nuttx/net/sixlowpan/sixlowpan_udpsend.c

486 lines
14 KiB
C
Raw Normal View History

2017-03-30 02:07:52 +02:00
/****************************************************************************
* net/sixlowpan/sixlowpan_udpsend.c
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
2017-03-30 02:07:52 +02:00
*
* http://www.apache.org/licenses/LICENSE-2.0
2017-03-30 02:07:52 +02:00
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
2017-03-30 02:07:52 +02:00
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
2017-04-02 19:15:46 +02:00
#include <sys/socket.h>
#include <string.h>
2017-03-30 02:07:52 +02:00
#include <assert.h>
#include <errno.h>
#include <debug.h>
#include "nuttx/net/netdev.h"
#include "nuttx/net/radiodev.h"
#include "nuttx/net/netstats.h"
2017-03-30 02:07:52 +02:00
#include "netdev/netdev.h"
#include "socket/socket.h"
#include "inet/inet.h"
#include "icmpv6/icmpv6.h"
2017-03-30 02:07:52 +02:00
#include "udp/udp.h"
#include "utils/utils.h"
2017-03-30 02:07:52 +02:00
#include "sixlowpan/sixlowpan_internal.h"
#if defined(CONFIG_NET_6LOWPAN) && defined(CONFIG_NET_UDP)
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Name: sixlowpan_udp_chksum
*
* Description:
* Perform the checksum calculation over the IPv6, protocol headers, and
* data payload as necessary.
*
* Input Parameters:
* ipv6udp - A reference to a structure containing the IPv6 and UDP
* headers.
* buf - The beginning of the payload data
* buflen - The length of the payload data.
*
* Returned Value:
* The calculated checksum
*
****************************************************************************/
#ifdef CONFIG_NET_UDP_CHECKSUMS
static uint16_t sixlowpan_udp_chksum(FAR const struct ipv6udp_hdr_s *ipv6udp,
FAR const uint8_t *buf, uint16_t buflen)
{
uint16_t upperlen;
uint16_t sum;
/* The length reported in the IPv6 header is the length of the payload
* that follows the header.
*/
upperlen = ((uint16_t)ipv6udp->ipv6.len[0] << 8) + ipv6udp->ipv6.len[1];
/* Verify some minimal assumptions */
This commit attempts remove some long standard confusion in naming and some actual problems that result from the naming confusion. The basic problem is the standard MTU does not include the size of the Ethernet header. For clarity, I changed the naming of most things called MTU to PKTSIZE. For example, CONFIG_NET_ETH_MTU is now CONFIG_NET_ETH_PKTSIZE. This makes the user interface a little hostile. People thing of an MTU of 1500 bytes, but the corresponding packet is really 1514 bytes (including the 14 byte Ethernet header). A more friendly solution would configure the MTU (as before), but then derive the packet buffer size by adding the MAC header length. Instead, we define the packet buffer size then derive the MTU. The MTU is not common currency in networking. On the wire, the only real issue is the MSS which is derived from MTU by subtracting the IP header and TCP header sizes (for the case of TCP). Now it is derived for the PKTSIZE by subtracting the IP header, the TCP header, and the MAC header sizes. So we should be all good and without the recurring 14 byte error in MTU's and MSS's. Squashed commit of the following: Trivial update to fix some spacing issues. net/: Rename several macros containing _MTU to _PKTSIZE. net/: Rename CONFIG_NET_SLIP_MTU to CONFIG_NET_SLIP_PKTSIZE and similarly for CONFIG_NET_TUN_MTU. These are not the MTU which does not include the size of the link layer header. These are the full size of the packet buffer memory (minus any GUARD bytes). net/: Rename CONFIG_NET_6LOWPAN_MTU to CONFIG_NET_6LOWPAN_PKTSIZE and similarly for CONFIG_NET_TUN_MTU. These are not the MTU which does not include the size of the link layer header. These are the full size of the packet buffer memory (minus any GUARD bytes). net/: Rename CONFIG_NET_ETH_MTU to CONFIG_NET_ETH_PKTSIZE. This is not the MTU which does not include the size of the link layer header. This is the full size of the packet buffer memory (minus any GUARD bytes). net/: Rename the file d_mtu in the network driver structure to d_pktsize. That value saved there is not the MTU. The packetsize is the memory large enough to hold the maximum packet PLUS the size of the link layer header. The MTU does not include the link layer header.
2018-07-04 22:10:40 +02:00
if (upperlen > CONFIG_NET_6LOWPAN_PKTSIZE)
{
return 0;
}
/* The checksum is calculated starting with a pseudo-header of IPv6 header
* fields according to the IPv6 standard, which consists of the source
* and destination addresses, the packet length and the next header field.
*/
sum = upperlen + ipv6udp->ipv6.proto;
/* Sum IP source and destination addresses. */
sum = chksum(sum, (FAR uint8_t *)ipv6udp->ipv6.srcipaddr,
2 * sizeof(net_ipv6addr_t));
/* Sum the UDP header */
sum = chksum(sum, (FAR uint8_t *)&ipv6udp->udp, UDP_HDRLEN);
/* Sum payload data. */
sum = chksum(sum, buf, buflen);
return (sum == 0) ? 0xffff : HTONS(sum);
}
#endif
2017-03-30 02:07:52 +02:00
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: psock_6lowpan_udp_sendto
2017-03-30 02:07:52 +02:00
*
* Description:
2017-04-02 19:15:46 +02:00
* If sendto() is used on a connection-mode (SOCK_STREAM, SOCK_SEQPACKET)
* socket, the parameters to and 'tolen' are ignored (and the error EISCONN
* may be returned when they are not NULL and 0), and the error ENOTCONN is
* returned when the socket was not actually connected.
2017-03-30 02:07:52 +02:00
*
* Input Parameters:
2017-04-02 19:15:46 +02:00
* psock A pointer to a NuttX-specific, internal socket structure
* buf Data to send
* buflen Length of data to send
2017-04-02 19:15:46 +02:00
* flags Send flags
* to Address of recipient
* tolen The length of the address structure
2017-03-30 02:07:52 +02:00
*
* Returned Value:
* On success, returns the number of characters sent. On error,
2017-04-02 19:15:46 +02:00
* -1 is returned, and errno is set appropriately. Returned error
* number must be consistent with definition of errors reported by
2017-03-30 02:07:52 +02:00
* sendto().
*
* Assumptions:
* Called with the network locked.
*
****************************************************************************/
2017-04-02 19:15:46 +02:00
ssize_t psock_6lowpan_udp_sendto(FAR struct socket *psock,
FAR const void *buf,
size_t buflen, int flags,
2017-04-02 19:15:46 +02:00
FAR const struct sockaddr *to,
socklen_t tolen)
2017-03-30 02:07:52 +02:00
{
2017-04-02 19:15:46 +02:00
FAR struct sockaddr_in6 *to6 = (FAR struct sockaddr_in6 *)to;
2017-03-30 02:07:52 +02:00
FAR struct udp_conn_s *conn;
FAR struct net_driver_s *dev;
struct ipv6udp_hdr_s ipv6udp;
Squashed commit of the following: commit f97da3a546f9d6e1b858cfc45538a06b62396034 Author: Gregory Nutt <gnutt@nuttx.org> Date: Sun Jul 30 19:09:46 2017 -0600 Network: Condition out some types that depend on definitions that are only available with 6LoWPAN is enabled. commit 312e9dc1195527100e12bf6be8b629f5b29be1f6 Author: Gregory Nutt <gnutt@nuttx.org> Date: Sun Jul 30 18:57:23 2017 -0600 6LoWPAN: Fix case where source and destination IP address were backward. Fix some compile issues when star topology support is enabled. commit 3b0e71c5807194fbb006d0560bb2c98133055ba3 Author: Gregory Nutt <gnutt@nuttx.org> Date: Sun Jul 30 16:01:48 2017 -0600 6LoWPAN PktRadio: Finishes up all logic; Lots of misc changes from build testing. commit cc118f8cb335e1c48354fd7112e20be57de50b68 Author: Gregory Nutt <gnutt@nuttx.org> Date: Sun Jul 30 12:41:18 2017 -0600 6LoWPAN: Remove explicate type struct ieee802154_frame_meta_s from derive interface methods. Replace with a opaque void * type so that other radio meta data structures may use the interfaces. Add a new radion interface to get properties of the radio. Spirit: Finish packet I/O interface with the network. commit 1aa0a63e8341ca5f9f88c294f96d1740459146d4 Author: Gregory Nutt <gnutt@nuttx.org> Date: Sun Jul 30 07:57:15 2017 -0600 6LoWPAN: Replace metadata input parameter type from struct ieee802154_data_ind_s to void*. This permits radios with different MAC metadata to interact with 6LoWPAN. Includes many changes to handle variable length radio addresses. No longer just short and exteneded; any length. commit 46266ace61ae6246123873935436d864c7de31e0 Author: Gregory Nutt <gnutt@nuttx.org> Date: Sat Jul 29 17:50:42 2017 -0600 Spirit: Fix typos in SPI debug code. commit 27c6b235f6a2d3b2f08da4920b224a40e9991f59 Merge: 7029dffd02 7f53e08917 Author: Gregory Nutt <gnutt@nuttx.org> Date: Sat Jul 29 13:43:02 2017 -0600 Merge remote-tracking branch 'origin/master' into spirit commit 7029dffd02156bcbfa84262671c2ca766a117191 Author: Gregory Nutt <gnutt@nuttx.org> Date: Sat Jul 29 12:02:13 2017 -0600 6LoWPAN PktRadio: Add missing MetaData-related prototypes and initialization logic. Perform a major renaming to make room in the 6LoWPAN name space for packet radios. commit e2012f7c1df14155c0bfd45d7f1cb3f71b259f48 Author: Gregory Nutt <gnutt@nuttx.org> Date: Sat Jul 29 10:16:23 2017 -0600 6LoWPAN PktRadio: Some initial changes to support raw packet radios without IEEE 802.15.4 with 6LoWPAN. commit c6dbf9178539b7da75e492ffd1d1f93c9c326299 Merge: da782d6cdf 5889ce65f5 Author: Gregory Nutt <gnutt@nuttx.org> Date: Sat Jul 29 07:30:08 2017 -0600 Merge remote-tracking branch 'origin/master' into spirit commit da782d6cdff5980d71aaa2da5f9c28ab3438d085 Author: Gregory Nutt <gnutt@nuttx.org> Date: Sat Jul 29 07:26:48 2017 -0600 Spirit: Completes port of the spirit radio library to NuttX. commit 63f3595c47dca13952d28b518c7f0a8d6ae9037a Author: Gregory Nutt <gnutt@nuttx.org> Date: Fri Jul 28 17:42:51 2017 -0600 Spirit: Bring in a couple ore more radio interface functions. commit 692a27da396b7683749790923d8fa085091764f1 Merge: 27c0a6ec08 38f79543dc Author: Gregory Nutt <gnutt@nuttx.org> Date: Fri Jul 28 15:49:37 2017 -0600 Merge remote-tracking branch 'origin/master' into spirit commit 27c0a6ec0813187f125922c81189a70cf04d83d4 Author: Gregory Nutt <gnutt@nuttx.org> Date: Fri Jul 28 15:47:27 2017 -0600 Spirit: Bring in a couple ore more radio interface functions. commit 96657af2831487724723a60084831619257fd953 Author: Gregory Nutt <gnutt@nuttx.org> Date: Fri Jul 28 14:20:14 2017 -0600 Spirit: Bring in more radio interface functions. commit 640d55399b54a019be68825668fca1446abd082f Merge: 3fcf84a9a2 47791442a0 Author: Gregory Nutt <gnutt@nuttx.org> Date: Fri Jul 28 12:01:43 2017 -0600 Merge remote-tracking branch 'origin/master' into spirit commit 3fcf84a9a2673e1e1466ce5b114d7b73c257e515 Author: Gregory Nutt <gnutt@nuttx.org> Date: Fri Jul 28 12:00:31 2017 -0600 Spirit: Brings in the last of the PktCommon interfaces. commit d26ebd901ba4ba84910e99b4e728b98c30fa4c0b Author: Gregory Nutt <gnutt@nuttx.org> Date: Fri Jul 28 09:54:52 2017 -0600 Spirit: Add a few more PktCommon interfaces. commit b5cb8041d50233a4abb8fb4d1dcef5428ae2c2b2 Author: Gregory Nutt <gnutt@nuttx.org> Date: Fri Jul 28 09:33:31 2017 -0600 libc/termios: Remember block comments before empty file sections. commit 0fcab2c1c8c74442d40bd5e8c6af50a34f8a5821 Author: Sebastien Lorquet <sebastien@lorquet.fr> Date: Fri Jul 28 09:31:00 2017 -0600 tcdrain implementation based on a new term ioctl commit 797d4adf7d41068c671f0217d369b797b269de1a Author: Stefan Kolb <Stefan.Kolb@avat.de> Date: Fri Jul 28 09:19:04 2017 -0600 We discovered a problem with the samv7 mcan driver which results, under some circumstances, in a very high CPU load. The problem occurs, and is easily reproducible, if the device is connected to a CAN network with a wrongly configured CAN speed (baud rate). In our tests we set the CAN speed of the device to 1000000 and the speed of the other CAN nodes to 500000. The device is restarted and sends a CANopen “bootup message” to the CAN network. This results in huge amount of errors messages on the CAN bus, probably because of the CAN feature for acknowledging error messages. The error messages can’t be read by the device because of the misconfigured CAN speed, instead the CAN chip reports lots of errors, which are reported to the application which uses the CAN driver (CONFIG_CAN_ERRORS is enabled). The CAN errors are reported from the CAN chip via interrupts and thus the interrupt load is very high in this scenario. To fix the problem the driver now disables each RX error interrupt after it is occurred. The RX error interrupts are turned back on if at least one CAN message is received successfully. commit e298f48e96d9e34017dcab8e4d87032862ae9322 Author: Gregory Nutt <gnutt@nuttx.org> Date: Fri Jul 28 09:06:26 2017 -0600 Spirit: Bring in PktStack interfaces. commit 4a0f00a7058312dcf6ac392689b9f69112f613ec Merge: 855cf97130 b458934ac4 Author: Gregory Nutt <gnutt@nuttx.org> Date: Thu Jul 27 18:05:02 2017 -0600 Merge remote-tracking branch 'origin/master' into spirit commit 855cf9713052a851a1daeb3842db2edd6ff6f658 Author: Gregory Nutt <gnutt@nuttx.org> Date: Thu Jul 27 18:03:56 2017 -0600 Spirit Network Driver: Add some hooks that will eventually support address filtering. commit 3b3fb24ea86cf8233b034871d5c550f47ab852e6 Author: Gregory Nutt <gnutt@nuttx.org> Date: Thu Jul 27 17:13:21 2017 -0600 Spirit: Add a PktStack header file. commit 705e8fff6a21264ab751fb34c107cb109430ac89 Author: Gregory Nutt <gnutt@nuttx.org> Date: Thu Jul 27 15:00:03 2017 -0600 Spirit: Bring in last of timer interfaces. commit f8984b2f82e165f5bba132d6b099222d1beb1fbd Merge: cb79778a30 f287cc25d6 Author: Gregory Nutt <gnutt@nuttx.org> Date: Thu Jul 27 11:57:01 2017 -0600 Merge remote-tracking branch 'origin/master' into spirit commit cb79778a3044ae97a1cc615dfa24099144f04bd0 Author: Gregory Nutt <gnutt@nuttx.org> Date: Thu Jul 27 11:46:31 2017 -0600 Spirit: Bring in last of QI interfaces. commit 0245b330a33aa73531b82ae261b1312be9922e0f Author: Gregory Nutt <gnutt@nuttx.org> Date: Thu Jul 27 10:14:34 2017 -0600 Spirit: Add general interfaces. commit 121845a8f229ec2c88e5721da5512135f6624ee5 Author: Gregory Nutt <gnutt@nuttx.org> Date: Thu Jul 27 09:41:23 2017 -0600 Spirit: Bring in last of GPIO interfaces. commit 279bfcc92bcd0cfa48c0ed7862fa2b75fbee99b8 Author: Gregory Nutt <gnutt@nuttx.org> Date: Wed Jul 26 17:09:19 2017 -0600 Spirit: Add some missing configuration options: Add register -level debug options. commit 4be89324a5908e35afc70373c279f4d05f62b48f Merge: 66e87f9bb3 598386ef90 Author: Gregory Nutt <gnutt@nuttx.org> Date: Wed Jul 26 15:36:20 2017 -0600 Merge remote-tracking branch 'origin/master' into spirit commit 66e87f9bb3ef75fddf25400bc08475c5e6ad4c30 Author: Gregory Nutt <gnutt@nuttx.org> Date: Wed Jul 26 15:19:56 2017 -0600 Spirit: Brings in last of PktBasic logic. commit 8b4c89d6a103003fa04363e2c2ae7b9ee390bf49 Author: Gregory Nutt <gnutt@nuttx.org> Date: Wed Jul 26 11:55:50 2017 -0600 Spirit: Bring in AES and MBUS logic. commit d00022d39ab0ce839de29386949481e5c24feff3 Author: Gregory Nutt <gnutt@nuttx.org> Date: Wed Jul 26 09:22:03 2017 -0600 Spirit: Bring in remainder of calibration interfaces. commit 40b4b2f902e04293f8940551a97a9a24a48988dd Author: Gregory Nutt <gnutt@nuttx.org> Date: Wed Jul 26 08:44:32 2017 -0600 Spirit: Bring in DirectRF interfaces. commit 7c109608e1a2989f3edbc2fd939a2d225fff382a Author: Gregory Nutt <gnutt@nuttx.org> Date: Wed Jul 26 07:46:19 2017 -0600 Spirit: Add CSMA support. commit 0f88896595d162c4ac6138e7b1af2fc35c865b3d Author: Gregory Nutt <gnutt@nuttx.org> Date: Tue Jul 25 18:57:43 2017 -0600 Spirit: Add some initial TX logic to network driver. commit 4dc7058dfcdcf40980578680b7e1a4206dea4ea2 Author: Gregory Nutt <gnutt@nuttx.org> Date: Tue Jul 25 17:02:11 2017 -0600 Spirit: Completes ports of spirit_management.* files commit c904eef51d929e041b87d0c8aff6fa3c2f895341 Merge: 91e985a877 c9ff8cbab9 Author: Gregory Nutt <gnutt@nuttx.org> Date: Tue Jul 25 15:15:04 2017 -0600 Merge remote-tracking branch 'origin/master' into spirit commit 91e985a87729017a66d19276c4d47681064f95ea Author: Gregory Nutt <gnutt@nuttx.org> Date: Tue Jul 25 15:13:54 2017 -0600 Spirit: Add a few more functions that will soon be needed for packet transmission. commit b5981d29983907c2194fbc26af4b72ad532bee78 Author: Gregory Nutt <gnutt@nuttx.org> Date: Tue Jul 25 13:30:07 2017 -0600 Spirit: Finish off some initialization issues; Started some interrupt handling logic. commit c21073e0bc2870b3d9ba40bdfdfd5151ce4f5890 Author: Gregory Nutt <gnutt@nuttx.org> Date: Tue Jul 25 09:35:52 2017 -0600 Spirit: Completes very basic radio initialization for network driver commit 1b544334361c54f46bcf0ba313c125932e8dafc6 Author: Gregory Nutt <gnutt@nuttx.org> Date: Tue Jul 25 07:58:30 2017 -0600 Spirit: Add more radio initialization logic... getting closer. commit 45d1047db60843c57d394ec910c63e7c127671e0 Author: Gregory Nutt <gnutt@nuttx.org> Date: Mon Jul 24 19:15:33 2017 -0600 Spirit: add some CSMA initialization logic commit bcf55c71336d48947fe19bb09a799169852301c2 Merge: 89e9d426e9 2fc0fbcf7e Author: Gregory Nutt <gnutt@nuttx.org> Date: Mon Jul 24 16:47:11 2017 -0600 Merge remote-tracking branch 'origin/master' into spirit commit 89e9d426e91c056e659fccf5e5c4392618f8f777 Author: Gregory Nutt <gnutt@nuttx.org> Date: Mon Jul 24 16:44:19 2017 -0600 Update some comments commit 9c5d8a5833350006ed389e898b11c8c8a20e5f4f Author: Gregory Nutt <gnutt@nuttx.org> Date: Mon Jul 24 16:15:54 2017 -0600 Spirit: Rename drivers/wireless/spirit/src to lib. Move Spirit network driver out of IEEE802.15.4 into drivers/wireless/spirit/drivers commit cabc0ec9e6eb558dcb715ab17264383aa0105e7a Merge: 87b616414a 6bd744c4b3 Author: Gregory Nutt <gnutt@nuttx.org> Date: Mon Jul 24 15:38:40 2017 -0600 Merge remote-tracking branch 'origin/master' into spirit commit 87b616414a79c01a71acea78f8258e05325c1996 Author: Gregory Nutt <gnutt@nuttx.org> Date: Mon Jul 24 15:37:27 2017 -0600 Spirit radio driver is mutating into a standalone network driver. commit 507798233868a661ae8adad3e3aa117075a7a146 Author: Gregory Nutt <gnutt@nuttx.org> Date: Mon Jul 24 13:32:08 2017 -0600 Spirit: More radio initialization logic commit 33af25704ce9ca83d576300d153cfe31cc6d2576 Author: Gregory Nutt <gnutt@nuttx.org> Date: Mon Jul 24 12:19:14 2017 -0600 Spirit: Beginning of radio initialization logic commit 97b20014c016e55952a8f9d8f4ae29e2cc555b23 Author: Gregory Nutt <gnutt@nuttx.org> Date: Mon Jul 24 09:42:06 2017 -0600 Spirit: More initialization logic. commit 295d8e27824c0417fccea2344b30bb5c93ffbabe Author: Gregory Nutt <gnutt@nuttx.org> Date: Sun Jul 23 15:39:53 2017 -0600 Spirit: Add header file containing enumeration of commands. commit 8a2d9dd8eb9cc70cbcdd1b913fc9022b9c9ec8da Author: Gregory Nutt <gnutt@nuttx.org> Date: Sun Jul 23 11:33:50 2017 -0600 Spirit: Add GPIO initialization logic commit 8b6d80c44f92024c45a6ba63ba1af3fdafe94dc3 Author: Gregory Nutt <gnutt@nuttx.org> Date: Sun Jul 23 10:07:25 2017 -0600 Spirit: Add interrupt control logic. commit 423f846fe5c914f92a4bfea4d9d1fa33de1c77a5 Author: Gregory Nutt <gnutt@nuttx.org> Date: Sat Jul 22 19:06:52 2017 -0600 Spirit: Yet a little more radio initialization logic. commit 5895b979823e51ddde5ad52e6de66a8ad662e883 Author: Gregory Nutt <gnutt@nuttx.org> Date: Sat Jul 22 15:36:05 2017 -0600 Spirit: A little more radio initialization logic. commit 86311ab30aad386203c181c792847dd1d37f9a02 Author: Gregory Nutt <gnutt@nuttx.org> Date: Sat Jul 22 13:02:32 2017 -0600 Spirit: A miniscule amount of radio initialization logic. commit ad55e89d5ee12ea1eeea95fcd38ff3da0db4416a Merge: 90a7666655 f4e46b0da7 Author: Gregory Nutt <gnutt@nuttx.org> Date: Sat Jul 22 10:56:30 2017 -0600 Merge remote-tracking branch 'origin/master' into spirit commit 90a766665534b05da0157dbc383cb06a98c86a79 Author: Gregory Nutt <gnutt@nuttx.org> Date: Sat Jul 22 10:52:52 2017 -0600 Spirit1: A few fixes for a clean build of initial configuration (not much there yet) commit bbbf04c223230a52a7705a2161128265cfbaa480 Merge: 623d54a7f7 2319ea53a9 Author: Gregory Nutt <gnutt@nuttx.org> Date: Sat Jul 22 09:53:57 2017 -0600 Merge remote-tracking branch 'origin/master' into spirit commit 623d54a7f719e9032099f88f38203efee4b80722 Author: Gregory Nutt <gnutt@nuttx.org> Date: Sat Jul 22 09:43:52 2017 -0600 b-l475e-iot01a: Add a configuration for testing sprit radio. commit d309d73d9f4665f9d870eb03531f450043d9389d Merge: 52c3ddfae6 d88dc9b2e5 Author: Gregory Nutt <gnutt@nuttx.org> Date: Sat Jul 22 09:02:06 2017 -0600 Merge remote-tracking branch 'origin/master' into spirit commit 52c3ddfae6802e111c2b5cf1207baf21a61dd00b Author: Gregory Nutt <gnutt@nuttx.org> Date: Sat Jul 22 08:33:04 2017 -0600 Spirit: Add register definition header file. commit 8d842ab5e8f9ca653b42f9ee88dc279f06b4fa98 Author: Gregory Nutt <gnutt@nuttx.org> Date: Fri Jul 21 17:27:03 2017 -0600 b-l475e-iot01a: Add initial, unverified support for the SPSRGF/Spirit1 module. commit 73d902a1048616fb9c2dd2147cabcd8ee78e19ac Author: Gregory Nutt <gnutt@nuttx.org> Date: Fri Jul 21 15:49:43 2017 -0600 Spirit: Fixes to get skeleton IEEE 802.15.4 driver build. commit ebc5a8387bb94f0cc3827533795f3e4a33207e67 Author: Gregory Nutt <gnutt@nuttx.org> Date: Fri Jul 21 15:16:29 2017 -0600 Spirit1: Add framework for IEEE 802.15.4 driver. Does not yet build. commit 52e195a7ae14ddb18bdd56258f4877381d2501ca Author: Gregory Nutt <gnutt@nuttx.org> Date: Fri Jul 21 14:02:42 2017 -0600 Spirit: A little more SPI logic. commit 90048d0c5b8a5af4d81a15d99535c84ed38d8ae9 Author: Gregory Nutt <gnutt@nuttx.org> Date: Fri Jul 21 11:19:06 2017 -0600 Spirit: Build directories setup. Some initial files added, mostly just to verify build. commit 8273a381ac1f6bb081b292b5e73226185e9e634c Author: Gregory Nutt <gnutt@nuttx.org> Date: Fri Jul 21 08:34:04 2017 -0600 USB composite: Remove references to CDC/ACM and USB MSC from composite logic. They are no longer coupled.
2017-07-31 03:10:51 +02:00
struct netdev_varaddr_s destmac;
uint16_t iplen;
2017-03-30 02:07:52 +02:00
int ret;
ninfo("buflen %lu\n", (unsigned long)buflen);
DEBUGASSERT(to != NULL);
2017-03-30 02:07:52 +02:00
DEBUGASSERT(psock->s_type == SOCK_DGRAM);
sixlowpan_dumpbuffer("Outgoing UDP payload", buf, buflen);
2017-04-02 19:15:46 +02:00
if (psock == NULL || to == NULL)
{
return (ssize_t)-EINVAL;
}
2017-03-30 02:07:52 +02:00
2017-04-02 19:15:46 +02:00
/* Make sure that this is a datagram valid socket */
if (psock->s_conn == NULL || psock->s_type != SOCK_DGRAM)
2017-03-30 02:07:52 +02:00
{
nerr("ERROR: Invalid socket\n");
return (ssize_t)-EBADF;
}
2017-04-02 19:15:46 +02:00
/* Make sure that the destination address is valid */
2017-03-30 02:07:52 +02:00
2017-04-02 19:15:46 +02:00
if (to6->sin6_family != AF_INET6 || tolen < sizeof(struct sockaddr_in6))
2017-03-30 02:07:52 +02:00
{
nerr("ERROR: Invalid destination address: sin6_family=%u tolen = %u\n",
to6->sin6_family, tolen);
return (ssize_t)-EPROTOTYPE;
2017-03-30 02:07:52 +02:00
}
/* Get the underlying UDP "connection" structure */
conn = psock->s_conn;
2017-03-30 02:07:52 +02:00
DEBUGASSERT(conn != NULL);
/* Route outgoing message to the correct device */
dev = netdev_findby_ripv6addr(conn->u.ipv6.laddr,
to6->sin6_addr.in6_u.u6_addr16);
if (dev == NULL)
2017-03-30 02:07:52 +02:00
{
Squashed commit of the following: commit 7029dffd02156bcbfa84262671c2ca766a117191 Author: Gregory Nutt <gnutt@nuttx.org> Date: Sat Jul 29 12:02:13 2017 -0600 6LoWPAN PktRadio: Add missing MetaData-related prototypes and initialization logic. Perform a major renaming to make room in the 6LoWPAN name space for packet radios. commit e2012f7c1df14155c0bfd45d7f1cb3f71b259f48 Author: Gregory Nutt <gnutt@nuttx.org> Date: Sat Jul 29 10:16:23 2017 -0600 6LoWPAN PktRadio: Some initial changes to support raw packet radios without IEEE 802.15.4 with 6LoWPAN. commit c6dbf9178539b7da75e492ffd1d1f93c9c326299 Merge: da782d6cdf 5889ce65f5 Author: Gregory Nutt <gnutt@nuttx.org> Date: Sat Jul 29 07:30:08 2017 -0600 Merge remote-tracking branch 'origin/master' into spirit commit da782d6cdff5980d71aaa2da5f9c28ab3438d085 Author: Gregory Nutt <gnutt@nuttx.org> Date: Sat Jul 29 07:26:48 2017 -0600 Spirit: Completes port of the spirit radio library to NuttX. commit 63f3595c47dca13952d28b518c7f0a8d6ae9037a Author: Gregory Nutt <gnutt@nuttx.org> Date: Fri Jul 28 17:42:51 2017 -0600 Spirit: Bring in a couple ore more radio interface functions. commit 692a27da396b7683749790923d8fa085091764f1 Merge: 27c0a6ec08 38f79543dc Author: Gregory Nutt <gnutt@nuttx.org> Date: Fri Jul 28 15:49:37 2017 -0600 Merge remote-tracking branch 'origin/master' into spirit commit 27c0a6ec0813187f125922c81189a70cf04d83d4 Author: Gregory Nutt <gnutt@nuttx.org> Date: Fri Jul 28 15:47:27 2017 -0600 Spirit: Bring in a couple ore more radio interface functions. commit 96657af2831487724723a60084831619257fd953 Author: Gregory Nutt <gnutt@nuttx.org> Date: Fri Jul 28 14:20:14 2017 -0600 Spirit: Bring in more radio interface functions. commit 640d55399b54a019be68825668fca1446abd082f Merge: 3fcf84a9a2 47791442a0 Author: Gregory Nutt <gnutt@nuttx.org> Date: Fri Jul 28 12:01:43 2017 -0600 Merge remote-tracking branch 'origin/master' into spirit commit 3fcf84a9a2673e1e1466ce5b114d7b73c257e515 Author: Gregory Nutt <gnutt@nuttx.org> Date: Fri Jul 28 12:00:31 2017 -0600 Spirit: Brings in the last of the PktCommon interfaces. commit d26ebd901ba4ba84910e99b4e728b98c30fa4c0b Author: Gregory Nutt <gnutt@nuttx.org> Date: Fri Jul 28 09:54:52 2017 -0600 Spirit: Add a few more PktCommon interfaces. commit b5cb8041d50233a4abb8fb4d1dcef5428ae2c2b2 Author: Gregory Nutt <gnutt@nuttx.org> Date: Fri Jul 28 09:33:31 2017 -0600 libc/termios: Remember block comments before empty file sections. commit 0fcab2c1c8c74442d40bd5e8c6af50a34f8a5821 Author: Sebastien Lorquet <sebastien@lorquet.fr> Date: Fri Jul 28 09:31:00 2017 -0600 tcdrain implementation based on a new term ioctl commit 797d4adf7d41068c671f0217d369b797b269de1a Author: Stefan Kolb <Stefan.Kolb@avat.de> Date: Fri Jul 28 09:19:04 2017 -0600 We discovered a problem with the samv7 mcan driver which results, under some circumstances, in a very high CPU load. The problem occurs, and is easily reproducible, if the device is connected to a CAN network with a wrongly configured CAN speed (baud rate). In our tests we set the CAN speed of the device to 1000000 and the speed of the other CAN nodes to 500000. The device is restarted and sends a CANopen “bootup message” to the CAN network. This results in huge amount of errors messages on the CAN bus, probably because of the CAN feature for acknowledging error messages. The error messages can’t be read by the device because of the misconfigured CAN speed, instead the CAN chip reports lots of errors, which are reported to the application which uses the CAN driver (CONFIG_CAN_ERRORS is enabled). The CAN errors are reported from the CAN chip via interrupts and thus the interrupt load is very high in this scenario. To fix the problem the driver now disables each RX error interrupt after it is occurred. The RX error interrupts are turned back on if at least one CAN message is received successfully. commit e298f48e96d9e34017dcab8e4d87032862ae9322 Author: Gregory Nutt <gnutt@nuttx.org> Date: Fri Jul 28 09:06:26 2017 -0600 Spirit: Bring in PktStack interfaces. commit 4a0f00a7058312dcf6ac392689b9f69112f613ec Merge: 855cf97130 b458934ac4 Author: Gregory Nutt <gnutt@nuttx.org> Date: Thu Jul 27 18:05:02 2017 -0600 Merge remote-tracking branch 'origin/master' into spirit commit 855cf9713052a851a1daeb3842db2edd6ff6f658 Author: Gregory Nutt <gnutt@nuttx.org> Date: Thu Jul 27 18:03:56 2017 -0600 Spirit Network Driver: Add some hooks that will eventually support address filtering. commit 3b3fb24ea86cf8233b034871d5c550f47ab852e6 Author: Gregory Nutt <gnutt@nuttx.org> Date: Thu Jul 27 17:13:21 2017 -0600 Spirit: Add a PktStack header file. commit 705e8fff6a21264ab751fb34c107cb109430ac89 Author: Gregory Nutt <gnutt@nuttx.org> Date: Thu Jul 27 15:00:03 2017 -0600 Spirit: Bring in last of timer interfaces. commit f8984b2f82e165f5bba132d6b099222d1beb1fbd Merge: cb79778a30 f287cc25d6 Author: Gregory Nutt <gnutt@nuttx.org> Date: Thu Jul 27 11:57:01 2017 -0600 Merge remote-tracking branch 'origin/master' into spirit commit cb79778a3044ae97a1cc615dfa24099144f04bd0 Author: Gregory Nutt <gnutt@nuttx.org> Date: Thu Jul 27 11:46:31 2017 -0600 Spirit: Bring in last of QI interfaces. commit 0245b330a33aa73531b82ae261b1312be9922e0f Author: Gregory Nutt <gnutt@nuttx.org> Date: Thu Jul 27 10:14:34 2017 -0600 Spirit: Add general interfaces. commit 121845a8f229ec2c88e5721da5512135f6624ee5 Author: Gregory Nutt <gnutt@nuttx.org> Date: Thu Jul 27 09:41:23 2017 -0600 Spirit: Bring in last of GPIO interfaces. commit 279bfcc92bcd0cfa48c0ed7862fa2b75fbee99b8 Author: Gregory Nutt <gnutt@nuttx.org> Date: Wed Jul 26 17:09:19 2017 -0600 Spirit: Add some missing configuration options: Add register -level debug options. commit 4be89324a5908e35afc70373c279f4d05f62b48f Merge: 66e87f9bb3 598386ef90 Author: Gregory Nutt <gnutt@nuttx.org> Date: Wed Jul 26 15:36:20 2017 -0600 Merge remote-tracking branch 'origin/master' into spirit commit 66e87f9bb3ef75fddf25400bc08475c5e6ad4c30 Author: Gregory Nutt <gnutt@nuttx.org> Date: Wed Jul 26 15:19:56 2017 -0600 Spirit: Brings in last of PktBasic logic. commit 8b4c89d6a103003fa04363e2c2ae7b9ee390bf49 Author: Gregory Nutt <gnutt@nuttx.org> Date: Wed Jul 26 11:55:50 2017 -0600 Spirit: Bring in AES and MBUS logic. commit d00022d39ab0ce839de29386949481e5c24feff3 Author: Gregory Nutt <gnutt@nuttx.org> Date: Wed Jul 26 09:22:03 2017 -0600 Spirit: Bring in remainder of calibration interfaces. commit 40b4b2f902e04293f8940551a97a9a24a48988dd Author: Gregory Nutt <gnutt@nuttx.org> Date: Wed Jul 26 08:44:32 2017 -0600 Spirit: Bring in DirectRF interfaces. commit 7c109608e1a2989f3edbc2fd939a2d225fff382a Author: Gregory Nutt <gnutt@nuttx.org> Date: Wed Jul 26 07:46:19 2017 -0600 Spirit: Add CSMA support. commit 0f88896595d162c4ac6138e7b1af2fc35c865b3d Author: Gregory Nutt <gnutt@nuttx.org> Date: Tue Jul 25 18:57:43 2017 -0600 Spirit: Add some initial TX logic to network driver. commit 4dc7058dfcdcf40980578680b7e1a4206dea4ea2 Author: Gregory Nutt <gnutt@nuttx.org> Date: Tue Jul 25 17:02:11 2017 -0600 Spirit: Completes ports of spirit_management.* files commit c904eef51d929e041b87d0c8aff6fa3c2f895341 Merge: 91e985a877 c9ff8cbab9 Author: Gregory Nutt <gnutt@nuttx.org> Date: Tue Jul 25 15:15:04 2017 -0600 Merge remote-tracking branch 'origin/master' into spirit commit 91e985a87729017a66d19276c4d47681064f95ea Author: Gregory Nutt <gnutt@nuttx.org> Date: Tue Jul 25 15:13:54 2017 -0600 Spirit: Add a few more functions that will soon be needed for packet transmission. commit b5981d29983907c2194fbc26af4b72ad532bee78 Author: Gregory Nutt <gnutt@nuttx.org> Date: Tue Jul 25 13:30:07 2017 -0600 Spirit: Finish off some initialization issues; Started some interrupt handling logic. commit c21073e0bc2870b3d9ba40bdfdfd5151ce4f5890 Author: Gregory Nutt <gnutt@nuttx.org> Date: Tue Jul 25 09:35:52 2017 -0600 Spirit: Completes very basic radio initialization for network driver commit 1b544334361c54f46bcf0ba313c125932e8dafc6 Author: Gregory Nutt <gnutt@nuttx.org> Date: Tue Jul 25 07:58:30 2017 -0600 Spirit: Add more radio initialization logic... getting closer. commit 45d1047db60843c57d394ec910c63e7c127671e0 Author: Gregory Nutt <gnutt@nuttx.org> Date: Mon Jul 24 19:15:33 2017 -0600 Spirit: add some CSMA initialization logic commit bcf55c71336d48947fe19bb09a799169852301c2 Merge: 89e9d426e9 2fc0fbcf7e Author: Gregory Nutt <gnutt@nuttx.org> Date: Mon Jul 24 16:47:11 2017 -0600 Merge remote-tracking branch 'origin/master' into spirit commit 89e9d426e91c056e659fccf5e5c4392618f8f777 Author: Gregory Nutt <gnutt@nuttx.org> Date: Mon Jul 24 16:44:19 2017 -0600 Update some comments commit 9c5d8a5833350006ed389e898b11c8c8a20e5f4f Author: Gregory Nutt <gnutt@nuttx.org> Date: Mon Jul 24 16:15:54 2017 -0600 Spirit: Rename drivers/wireless/spirit/src to lib. Move Spirit network driver out of IEEE802.15.4 into drivers/wireless/spirit/drivers commit cabc0ec9e6eb558dcb715ab17264383aa0105e7a Merge: 87b616414a 6bd744c4b3 Author: Gregory Nutt <gnutt@nuttx.org> Date: Mon Jul 24 15:38:40 2017 -0600 Merge remote-tracking branch 'origin/master' into spirit commit 87b616414a79c01a71acea78f8258e05325c1996 Author: Gregory Nutt <gnutt@nuttx.org> Date: Mon Jul 24 15:37:27 2017 -0600 Spirit radio driver is mutating into a standalone network driver. commit 507798233868a661ae8adad3e3aa117075a7a146 Author: Gregory Nutt <gnutt@nuttx.org> Date: Mon Jul 24 13:32:08 2017 -0600 Spirit: More radio initialization logic commit 33af25704ce9ca83d576300d153cfe31cc6d2576 Author: Gregory Nutt <gnutt@nuttx.org> Date: Mon Jul 24 12:19:14 2017 -0600 Spirit: Beginning of radio initialization logic commit 97b20014c016e55952a8f9d8f4ae29e2cc555b23 Author: Gregory Nutt <gnutt@nuttx.org> Date: Mon Jul 24 09:42:06 2017 -0600 Spirit: More initialization logic. commit 295d8e27824c0417fccea2344b30bb5c93ffbabe Author: Gregory Nutt <gnutt@nuttx.org> Date: Sun Jul 23 15:39:53 2017 -0600 Spirit: Add header file containing enumeration of commands. commit 8a2d9dd8eb9cc70cbcdd1b913fc9022b9c9ec8da Author: Gregory Nutt <gnutt@nuttx.org> Date: Sun Jul 23 11:33:50 2017 -0600 Spirit: Add GPIO initialization logic commit 8b6d80c44f92024c45a6ba63ba1af3fdafe94dc3 Author: Gregory Nutt <gnutt@nuttx.org> Date: Sun Jul 23 10:07:25 2017 -0600 Spirit: Add interrupt control logic. commit 423f846fe5c914f92a4bfea4d9d1fa33de1c77a5 Author: Gregory Nutt <gnutt@nuttx.org> Date: Sat Jul 22 19:06:52 2017 -0600 Spirit: Yet a little more radio initialization logic. commit 5895b979823e51ddde5ad52e6de66a8ad662e883 Author: Gregory Nutt <gnutt@nuttx.org> Date: Sat Jul 22 15:36:05 2017 -0600 Spirit: A little more radio initialization logic. commit 86311ab30aad386203c181c792847dd1d37f9a02 Author: Gregory Nutt <gnutt@nuttx.org> Date: Sat Jul 22 13:02:32 2017 -0600 Spirit: A miniscule amount of radio initialization logic. commit ad55e89d5ee12ea1eeea95fcd38ff3da0db4416a Merge: 90a7666655 f4e46b0da7 Author: Gregory Nutt <gnutt@nuttx.org> Date: Sat Jul 22 10:56:30 2017 -0600 Merge remote-tracking branch 'origin/master' into spirit commit 90a766665534b05da0157dbc383cb06a98c86a79 Author: Gregory Nutt <gnutt@nuttx.org> Date: Sat Jul 22 10:52:52 2017 -0600 Spirit1: A few fixes for a clean build of initial configuration (not much there yet) commit bbbf04c223230a52a7705a2161128265cfbaa480 Merge: 623d54a7f7 2319ea53a9 Author: Gregory Nutt <gnutt@nuttx.org> Date: Sat Jul 22 09:53:57 2017 -0600 Merge remote-tracking branch 'origin/master' into spirit commit 623d54a7f719e9032099f88f38203efee4b80722 Author: Gregory Nutt <gnutt@nuttx.org> Date: Sat Jul 22 09:43:52 2017 -0600 b-l475e-iot01a: Add a configuration for testing sprit radio. commit d309d73d9f4665f9d870eb03531f450043d9389d Merge: 52c3ddfae6 d88dc9b2e5 Author: Gregory Nutt <gnutt@nuttx.org> Date: Sat Jul 22 09:02:06 2017 -0600 Merge remote-tracking branch 'origin/master' into spirit commit 52c3ddfae6802e111c2b5cf1207baf21a61dd00b Author: Gregory Nutt <gnutt@nuttx.org> Date: Sat Jul 22 08:33:04 2017 -0600 Spirit: Add register definition header file. commit 8d842ab5e8f9ca653b42f9ee88dc279f06b4fa98 Author: Gregory Nutt <gnutt@nuttx.org> Date: Fri Jul 21 17:27:03 2017 -0600 b-l475e-iot01a: Add initial, unverified support for the SPSRGF/Spirit1 module. commit 73d902a1048616fb9c2dd2147cabcd8ee78e19ac Author: Gregory Nutt <gnutt@nuttx.org> Date: Fri Jul 21 15:49:43 2017 -0600 Spirit: Fixes to get skeleton IEEE 802.15.4 driver build. commit ebc5a8387bb94f0cc3827533795f3e4a33207e67 Author: Gregory Nutt <gnutt@nuttx.org> Date: Fri Jul 21 15:16:29 2017 -0600 Spirit1: Add framework for IEEE 802.15.4 driver. Does not yet build. commit 52e195a7ae14ddb18bdd56258f4877381d2501ca Author: Gregory Nutt <gnutt@nuttx.org> Date: Fri Jul 21 14:02:42 2017 -0600 Spirit: A little more SPI logic. commit 90048d0c5b8a5af4d81a15d99535c84ed38d8ae9 Author: Gregory Nutt <gnutt@nuttx.org> Date: Fri Jul 21 11:19:06 2017 -0600 Spirit: Build directories setup. Some initial files added, mostly just to verify build. commit 8273a381ac1f6bb081b292b5e73226185e9e634c Author: Gregory Nutt <gnutt@nuttx.org> Date: Fri Jul 21 08:34:04 2017 -0600 USB composite: Remove references to CDC/ACM and USB MSC from composite logic. They are no longer coupled.
2017-07-29 21:42:26 +02:00
nwarn("WARNING: Not routable\n");
2017-03-30 02:07:52 +02:00
return (ssize_t)-ENETUNREACH;
}
Squashed commit of the following: commit 7029dffd02156bcbfa84262671c2ca766a117191 Author: Gregory Nutt <gnutt@nuttx.org> Date: Sat Jul 29 12:02:13 2017 -0600 6LoWPAN PktRadio: Add missing MetaData-related prototypes and initialization logic. Perform a major renaming to make room in the 6LoWPAN name space for packet radios. commit e2012f7c1df14155c0bfd45d7f1cb3f71b259f48 Author: Gregory Nutt <gnutt@nuttx.org> Date: Sat Jul 29 10:16:23 2017 -0600 6LoWPAN PktRadio: Some initial changes to support raw packet radios without IEEE 802.15.4 with 6LoWPAN. commit c6dbf9178539b7da75e492ffd1d1f93c9c326299 Merge: da782d6cdf 5889ce65f5 Author: Gregory Nutt <gnutt@nuttx.org> Date: Sat Jul 29 07:30:08 2017 -0600 Merge remote-tracking branch 'origin/master' into spirit commit da782d6cdff5980d71aaa2da5f9c28ab3438d085 Author: Gregory Nutt <gnutt@nuttx.org> Date: Sat Jul 29 07:26:48 2017 -0600 Spirit: Completes port of the spirit radio library to NuttX. commit 63f3595c47dca13952d28b518c7f0a8d6ae9037a Author: Gregory Nutt <gnutt@nuttx.org> Date: Fri Jul 28 17:42:51 2017 -0600 Spirit: Bring in a couple ore more radio interface functions. commit 692a27da396b7683749790923d8fa085091764f1 Merge: 27c0a6ec08 38f79543dc Author: Gregory Nutt <gnutt@nuttx.org> Date: Fri Jul 28 15:49:37 2017 -0600 Merge remote-tracking branch 'origin/master' into spirit commit 27c0a6ec0813187f125922c81189a70cf04d83d4 Author: Gregory Nutt <gnutt@nuttx.org> Date: Fri Jul 28 15:47:27 2017 -0600 Spirit: Bring in a couple ore more radio interface functions. commit 96657af2831487724723a60084831619257fd953 Author: Gregory Nutt <gnutt@nuttx.org> Date: Fri Jul 28 14:20:14 2017 -0600 Spirit: Bring in more radio interface functions. commit 640d55399b54a019be68825668fca1446abd082f Merge: 3fcf84a9a2 47791442a0 Author: Gregory Nutt <gnutt@nuttx.org> Date: Fri Jul 28 12:01:43 2017 -0600 Merge remote-tracking branch 'origin/master' into spirit commit 3fcf84a9a2673e1e1466ce5b114d7b73c257e515 Author: Gregory Nutt <gnutt@nuttx.org> Date: Fri Jul 28 12:00:31 2017 -0600 Spirit: Brings in the last of the PktCommon interfaces. commit d26ebd901ba4ba84910e99b4e728b98c30fa4c0b Author: Gregory Nutt <gnutt@nuttx.org> Date: Fri Jul 28 09:54:52 2017 -0600 Spirit: Add a few more PktCommon interfaces. commit b5cb8041d50233a4abb8fb4d1dcef5428ae2c2b2 Author: Gregory Nutt <gnutt@nuttx.org> Date: Fri Jul 28 09:33:31 2017 -0600 libc/termios: Remember block comments before empty file sections. commit 0fcab2c1c8c74442d40bd5e8c6af50a34f8a5821 Author: Sebastien Lorquet <sebastien@lorquet.fr> Date: Fri Jul 28 09:31:00 2017 -0600 tcdrain implementation based on a new term ioctl commit 797d4adf7d41068c671f0217d369b797b269de1a Author: Stefan Kolb <Stefan.Kolb@avat.de> Date: Fri Jul 28 09:19:04 2017 -0600 We discovered a problem with the samv7 mcan driver which results, under some circumstances, in a very high CPU load. The problem occurs, and is easily reproducible, if the device is connected to a CAN network with a wrongly configured CAN speed (baud rate). In our tests we set the CAN speed of the device to 1000000 and the speed of the other CAN nodes to 500000. The device is restarted and sends a CANopen “bootup message” to the CAN network. This results in huge amount of errors messages on the CAN bus, probably because of the CAN feature for acknowledging error messages. The error messages can’t be read by the device because of the misconfigured CAN speed, instead the CAN chip reports lots of errors, which are reported to the application which uses the CAN driver (CONFIG_CAN_ERRORS is enabled). The CAN errors are reported from the CAN chip via interrupts and thus the interrupt load is very high in this scenario. To fix the problem the driver now disables each RX error interrupt after it is occurred. The RX error interrupts are turned back on if at least one CAN message is received successfully. commit e298f48e96d9e34017dcab8e4d87032862ae9322 Author: Gregory Nutt <gnutt@nuttx.org> Date: Fri Jul 28 09:06:26 2017 -0600 Spirit: Bring in PktStack interfaces. commit 4a0f00a7058312dcf6ac392689b9f69112f613ec Merge: 855cf97130 b458934ac4 Author: Gregory Nutt <gnutt@nuttx.org> Date: Thu Jul 27 18:05:02 2017 -0600 Merge remote-tracking branch 'origin/master' into spirit commit 855cf9713052a851a1daeb3842db2edd6ff6f658 Author: Gregory Nutt <gnutt@nuttx.org> Date: Thu Jul 27 18:03:56 2017 -0600 Spirit Network Driver: Add some hooks that will eventually support address filtering. commit 3b3fb24ea86cf8233b034871d5c550f47ab852e6 Author: Gregory Nutt <gnutt@nuttx.org> Date: Thu Jul 27 17:13:21 2017 -0600 Spirit: Add a PktStack header file. commit 705e8fff6a21264ab751fb34c107cb109430ac89 Author: Gregory Nutt <gnutt@nuttx.org> Date: Thu Jul 27 15:00:03 2017 -0600 Spirit: Bring in last of timer interfaces. commit f8984b2f82e165f5bba132d6b099222d1beb1fbd Merge: cb79778a30 f287cc25d6 Author: Gregory Nutt <gnutt@nuttx.org> Date: Thu Jul 27 11:57:01 2017 -0600 Merge remote-tracking branch 'origin/master' into spirit commit cb79778a3044ae97a1cc615dfa24099144f04bd0 Author: Gregory Nutt <gnutt@nuttx.org> Date: Thu Jul 27 11:46:31 2017 -0600 Spirit: Bring in last of QI interfaces. commit 0245b330a33aa73531b82ae261b1312be9922e0f Author: Gregory Nutt <gnutt@nuttx.org> Date: Thu Jul 27 10:14:34 2017 -0600 Spirit: Add general interfaces. commit 121845a8f229ec2c88e5721da5512135f6624ee5 Author: Gregory Nutt <gnutt@nuttx.org> Date: Thu Jul 27 09:41:23 2017 -0600 Spirit: Bring in last of GPIO interfaces. commit 279bfcc92bcd0cfa48c0ed7862fa2b75fbee99b8 Author: Gregory Nutt <gnutt@nuttx.org> Date: Wed Jul 26 17:09:19 2017 -0600 Spirit: Add some missing configuration options: Add register -level debug options. commit 4be89324a5908e35afc70373c279f4d05f62b48f Merge: 66e87f9bb3 598386ef90 Author: Gregory Nutt <gnutt@nuttx.org> Date: Wed Jul 26 15:36:20 2017 -0600 Merge remote-tracking branch 'origin/master' into spirit commit 66e87f9bb3ef75fddf25400bc08475c5e6ad4c30 Author: Gregory Nutt <gnutt@nuttx.org> Date: Wed Jul 26 15:19:56 2017 -0600 Spirit: Brings in last of PktBasic logic. commit 8b4c89d6a103003fa04363e2c2ae7b9ee390bf49 Author: Gregory Nutt <gnutt@nuttx.org> Date: Wed Jul 26 11:55:50 2017 -0600 Spirit: Bring in AES and MBUS logic. commit d00022d39ab0ce839de29386949481e5c24feff3 Author: Gregory Nutt <gnutt@nuttx.org> Date: Wed Jul 26 09:22:03 2017 -0600 Spirit: Bring in remainder of calibration interfaces. commit 40b4b2f902e04293f8940551a97a9a24a48988dd Author: Gregory Nutt <gnutt@nuttx.org> Date: Wed Jul 26 08:44:32 2017 -0600 Spirit: Bring in DirectRF interfaces. commit 7c109608e1a2989f3edbc2fd939a2d225fff382a Author: Gregory Nutt <gnutt@nuttx.org> Date: Wed Jul 26 07:46:19 2017 -0600 Spirit: Add CSMA support. commit 0f88896595d162c4ac6138e7b1af2fc35c865b3d Author: Gregory Nutt <gnutt@nuttx.org> Date: Tue Jul 25 18:57:43 2017 -0600 Spirit: Add some initial TX logic to network driver. commit 4dc7058dfcdcf40980578680b7e1a4206dea4ea2 Author: Gregory Nutt <gnutt@nuttx.org> Date: Tue Jul 25 17:02:11 2017 -0600 Spirit: Completes ports of spirit_management.* files commit c904eef51d929e041b87d0c8aff6fa3c2f895341 Merge: 91e985a877 c9ff8cbab9 Author: Gregory Nutt <gnutt@nuttx.org> Date: Tue Jul 25 15:15:04 2017 -0600 Merge remote-tracking branch 'origin/master' into spirit commit 91e985a87729017a66d19276c4d47681064f95ea Author: Gregory Nutt <gnutt@nuttx.org> Date: Tue Jul 25 15:13:54 2017 -0600 Spirit: Add a few more functions that will soon be needed for packet transmission. commit b5981d29983907c2194fbc26af4b72ad532bee78 Author: Gregory Nutt <gnutt@nuttx.org> Date: Tue Jul 25 13:30:07 2017 -0600 Spirit: Finish off some initialization issues; Started some interrupt handling logic. commit c21073e0bc2870b3d9ba40bdfdfd5151ce4f5890 Author: Gregory Nutt <gnutt@nuttx.org> Date: Tue Jul 25 09:35:52 2017 -0600 Spirit: Completes very basic radio initialization for network driver commit 1b544334361c54f46bcf0ba313c125932e8dafc6 Author: Gregory Nutt <gnutt@nuttx.org> Date: Tue Jul 25 07:58:30 2017 -0600 Spirit: Add more radio initialization logic... getting closer. commit 45d1047db60843c57d394ec910c63e7c127671e0 Author: Gregory Nutt <gnutt@nuttx.org> Date: Mon Jul 24 19:15:33 2017 -0600 Spirit: add some CSMA initialization logic commit bcf55c71336d48947fe19bb09a799169852301c2 Merge: 89e9d426e9 2fc0fbcf7e Author: Gregory Nutt <gnutt@nuttx.org> Date: Mon Jul 24 16:47:11 2017 -0600 Merge remote-tracking branch 'origin/master' into spirit commit 89e9d426e91c056e659fccf5e5c4392618f8f777 Author: Gregory Nutt <gnutt@nuttx.org> Date: Mon Jul 24 16:44:19 2017 -0600 Update some comments commit 9c5d8a5833350006ed389e898b11c8c8a20e5f4f Author: Gregory Nutt <gnutt@nuttx.org> Date: Mon Jul 24 16:15:54 2017 -0600 Spirit: Rename drivers/wireless/spirit/src to lib. Move Spirit network driver out of IEEE802.15.4 into drivers/wireless/spirit/drivers commit cabc0ec9e6eb558dcb715ab17264383aa0105e7a Merge: 87b616414a 6bd744c4b3 Author: Gregory Nutt <gnutt@nuttx.org> Date: Mon Jul 24 15:38:40 2017 -0600 Merge remote-tracking branch 'origin/master' into spirit commit 87b616414a79c01a71acea78f8258e05325c1996 Author: Gregory Nutt <gnutt@nuttx.org> Date: Mon Jul 24 15:37:27 2017 -0600 Spirit radio driver is mutating into a standalone network driver. commit 507798233868a661ae8adad3e3aa117075a7a146 Author: Gregory Nutt <gnutt@nuttx.org> Date: Mon Jul 24 13:32:08 2017 -0600 Spirit: More radio initialization logic commit 33af25704ce9ca83d576300d153cfe31cc6d2576 Author: Gregory Nutt <gnutt@nuttx.org> Date: Mon Jul 24 12:19:14 2017 -0600 Spirit: Beginning of radio initialization logic commit 97b20014c016e55952a8f9d8f4ae29e2cc555b23 Author: Gregory Nutt <gnutt@nuttx.org> Date: Mon Jul 24 09:42:06 2017 -0600 Spirit: More initialization logic. commit 295d8e27824c0417fccea2344b30bb5c93ffbabe Author: Gregory Nutt <gnutt@nuttx.org> Date: Sun Jul 23 15:39:53 2017 -0600 Spirit: Add header file containing enumeration of commands. commit 8a2d9dd8eb9cc70cbcdd1b913fc9022b9c9ec8da Author: Gregory Nutt <gnutt@nuttx.org> Date: Sun Jul 23 11:33:50 2017 -0600 Spirit: Add GPIO initialization logic commit 8b6d80c44f92024c45a6ba63ba1af3fdafe94dc3 Author: Gregory Nutt <gnutt@nuttx.org> Date: Sun Jul 23 10:07:25 2017 -0600 Spirit: Add interrupt control logic. commit 423f846fe5c914f92a4bfea4d9d1fa33de1c77a5 Author: Gregory Nutt <gnutt@nuttx.org> Date: Sat Jul 22 19:06:52 2017 -0600 Spirit: Yet a little more radio initialization logic. commit 5895b979823e51ddde5ad52e6de66a8ad662e883 Author: Gregory Nutt <gnutt@nuttx.org> Date: Sat Jul 22 15:36:05 2017 -0600 Spirit: A little more radio initialization logic. commit 86311ab30aad386203c181c792847dd1d37f9a02 Author: Gregory Nutt <gnutt@nuttx.org> Date: Sat Jul 22 13:02:32 2017 -0600 Spirit: A miniscule amount of radio initialization logic. commit ad55e89d5ee12ea1eeea95fcd38ff3da0db4416a Merge: 90a7666655 f4e46b0da7 Author: Gregory Nutt <gnutt@nuttx.org> Date: Sat Jul 22 10:56:30 2017 -0600 Merge remote-tracking branch 'origin/master' into spirit commit 90a766665534b05da0157dbc383cb06a98c86a79 Author: Gregory Nutt <gnutt@nuttx.org> Date: Sat Jul 22 10:52:52 2017 -0600 Spirit1: A few fixes for a clean build of initial configuration (not much there yet) commit bbbf04c223230a52a7705a2161128265cfbaa480 Merge: 623d54a7f7 2319ea53a9 Author: Gregory Nutt <gnutt@nuttx.org> Date: Sat Jul 22 09:53:57 2017 -0600 Merge remote-tracking branch 'origin/master' into spirit commit 623d54a7f719e9032099f88f38203efee4b80722 Author: Gregory Nutt <gnutt@nuttx.org> Date: Sat Jul 22 09:43:52 2017 -0600 b-l475e-iot01a: Add a configuration for testing sprit radio. commit d309d73d9f4665f9d870eb03531f450043d9389d Merge: 52c3ddfae6 d88dc9b2e5 Author: Gregory Nutt <gnutt@nuttx.org> Date: Sat Jul 22 09:02:06 2017 -0600 Merge remote-tracking branch 'origin/master' into spirit commit 52c3ddfae6802e111c2b5cf1207baf21a61dd00b Author: Gregory Nutt <gnutt@nuttx.org> Date: Sat Jul 22 08:33:04 2017 -0600 Spirit: Add register definition header file. commit 8d842ab5e8f9ca653b42f9ee88dc279f06b4fa98 Author: Gregory Nutt <gnutt@nuttx.org> Date: Fri Jul 21 17:27:03 2017 -0600 b-l475e-iot01a: Add initial, unverified support for the SPSRGF/Spirit1 module. commit 73d902a1048616fb9c2dd2147cabcd8ee78e19ac Author: Gregory Nutt <gnutt@nuttx.org> Date: Fri Jul 21 15:49:43 2017 -0600 Spirit: Fixes to get skeleton IEEE 802.15.4 driver build. commit ebc5a8387bb94f0cc3827533795f3e4a33207e67 Author: Gregory Nutt <gnutt@nuttx.org> Date: Fri Jul 21 15:16:29 2017 -0600 Spirit1: Add framework for IEEE 802.15.4 driver. Does not yet build. commit 52e195a7ae14ddb18bdd56258f4877381d2501ca Author: Gregory Nutt <gnutt@nuttx.org> Date: Fri Jul 21 14:02:42 2017 -0600 Spirit: A little more SPI logic. commit 90048d0c5b8a5af4d81a15d99535c84ed38d8ae9 Author: Gregory Nutt <gnutt@nuttx.org> Date: Fri Jul 21 11:19:06 2017 -0600 Spirit: Build directories setup. Some initial files added, mostly just to verify build. commit 8273a381ac1f6bb081b292b5e73226185e9e634c Author: Gregory Nutt <gnutt@nuttx.org> Date: Fri Jul 21 08:34:04 2017 -0600 USB composite: Remove references to CDC/ACM and USB MSC from composite logic. They are no longer coupled.
2017-07-29 21:42:26 +02:00
/* Some network devices support different link layer protocols.
* Check if this device has the hooks to support 6LoWPAN.
*/
if (dev->d_lltype != NET_LL_IEEE802154 &&
dev->d_lltype != NET_LL_PKTRADIO)
{
nwarn("WARNING: Not a compatible network device\n");
return (ssize_t)-ENONET;
}
2017-03-30 02:07:52 +02:00
#ifdef CONFIG_NET_ICMPv6_NEIGHBOR
/* Make sure that the IP address mapping is in the Neighbor Table */
ret = icmpv6_neighbor(dev, to6->sin6_addr.in6_u.u6_addr16);
2017-03-30 02:07:52 +02:00
if (ret < 0)
{
nerr("ERROR: Not reachable\n");
return (ssize_t)-ENETUNREACH;
}
#endif
/* Initialize the IPv6/UDP headers */
ipv6udp.ipv6.vtc = 0x60;
ipv6udp.ipv6.tcf = 0x00;
ipv6udp.ipv6.flow = 0x00;
ipv6udp.ipv6.proto = IP_PROTO_UDP;
ipv6udp.ipv6.ttl = conn->sconn.s_ttl;
/* The IPv6 header length field does not include the size of IPv6 IP
* header.
*/
iplen = buflen + UDP_HDRLEN;
ipv6udp.ipv6.len[0] = (iplen >> 8);
ipv6udp.ipv6.len[1] = (iplen & 0xff);
/* Copy the source and destination addresses */
net_ipv6addr_hdrcopy(ipv6udp.ipv6.destipaddr,
to6->sin6_addr.in6_u.u6_addr16);
if (!net_ipv6addr_cmp(conn->u.ipv6.laddr, g_ipv6_unspecaddr))
{
net_ipv6addr_hdrcopy(ipv6udp.ipv6.srcipaddr, conn->u.ipv6.laddr);
}
else
{
net_ipv6addr_hdrcopy(ipv6udp.ipv6.srcipaddr,
netdev_ipv6_srcaddr(dev, ipv6udp.ipv6.destipaddr));
}
ninfo("IPv6 length: %d\n",
((int)ipv6udp.ipv6.len[0] << 8) + ipv6udp.ipv6.len[1]);
#ifdef CONFIG_NET_STATISTICS
g_netstats.ipv6.sent++;
#endif
/* Initialize the UDP header */
ipv6udp.udp.srcport = conn->lport;
ipv6udp.udp.destport = to6->sin6_port;
ipv6udp.udp.udplen = HTONS(iplen);
ipv6udp.udp.udpchksum = 0;
#ifdef CONFIG_NET_UDP_CHECKSUMS
ipv6udp.udp.udpchksum = ~sixlowpan_udp_chksum(&ipv6udp, buf, buflen);
if (ipv6udp.udp.udpchksum == 0)
{
ipv6udp.udp.udpchksum = 0xffff;
}
#endif /* CONFIG_NET_UDP_CHECKSUMS */
ninfo("Outgoing UDP packet length: %d\n", iplen + IPv6_HDRLEN);
#ifdef CONFIG_NET_STATISTICS
g_netstats.udp.sent++;
#endif
2017-03-30 02:07:52 +02:00
/* Get the IEEE 802.15.4 MAC address of the next hop. */
ret = sixlowpan_nexthopaddr((FAR struct radio_driver_s *)dev,
to6->sin6_addr.in6_u.u6_addr16, &destmac);
if (ret < 0)
{
nerr("ERROR: Failed to get dest MAC address: %d\n", ret);
return (ssize_t)ret;
}
2017-06-19 00:00:08 +02:00
/* If routable, then call sixlowpan_send() to format and send the 6LoWPAN
2017-03-30 02:07:52 +02:00
* packet.
*/
ret = sixlowpan_send(dev,
&conn->sconn.list,
&conn->sconn.list_tail,
(FAR const struct ipv6_hdr_s *)&ipv6udp,
buf, buflen, &destmac,
_SO_TIMEOUT(conn->sconn.s_sndtimeo));
2017-03-30 02:07:52 +02:00
if (ret < 0)
{
nerr("ERROR: sixlowpan_send() failed: %d\n", ret);
}
return (ssize_t)ret;
2017-03-30 02:07:52 +02:00
}
2017-04-02 19:15:46 +02:00
/****************************************************************************
* Name: psock_6lowpan_udp_send
2017-04-02 19:15:46 +02:00
*
* Description:
* psock_6lowpan_udp_send() call may be used with connectionlesss UDP
* sockets.
*
* Input Parameters:
* psock - An instance of the internal socket structure.
* buf - Data to send
* buflen - Length of data to send
2017-04-02 19:15:46 +02:00
*
* Returned Value:
* On success, returns the number of characters sent. On error,
* -1 is returned, and errno is set appropriately. Returned error numbers
* must be consistent with definition of errors reported by send().
*
* Assumptions:
* Called with the network locked.
*
****************************************************************************/
ssize_t psock_6lowpan_udp_send(FAR struct socket *psock, FAR const void *buf,
size_t buflen)
2017-04-02 19:15:46 +02:00
{
FAR struct udp_conn_s *conn;
struct sockaddr_in6 to;
ninfo("buflen %lu\n", (unsigned long)buflen);
2017-04-02 19:15:46 +02:00
DEBUGASSERT(psock->s_type == SOCK_DGRAM);
sixlowpan_dumpbuffer("Outgoing UDP payload", buf, buflen);
2017-04-02 19:15:46 +02:00
/* Make sure that this is a valid socket */
if (psock == NULL || psock->s_conn == NULL)
2017-04-02 19:15:46 +02:00
{
nerr("ERROR: Invalid socket\n");
return (ssize_t)-EBADF;
}
/* Get the underlying UDP "connection" structure */
conn = psock->s_conn;
2017-04-02 19:15:46 +02:00
/* Was the UDP socket connected via connect()? */
if (psock->s_type != SOCK_DGRAM || !_SS_ISCONNECTED(conn->sconn.s_flags))
2017-04-02 19:15:46 +02:00
{
/* No, then it is not legal to call send() with this socket. */
return -ENOTCONN;
}
/* Ignore if not IPv6 domain */
if (conn->domain != PF_INET6)
{
nwarn("WARNING: Not IPv6\n");
return (ssize_t)-EPROTOTYPE;
}
/* Create the 'to' address */
to.sin6_family = AF_INET6;
to.sin6_port = conn->rport; /* Already network order */
memcpy(to.sin6_addr.in6_u.u6_addr16, conn->u.ipv6.raddr, 16);
return psock_6lowpan_udp_sendto(psock, buf, buflen, 0,
2017-04-02 19:15:46 +02:00
(FAR const struct sockaddr *)&to,
sizeof(struct sockaddr_in6));
}
/****************************************************************************
* Name: sixlowpan_udp_send
*
* Description:
* Handles forwarding a UDP packet via 6LoWPAN. This is currently only
* used by the IPv6 forwarding logic.
*
* Input Parameters:
* dev - An instance of network device state structure
* fwddev - The network device used to send the data. This will be the
* same device except for the IP forwarding case where packets
* are sent across devices.
* ipv6 - A pointer to the IPv6 header in dev->d_buf which lies AFTER
* the L1 header. NOTE: dev->d_len must have been decremented
* by the size of any preceding MAC header.
*
* Returned Value:
* None
*
* Assumptions:
* Called with the network locked.
*
****************************************************************************/
#ifdef CONFIG_NET_IPFORWARD
void sixlowpan_udp_send(FAR struct net_driver_s *dev,
FAR struct net_driver_s *fwddev,
FAR struct ipv6_hdr_s *ipv6)
{
FAR struct ipv6udp_hdr_s *ipv6udp = (FAR struct ipv6udp_hdr_s *)ipv6;
/* Double check */
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
DEBUGASSERT(dev != NULL && dev->d_len > 0 && fwddev != NULL);
ninfo("d_len %u\n", dev->d_len);
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
if (dev != NULL && dev->d_len > 0 && fwddev != NULL)
{
sixlowpan_dumpbuffer("Outgoing UDP packet",
(FAR const uint8_t *)ipv6udp, dev->d_len);
/* The UDP data payload should follow the IPv6 header plus the
* protocol header.
*/
if (ipv6udp->ipv6.proto != IP_PROTO_UDP)
{
nwarn("WARNING: Expected UDP prototype: %u vs %u\n",
ipv6udp->ipv6.proto, IP_PROTO_UDP);
}
else
{
Squashed commit of the following: commit f97da3a546f9d6e1b858cfc45538a06b62396034 Author: Gregory Nutt <gnutt@nuttx.org> Date: Sun Jul 30 19:09:46 2017 -0600 Network: Condition out some types that depend on definitions that are only available with 6LoWPAN is enabled. commit 312e9dc1195527100e12bf6be8b629f5b29be1f6 Author: Gregory Nutt <gnutt@nuttx.org> Date: Sun Jul 30 18:57:23 2017 -0600 6LoWPAN: Fix case where source and destination IP address were backward. Fix some compile issues when star topology support is enabled. commit 3b0e71c5807194fbb006d0560bb2c98133055ba3 Author: Gregory Nutt <gnutt@nuttx.org> Date: Sun Jul 30 16:01:48 2017 -0600 6LoWPAN PktRadio: Finishes up all logic; Lots of misc changes from build testing. commit cc118f8cb335e1c48354fd7112e20be57de50b68 Author: Gregory Nutt <gnutt@nuttx.org> Date: Sun Jul 30 12:41:18 2017 -0600 6LoWPAN: Remove explicate type struct ieee802154_frame_meta_s from derive interface methods. Replace with a opaque void * type so that other radio meta data structures may use the interfaces. Add a new radion interface to get properties of the radio. Spirit: Finish packet I/O interface with the network. commit 1aa0a63e8341ca5f9f88c294f96d1740459146d4 Author: Gregory Nutt <gnutt@nuttx.org> Date: Sun Jul 30 07:57:15 2017 -0600 6LoWPAN: Replace metadata input parameter type from struct ieee802154_data_ind_s to void*. This permits radios with different MAC metadata to interact with 6LoWPAN. Includes many changes to handle variable length radio addresses. No longer just short and exteneded; any length. commit 46266ace61ae6246123873935436d864c7de31e0 Author: Gregory Nutt <gnutt@nuttx.org> Date: Sat Jul 29 17:50:42 2017 -0600 Spirit: Fix typos in SPI debug code. commit 27c6b235f6a2d3b2f08da4920b224a40e9991f59 Merge: 7029dffd02 7f53e08917 Author: Gregory Nutt <gnutt@nuttx.org> Date: Sat Jul 29 13:43:02 2017 -0600 Merge remote-tracking branch 'origin/master' into spirit commit 7029dffd02156bcbfa84262671c2ca766a117191 Author: Gregory Nutt <gnutt@nuttx.org> Date: Sat Jul 29 12:02:13 2017 -0600 6LoWPAN PktRadio: Add missing MetaData-related prototypes and initialization logic. Perform a major renaming to make room in the 6LoWPAN name space for packet radios. commit e2012f7c1df14155c0bfd45d7f1cb3f71b259f48 Author: Gregory Nutt <gnutt@nuttx.org> Date: Sat Jul 29 10:16:23 2017 -0600 6LoWPAN PktRadio: Some initial changes to support raw packet radios without IEEE 802.15.4 with 6LoWPAN. commit c6dbf9178539b7da75e492ffd1d1f93c9c326299 Merge: da782d6cdf 5889ce65f5 Author: Gregory Nutt <gnutt@nuttx.org> Date: Sat Jul 29 07:30:08 2017 -0600 Merge remote-tracking branch 'origin/master' into spirit commit da782d6cdff5980d71aaa2da5f9c28ab3438d085 Author: Gregory Nutt <gnutt@nuttx.org> Date: Sat Jul 29 07:26:48 2017 -0600 Spirit: Completes port of the spirit radio library to NuttX. commit 63f3595c47dca13952d28b518c7f0a8d6ae9037a Author: Gregory Nutt <gnutt@nuttx.org> Date: Fri Jul 28 17:42:51 2017 -0600 Spirit: Bring in a couple ore more radio interface functions. commit 692a27da396b7683749790923d8fa085091764f1 Merge: 27c0a6ec08 38f79543dc Author: Gregory Nutt <gnutt@nuttx.org> Date: Fri Jul 28 15:49:37 2017 -0600 Merge remote-tracking branch 'origin/master' into spirit commit 27c0a6ec0813187f125922c81189a70cf04d83d4 Author: Gregory Nutt <gnutt@nuttx.org> Date: Fri Jul 28 15:47:27 2017 -0600 Spirit: Bring in a couple ore more radio interface functions. commit 96657af2831487724723a60084831619257fd953 Author: Gregory Nutt <gnutt@nuttx.org> Date: Fri Jul 28 14:20:14 2017 -0600 Spirit: Bring in more radio interface functions. commit 640d55399b54a019be68825668fca1446abd082f Merge: 3fcf84a9a2 47791442a0 Author: Gregory Nutt <gnutt@nuttx.org> Date: Fri Jul 28 12:01:43 2017 -0600 Merge remote-tracking branch 'origin/master' into spirit commit 3fcf84a9a2673e1e1466ce5b114d7b73c257e515 Author: Gregory Nutt <gnutt@nuttx.org> Date: Fri Jul 28 12:00:31 2017 -0600 Spirit: Brings in the last of the PktCommon interfaces. commit d26ebd901ba4ba84910e99b4e728b98c30fa4c0b Author: Gregory Nutt <gnutt@nuttx.org> Date: Fri Jul 28 09:54:52 2017 -0600 Spirit: Add a few more PktCommon interfaces. commit b5cb8041d50233a4abb8fb4d1dcef5428ae2c2b2 Author: Gregory Nutt <gnutt@nuttx.org> Date: Fri Jul 28 09:33:31 2017 -0600 libc/termios: Remember block comments before empty file sections. commit 0fcab2c1c8c74442d40bd5e8c6af50a34f8a5821 Author: Sebastien Lorquet <sebastien@lorquet.fr> Date: Fri Jul 28 09:31:00 2017 -0600 tcdrain implementation based on a new term ioctl commit 797d4adf7d41068c671f0217d369b797b269de1a Author: Stefan Kolb <Stefan.Kolb@avat.de> Date: Fri Jul 28 09:19:04 2017 -0600 We discovered a problem with the samv7 mcan driver which results, under some circumstances, in a very high CPU load. The problem occurs, and is easily reproducible, if the device is connected to a CAN network with a wrongly configured CAN speed (baud rate). In our tests we set the CAN speed of the device to 1000000 and the speed of the other CAN nodes to 500000. The device is restarted and sends a CANopen “bootup message” to the CAN network. This results in huge amount of errors messages on the CAN bus, probably because of the CAN feature for acknowledging error messages. The error messages can’t be read by the device because of the misconfigured CAN speed, instead the CAN chip reports lots of errors, which are reported to the application which uses the CAN driver (CONFIG_CAN_ERRORS is enabled). The CAN errors are reported from the CAN chip via interrupts and thus the interrupt load is very high in this scenario. To fix the problem the driver now disables each RX error interrupt after it is occurred. The RX error interrupts are turned back on if at least one CAN message is received successfully. commit e298f48e96d9e34017dcab8e4d87032862ae9322 Author: Gregory Nutt <gnutt@nuttx.org> Date: Fri Jul 28 09:06:26 2017 -0600 Spirit: Bring in PktStack interfaces. commit 4a0f00a7058312dcf6ac392689b9f69112f613ec Merge: 855cf97130 b458934ac4 Author: Gregory Nutt <gnutt@nuttx.org> Date: Thu Jul 27 18:05:02 2017 -0600 Merge remote-tracking branch 'origin/master' into spirit commit 855cf9713052a851a1daeb3842db2edd6ff6f658 Author: Gregory Nutt <gnutt@nuttx.org> Date: Thu Jul 27 18:03:56 2017 -0600 Spirit Network Driver: Add some hooks that will eventually support address filtering. commit 3b3fb24ea86cf8233b034871d5c550f47ab852e6 Author: Gregory Nutt <gnutt@nuttx.org> Date: Thu Jul 27 17:13:21 2017 -0600 Spirit: Add a PktStack header file. commit 705e8fff6a21264ab751fb34c107cb109430ac89 Author: Gregory Nutt <gnutt@nuttx.org> Date: Thu Jul 27 15:00:03 2017 -0600 Spirit: Bring in last of timer interfaces. commit f8984b2f82e165f5bba132d6b099222d1beb1fbd Merge: cb79778a30 f287cc25d6 Author: Gregory Nutt <gnutt@nuttx.org> Date: Thu Jul 27 11:57:01 2017 -0600 Merge remote-tracking branch 'origin/master' into spirit commit cb79778a3044ae97a1cc615dfa24099144f04bd0 Author: Gregory Nutt <gnutt@nuttx.org> Date: Thu Jul 27 11:46:31 2017 -0600 Spirit: Bring in last of QI interfaces. commit 0245b330a33aa73531b82ae261b1312be9922e0f Author: Gregory Nutt <gnutt@nuttx.org> Date: Thu Jul 27 10:14:34 2017 -0600 Spirit: Add general interfaces. commit 121845a8f229ec2c88e5721da5512135f6624ee5 Author: Gregory Nutt <gnutt@nuttx.org> Date: Thu Jul 27 09:41:23 2017 -0600 Spirit: Bring in last of GPIO interfaces. commit 279bfcc92bcd0cfa48c0ed7862fa2b75fbee99b8 Author: Gregory Nutt <gnutt@nuttx.org> Date: Wed Jul 26 17:09:19 2017 -0600 Spirit: Add some missing configuration options: Add register -level debug options. commit 4be89324a5908e35afc70373c279f4d05f62b48f Merge: 66e87f9bb3 598386ef90 Author: Gregory Nutt <gnutt@nuttx.org> Date: Wed Jul 26 15:36:20 2017 -0600 Merge remote-tracking branch 'origin/master' into spirit commit 66e87f9bb3ef75fddf25400bc08475c5e6ad4c30 Author: Gregory Nutt <gnutt@nuttx.org> Date: Wed Jul 26 15:19:56 2017 -0600 Spirit: Brings in last of PktBasic logic. commit 8b4c89d6a103003fa04363e2c2ae7b9ee390bf49 Author: Gregory Nutt <gnutt@nuttx.org> Date: Wed Jul 26 11:55:50 2017 -0600 Spirit: Bring in AES and MBUS logic. commit d00022d39ab0ce839de29386949481e5c24feff3 Author: Gregory Nutt <gnutt@nuttx.org> Date: Wed Jul 26 09:22:03 2017 -0600 Spirit: Bring in remainder of calibration interfaces. commit 40b4b2f902e04293f8940551a97a9a24a48988dd Author: Gregory Nutt <gnutt@nuttx.org> Date: Wed Jul 26 08:44:32 2017 -0600 Spirit: Bring in DirectRF interfaces. commit 7c109608e1a2989f3edbc2fd939a2d225fff382a Author: Gregory Nutt <gnutt@nuttx.org> Date: Wed Jul 26 07:46:19 2017 -0600 Spirit: Add CSMA support. commit 0f88896595d162c4ac6138e7b1af2fc35c865b3d Author: Gregory Nutt <gnutt@nuttx.org> Date: Tue Jul 25 18:57:43 2017 -0600 Spirit: Add some initial TX logic to network driver. commit 4dc7058dfcdcf40980578680b7e1a4206dea4ea2 Author: Gregory Nutt <gnutt@nuttx.org> Date: Tue Jul 25 17:02:11 2017 -0600 Spirit: Completes ports of spirit_management.* files commit c904eef51d929e041b87d0c8aff6fa3c2f895341 Merge: 91e985a877 c9ff8cbab9 Author: Gregory Nutt <gnutt@nuttx.org> Date: Tue Jul 25 15:15:04 2017 -0600 Merge remote-tracking branch 'origin/master' into spirit commit 91e985a87729017a66d19276c4d47681064f95ea Author: Gregory Nutt <gnutt@nuttx.org> Date: Tue Jul 25 15:13:54 2017 -0600 Spirit: Add a few more functions that will soon be needed for packet transmission. commit b5981d29983907c2194fbc26af4b72ad532bee78 Author: Gregory Nutt <gnutt@nuttx.org> Date: Tue Jul 25 13:30:07 2017 -0600 Spirit: Finish off some initialization issues; Started some interrupt handling logic. commit c21073e0bc2870b3d9ba40bdfdfd5151ce4f5890 Author: Gregory Nutt <gnutt@nuttx.org> Date: Tue Jul 25 09:35:52 2017 -0600 Spirit: Completes very basic radio initialization for network driver commit 1b544334361c54f46bcf0ba313c125932e8dafc6 Author: Gregory Nutt <gnutt@nuttx.org> Date: Tue Jul 25 07:58:30 2017 -0600 Spirit: Add more radio initialization logic... getting closer. commit 45d1047db60843c57d394ec910c63e7c127671e0 Author: Gregory Nutt <gnutt@nuttx.org> Date: Mon Jul 24 19:15:33 2017 -0600 Spirit: add some CSMA initialization logic commit bcf55c71336d48947fe19bb09a799169852301c2 Merge: 89e9d426e9 2fc0fbcf7e Author: Gregory Nutt <gnutt@nuttx.org> Date: Mon Jul 24 16:47:11 2017 -0600 Merge remote-tracking branch 'origin/master' into spirit commit 89e9d426e91c056e659fccf5e5c4392618f8f777 Author: Gregory Nutt <gnutt@nuttx.org> Date: Mon Jul 24 16:44:19 2017 -0600 Update some comments commit 9c5d8a5833350006ed389e898b11c8c8a20e5f4f Author: Gregory Nutt <gnutt@nuttx.org> Date: Mon Jul 24 16:15:54 2017 -0600 Spirit: Rename drivers/wireless/spirit/src to lib. Move Spirit network driver out of IEEE802.15.4 into drivers/wireless/spirit/drivers commit cabc0ec9e6eb558dcb715ab17264383aa0105e7a Merge: 87b616414a 6bd744c4b3 Author: Gregory Nutt <gnutt@nuttx.org> Date: Mon Jul 24 15:38:40 2017 -0600 Merge remote-tracking branch 'origin/master' into spirit commit 87b616414a79c01a71acea78f8258e05325c1996 Author: Gregory Nutt <gnutt@nuttx.org> Date: Mon Jul 24 15:37:27 2017 -0600 Spirit radio driver is mutating into a standalone network driver. commit 507798233868a661ae8adad3e3aa117075a7a146 Author: Gregory Nutt <gnutt@nuttx.org> Date: Mon Jul 24 13:32:08 2017 -0600 Spirit: More radio initialization logic commit 33af25704ce9ca83d576300d153cfe31cc6d2576 Author: Gregory Nutt <gnutt@nuttx.org> Date: Mon Jul 24 12:19:14 2017 -0600 Spirit: Beginning of radio initialization logic commit 97b20014c016e55952a8f9d8f4ae29e2cc555b23 Author: Gregory Nutt <gnutt@nuttx.org> Date: Mon Jul 24 09:42:06 2017 -0600 Spirit: More initialization logic. commit 295d8e27824c0417fccea2344b30bb5c93ffbabe Author: Gregory Nutt <gnutt@nuttx.org> Date: Sun Jul 23 15:39:53 2017 -0600 Spirit: Add header file containing enumeration of commands. commit 8a2d9dd8eb9cc70cbcdd1b913fc9022b9c9ec8da Author: Gregory Nutt <gnutt@nuttx.org> Date: Sun Jul 23 11:33:50 2017 -0600 Spirit: Add GPIO initialization logic commit 8b6d80c44f92024c45a6ba63ba1af3fdafe94dc3 Author: Gregory Nutt <gnutt@nuttx.org> Date: Sun Jul 23 10:07:25 2017 -0600 Spirit: Add interrupt control logic. commit 423f846fe5c914f92a4bfea4d9d1fa33de1c77a5 Author: Gregory Nutt <gnutt@nuttx.org> Date: Sat Jul 22 19:06:52 2017 -0600 Spirit: Yet a little more radio initialization logic. commit 5895b979823e51ddde5ad52e6de66a8ad662e883 Author: Gregory Nutt <gnutt@nuttx.org> Date: Sat Jul 22 15:36:05 2017 -0600 Spirit: A little more radio initialization logic. commit 86311ab30aad386203c181c792847dd1d37f9a02 Author: Gregory Nutt <gnutt@nuttx.org> Date: Sat Jul 22 13:02:32 2017 -0600 Spirit: A miniscule amount of radio initialization logic. commit ad55e89d5ee12ea1eeea95fcd38ff3da0db4416a Merge: 90a7666655 f4e46b0da7 Author: Gregory Nutt <gnutt@nuttx.org> Date: Sat Jul 22 10:56:30 2017 -0600 Merge remote-tracking branch 'origin/master' into spirit commit 90a766665534b05da0157dbc383cb06a98c86a79 Author: Gregory Nutt <gnutt@nuttx.org> Date: Sat Jul 22 10:52:52 2017 -0600 Spirit1: A few fixes for a clean build of initial configuration (not much there yet) commit bbbf04c223230a52a7705a2161128265cfbaa480 Merge: 623d54a7f7 2319ea53a9 Author: Gregory Nutt <gnutt@nuttx.org> Date: Sat Jul 22 09:53:57 2017 -0600 Merge remote-tracking branch 'origin/master' into spirit commit 623d54a7f719e9032099f88f38203efee4b80722 Author: Gregory Nutt <gnutt@nuttx.org> Date: Sat Jul 22 09:43:52 2017 -0600 b-l475e-iot01a: Add a configuration for testing sprit radio. commit d309d73d9f4665f9d870eb03531f450043d9389d Merge: 52c3ddfae6 d88dc9b2e5 Author: Gregory Nutt <gnutt@nuttx.org> Date: Sat Jul 22 09:02:06 2017 -0600 Merge remote-tracking branch 'origin/master' into spirit commit 52c3ddfae6802e111c2b5cf1207baf21a61dd00b Author: Gregory Nutt <gnutt@nuttx.org> Date: Sat Jul 22 08:33:04 2017 -0600 Spirit: Add register definition header file. commit 8d842ab5e8f9ca653b42f9ee88dc279f06b4fa98 Author: Gregory Nutt <gnutt@nuttx.org> Date: Fri Jul 21 17:27:03 2017 -0600 b-l475e-iot01a: Add initial, unverified support for the SPSRGF/Spirit1 module. commit 73d902a1048616fb9c2dd2147cabcd8ee78e19ac Author: Gregory Nutt <gnutt@nuttx.org> Date: Fri Jul 21 15:49:43 2017 -0600 Spirit: Fixes to get skeleton IEEE 802.15.4 driver build. commit ebc5a8387bb94f0cc3827533795f3e4a33207e67 Author: Gregory Nutt <gnutt@nuttx.org> Date: Fri Jul 21 15:16:29 2017 -0600 Spirit1: Add framework for IEEE 802.15.4 driver. Does not yet build. commit 52e195a7ae14ddb18bdd56258f4877381d2501ca Author: Gregory Nutt <gnutt@nuttx.org> Date: Fri Jul 21 14:02:42 2017 -0600 Spirit: A little more SPI logic. commit 90048d0c5b8a5af4d81a15d99535c84ed38d8ae9 Author: Gregory Nutt <gnutt@nuttx.org> Date: Fri Jul 21 11:19:06 2017 -0600 Spirit: Build directories setup. Some initial files added, mostly just to verify build. commit 8273a381ac1f6bb081b292b5e73226185e9e634c Author: Gregory Nutt <gnutt@nuttx.org> Date: Fri Jul 21 08:34:04 2017 -0600 USB composite: Remove references to CDC/ACM and USB MSC from composite logic. They are no longer coupled.
2017-07-31 03:10:51 +02:00
struct netdev_varaddr_s destmac;
FAR uint8_t *buf;
uint16_t hdrlen;
uint16_t buflen;
int ret;
/* Get the IEEE 802.15.4 MAC address of the next hop. */
ret = sixlowpan_nexthopaddr((FAR struct radio_driver_s *)fwddev,
ipv6udp->ipv6.destipaddr, &destmac);
if (ret < 0)
{
nerr("ERROR: Failed to get dest MAC address: %d\n", ret);
goto drop;
}
/* Get the IPv6 + UDP combined header length. */
hdrlen = IPv6_HDRLEN + UDP_HDRLEN;
/* Drop the packet if the buffer length is less than this. */
if (hdrlen > dev->d_len)
{
nwarn("WARNING: Dropping small UDP packet: %u < %u\n",
dev->d_len, hdrlen);
}
else
{
/* Convert the outgoing packet into a frame list. */
buf = (FAR uint8_t *)ipv6 + hdrlen;
buflen = dev->d_len - hdrlen;
sixlowpan_queue_frames(
Squashed commit of the following: commit 2a3ab1652a2c95bcfc8be8380fc7cbdcb6472938 Author: Gregory Nutt <gnutt@nuttx.org> Date: Sat Aug 19 08:44:31 2017 -0600 PF_IEEE802154: Finish some missing bind() logic. Add configs/sim configuration for testing. commit 59be4b846a6e3bfe82087a888e3fdac9c3c414e5 Author: Gregory Nutt <gnutt@nuttx.org> Date: Fri Aug 18 19:30:04 2017 -0600 PF_IEEE802154: More renaming to decouple 6LoPAN from radios in general. commit 69fabb1aea76e54381bdc13de28a3f1441fb42f4 Author: Gregory Nutt <gnutt@nuttx.org> Date: Fri Aug 18 19:21:11 2017 -0600 PF_IEEE802154: Missed a few renamings. commit ff0af1bb25567720934cc1c2a721ccd92cc35f89 Author: Gregory Nutt <gnutt@nuttx.org> Date: Fri Aug 18 17:46:58 2017 -0600 PF_IEEE802154: A few bugfixes commit 01c7c84afd00cf907d280d30cfaf0fb2cf90e02e Author: Gregory Nutt <gnutt@nuttx.org> Date: Fri Aug 18 17:01:31 2017 -0600 PF_IEEE802154: A few bugfixes commit dcef4056d1c1488c93151135f3b7106977faa903 Author: Gregory Nutt <gnutt@nuttx.org> Date: Fri Aug 18 16:31:05 2017 -0600 PF_IEEE802154: Bring in framework for sendto/recvfrom. Currently just a crude port of functions from net/pkt and do not provide the implemenation needed. commit 68c5b7b6dd3ab7eb2d0c19890abb38e6561b140e Author: Gregory Nutt <gnutt@nuttx.org> Date: Fri Aug 18 15:18:31 2017 -0600 Trivial fix to typo in comment commit fd0af534c089569ccdbd59f13b85453de0a653ad Author: Gregory Nutt <gnutt@nuttx.org> Date: Fri Aug 18 15:07:20 2017 -0600 PF_IEEE802154: Add device lookup logic; Rename some things that used to be used only by 6LoWPAN but now must be shared with PF_IEEE802154 and need more generic naming. commit 4fc80a1659f1c699b050775cefc7f6b631b46114 Author: Gregory Nutt <gnutt@nuttx.org> Date: Fri Aug 18 13:49:54 2017 -0600 PF_IEEE802154: Add driver poll logic. commit d83f71992df8764faa93f9425f1a7602a758f730 Author: Gregory Nutt <gnutt@nuttx.org> Date: Fri Aug 18 13:28:59 2017 -0600 PF_IEEE802154: Add frame input function. commit 77561b8c4d5d7be1f8d8eb62cf1a07229afe2048 Author: Gregory Nutt <gnutt@nuttx.org> Date: Fri Aug 18 12:46:29 2017 -0600 PF_IEEE802154: Socket type should be SOCK_DGRAM. Hook in socket interface. commit c0f90350282e9905d7f26a1b30f04cc6d6794648 Merge: 8b518abfd0 169c55e546 Author: Gregory Nutt <gnutt@nuttx.org> Date: Fri Aug 18 09:36:32 2017 -0600 Merge remote-tracking branch 'origin/master' into pf_ieee802154 commit 8b518abfd07d492f5148f2c5fdf65604de9822da Author: Gregory Nutt <gnutt@nuttx.org> Date: Fri Aug 18 09:35:39 2017 -0600 PF_IEEE802154: Add initialization and connection management logic. commit 98b62620b3cb420041d8ad14204f9410a8aace8c Author: Gregory Nutt <gnutt@nuttx.org> Date: Fri Aug 18 07:52:51 2017 -0600 PF_IEEE802154: Add basic build support and socket interface framework.
2017-08-19 16:48:52 +02:00
(FAR struct radio_driver_s *)fwddev,
&ipv6udp->ipv6, buf, buflen, &destmac);
}
}
}
drop:
dev->d_len = 0;
}
#endif
2017-03-30 02:07:52 +02:00
#endif /* CONFIG_NET_6LOWPAN && CONFIG_NET_UDP */