nuttx/drivers/serial/Kconfig-lpuart

#
# For a description of the syntax of this configuration file,
# see the file kconfig-language.txt in the NuttX tools repository.
#

config LPUART_SERIALDRIVER
	bool
	default n
	select MCU_SERIAL

config LPUART0_SERIALDRIVER
	bool
	default n
	select MCU_SERIAL

config LPUART1_SERIALDRIVER
	bool
	default n
	select MCU_SERIAL

config LPUART2_SERIALDRIVER
	bool
	default n
	select MCU_SERIAL

config LPUART3_SERIALDRIVER
	bool
	default n
	select MCU_SERIAL

config LPUART4_SERIALDRIVER
	bool
	default n
	select MCU_SERIAL

config LPUART5_SERIALDRIVER
	bool
	default n
	select MCU_SERIAL

config LPUART6_SERIALDRIVER
	bool
	default n
	select MCU_SERIAL

config LPUART7_SERIALDRIVER
	bool
	default n
	select MCU_SERIAL

config LPUART8_SERIALDRIVER
	bool
	default n
	select MCU_SERIAL

#####################################################################################

menu "LPUART0 Configuration"
	depends on LPUART0_SERIALDRIVER

config LPUART0_RXBUFSIZE
	int "Receive buffer size"
	default 256
	---help---
		Characters are buffered as they are received. This specifies
		the size of the receive buffer.

config LPUART0_TXBUFSIZE
	int "Transmit buffer size"
	default 256
	---help---
		Characters are buffered before being sent.  This specifies
		the size of the transmit buffer.

config LPUART0_BAUD
	int "BAUD rate"
	default 115200
	---help---
		The configured BAUD of the LPUART.

config LPUART0_BITS
	int "Character size"
	default 8
	---help---
		The number of bits.  Must be either 7 or 8.

config LPUART0_PARITY
	int "Parity setting"
	default 0
	range 0 2
	---help---
		0=no parity, 1=odd parity, 2=even parity

config LPUART0_2STOP
	int "Uses 2 stop bits"
	default 0
	---help---
		1=Two stop bits
choice
	prompt "IFLOW Control"
	default LPUART0_NOIFLOWCONTROL

config LPUART0_NOIFLOWCONTROL
	bool "No IFLOW control"
	---help---
		No IFLOW control

config LPUART0_RS485RTSCONTROL
	bool "RTS for RS485 Direction"
	select SERIAL_RS485CONTROL
	---help---
		 Use RTS pin for RS485 direction switching

config LPUART0_IFLOWCONTROL
	bool "RTS for IFLOW control"
	select SERIAL_IFLOWCONTROL
	---help---
		Enable RTS flow control
endchoice

config LPUART0_INVERTIFLOWCONTROL
	depends on LPUART0_RS485RTSCONTROL || LPUART0_IFLOWCONTROL
	bool "Invert sense of RTS bit"
	default n
	---help---
		Make RTS bit active high rather than active low

config LPUART0_OFLOWCONTROL
	depends on !LPUART0_RS485RTSCONTROL
	bool "CTS OFLOW control"
	default n
	select SERIAL_OFLOWCONTROL
	---help---
		Enable CTS flow control

config LPUART0_DMA
	bool "LPUART0 DMA support"
	default n
	select SERIAL_DMA
	---help---
		Enable DMA transfers

endmenu

#####################################################################################

menu "LPUART1 Configuration"
	depends on LPUART1_SERIALDRIVER

config LPUART1_RXBUFSIZE
	int "Receive buffer size"
	default 256
	---help---
		Characters are buffered as they are received. This specifies
		the size of the receive buffer.

config LPUART1_TXBUFSIZE
	int "Transmit buffer size"
	default 256
	---help---
		Characters are buffered before being sent.  This specifies
		the size of the transmit buffer.

config LPUART1_BAUD
	int "BAUD rate"
	default 115200
	---help---
		The configured BAUD of the LPUART.

config LPUART1_BITS
	int "Character size"
	default 8
	---help---
		The number of bits.  Must be either 7 or 8.

config LPUART1_PARITY
	int "Parity setting"
	default 0
	range 0 2
	---help---
		0=no parity, 1=odd parity, 2=even parity

config LPUART1_2STOP
	int "Uses 2 stop bits"
	default 0
	---help---
		1=Two stop bits
choice
	prompt "IFLOW Control"
	default LPUART1_NOIFLOWCONTROL

config LPUART1_NOIFLOWCONTROL
	bool "No IFLOW control"
	---help---
		No IFLOW control

config LPUART1_RS485RTSCONTROL
	bool "RTS for RS485 Direction"
	select SERIAL_RS485CONTROL
	---help---
		 Use RTS pin for RS485 direction switching

config LPUART1_IFLOWCONTROL
	bool "RTS for IFLOW control"
	select SERIAL_IFLOWCONTROL
	---help---
		Enable RTS flow control
endchoice

config LPUART1_INVERTIFLOWCONTROL
	depends on LPUART1_RS485RTSCONTROL || LPUART1_IFLOWCONTROL
	bool "Invert sense of RTS bit"
	default n
	---help---
		Make RTS bit active high rather than active low

config LPUART1_OFLOWCONTROL
	depends on !LPUART1_RS485RTSCONTROL
	bool "CTS OFLOW control"
	default n
	select SERIAL_OFLOWCONTROL
	---help---
		Enable CTS flow control

config LPUART1_DMA
	bool "LPUART1 DMA support"
	default n
	select SERIAL_DMA
	---help---
		Enable DMA transfers

endmenu

#####################################################################################

#####################################################################################

menu "LPUART2 Configuration"
	depends on LPUART2_SERIALDRIVER

config LPUART2_RXBUFSIZE
	int "Receive buffer size"
	default 256
	---help---
		Characters are buffered as they are received. This specifies
		the size of the receive buffer.

config LPUART2_TXBUFSIZE
	int "Transmit buffer size"
	default 256
	---help---
		Characters are buffered before being sent.  This specifies
		the size of the transmit buffer.

config LPUART2_BAUD
	int "BAUD rate"
	default 115200
	---help---
		The configured BAUD of the LPUART.

config LPUART2_BITS
	int "Character size"
	default 8
	---help---
		The number of bits.  Must be either 7 or 8.

config LPUART2_PARITY
	int "Parity setting"
	default 0
	range 0 2
	---help---
		0=no parity, 1=odd parity, 2=even parity

config LPUART2_2STOP
	int "Uses 2 stop bits"
	default 0
	---help---
		1=Two stop bits
choice
	prompt "IFLOW Control"
	default LPUART2_NOIFLOWCONTROL

config LPUART2_NOIFLOWCONTROL
	bool "No IFLOW control"
	---help---
		No IFLOW control

config LPUART2_RS485RTSCONTROL
	bool "RTS for RS485 Direction"
	select SERIAL_RS485CONTROL
	---help---
		 Use RTS pin for RS485 direction switching

config LPUART2_IFLOWCONTROL
	bool "RTS for IFLOW control"
	select SERIAL_IFLOWCONTROL
	---help---
		Enable RTS flow control
endchoice

config LPUART2_INVERTIFLOWCONTROL
	depends on LPUART2_RS485RTSCONTROL || LPUART2_IFLOWCONTROL
	bool "Invert sense of RTS bit"
	default n
	---help---
		Make RTS bit active high rather than active low

config LPUART2_OFLOWCONTROL
	depends on !LPUART2_RS485RTSCONTROL
	bool "CTS OFLOW control"
	default n
	select SERIAL_OFLOWCONTROL
	---help---
		Enable CTS flow control

config LPUART2_DMA
	bool "LPUART2 DMA support"
	default n
	select SERIAL_DMA
	---help---
		Enable DMA transfers

endmenu

#####################################################################################

menu "LPUART3 Configuration"
	depends on LPUART3_SERIALDRIVER

config LPUART3_RXBUFSIZE
	int "Receive buffer size"
	default 256
	---help---
		Characters are buffered as they are received. This specifies
		the size of the receive buffer.

config LPUART3_TXBUFSIZE
	int "Transmit buffer size"
	default 256
	---help---
		Characters are buffered before being sent.  This specifies
		the size of the transmit buffer.

config LPUART3_BAUD
	int "BAUD rate"
	default 115200
	---help---
		The configured BAUD of the LPUART.

config LPUART3_BITS
	int "Character size"
	default 8
	---help---
		The number of bits.  Must be either 7 or 8.

config LPUART3_PARITY
	int "Parity setting"
	default 0
	range 0 2
	---help---
		0=no parity, 1=odd parity, 2=even parity

config LPUART3_2STOP
	int "Uses 2 stop bits"
	default 0
	---help---
		1=Two stop bits
choice
	prompt "IFLOW Control"
	default LPUART3_NOIFLOWCONTROL

config LPUART3_NOIFLOWCONTROL
	bool "No IFLOW control"
	---help---
		No IFLOW control

config LPUART3_RS485RTSCONTROL
	bool "RTS for RS485 Direction"
	select SERIAL_RS485CONTROL
	---help---
		 Use RTS pin for RS485 direction switching

config LPUART3_IFLOWCONTROL
	bool "RTS for IFLOW control"
	select SERIAL_IFLOWCONTROL
	---help---
		Enable RTS flow control
endchoice

config LPUART3_INVERTIFLOWCONTROL
	depends on LPUART3_RS485RTSCONTROL || LPUART3_IFLOWCONTROL
	bool "Invert sense of RTS bit"
	default n
	---help---
		Make RTS bit active high rather than active low

config LPUART3_OFLOWCONTROL
	depends on !LPUART3_RS485RTSCONTROL
	bool "CTS OFLOW control"
	default n
	select SERIAL_OFLOWCONTROL
	---help---
		Enable CTS flow control

config LPUART3_DMA
	bool "LPUART3 DMA support"
	default n
	select SERIAL_DMA
	---help---
		Enable DMA transfers

endmenu

#####################################################################################

menu "LPUART4 Configuration"
	depends on LPUART4_SERIALDRIVER

config LPUART4_RXBUFSIZE
	int "Receive buffer size"
	default 256
	---help---
		Characters are buffered as they are received. This specifies
		the size of the receive buffer.

config LPUART4_TXBUFSIZE
	int "Transmit buffer size"
	default 256
	---help---
		Characters are buffered before being sent.  This specifies
		the size of the transmit buffer.

config LPUART4_BAUD
	int "BAUD rate"
	default 115200
	---help---
		The configured BAUD of the LPUART.

config LPUART4_BITS
	int "Character size"
	default 8
	---help---
		The number of bits.  Must be either 7 or 8.

config LPUART4_PARITY
	int "Parity setting"
	default 0
	range 0 2
	---help---
		0=no parity, 1=odd parity, 2=even parity

config LPUART4_2STOP
	int "Uses 2 stop bits"
	default 0
	---help---
		1=Two stop bits
choice
	prompt "IFLOW Control"
	default LPUART4_NOIFLOWCONTROL

config LPUART4_NOIFLOWCONTROL
	bool "No IFLOW control"
	---help---
		No IFLOW control

config LPUART4_RS485RTSCONTROL
	bool "RTS for RS485 Direction"
	select SERIAL_RS485CONTROL
	---help---
		 Use RTS pin for RS485 direction switching

config LPUART4_IFLOWCONTROL
	bool "RTS for IFLOW control"
	select SERIAL_IFLOWCONTROL
	---help---
		Enable RTS flow control
endchoice

config LPUART4_INVERTIFLOWCONTROL
	depends on LPUART4_RS485RTSCONTROL || LPUART4_IFLOWCONTROL
	bool "Invert sense of RTS bit"
	default n
	---help---
		Make RTS bit active high rather than active low

config LPUART4_OFLOWCONTROL
	depends on !LPUART4_RS485RTSCONTROL
	bool "CTS OFLOW control"
	default n
	select SERIAL_OFLOWCONTROL
	---help---
		Enable CTS flow control

config LPUART4_DMA
	bool "LPUART4 DMA support"
	default n
	select SERIAL_DMA
	---help---
		Enable DMA transfers

endmenu

#####################################################################################

menu "LPUART5 Configuration"
	depends on LPUART5_SERIALDRIVER

config LPUART5_RXBUFSIZE
	int "Receive buffer size"
	default 256
	---help---
		Characters are buffered as they are received. This specifies
		the size of the receive buffer.

config LPUART5_TXBUFSIZE
	int "Transmit buffer size"
	default 256
	---help---
		Characters are buffered before being sent.  This specifies
		the size of the transmit buffer.

config LPUART5_BAUD
	int "BAUD rate"
	default 115200
	---help---
		The configured BAUD of the LPUART.

config LPUART5_BITS
	int "Character size"
	default 8
	---help---
		The number of bits.  Must be either 7 or 8.

config LPUART5_PARITY
	int "Parity setting"
	default 0
	range 0 2
	---help---
		0=no parity, 1=odd parity, 2=even parity

config LPUART5_2STOP
	int "Uses 2 stop bits"
	default 0
	---help---
		1=Two stop bits
choice
	prompt "IFLOW Control"
	default LPUART5_NOIFLOWCONTROL

config LPUART5_NOIFLOWCONTROL
	bool "No IFLOW control"
	---help---
		No IFLOW control

config LPUART5_RS485RTSCONTROL
	bool "RTS for RS485 Direction"
	select SERIAL_RS485CONTROL
	---help---
		 Use RTS pin for RS485 direction switching

config LPUART5_IFLOWCONTROL
	bool "RTS for IFLOW control"
	select SERIAL_IFLOWCONTROL
	---help---
		Enable RTS flow control
endchoice

config LPUART5_INVERTIFLOWCONTROL
	depends on LPUART5_RS485RTSCONTROL || LPUART5_IFLOWCONTROL
	bool "Invert sense of RTS bit"
	default n
	---help---
		Make RTS bit active high rather than active low

config LPUART5_OFLOWCONTROL
	depends on !LPUART5_RS485RTSCONTROL
	bool "CTS OFLOW control"
	default n
	select SERIAL_OFLOWCONTROL
	---help---
		Enable CTS flow control

config LPUART5_DMA
	bool "LPUART5 DMA support"
	default n
	select SERIAL_DMA
	---help---
		Enable DMA transfers

endmenu

#####################################################################################

menu "LPUART6 Configuration"
	depends on LPUART6_SERIALDRIVER

config LPUART6_RXBUFSIZE
	int "Receive buffer size"
	default 256
	---help---
		Characters are buffered as they are received. This specifies
		the size of the receive buffer.

config LPUART6_TXBUFSIZE
	int "Transmit buffer size"
	default 256
	---help---
		Characters are buffered before being sent.  This specifies
		the size of the transmit buffer.

config LPUART6_BAUD
	int "BAUD rate"
	default 115200
	---help---
		The configured BAUD of the LPUART.

config LPUART6_BITS
	int "Character size"
	default 8
	---help---
		The number of bits.  Must be either 7 or 8.

config LPUART6_PARITY
	int "Parity setting"
	default 0
	range 0 2
	---help---
		0=no parity, 1=odd parity, 2=even parity

config LPUART6_2STOP
	int "Uses 2 stop bits"
	default 0
	---help---
		1=Two stop bits
choice
	prompt "IFLOW Control"
	default LPUART6_NOIFLOWCONTROL

config LPUART6_NOIFLOWCONTROL
	bool "No IFLOW control"
	---help---
		No IFLOW control

config LPUART6_RS485RTSCONTROL
	bool "RTS for RS485 Direction"
	select SERIAL_RS485CONTROL
	---help---
		 Use RTS pin for RS485 direction switching

config LPUART6_IFLOWCONTROL
	bool "RTS for IFLOW control"
	select SERIAL_IFLOWCONTROL
	---help---
		Enable RTS flow control
endchoice

config LPUART6_INVERTIFLOWCONTROL
	depends on LPUART6_RS485RTSCONTROL || LPUART6_IFLOWCONTROL
	bool "Invert sense of RTS bit"
	default n
	---help---
		Make RTS bit active high rather than active low

config LPUART6_OFLOWCONTROL
	depends on !LPUART6_RS485RTSCONTROL
	bool "CTS OFLOW control"
	default n
	select SERIAL_OFLOWCONTROL
	---help---
		Enable CTS flow control

config LPUART6_DMA
	bool "LPUART6 DMA support"
	default n
	select SERIAL_DMA
	---help---
		Enable DMA transfers

endmenu

#####################################################################################

menu "LPUART7 Configuration"
	depends on LPUART7_SERIALDRIVER

config LPUART7_RXBUFSIZE
	int "Receive buffer size"
	default 256
	---help---
		Characters are buffered as they are received. This specifies
		the size of the receive buffer.

config LPUART7_TXBUFSIZE
	int "Transmit buffer size"
	default 256
	---help---
		Characters are buffered before being sent.  This specifies
		the size of the transmit buffer.

config LPUART7_BAUD
	int "BAUD rate"
	default 115200
	---help---
		The configured BAUD of the LPUART.

config LPUART7_BITS
	int "Character size"
	default 8
	---help---
		The number of bits.  Must be either 7 or 8.

config LPUART7_PARITY
	int "Parity setting"
	default 0
	range 0 2
	---help---
		0=no parity, 1=odd parity, 2=even parity

config LPUART7_2STOP
	int "Uses 2 stop bits"
	default 0
	---help---
		1=Two stop bits
choice
	prompt "IFLOW Control"
	default LPUART7_NOIFLOWCONTROL

config LPUART7_NOIFLOWCONTROL
	bool "No IFLOW control"
	---help---
		No IFLOW control

config LPUART7_RS485RTSCONTROL
	bool "RTS for RS485 Direction"
	select SERIAL_RS485CONTROL
	---help---
		 Use RTS pin for RS485 direction switching

config LPUART7_IFLOWCONTROL
	bool "RTS for IFLOW control"
	select SERIAL_IFLOWCONTROL
	---help---
		Enable RTS flow control
endchoice

config LPUART7_INVERTIFLOWCONTROL
	depends on LPUART7_RS485RTSCONTROL || LPUART7_IFLOWCONTROL
	bool "Invert sense of RTS bit"
	default n
	---help---
		Make RTS bit active high rather than active low

config LPUART7_OFLOWCONTROL
	depends on !LPUART7_RS485RTSCONTROL
	bool "CTS OFLOW control"
	default n
	select SERIAL_OFLOWCONTROL
	---help---
		Enable CTS flow control

config LPUART7_DMA
	bool "LPUART7 DMA support"
	default n
	select SERIAL_DMA
	---help---
		Enable DMA transfers

endmenu

#####################################################################################

menu "LPUART8 Configuration"
	depends on LPUART8_SERIALDRIVER

config LPUART8_RXBUFSIZE
	int "Receive buffer size"
	default 256
	---help---
		Characters are buffered as they are received. This specifies
		the size of the receive buffer.

config LPUART8_TXBUFSIZE
	int "Transmit buffer size"
	default 256
	---help---
		Characters are buffered before being sent.  This specifies
		the size of the transmit buffer.

config LPUART8_BAUD
	int "BAUD rate"
	default 115200
	---help---
		The configured BAUD of the LPUART.

config LPUART8_BITS
	int "Character size"
	default 8
	---help---
		The number of bits.  Must be either 7 or 8.

config LPUART8_PARITY
	int "Parity setting"
	default 0
	range 0 2
	---help---
		0=no parity, 1=odd parity, 2=even parity

config LPUART8_2STOP
	int "Uses 2 stop bits"
	default 0
	---help---
		1=Two stop bits
choice
	prompt "IFLOW Control"
	default LPUART8_NOIFLOWCONTROL

config LPUART8_NOIFLOWCONTROL
	bool "No IFLOW control"
	---help---
		No IFLOW control

config LPUART8_RS485RTSCONTROL
	bool "RTS for RS485 Direction"
	select SERIAL_RS485CONTROL
	---help---
		 Use RTS pin for RS485 direction switching

config LPUART8_IFLOWCONTROL
	bool "RTS for IFLOW control"
	select SERIAL_IFLOWCONTROL
	---help---
		Enable RTS flow control
endchoice

config LPUART8_INVERTIFLOWCONTROL
	depends on LPUART8_RS485RTSCONTROL || LPUART8_IFLOWCONTROL
	bool "Invert sense of RTS bit"
	default n
	---help---
		Make RTS bit active high rather than active low

config LPUART8_OFLOWCONTROL
	depends on !LPUART8_RS485RTSCONTROL
	bool "CTS OFLOW control"
	default n
	select SERIAL_OFLOWCONTROL
	---help---
		Enable CTS flow control

config LPUART8_DMA
	bool "LPUART8 DMA support"
	default n
	select SERIAL_DMA
	---help---
		Enable DMA transfers

endmenu