h]
Command: discover
Description: Initiate discovery
Usage: bt <ifname> gatt discover [-h] <addr> public|random <uuid16> [<start> [<end>]]
Command: characteristic
Description: Initiate characteristics discovery
Usage: bt <ifname> gatt characteristic [-h] <addr> public|random [<start> [<end>]]
Command: descriptor
Description: Initiate characteristics discovery
Usage: bt <ifname> gatt descriptor [-h] <addr> public|random [<start> [<end>]]
Command: dget
Description: Get the result of the last discovery action
Usage: bt <ifname> gatt dget [-h]
Command: read
Description: Initiate a GATT read operation.
Usage: bt <ifname> gatt read [-h] <addr> public|random <handle> [<offset>]
Command: read-multiple
Description: Initiate a GATT read-multiple operation.
Usage: bt <ifname> gatt read-multiple [-h] <addr> public|random <handle> [<handle> [<handle>]..]
Command: rget
Description: Get the data resulting from the last read operation
Usage: bt <ifname> gatt rget [-h]
Command: write
Description: Initiate a GATT write operation.
Usage: bt <ifname> gatt write [-h] <addr> public|random <handle> <byte> [<byte> [<byte>]..]
Command: wget
Description: Get the pass/fail result of the last GATT 'write' command
Usage: bt <ifname> gatt wget [-h]