2018-06-17 00:59:34 +02:00
|
|
|
/************************************************************************************
|
|
|
|
|
* arch/arm/include/stm32h7/chip.h
|
|
|
|
|
*
|
|
|
|
|
* Copyright (C) 2018 Gregory Nutt. All rights reserved.
|
|
|
|
|
* Authors: Gregory Nutt <gnutt@nuttx.org>
|
|
|
|
|
* Simon Laube <simon@leitwert.ch>
|
|
|
|
|
*
|
|
|
|
|
* Redistribution and use in source and binary forms, with or without
|
|
|
|
|
* modification, are permitted provided that the following conditions
|
|
|
|
|
* are met:
|
|
|
|
|
*
|
|
|
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
|
|
|
* notice, this list of conditions and the following disclaimer.
|
|
|
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
|
|
|
* notice, this list of conditions and the following disclaimer in
|
|
|
|
|
* the documentation and/or other materials provided with the
|
|
|
|
|
* distribution.
|
|
|
|
|
* 3. Neither the name NuttX nor the names of its contributors may be
|
|
|
|
|
* used to endorse or promote products derived from this software
|
|
|
|
|
* without specific prior written permission.
|
|
|
|
|
*
|
|
|
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
|
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
|
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
|
|
|
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
|
|
|
|
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
|
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
|
|
|
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
|
|
|
|
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
|
|
|
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
|
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
|
|
|
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
|
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
|
|
|
*
|
|
|
|
|
************************************************************************************/
|
|
|
|
|
|
|
|
|
|
#ifndef __ARCH_ARM_INCLUDE_STM32H7_CHIP_H
|
|
|
|
|
#define __ARCH_ARM_INCLUDE_STM32H7_CHIP_H
|
|
|
|
|
|
|
|
|
|
/************************************************************************************
|
|
|
|
|
* Included Files
|
|
|
|
|
************************************************************************************/
|
|
|
|
|
|
|
|
|
|
#include <nuttx/config.h>
|
|
|
|
|
|
|
|
|
|
/************************************************************************************
|
|
|
|
|
* Pre-processor Definitions
|
|
|
|
|
************************************************************************************/
|
|
|
|
|
|
|
|
|
|
/* STM32H7x3xx Differences between family members:
|
|
|
|
|
*
|
arch/stm32h7: Extend support to all STM32H7x3xx
All parts in the STM32H7x3xx family have the same pinmap, etc.,
so extending support to all members of the family required only
minimal changes: Adding them to Kconfig, extending some
preprocessor logic, and minor code changes.
arch/arm/src/stm32h7/Kconfig:
* Add explicit support for all microcontrollers in the
STM32H7x3xx family by adding support for:
- STM32H743AG
- STM32H743AI
- STM32H743BG
- STM32H743BI
- STM32H743IG
- STM32H743II
- STM32H743VG
- STM32H743VI
- STM32H743XG
- STM32H743XI
- STM32H743ZG
- STM32H753AI
- STM32H753BI
- STM32H753VI
- STM32H753XI
- STM32H753ZI
* Fix TODO items for IO_CONFIG (all STM32H7X3XX).
* Because 100-pin parts lack GPIO ports F and G, but have
port H, create the new hidden configs STM32H7_HAVE_GPIOF
and STM32H7_HAVE_GPIOG.
* STM32H7_STM32H7X3XX:
- Select STM32H7_HAVE_GPIOF and STM32H7_HAVE_GPIOG only
when not STM32H7_IO_CONFIG_V (100-pin part).
- STM32H7_STM32H7X3XX: select STM32H7_HAVE_SPI5 for all
IO configs except V (100-pin part), which doesn't expose
SPI5 due to pin count.
* STM32H7_STM32H7X7XX: Always select STM32H7_HAVE_GPIOF and
STM32H7_HAVE_GPIOG because we aren't adding more part
numbers in this family.
* Remove extraneous (duplicate) "bool" and "default n"
lines.
* config STM32H7_FMC: Fix indent (contents were indented
with spaces while rest of file uses tabs).
arch/arm/include/stm32h7/chip.h:
* Extend preprocessor logic to add support for the new
MCU part numbers.
* Expand table of differences between family members.
* Define STM32H7_NGPIO based on IO_CONFIGs decided in Kconfig.
* If IO config is not known, issue compile-time #error
with grep-friendly "CONFIG_STM32H7_IO_CONFIG_x Not Set."
Suggested by davids5.
arch/arm/src/stm32h7/hardware/stm32h7x3xx_gpio.h:
arch/arm/src/stm32h7/stm32h7x3xx_rcc.c:
arch/arm/src/stm32h7/stm32h7x7xx_rcc.c:
* When checking STM32H7_NGPIO > 5 or 6, check also
CONFIG_STM32H7_HAVE_GPIOF or CONFIG_STM32H7_HAVE_GPIOG.
arch/arm/src/stm32h7/stm32_gpio.c:
* stm32_configgpio(): When applicable, make sure we're not
trying to configure one of the missing ports.
* Fix nxstyle complains (wrong end of line comment position
and several long lines). No functional changes.
* g_gpiobase[]: Init base address for ports F and G according to
CONFIG_STM32H7_HAVE_GPIOF and CONFIG_STM32H7_HAVE_GPIOG.
* stm32_configgpio(): Replace complicated check with g_gpiobase[]
null check. Suggested by davids5.
* stm32_gpiowrite() and stm32_gpioread(): Add previously missing
null check of g_gpiobase[].
arch/arm/src/stm32h7/stm32_gpio.h:
* Wrap the defines GPIO_PORTA, GPIO_PORTB, GPIO_PORTC, GPIO_PORTD,
GPIO_PORTE, GPIO_PORTF, GPIO_PORTG, GPIO_PORTH, GPIO_PORTI,
GPIO_PORTJ, and GPIO_PORTK in conditional logic so that the
compiler will prevent use of ports that do not exist on the
target MCU.
* Fix nxstyle complaints.
Documentation/NuttX.html:
* Remove copy-and-pasted anchor for stm32f76xx77xx.
* Correct link to README.txt for Nucleo-H743ZI board,
formerly on BitBucket, now on GitHub.
* Add list item for STMicro STM32H747I-DISCO board.
Co-Authored-By: David Sidrane <David.Sidrane@Nscdg.com>
2020-04-07 00:10:56 +02:00
|
|
|
* ----------- ---------------- ----- ----
|
|
|
|
|
* SPI
|
|
|
|
|
* PART PACKAGE GPIOs I2S
|
|
|
|
|
* ----------- ---------------- ----- ----
|
|
|
|
|
* STM32H7x3Ax UFBGA169 132 6/3
|
|
|
|
|
* STM32H7x3Bx LQFP208 168 6/3
|
|
|
|
|
* STM32H7x3Ix LQFP176/UFBGA176 140 6/3
|
|
|
|
|
* STM32H7x3Vx LQFP100/TFBGA100 82 5/3
|
|
|
|
|
* STM32H7x3Xx TFBGA240 168 6/3
|
|
|
|
|
* STM32H7x3Zx LQFP144 114 6/3
|
|
|
|
|
* ----------- ---------------- ----- ----
|
2018-06-17 00:59:34 +02:00
|
|
|
*
|
arch/stm32h7: Extend support to all STM32H7x3xx
All parts in the STM32H7x3xx family have the same pinmap, etc.,
so extending support to all members of the family required only
minimal changes: Adding them to Kconfig, extending some
preprocessor logic, and minor code changes.
arch/arm/src/stm32h7/Kconfig:
* Add explicit support for all microcontrollers in the
STM32H7x3xx family by adding support for:
- STM32H743AG
- STM32H743AI
- STM32H743BG
- STM32H743BI
- STM32H743IG
- STM32H743II
- STM32H743VG
- STM32H743VI
- STM32H743XG
- STM32H743XI
- STM32H743ZG
- STM32H753AI
- STM32H753BI
- STM32H753VI
- STM32H753XI
- STM32H753ZI
* Fix TODO items for IO_CONFIG (all STM32H7X3XX).
* Because 100-pin parts lack GPIO ports F and G, but have
port H, create the new hidden configs STM32H7_HAVE_GPIOF
and STM32H7_HAVE_GPIOG.
* STM32H7_STM32H7X3XX:
- Select STM32H7_HAVE_GPIOF and STM32H7_HAVE_GPIOG only
when not STM32H7_IO_CONFIG_V (100-pin part).
- STM32H7_STM32H7X3XX: select STM32H7_HAVE_SPI5 for all
IO configs except V (100-pin part), which doesn't expose
SPI5 due to pin count.
* STM32H7_STM32H7X7XX: Always select STM32H7_HAVE_GPIOF and
STM32H7_HAVE_GPIOG because we aren't adding more part
numbers in this family.
* Remove extraneous (duplicate) "bool" and "default n"
lines.
* config STM32H7_FMC: Fix indent (contents were indented
with spaces while rest of file uses tabs).
arch/arm/include/stm32h7/chip.h:
* Extend preprocessor logic to add support for the new
MCU part numbers.
* Expand table of differences between family members.
* Define STM32H7_NGPIO based on IO_CONFIGs decided in Kconfig.
* If IO config is not known, issue compile-time #error
with grep-friendly "CONFIG_STM32H7_IO_CONFIG_x Not Set."
Suggested by davids5.
arch/arm/src/stm32h7/hardware/stm32h7x3xx_gpio.h:
arch/arm/src/stm32h7/stm32h7x3xx_rcc.c:
arch/arm/src/stm32h7/stm32h7x7xx_rcc.c:
* When checking STM32H7_NGPIO > 5 or 6, check also
CONFIG_STM32H7_HAVE_GPIOF or CONFIG_STM32H7_HAVE_GPIOG.
arch/arm/src/stm32h7/stm32_gpio.c:
* stm32_configgpio(): When applicable, make sure we're not
trying to configure one of the missing ports.
* Fix nxstyle complains (wrong end of line comment position
and several long lines). No functional changes.
* g_gpiobase[]: Init base address for ports F and G according to
CONFIG_STM32H7_HAVE_GPIOF and CONFIG_STM32H7_HAVE_GPIOG.
* stm32_configgpio(): Replace complicated check with g_gpiobase[]
null check. Suggested by davids5.
* stm32_gpiowrite() and stm32_gpioread(): Add previously missing
null check of g_gpiobase[].
arch/arm/src/stm32h7/stm32_gpio.h:
* Wrap the defines GPIO_PORTA, GPIO_PORTB, GPIO_PORTC, GPIO_PORTD,
GPIO_PORTE, GPIO_PORTF, GPIO_PORTG, GPIO_PORTH, GPIO_PORTI,
GPIO_PORTJ, and GPIO_PORTK in conditional logic so that the
compiler will prevent use of ports that do not exist on the
target MCU.
* Fix nxstyle complaints.
Documentation/NuttX.html:
* Remove copy-and-pasted anchor for stm32f76xx77xx.
* Correct link to README.txt for Nucleo-H743ZI board,
formerly on BitBucket, now on GitHub.
* Add list item for STMicro STM32H747I-DISCO board.
Co-Authored-By: David Sidrane <David.Sidrane@Nscdg.com>
2020-04-07 00:10:56 +02:00
|
|
|
* Parts STM32H7xxxG have 1024Kb of FLASH
|
2018-06-17 00:59:34 +02:00
|
|
|
*
|
|
|
|
|
* Parts STM32H7xxxI have 2048Kb of FLASH
|
|
|
|
|
*
|
|
|
|
|
* The correct FLASH size will be set CONFIG_STM32H7_FLASH_CONFIG_x or overridden
|
|
|
|
|
* with CONFIG_STM32H7_FLASH_OVERRIDE_x
|
|
|
|
|
*/
|
|
|
|
|
|
arch/stm32h7: Extend support to all STM32H7x3xx
All parts in the STM32H7x3xx family have the same pinmap, etc.,
so extending support to all members of the family required only
minimal changes: Adding them to Kconfig, extending some
preprocessor logic, and minor code changes.
arch/arm/src/stm32h7/Kconfig:
* Add explicit support for all microcontrollers in the
STM32H7x3xx family by adding support for:
- STM32H743AG
- STM32H743AI
- STM32H743BG
- STM32H743BI
- STM32H743IG
- STM32H743II
- STM32H743VG
- STM32H743VI
- STM32H743XG
- STM32H743XI
- STM32H743ZG
- STM32H753AI
- STM32H753BI
- STM32H753VI
- STM32H753XI
- STM32H753ZI
* Fix TODO items for IO_CONFIG (all STM32H7X3XX).
* Because 100-pin parts lack GPIO ports F and G, but have
port H, create the new hidden configs STM32H7_HAVE_GPIOF
and STM32H7_HAVE_GPIOG.
* STM32H7_STM32H7X3XX:
- Select STM32H7_HAVE_GPIOF and STM32H7_HAVE_GPIOG only
when not STM32H7_IO_CONFIG_V (100-pin part).
- STM32H7_STM32H7X3XX: select STM32H7_HAVE_SPI5 for all
IO configs except V (100-pin part), which doesn't expose
SPI5 due to pin count.
* STM32H7_STM32H7X7XX: Always select STM32H7_HAVE_GPIOF and
STM32H7_HAVE_GPIOG because we aren't adding more part
numbers in this family.
* Remove extraneous (duplicate) "bool" and "default n"
lines.
* config STM32H7_FMC: Fix indent (contents were indented
with spaces while rest of file uses tabs).
arch/arm/include/stm32h7/chip.h:
* Extend preprocessor logic to add support for the new
MCU part numbers.
* Expand table of differences between family members.
* Define STM32H7_NGPIO based on IO_CONFIGs decided in Kconfig.
* If IO config is not known, issue compile-time #error
with grep-friendly "CONFIG_STM32H7_IO_CONFIG_x Not Set."
Suggested by davids5.
arch/arm/src/stm32h7/hardware/stm32h7x3xx_gpio.h:
arch/arm/src/stm32h7/stm32h7x3xx_rcc.c:
arch/arm/src/stm32h7/stm32h7x7xx_rcc.c:
* When checking STM32H7_NGPIO > 5 or 6, check also
CONFIG_STM32H7_HAVE_GPIOF or CONFIG_STM32H7_HAVE_GPIOG.
arch/arm/src/stm32h7/stm32_gpio.c:
* stm32_configgpio(): When applicable, make sure we're not
trying to configure one of the missing ports.
* Fix nxstyle complains (wrong end of line comment position
and several long lines). No functional changes.
* g_gpiobase[]: Init base address for ports F and G according to
CONFIG_STM32H7_HAVE_GPIOF and CONFIG_STM32H7_HAVE_GPIOG.
* stm32_configgpio(): Replace complicated check with g_gpiobase[]
null check. Suggested by davids5.
* stm32_gpiowrite() and stm32_gpioread(): Add previously missing
null check of g_gpiobase[].
arch/arm/src/stm32h7/stm32_gpio.h:
* Wrap the defines GPIO_PORTA, GPIO_PORTB, GPIO_PORTC, GPIO_PORTD,
GPIO_PORTE, GPIO_PORTF, GPIO_PORTG, GPIO_PORTH, GPIO_PORTI,
GPIO_PORTJ, and GPIO_PORTK in conditional logic so that the
compiler will prevent use of ports that do not exist on the
target MCU.
* Fix nxstyle complaints.
Documentation/NuttX.html:
* Remove copy-and-pasted anchor for stm32f76xx77xx.
* Correct link to README.txt for Nucleo-H743ZI board,
formerly on BitBucket, now on GitHub.
* Add list item for STMicro STM32H747I-DISCO board.
Co-Authored-By: David Sidrane <David.Sidrane@Nscdg.com>
2020-04-07 00:10:56 +02:00
|
|
|
#if defined (CONFIG_ARCH_CHIP_STM32H743AG) || \
|
|
|
|
|
defined (CONFIG_ARCH_CHIP_STM32H743AI) || \
|
|
|
|
|
defined (CONFIG_ARCH_CHIP_STM32H743BG) || \
|
|
|
|
|
defined (CONFIG_ARCH_CHIP_STM32H743BI) || \
|
|
|
|
|
defined (CONFIG_ARCH_CHIP_STM32H743IG) || \
|
|
|
|
|
defined (CONFIG_ARCH_CHIP_STM32H743II) || \
|
|
|
|
|
defined (CONFIG_ARCH_CHIP_STM32H743VG) || \
|
|
|
|
|
defined (CONFIG_ARCH_CHIP_STM32H743VI) || \
|
|
|
|
|
defined (CONFIG_ARCH_CHIP_STM32H743XG) || \
|
|
|
|
|
defined (CONFIG_ARCH_CHIP_STM32H743XI) || \
|
|
|
|
|
defined (CONFIG_ARCH_CHIP_STM32H743ZG) || \
|
|
|
|
|
defined (CONFIG_ARCH_CHIP_STM32H743ZI) || \
|
|
|
|
|
defined (CONFIG_ARCH_CHIP_STM32H753AI) || \
|
|
|
|
|
defined (CONFIG_ARCH_CHIP_STM32H753BI) || \
|
|
|
|
|
defined (CONFIG_ARCH_CHIP_STM32H753II) || \
|
|
|
|
|
defined (CONFIG_ARCH_CHIP_STM32H753VI) || \
|
|
|
|
|
defined (CONFIG_ARCH_CHIP_STM32H753XI) || \
|
|
|
|
|
defined (CONFIG_ARCH_CHIP_STM32H753ZI)
|
2019-11-18 21:03:38 +01:00
|
|
|
#elif defined(CONFIG_ARCH_CHIP_STM32H747XI)
|
2018-06-17 00:59:34 +02:00
|
|
|
#else
|
|
|
|
|
# error STM32 H7 chip not identified
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
/* Size SRAM */
|
|
|
|
|
|
|
|
|
|
#if defined(CONFIG_STM32H7_STM32H7X3XX)
|
|
|
|
|
/* Memory */
|
|
|
|
|
|
|
|
|
|
# define STM32H7_SRAM_SIZE (512*1024) /* 512Kb SRAM on AXI bus Matrix (D1) */
|
|
|
|
|
# define STM32H7_SRAM1_SIZE (128*1024) /* 128Kb SRAM1 on AHB bus Matrix (D2) */
|
|
|
|
|
# define STM32H7_SRAM2_SIZE (128*1024) /* 128Kb SRAM2 on AHB bus Matrix (D2) */
|
|
|
|
|
# define STM32H7_SRAM3_SIZE (32*1024) /* 32Kb SRAM3 on AHB bus Matrix (D2) */
|
|
|
|
|
# define STM32H7_SRAM123_SIZE (288*1024) /* 128Kb SRAM123 on AHB bus Matrix (D2) */
|
|
|
|
|
# define STM32H7_SRAM4_SIZE (64*1024) /* 64Kb SRAM2 on AHB bus Matrix (D3) */
|
|
|
|
|
# if defined(CONFIG_ARMV7M_HAVE_DTCM)
|
|
|
|
|
# define STM32H7_DTCM_SRAM_SIZE (128*1024) /* 128Kb DTCM SRAM on TCM interface */
|
|
|
|
|
# else
|
|
|
|
|
# define STM32H7_DTCM_SRAM_SIZE (0) /* No DTCM SRAM on TCM interface */
|
|
|
|
|
# endif
|
|
|
|
|
# if defined(CONFIG_ARMV7M_HAVE_ITCM)
|
|
|
|
|
# define STM32H7_ITCM_SRAM_SIZE (64*1024) /* 64b ITCM SRAM on TCM interface */
|
|
|
|
|
# else
|
|
|
|
|
# define STM32H7_ITCM_SRAM_SIZE (0) /* No ITCM SRAM on TCM interface */
|
|
|
|
|
# endif
|
|
|
|
|
|
|
|
|
|
/* Peripherals */
|
|
|
|
|
|
arch/stm32h7: Extend support to all STM32H7x3xx
All parts in the STM32H7x3xx family have the same pinmap, etc.,
so extending support to all members of the family required only
minimal changes: Adding them to Kconfig, extending some
preprocessor logic, and minor code changes.
arch/arm/src/stm32h7/Kconfig:
* Add explicit support for all microcontrollers in the
STM32H7x3xx family by adding support for:
- STM32H743AG
- STM32H743AI
- STM32H743BG
- STM32H743BI
- STM32H743IG
- STM32H743II
- STM32H743VG
- STM32H743VI
- STM32H743XG
- STM32H743XI
- STM32H743ZG
- STM32H753AI
- STM32H753BI
- STM32H753VI
- STM32H753XI
- STM32H753ZI
* Fix TODO items for IO_CONFIG (all STM32H7X3XX).
* Because 100-pin parts lack GPIO ports F and G, but have
port H, create the new hidden configs STM32H7_HAVE_GPIOF
and STM32H7_HAVE_GPIOG.
* STM32H7_STM32H7X3XX:
- Select STM32H7_HAVE_GPIOF and STM32H7_HAVE_GPIOG only
when not STM32H7_IO_CONFIG_V (100-pin part).
- STM32H7_STM32H7X3XX: select STM32H7_HAVE_SPI5 for all
IO configs except V (100-pin part), which doesn't expose
SPI5 due to pin count.
* STM32H7_STM32H7X7XX: Always select STM32H7_HAVE_GPIOF and
STM32H7_HAVE_GPIOG because we aren't adding more part
numbers in this family.
* Remove extraneous (duplicate) "bool" and "default n"
lines.
* config STM32H7_FMC: Fix indent (contents were indented
with spaces while rest of file uses tabs).
arch/arm/include/stm32h7/chip.h:
* Extend preprocessor logic to add support for the new
MCU part numbers.
* Expand table of differences between family members.
* Define STM32H7_NGPIO based on IO_CONFIGs decided in Kconfig.
* If IO config is not known, issue compile-time #error
with grep-friendly "CONFIG_STM32H7_IO_CONFIG_x Not Set."
Suggested by davids5.
arch/arm/src/stm32h7/hardware/stm32h7x3xx_gpio.h:
arch/arm/src/stm32h7/stm32h7x3xx_rcc.c:
arch/arm/src/stm32h7/stm32h7x7xx_rcc.c:
* When checking STM32H7_NGPIO > 5 or 6, check also
CONFIG_STM32H7_HAVE_GPIOF or CONFIG_STM32H7_HAVE_GPIOG.
arch/arm/src/stm32h7/stm32_gpio.c:
* stm32_configgpio(): When applicable, make sure we're not
trying to configure one of the missing ports.
* Fix nxstyle complains (wrong end of line comment position
and several long lines). No functional changes.
* g_gpiobase[]: Init base address for ports F and G according to
CONFIG_STM32H7_HAVE_GPIOF and CONFIG_STM32H7_HAVE_GPIOG.
* stm32_configgpio(): Replace complicated check with g_gpiobase[]
null check. Suggested by davids5.
* stm32_gpiowrite() and stm32_gpioread(): Add previously missing
null check of g_gpiobase[].
arch/arm/src/stm32h7/stm32_gpio.h:
* Wrap the defines GPIO_PORTA, GPIO_PORTB, GPIO_PORTC, GPIO_PORTD,
GPIO_PORTE, GPIO_PORTF, GPIO_PORTG, GPIO_PORTH, GPIO_PORTI,
GPIO_PORTJ, and GPIO_PORTK in conditional logic so that the
compiler will prevent use of ports that do not exist on the
target MCU.
* Fix nxstyle complaints.
Documentation/NuttX.html:
* Remove copy-and-pasted anchor for stm32f76xx77xx.
* Correct link to README.txt for Nucleo-H743ZI board,
formerly on BitBucket, now on GitHub.
* Add list item for STMicro STM32H747I-DISCO board.
Co-Authored-By: David Sidrane <David.Sidrane@Nscdg.com>
2020-04-07 00:10:56 +02:00
|
|
|
# if defined(CONFIG_STM32H7_IO_CONFIG_A)
|
|
|
|
|
# define STM32H7_NGPIO (10) /* GPIOA-GPIOJ */
|
|
|
|
|
# elif defined(CONFIG_STM32H7_IO_CONFIG_B)
|
|
|
|
|
# define STM32H7_NGPIO (11) /* GPIOA-GPIOK */
|
|
|
|
|
# elif defined(CONFIG_STM32H7_IO_CONFIG_I)
|
|
|
|
|
# define STM32H7_NGPIO (9) /* GPIOA-GPIOI */
|
|
|
|
|
# elif defined(CONFIG_STM32H7_IO_CONFIG_V)
|
|
|
|
|
# define STM32H7_NGPIO (8) /* GPIOA-GPIOH, missing GPIOF-GPIOG */
|
|
|
|
|
# elif defined(CONFIG_STM32H7_IO_CONFIG_X)
|
|
|
|
|
# define STM32H7_NGPIO (11) /* GPIOA-GPIOK */
|
|
|
|
|
# elif defined(CONFIG_STM32H7_IO_CONFIG_Z)
|
|
|
|
|
# define STM32H7_NGPIO (8) /* GPIOA-GPIOH */
|
|
|
|
|
# else
|
|
|
|
|
# error CONFIG_STM32H7_IO_CONFIG_x Not Set
|
|
|
|
|
# endif
|
|
|
|
|
|
2019-11-18 21:03:38 +01:00
|
|
|
# define STM32H7_NDMA (4) /* (4) DMA1, DMA2, BDMA and MDMA */
|
|
|
|
|
# define STM32H7_NADC (3) /* (3) ADC1-3*/
|
|
|
|
|
# define STM32H7_NDAC (2) /* (2) DAC1-2*/
|
|
|
|
|
# define STM32H7_NCMP (2) /* (2) ultra-low power comparators */
|
|
|
|
|
# define STM32H7_NPGA (2) /* (2) Operational amplifiers: OPAMP */
|
|
|
|
|
# define STM32H7_NDFSDM (1) /* (1) digital filters for sigma delta modulator */
|
|
|
|
|
# define STM32H7_NUSART (4) /* (4) USART1-3, 6 */
|
|
|
|
|
# define STM32H7_NSPI (6) /* (6) SPI1-6 */
|
|
|
|
|
# define STM32H7_NI2S (3) /* (3) I2S1-3 */
|
|
|
|
|
# define STM32H7_NUART (4) /* (4) UART4-5, 7-8 */
|
|
|
|
|
# define STM32H7_NI2C (4) /* (4) I2C1-4 */
|
|
|
|
|
# define STM32H7_NSAI (4) /* (4) SAI1-4*/
|
|
|
|
|
# define STM32H7_NCAN (2) /* (2) CAN1-2 */
|
|
|
|
|
# define STM32H7_NSDIO (2) /* (2) SDIO */
|
|
|
|
|
#elif defined(CONFIG_STM32H7_STM32H7X7XX)
|
|
|
|
|
/* Memory */
|
|
|
|
|
|
|
|
|
|
# define STM32H7_SRAM_SIZE (512*1024) /* 512Kb SRAM on AXI bus Matrix (D1) */
|
|
|
|
|
# define STM32H7_SRAM1_SIZE (128*1024) /* 128Kb SRAM1 on AHB bus Matrix (D2) */
|
|
|
|
|
# define STM32H7_SRAM2_SIZE (128*1024) /* 128Kb SRAM2 on AHB bus Matrix (D2) */
|
|
|
|
|
# define STM32H7_SRAM3_SIZE (32*1024) /* 32Kb SRAM3 on AHB bus Matrix (D2) */
|
|
|
|
|
# define STM32H7_SRAM123_SIZE (288*1024) /* 128Kb SRAM123 on AHB bus Matrix (D2) */
|
|
|
|
|
# define STM32H7_SRAM4_SIZE (64*1024) /* 64Kb SRAM2 on AHB bus Matrix (D3) */
|
|
|
|
|
# if defined(CONFIG_ARMV7M_HAVE_DTCM)
|
|
|
|
|
# define STM32H7_DTCM_SRAM_SIZE (128*1024) /* 128Kb DTCM SRAM on TCM interface */
|
|
|
|
|
# else
|
|
|
|
|
# define STM32H7_DTCM_SRAM_SIZE (0) /* No DTCM SRAM on TCM interface */
|
|
|
|
|
# endif
|
|
|
|
|
# if defined(CONFIG_ARMV7M_HAVE_ITCM)
|
|
|
|
|
# define STM32H7_ITCM_SRAM_SIZE (64*1024) /* 64b ITCM SRAM on TCM interface */
|
|
|
|
|
# else
|
|
|
|
|
# define STM32H7_ITCM_SRAM_SIZE (0) /* No ITCM SRAM on TCM interface */
|
|
|
|
|
# endif
|
|
|
|
|
|
|
|
|
|
/* Peripherals */
|
|
|
|
|
|
2018-06-17 00:59:34 +02:00
|
|
|
# define STM32H7_NGPIO (11) /* GPIOA-GPIOK */
|
2019-03-01 18:37:22 +01:00
|
|
|
# define STM32H7_NDMA (4) /* (4) DMA1, DMA2, BDMA and MDMA */
|
2018-09-16 17:58:25 +02:00
|
|
|
# define STM32H7_NADC (3) /* (3) ADC1-3*/
|
|
|
|
|
# define STM32H7_NDAC (2) /* (2) DAC1-2*/
|
|
|
|
|
# define STM32H7_NCMP (2) /* (2) ultra-low power comparators */
|
|
|
|
|
# define STM32H7_NPGA (2) /* (2) Operational amplifiers: OPAMP */
|
|
|
|
|
# define STM32H7_NDFSDM (1) /* (1) digital filters for sigma delta modulator */
|
|
|
|
|
# define STM32H7_NUSART (4) /* (4) USART1-3, 6 */
|
|
|
|
|
# define STM32H7_NSPI (6) /* (6) SPI1-6 */
|
|
|
|
|
# define STM32H7_NI2S (3) /* (3) I2S1-3 */
|
|
|
|
|
# define STM32H7_NUART (4) /* (4) UART4-5, 7-8 */
|
|
|
|
|
# define STM32H7_NI2C (4) /* (4) I2C1-4 */
|
|
|
|
|
# define STM32H7_NSAI (4) /* (4) SAI1-4*/
|
|
|
|
|
# define STM32H7_NCAN (2) /* (2) CAN1-2 */
|
|
|
|
|
# define STM32H7_NSDIO (2) /* (2) SDIO */
|
2018-06-17 00:59:34 +02:00
|
|
|
#else
|
|
|
|
|
# error STM32 H7 chip Family not identified
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
/* TBD FPU Configuration */
|
|
|
|
|
|
|
|
|
|
#if defined(CONFIG_ARCH_HAVE_FPU)
|
|
|
|
|
#else
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#if defined(CONFIG_ARCH_HAVE_DPFPU)
|
|
|
|
|
#else
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
/* Diversification based on Family and package */
|
|
|
|
|
|
2019-04-30 16:43:39 +02:00
|
|
|
#if defined(CONFIG_STM32H7_HAVE_ETHERNET)
|
|
|
|
|
# define STM32H7_NETHERNET 1 /* 100/100 Ethernet MAC */
|
|
|
|
|
#else
|
|
|
|
|
# define STM32H7_NETHERNET 0 /* No 100/100 Ethernet MAC */
|
|
|
|
|
#endif
|
|
|
|
|
|
2020-01-02 16:17:16 +01:00
|
|
|
#if defined(CONFIG_STM32H7_HAVE_FMC)
|
|
|
|
|
# define STM32H7_NFMC 1 /* Have FMC memory controller */
|
2019-04-30 16:43:39 +02:00
|
|
|
#else
|
2020-01-02 16:17:16 +01:00
|
|
|
# define STM32H7_NFMC 0 /* No FMC memory controller */
|
2019-04-30 16:43:39 +02:00
|
|
|
#endif
|
|
|
|
|
|
arch/stm32h7: Extend support to all STM32H7x3xx
All parts in the STM32H7x3xx family have the same pinmap, etc.,
so extending support to all members of the family required only
minimal changes: Adding them to Kconfig, extending some
preprocessor logic, and minor code changes.
arch/arm/src/stm32h7/Kconfig:
* Add explicit support for all microcontrollers in the
STM32H7x3xx family by adding support for:
- STM32H743AG
- STM32H743AI
- STM32H743BG
- STM32H743BI
- STM32H743IG
- STM32H743II
- STM32H743VG
- STM32H743VI
- STM32H743XG
- STM32H743XI
- STM32H743ZG
- STM32H753AI
- STM32H753BI
- STM32H753VI
- STM32H753XI
- STM32H753ZI
* Fix TODO items for IO_CONFIG (all STM32H7X3XX).
* Because 100-pin parts lack GPIO ports F and G, but have
port H, create the new hidden configs STM32H7_HAVE_GPIOF
and STM32H7_HAVE_GPIOG.
* STM32H7_STM32H7X3XX:
- Select STM32H7_HAVE_GPIOF and STM32H7_HAVE_GPIOG only
when not STM32H7_IO_CONFIG_V (100-pin part).
- STM32H7_STM32H7X3XX: select STM32H7_HAVE_SPI5 for all
IO configs except V (100-pin part), which doesn't expose
SPI5 due to pin count.
* STM32H7_STM32H7X7XX: Always select STM32H7_HAVE_GPIOF and
STM32H7_HAVE_GPIOG because we aren't adding more part
numbers in this family.
* Remove extraneous (duplicate) "bool" and "default n"
lines.
* config STM32H7_FMC: Fix indent (contents were indented
with spaces while rest of file uses tabs).
arch/arm/include/stm32h7/chip.h:
* Extend preprocessor logic to add support for the new
MCU part numbers.
* Expand table of differences between family members.
* Define STM32H7_NGPIO based on IO_CONFIGs decided in Kconfig.
* If IO config is not known, issue compile-time #error
with grep-friendly "CONFIG_STM32H7_IO_CONFIG_x Not Set."
Suggested by davids5.
arch/arm/src/stm32h7/hardware/stm32h7x3xx_gpio.h:
arch/arm/src/stm32h7/stm32h7x3xx_rcc.c:
arch/arm/src/stm32h7/stm32h7x7xx_rcc.c:
* When checking STM32H7_NGPIO > 5 or 6, check also
CONFIG_STM32H7_HAVE_GPIOF or CONFIG_STM32H7_HAVE_GPIOG.
arch/arm/src/stm32h7/stm32_gpio.c:
* stm32_configgpio(): When applicable, make sure we're not
trying to configure one of the missing ports.
* Fix nxstyle complains (wrong end of line comment position
and several long lines). No functional changes.
* g_gpiobase[]: Init base address for ports F and G according to
CONFIG_STM32H7_HAVE_GPIOF and CONFIG_STM32H7_HAVE_GPIOG.
* stm32_configgpio(): Replace complicated check with g_gpiobase[]
null check. Suggested by davids5.
* stm32_gpiowrite() and stm32_gpioread(): Add previously missing
null check of g_gpiobase[].
arch/arm/src/stm32h7/stm32_gpio.h:
* Wrap the defines GPIO_PORTA, GPIO_PORTB, GPIO_PORTC, GPIO_PORTD,
GPIO_PORTE, GPIO_PORTF, GPIO_PORTG, GPIO_PORTH, GPIO_PORTI,
GPIO_PORTJ, and GPIO_PORTK in conditional logic so that the
compiler will prevent use of ports that do not exist on the
target MCU.
* Fix nxstyle complaints.
Documentation/NuttX.html:
* Remove copy-and-pasted anchor for stm32f76xx77xx.
* Correct link to README.txt for Nucleo-H743ZI board,
formerly on BitBucket, now on GitHub.
* Add list item for STMicro STM32H747I-DISCO board.
Co-Authored-By: David Sidrane <David.Sidrane@Nscdg.com>
2020-04-07 00:10:56 +02:00
|
|
|
/* NVIC priority levels *************************************************************/
|
2020-01-02 16:17:16 +01:00
|
|
|
|
2018-06-17 00:59:34 +02:00
|
|
|
/* 16 Programmable interrupt levels */
|
|
|
|
|
|
|
|
|
|
#define NVIC_SYSH_PRIORITY_MIN 0xf0 /* All bits set in minimum priority */
|
|
|
|
|
#define NVIC_SYSH_PRIORITY_DEFAULT 0x80 /* Midpoint is the default */
|
|
|
|
|
#define NVIC_SYSH_PRIORITY_MAX 0x00 /* Zero is maximum priority */
|
|
|
|
|
#define NVIC_SYSH_PRIORITY_STEP 0x10 /* Four bits of interrupt priority used */
|
|
|
|
|
|
|
|
|
|
#endif /* __ARCH_ARM_INCLUDE_STM32H7_CHIP_H */
|
