sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
01eec62598
nuttx/configs/imxrt1050-evk/netnsh/defconfig

61 lines
1.4 KiB
Plaintext
Raw Normal View History

This commit adds an i.MX RT Ethernet drivers. Squashed commit of the following: Author: Gregory Nutt <gnutt@nuttx.org> arch/arm/src/imxrt: Add cache operations to permit the Ethernet driver to work with the D-Cache enabled, at least in write-through mode. Author: Jake Choy <jakearcx@gmail.com> arch/arm/src/imxrt: The Ethernet driver is now functional, at least with the D-Cache off. The final fix was for the reference clock that needs to be forced to provide and input (SION). Author: Gregory Nutt <gnutt@nuttx.org> Fix trivial coding standard issue. configs/imxrt1050-evk: Correct CONFIG_RAM_SIZE in all configurations (5Kb not 5Mb). I don't believe that CONFIG_RAM_SIZE is used at all in the i.MX RT so this is as grievous an error as it seems. Also enabled built-in applications in all NSH configurations. arch/arm/src/imxrt/imxrt_enet.c: Trivial and cosmetic. Cosmetic update to comments. arch/arm/src/imxrt/imxrt_enet.c: Oops.. put the PHY interrupt init hooks in the wrong place. That is a one-time initialization but imxrt_initphy() is called on each ifup. arch/arm/src/imxrt/imxrt_enet.c: Add hooks for board-specific PHY initialization (not yet needed, but there when needed). Remove dangling white space at the end of lines arch/arm/src/imxrt/Kconfig: Add option for board-specific PHY initialization. configs/imxrt1050-evk/src: Add basic logic to support PHY interrupts. Incomplete.. needs additional support in imxrt_enet.c to 1. call to initialize PHY interrupt features, and 2. IOCTL commands to access PHY registers. configs/imxrt1050-evk/README.txt: Trivial update. configs/imxrt1050-evk/netnsh/defconfig: Disable LED support because pins conflict with PHY. Enable device statists. Enable NSH ifup and ifdown commmands arch/arm/src/imxrt: Use macros in imxrt_periphclks.h vs. direct CCM CCGR accesses in Ethernet driver. arch/arm/src/imxrt: Misc changes for a clean compilation of Ethernet deriver. configs/imxrt1050-evk/netnsh: Add an NSH configuration for testing Ethernet. Author: Jake Choy <jakearcx@gmail.com> arch/arm/src/imxrt: Initial WIP Ethernet driver.
2018-05-25 17:36:23 +02:00
# CONFIG_ARCH_LEDS is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD="imxrt1050-evk"
CONFIG_ARCH_BOARD_IMXRT1050_EVK=y
CONFIG_ARCH_CHIP_IMXRT=y
CONFIG_ARCH_CHIP_MIMXRT1052DVL6A=y
CONFIG_ARCH_STACKDUMP=y
CONFIG_ARMV7M_DCACHE=y
CONFIG_ARMV7M_DCACHE_WRITETHROUGH=y
CONFIG_ARMV7M_ICACHE=y
CONFIG_ARMV7M_USEBASEPRI=y
CONFIG_BOARD_LOOPSPERMSEC=104926
CONFIG_BUILTIN=y
CONFIG_ETH0_PHY_KSZ8081=y
CONFIG_EXAMPLES_NSH=y
CONFIG_FS_PROCFS=y
CONFIG_IDLETHREAD_STACKSIZE=2048
CONFIG_IMXRT_ENET=y
CONFIG_IMXRT_LPUART1=y
CONFIG_INTELHEX_BINARY=y
CONFIG_LPUART1_SERIAL_CONSOLE=y
CONFIG_MAX_TASKS=16
CONFIG_MAX_WDOGPARMS=2
CONFIG_NET=y
CONFIG_NETDEV_STATISTICS=y
CONFIG_NETUTILS_TELNETD=y
CONFIG_NET_ARP_SEND=y
CONFIG_NET_BROADCAST=y
CONFIG_NET_HOSTNAME="i.MXRT1050 EVK"
CONFIG_NET_ICMP=y
CONFIG_NET_ICMP_SOCKET=y
CONFIG_NET_ICMPv6=y
CONFIG_NET_ICMPv6_NEIGHBOR=y
CONFIG_NET_ICMPv6_SOCKET=y
CONFIG_NET_IPv6=y
CONFIG_NET_SOCKOPTS=y
CONFIG_NET_STATISTICS=y
CONFIG_NET_TCP=y
CONFIG_NET_TCPBACKLOG=y
CONFIG_NET_TCP_WRITE_BUFFERS=y
CONFIG_NET_UDP=y
CONFIG_NET_UDP_WRITE_BUFFERS=y
CONFIG_NFILE_DESCRIPTORS=8
CONFIG_NFILE_STREAMS=8
CONFIG_NSH_ARCHINIT=y
CONFIG_NSH_BUILTIN_APPS=y
CONFIG_NSH_FILEIOSIZE=512
CONFIG_NSH_LINELEN=64
CONFIG_NSH_NOMAC=y
CONFIG_NSH_READLINE=y
CONFIG_PREALLOC_MQ_MSGS=4
CONFIG_PREALLOC_WDOGS=16
CONFIG_RAM_SIZE=524288
CONFIG_RAM_START=0x20200000
CONFIG_SCHED_LPWORK=y
CONFIG_START_DAY=14
CONFIG_START_MONTH=3
CONFIG_SYSTEM_PING6=y
CONFIG_SYSTEM_PING=y
CONFIG_USER_ENTRYPOINT="nsh_main"
Reference in New Issue Copy Permalink