sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
5d643b3bef
nuttx/boards/z80/ez80/z20x/configs/nsh/defconfig

54 lines
1.3 KiB
Plaintext
Raw Normal View History

boards/z80/ez80/z20x: Initial port to z20x board. The Z20X is a simple expandable DIY computing system, built around the eZ80 microprocessor. Reference: https://z20x.computer
2020-02-21 15:10:54 +01:00
#
# This file is autogenerated: PLEASE DO NOT EDIT IT.
#
# You can use "make menuconfig" to make any modifications to the installed .config file.
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
# modifications.
#
# CONFIG_MMCSD_HAVE_CARDDETECT is not set
# CONFIG_MMCSD_HAVE_WRITEPROTECT is not set
# CONFIG_MMCSD_MMCSUPPORT is not set
# CONFIG_SPI_CALLBACK is not set
CONFIG_ARCH="z80"
CONFIG_ARCH_BOARD="z20x"
CONFIG_ARCH_BOARD_Z20X=y
CONFIG_ARCH_CHIP="ez80"
CONFIG_ARCH_CHIP_EZ80=y
CONFIG_ARCH_CHIP_EZ80F92=y
CONFIG_ARCH_STACKDUMP=y
CONFIG_ARCH_Z80=y
CONFIG_BOARD_LOOPSPERMSEC=1250
CONFIG_BOOT_RUNFROMEXTSRAM=y
CONFIG_DISABLE_MQUEUE=y
CONFIG_EZ80_RTC=y
CONFIG_EZ80_SPI=y
CONFIG_EZ80_UART1=y
CONFIG_FAT_LCNAMES=y
CONFIG_FAT_LFN=y
CONFIG_FS_FAT=y
CONFIG_FS_PROCFS=y
CONFIG_HOST_WINDOWS=y
boards: move USERMAIN_XX out of INIT_ENTRYPOINT Signed-off-by: ligd <liguiding1@xiaomi.com>
2021-12-23 04:56:43 +01:00
CONFIG_INIT_ENTRYPOINT="nsh_main"
boards/z80/ez80/z20x: Initial port to z20x board. The Z20X is a simple expandable DIY computing system, built around the eZ80 microprocessor. Reference: https://z20x.computer
2020-02-21 15:10:54 +01:00
CONFIG_MMCSD=y
driver/mmcsd: add option to limit block count in multiple-block transfer mode. Signed-off-by: Xu Xingliang <xuxingliang@xiaomi.com>
2021-12-21 12:55:38 +01:00
CONFIG_MMCSD_MULTIBLOCK_LIMIT=1
boards/z80/ez80/z20x: Initial port to z20x board. The Z20X is a simple expandable DIY computing system, built around the eZ80 microprocessor. Reference: https://z20x.computer
2020-02-21 15:10:54 +01:00
CONFIG_NSH_ARCHINIT=y
CONFIG_NSH_DISABLE_IFUPDOWN=y
CONFIG_NSH_FILEIOSIZE=512
CONFIG_NSH_LINELEN=64
CONFIG_NSH_READLINE=y
CONFIG_PREALLOC_TIMERS=4
CONFIG_PTHREAD_STACK_DEFAULT=1024
CONFIG_RAM_SIZE=65536
CONFIG_RR_INTERVAL=200
CONFIG_RTC_ALARM=y
CONFIG_SCHED_HPWORK=y
CONFIG_SPI=y
arch/z80/src/ez80: Fix eZ80F92 Interrupt Controller The eZ80F92 interrupt controller is very different from the eZ80F91. The eZ80F91 has: 1. Four byte interrupt vectors 2. The vector base address register is 16-bit so the vector table can lie in RAM Whereas the eZ80F92 has: 1. Two byte interrupt vectors 2. An 8-bit vector base address This means that the vectors must lie in the first 16-bits of FLASH and there must be a "trampoline" to get to interrupt handlers outside of the first 64-Kb of FLASH.
2020-02-28 19:34:23 +01:00
CONFIG_START_DAY=20
CONFIG_START_MONTH=2
CONFIG_START_YEAR=2020
boards/z80/ez80/z20x: Initial port to z20x board. The Z20X is a simple expandable DIY computing system, built around the eZ80 microprocessor. Reference: https://z20x.computer
2020-02-21 15:10:54 +01:00
CONFIG_SYSTEM_NSH=y
CONFIG_UART1_BITS=0
CONFIG_UART1_RXBUFSIZE=192
CONFIG_UART1_SERIAL_CONSOLE=y
CONFIG_UART1_TXBUFSIZE=64
Reference in New Issue Copy Permalink