nuttx/boards/arm/stm32f0l0g0/b-l072z-lrwan1/scripts/Make.defs

40 lines
1.8 KiB
Plaintext
Raw Normal View History

Brings in initial WIP support for the STML0. This initial commit is in pretty bad shape and, hence it it marked EXPERIMENTAL." Squashed commit of the following: arch/arm/src/stm32f0l0: Various changes for a clean compilation. Still does not compile correctly due to missing FLASH latency definitions. arch/arm/src/stm32f0l0/hardware: Add framework for the STM32 L0. Currently set to same as the STM32F0. arch/arm/src/stm32f0l0/hardware: Very fragmentary FLASH header register definitions for the STM32 L0. arch/arm/src/stm32f0l0: Bring in DMA v1. Cannot possibly be functionaly yet due to the limited number for M0 interrupts. arch/arm/src/stm32f0l0: Add STM32 F0/L0 LSE and backup power domain controls. arch/arm/src/stm32f0l0/hardware/stm32l0_pwr.h: Add STM32L0 PWR header file. arch/arm/include/stm32f0l0/chip.h: Clean up WIP chip header file. arch/arm/include/stm32f0l0/chip.h: WIP. arm/src/stm32f0l0: Resolve some small differences between F0 and L0 GPIO pin options. arch/arm/src/stm32f0l0: Better integrate STM32L0 header files. nuttx/arch/arm/include/stm32f0l0: Add STM32L0 IRQ number definition file. arch/arm/src/stm32f0l0: Add STM32L0 RCC driver. arch/arm/src/stm32f0l0/hardware: Adds basic STM32L0 header files. arch/arm/src/stm32f0l0: Add STM32L0 chip selections. configs/: Hook new STM32L0 boards into the configuration system. configs: nucleo boards use as default ST LINK MCO as clock input from MCU and for this HSEBYP must be enabled configs: add basic support for nucleo-l073rz configs: add basic support for b-l072z-lrwan1
2018-12-19 19:36:35 +01:00
############################################################################
# boards/arm/stm32f0l0g0/b-l072z-lrwan1/scripts/Make.defs
Brings in initial WIP support for the STML0. This initial commit is in pretty bad shape and, hence it it marked EXPERIMENTAL." Squashed commit of the following: arch/arm/src/stm32f0l0: Various changes for a clean compilation. Still does not compile correctly due to missing FLASH latency definitions. arch/arm/src/stm32f0l0/hardware: Add framework for the STM32 L0. Currently set to same as the STM32F0. arch/arm/src/stm32f0l0/hardware: Very fragmentary FLASH header register definitions for the STM32 L0. arch/arm/src/stm32f0l0: Bring in DMA v1. Cannot possibly be functionaly yet due to the limited number for M0 interrupts. arch/arm/src/stm32f0l0: Add STM32 F0/L0 LSE and backup power domain controls. arch/arm/src/stm32f0l0/hardware/stm32l0_pwr.h: Add STM32L0 PWR header file. arch/arm/include/stm32f0l0/chip.h: Clean up WIP chip header file. arch/arm/include/stm32f0l0/chip.h: WIP. arm/src/stm32f0l0: Resolve some small differences between F0 and L0 GPIO pin options. arch/arm/src/stm32f0l0: Better integrate STM32L0 header files. nuttx/arch/arm/include/stm32f0l0: Add STM32L0 IRQ number definition file. arch/arm/src/stm32f0l0: Add STM32L0 RCC driver. arch/arm/src/stm32f0l0/hardware: Adds basic STM32L0 header files. arch/arm/src/stm32f0l0: Add STM32L0 chip selections. configs/: Hook new STM32L0 boards into the configuration system. configs: nucleo boards use as default ST LINK MCO as clock input from MCU and for this HSEBYP must be enabled configs: add basic support for nucleo-l073rz configs: add basic support for b-l072z-lrwan1
2018-12-19 19:36:35 +01:00
#
# Licensed to the Apache Software Foundation (ASF) under one or more
# contributor license agreements. See the NOTICE file distributed with
# this work for additional information regarding copyright ownership. The
# ASF licenses this file to you under the Apache License, Version 2.0 (the
# "License"); you may not use this file except in compliance with the
# License. You may obtain a copy of the License at
Brings in initial WIP support for the STML0. This initial commit is in pretty bad shape and, hence it it marked EXPERIMENTAL." Squashed commit of the following: arch/arm/src/stm32f0l0: Various changes for a clean compilation. Still does not compile correctly due to missing FLASH latency definitions. arch/arm/src/stm32f0l0/hardware: Add framework for the STM32 L0. Currently set to same as the STM32F0. arch/arm/src/stm32f0l0/hardware: Very fragmentary FLASH header register definitions for the STM32 L0. arch/arm/src/stm32f0l0: Bring in DMA v1. Cannot possibly be functionaly yet due to the limited number for M0 interrupts. arch/arm/src/stm32f0l0: Add STM32 F0/L0 LSE and backup power domain controls. arch/arm/src/stm32f0l0/hardware/stm32l0_pwr.h: Add STM32L0 PWR header file. arch/arm/include/stm32f0l0/chip.h: Clean up WIP chip header file. arch/arm/include/stm32f0l0/chip.h: WIP. arm/src/stm32f0l0: Resolve some small differences between F0 and L0 GPIO pin options. arch/arm/src/stm32f0l0: Better integrate STM32L0 header files. nuttx/arch/arm/include/stm32f0l0: Add STM32L0 IRQ number definition file. arch/arm/src/stm32f0l0: Add STM32L0 RCC driver. arch/arm/src/stm32f0l0/hardware: Adds basic STM32L0 header files. arch/arm/src/stm32f0l0: Add STM32L0 chip selections. configs/: Hook new STM32L0 boards into the configuration system. configs: nucleo boards use as default ST LINK MCO as clock input from MCU and for this HSEBYP must be enabled configs: add basic support for nucleo-l073rz configs: add basic support for b-l072z-lrwan1
2018-12-19 19:36:35 +01:00
#
# http://www.apache.org/licenses/LICENSE-2.0
Brings in initial WIP support for the STML0. This initial commit is in pretty bad shape and, hence it it marked EXPERIMENTAL." Squashed commit of the following: arch/arm/src/stm32f0l0: Various changes for a clean compilation. Still does not compile correctly due to missing FLASH latency definitions. arch/arm/src/stm32f0l0/hardware: Add framework for the STM32 L0. Currently set to same as the STM32F0. arch/arm/src/stm32f0l0/hardware: Very fragmentary FLASH header register definitions for the STM32 L0. arch/arm/src/stm32f0l0: Bring in DMA v1. Cannot possibly be functionaly yet due to the limited number for M0 interrupts. arch/arm/src/stm32f0l0: Add STM32 F0/L0 LSE and backup power domain controls. arch/arm/src/stm32f0l0/hardware/stm32l0_pwr.h: Add STM32L0 PWR header file. arch/arm/include/stm32f0l0/chip.h: Clean up WIP chip header file. arch/arm/include/stm32f0l0/chip.h: WIP. arm/src/stm32f0l0: Resolve some small differences between F0 and L0 GPIO pin options. arch/arm/src/stm32f0l0: Better integrate STM32L0 header files. nuttx/arch/arm/include/stm32f0l0: Add STM32L0 IRQ number definition file. arch/arm/src/stm32f0l0: Add STM32L0 RCC driver. arch/arm/src/stm32f0l0/hardware: Adds basic STM32L0 header files. arch/arm/src/stm32f0l0: Add STM32L0 chip selections. configs/: Hook new STM32L0 boards into the configuration system. configs: nucleo boards use as default ST LINK MCO as clock input from MCU and for this HSEBYP must be enabled configs: add basic support for nucleo-l073rz configs: add basic support for b-l072z-lrwan1
2018-12-19 19:36:35 +01:00
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
# License for the specific language governing permissions and limitations
# under the License.
Brings in initial WIP support for the STML0. This initial commit is in pretty bad shape and, hence it it marked EXPERIMENTAL." Squashed commit of the following: arch/arm/src/stm32f0l0: Various changes for a clean compilation. Still does not compile correctly due to missing FLASH latency definitions. arch/arm/src/stm32f0l0/hardware: Add framework for the STM32 L0. Currently set to same as the STM32F0. arch/arm/src/stm32f0l0/hardware: Very fragmentary FLASH header register definitions for the STM32 L0. arch/arm/src/stm32f0l0: Bring in DMA v1. Cannot possibly be functionaly yet due to the limited number for M0 interrupts. arch/arm/src/stm32f0l0: Add STM32 F0/L0 LSE and backup power domain controls. arch/arm/src/stm32f0l0/hardware/stm32l0_pwr.h: Add STM32L0 PWR header file. arch/arm/include/stm32f0l0/chip.h: Clean up WIP chip header file. arch/arm/include/stm32f0l0/chip.h: WIP. arm/src/stm32f0l0: Resolve some small differences between F0 and L0 GPIO pin options. arch/arm/src/stm32f0l0: Better integrate STM32L0 header files. nuttx/arch/arm/include/stm32f0l0: Add STM32L0 IRQ number definition file. arch/arm/src/stm32f0l0: Add STM32L0 RCC driver. arch/arm/src/stm32f0l0/hardware: Adds basic STM32L0 header files. arch/arm/src/stm32f0l0: Add STM32L0 chip selections. configs/: Hook new STM32L0 boards into the configuration system. configs: nucleo boards use as default ST LINK MCO as clock input from MCU and for this HSEBYP must be enabled configs: add basic support for nucleo-l073rz configs: add basic support for b-l072z-lrwan1
2018-12-19 19:36:35 +01:00
#
############################################################################
include $(TOPDIR)/.config
include $(TOPDIR)/tools/Config.mk
include $(TOPDIR)/arch/arm/src/armv6-m/Toolchain.defs
Brings in initial WIP support for the STML0. This initial commit is in pretty bad shape and, hence it it marked EXPERIMENTAL." Squashed commit of the following: arch/arm/src/stm32f0l0: Various changes for a clean compilation. Still does not compile correctly due to missing FLASH latency definitions. arch/arm/src/stm32f0l0/hardware: Add framework for the STM32 L0. Currently set to same as the STM32F0. arch/arm/src/stm32f0l0/hardware: Very fragmentary FLASH header register definitions for the STM32 L0. arch/arm/src/stm32f0l0: Bring in DMA v1. Cannot possibly be functionaly yet due to the limited number for M0 interrupts. arch/arm/src/stm32f0l0: Add STM32 F0/L0 LSE and backup power domain controls. arch/arm/src/stm32f0l0/hardware/stm32l0_pwr.h: Add STM32L0 PWR header file. arch/arm/include/stm32f0l0/chip.h: Clean up WIP chip header file. arch/arm/include/stm32f0l0/chip.h: WIP. arm/src/stm32f0l0: Resolve some small differences between F0 and L0 GPIO pin options. arch/arm/src/stm32f0l0: Better integrate STM32L0 header files. nuttx/arch/arm/include/stm32f0l0: Add STM32L0 IRQ number definition file. arch/arm/src/stm32f0l0: Add STM32L0 RCC driver. arch/arm/src/stm32f0l0/hardware: Adds basic STM32L0 header files. arch/arm/src/stm32f0l0: Add STM32L0 chip selections. configs/: Hook new STM32L0 boards into the configuration system. configs: nucleo boards use as default ST LINK MCO as clock input from MCU and for this HSEBYP must be enabled configs: add basic support for nucleo-l073rz configs: add basic support for b-l072z-lrwan1
2018-12-19 19:36:35 +01:00
LDSCRIPT = ld.script
ARCHSCRIPT += $(BOARD_DIR)$(DELIM)scripts$(DELIM)$(LDSCRIPT)
Brings in initial WIP support for the STML0. This initial commit is in pretty bad shape and, hence it it marked EXPERIMENTAL." Squashed commit of the following: arch/arm/src/stm32f0l0: Various changes for a clean compilation. Still does not compile correctly due to missing FLASH latency definitions. arch/arm/src/stm32f0l0/hardware: Add framework for the STM32 L0. Currently set to same as the STM32F0. arch/arm/src/stm32f0l0/hardware: Very fragmentary FLASH header register definitions for the STM32 L0. arch/arm/src/stm32f0l0: Bring in DMA v1. Cannot possibly be functionaly yet due to the limited number for M0 interrupts. arch/arm/src/stm32f0l0: Add STM32 F0/L0 LSE and backup power domain controls. arch/arm/src/stm32f0l0/hardware/stm32l0_pwr.h: Add STM32L0 PWR header file. arch/arm/include/stm32f0l0/chip.h: Clean up WIP chip header file. arch/arm/include/stm32f0l0/chip.h: WIP. arm/src/stm32f0l0: Resolve some small differences between F0 and L0 GPIO pin options. arch/arm/src/stm32f0l0: Better integrate STM32L0 header files. nuttx/arch/arm/include/stm32f0l0: Add STM32L0 IRQ number definition file. arch/arm/src/stm32f0l0: Add STM32L0 RCC driver. arch/arm/src/stm32f0l0/hardware: Adds basic STM32L0 header files. arch/arm/src/stm32f0l0: Add STM32L0 chip selections. configs/: Hook new STM32L0 boards into the configuration system. configs: nucleo boards use as default ST LINK MCO as clock input from MCU and for this HSEBYP must be enabled configs: add basic support for nucleo-l073rz configs: add basic support for b-l072z-lrwan1
2018-12-19 19:36:35 +01:00
ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
CFLAGS := $(ARCHCFLAGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRAFLAGS)
Brings in initial WIP support for the STML0. This initial commit is in pretty bad shape and, hence it it marked EXPERIMENTAL." Squashed commit of the following: arch/arm/src/stm32f0l0: Various changes for a clean compilation. Still does not compile correctly due to missing FLASH latency definitions. arch/arm/src/stm32f0l0/hardware: Add framework for the STM32 L0. Currently set to same as the STM32F0. arch/arm/src/stm32f0l0/hardware: Very fragmentary FLASH header register definitions for the STM32 L0. arch/arm/src/stm32f0l0: Bring in DMA v1. Cannot possibly be functionaly yet due to the limited number for M0 interrupts. arch/arm/src/stm32f0l0: Add STM32 F0/L0 LSE and backup power domain controls. arch/arm/src/stm32f0l0/hardware/stm32l0_pwr.h: Add STM32L0 PWR header file. arch/arm/include/stm32f0l0/chip.h: Clean up WIP chip header file. arch/arm/include/stm32f0l0/chip.h: WIP. arm/src/stm32f0l0: Resolve some small differences between F0 and L0 GPIO pin options. arch/arm/src/stm32f0l0: Better integrate STM32L0 header files. nuttx/arch/arm/include/stm32f0l0: Add STM32L0 IRQ number definition file. arch/arm/src/stm32f0l0: Add STM32L0 RCC driver. arch/arm/src/stm32f0l0/hardware: Adds basic STM32L0 header files. arch/arm/src/stm32f0l0: Add STM32L0 chip selections. configs/: Hook new STM32L0 boards into the configuration system. configs: nucleo boards use as default ST LINK MCO as clock input from MCU and for this HSEBYP must be enabled configs: add basic support for nucleo-l073rz configs: add basic support for b-l072z-lrwan1
2018-12-19 19:36:35 +01:00
CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
CXXFLAGS := $(ARCHCXXFLAGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRAFLAGS)
Brings in initial WIP support for the STML0. This initial commit is in pretty bad shape and, hence it it marked EXPERIMENTAL." Squashed commit of the following: arch/arm/src/stm32f0l0: Various changes for a clean compilation. Still does not compile correctly due to missing FLASH latency definitions. arch/arm/src/stm32f0l0/hardware: Add framework for the STM32 L0. Currently set to same as the STM32F0. arch/arm/src/stm32f0l0/hardware: Very fragmentary FLASH header register definitions for the STM32 L0. arch/arm/src/stm32f0l0: Bring in DMA v1. Cannot possibly be functionaly yet due to the limited number for M0 interrupts. arch/arm/src/stm32f0l0: Add STM32 F0/L0 LSE and backup power domain controls. arch/arm/src/stm32f0l0/hardware/stm32l0_pwr.h: Add STM32L0 PWR header file. arch/arm/include/stm32f0l0/chip.h: Clean up WIP chip header file. arch/arm/include/stm32f0l0/chip.h: WIP. arm/src/stm32f0l0: Resolve some small differences between F0 and L0 GPIO pin options. arch/arm/src/stm32f0l0: Better integrate STM32L0 header files. nuttx/arch/arm/include/stm32f0l0: Add STM32L0 IRQ number definition file. arch/arm/src/stm32f0l0: Add STM32L0 RCC driver. arch/arm/src/stm32f0l0/hardware: Adds basic STM32L0 header files. arch/arm/src/stm32f0l0: Add STM32L0 chip selections. configs/: Hook new STM32L0 boards into the configuration system. configs: nucleo boards use as default ST LINK MCO as clock input from MCU and for this HSEBYP must be enabled configs: add basic support for nucleo-l073rz configs: add basic support for b-l072z-lrwan1
2018-12-19 19:36:35 +01:00
CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
make/expression: improving up asm/C/C++ compile times In the current compilation environment, the recursive assignment(=) for compile flags will be delayed until every file is actually need to be compile. For example: -------------------------------------------------------------------------------- arch/arm/src/Makefile: INCLUDES += ${shell $(INCDIR) "$(CC)" $(ARCH_SRCDIR)$(DELIM)chip} INCLUDES += ${shell $(INCDIR) "$(CC)" $(ARCH_SRCDIR)$(DELIM)common} INCLUDES += ${shell $(INCDIR) "$(CC)" $(ARCH_SRCDIR)$(DELIM)$(ARCH_SUBDIR)} INCLUDES += ${shell $(INCDIR) "$(CC)" $(TOPDIR)$(DELIM)sched} CPPFLAGS += $(INCLUDES) $(EXTRAFLAGS) CFLAGS += $(INCLUDES) $(EXTRAFLAGS) CXXFLAGS += $(INCLUDES) $(EXTRAFLAGS) AFLAGS += $(INCLUDES) $(EXTRAFLAGS) -------------------------------------------------------------------------------- All compilation options will be included recursively, which will be delayed until the compilation options are actually used: tools/Config.mk: -------------------------------------------------------------------------------- define COMPILE @echo "CC: $1" $(Q) $(CC) -c $(CFLAGS) $($(strip $1)_CFLAGS) $1 -o $2 endef -------------------------------------------------------------------------------- All compile flags to be reexecuted $(INCDIR) as long as one file needs to be compiled, but in fact, the compilation options have not changed in the current directory. So the we recommand to change the syntax of assignment From Recursive (=) To Simple (:=) In this way, we can ensure that all compilation options are expanded only once and reducing repeated works. Signed-off-by: chao.an <anchao@xiaomi.com>
2020-09-24 12:46:51 +02:00
CPPFLAGS := $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRAFLAGS)
AFLAGS := $(CFLAGS) -D__ASSEMBLY__
Brings in initial WIP support for the STML0. This initial commit is in pretty bad shape and, hence it it marked EXPERIMENTAL." Squashed commit of the following: arch/arm/src/stm32f0l0: Various changes for a clean compilation. Still does not compile correctly due to missing FLASH latency definitions. arch/arm/src/stm32f0l0/hardware: Add framework for the STM32 L0. Currently set to same as the STM32F0. arch/arm/src/stm32f0l0/hardware: Very fragmentary FLASH header register definitions for the STM32 L0. arch/arm/src/stm32f0l0: Bring in DMA v1. Cannot possibly be functionaly yet due to the limited number for M0 interrupts. arch/arm/src/stm32f0l0: Add STM32 F0/L0 LSE and backup power domain controls. arch/arm/src/stm32f0l0/hardware/stm32l0_pwr.h: Add STM32L0 PWR header file. arch/arm/include/stm32f0l0/chip.h: Clean up WIP chip header file. arch/arm/include/stm32f0l0/chip.h: WIP. arm/src/stm32f0l0: Resolve some small differences between F0 and L0 GPIO pin options. arch/arm/src/stm32f0l0: Better integrate STM32L0 header files. nuttx/arch/arm/include/stm32f0l0: Add STM32L0 IRQ number definition file. arch/arm/src/stm32f0l0: Add STM32L0 RCC driver. arch/arm/src/stm32f0l0/hardware: Adds basic STM32L0 header files. arch/arm/src/stm32f0l0: Add STM32L0 chip selections. configs/: Hook new STM32L0 boards into the configuration system. configs: nucleo boards use as default ST LINK MCO as clock input from MCU and for this HSEBYP must be enabled configs: add basic support for nucleo-l073rz configs: add basic support for b-l072z-lrwan1
2018-12-19 19:36:35 +01:00
NXFLATLDFLAGS1 = -r -d -warn-common
NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-pcrel.ld -no-check-sections
Brings in initial WIP support for the STML0. This initial commit is in pretty bad shape and, hence it it marked EXPERIMENTAL." Squashed commit of the following: arch/arm/src/stm32f0l0: Various changes for a clean compilation. Still does not compile correctly due to missing FLASH latency definitions. arch/arm/src/stm32f0l0/hardware: Add framework for the STM32 L0. Currently set to same as the STM32F0. arch/arm/src/stm32f0l0/hardware: Very fragmentary FLASH header register definitions for the STM32 L0. arch/arm/src/stm32f0l0: Bring in DMA v1. Cannot possibly be functionaly yet due to the limited number for M0 interrupts. arch/arm/src/stm32f0l0: Add STM32 F0/L0 LSE and backup power domain controls. arch/arm/src/stm32f0l0/hardware/stm32l0_pwr.h: Add STM32L0 PWR header file. arch/arm/include/stm32f0l0/chip.h: Clean up WIP chip header file. arch/arm/include/stm32f0l0/chip.h: WIP. arm/src/stm32f0l0: Resolve some small differences between F0 and L0 GPIO pin options. arch/arm/src/stm32f0l0: Better integrate STM32L0 header files. nuttx/arch/arm/include/stm32f0l0: Add STM32L0 IRQ number definition file. arch/arm/src/stm32f0l0: Add STM32L0 RCC driver. arch/arm/src/stm32f0l0/hardware: Adds basic STM32L0 header files. arch/arm/src/stm32f0l0: Add STM32L0 chip selections. configs/: Hook new STM32L0 boards into the configuration system. configs: nucleo boards use as default ST LINK MCO as clock input from MCU and for this HSEBYP must be enabled configs: add basic support for nucleo-l073rz configs: add basic support for b-l072z-lrwan1
2018-12-19 19:36:35 +01:00
LDNXFLATFLAGS = -e main -s 2048