2019-08-13 18:08:49 +02:00
|
|
|
/****************************************************************************
|
|
|
|
|
* boards/arm/lpc17xx_40xx/zkit-arm-1769/include/board.h
|
2013-02-26 15:09:43 +01:00
|
|
|
*
|
2021-07-19 10:06:32 +02:00
|
|
|
* Licensed to the Apache Software Foundation (ASF) under one or more
|
|
|
|
|
* contributor license agreements. See the NOTICE file distributed with
|
|
|
|
|
* this work for additional information regarding copyright ownership. The
|
|
|
|
|
* ASF licenses this file to you under the Apache License, Version 2.0 (the
|
|
|
|
|
* "License"); you may not use this file except in compliance with the
|
|
|
|
|
* License. You may obtain a copy of the License at
|
2013-02-26 15:09:43 +01:00
|
|
|
*
|
2021-07-19 10:06:32 +02:00
|
|
|
* http://www.apache.org/licenses/LICENSE-2.0
|
2013-02-26 15:09:43 +01:00
|
|
|
*
|
2021-07-19 10:06:32 +02:00
|
|
|
* Unless required by applicable law or agreed to in writing, software
|
|
|
|
|
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
|
|
|
|
|
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
|
|
|
|
|
* License for the specific language governing permissions and limitations
|
|
|
|
|
* under the License.
|
2013-02-26 15:09:43 +01:00
|
|
|
*
|
2019-08-13 18:08:49 +02:00
|
|
|
****************************************************************************/
|
2013-02-26 15:09:43 +01:00
|
|
|
|
2019-08-13 18:08:49 +02:00
|
|
|
#ifndef __BOARDS_ARM_LPC17XX_40XX_ZKIT_ARM_1769_INCLUDE_BOARD_H
|
|
|
|
|
#define __BOARDS_ARM_LPC17XX_40XX_ZKIT_ARM_1769_INCLUDE_BOARD_H
|
2013-02-26 15:09:43 +01:00
|
|
|
|
2019-08-13 18:08:49 +02:00
|
|
|
/****************************************************************************
|
2013-02-26 15:09:43 +01:00
|
|
|
* Included Files
|
2019-08-13 18:08:49 +02:00
|
|
|
****************************************************************************/
|
2013-02-26 15:09:43 +01:00
|
|
|
|
|
|
|
|
#include <nuttx/config.h>
|
|
|
|
|
|
|
|
|
|
#include <stdbool.h>
|
|
|
|
|
|
2019-07-11 18:50:00 +02:00
|
|
|
#if defined(CONFIG_ARCH_IRQBUTTONS) && defined(CONFIG_LPC17_40_GPIOIRQ)
|
2013-02-26 15:09:43 +01:00
|
|
|
# include <nuttx/irq.h>
|
|
|
|
|
#endif
|
|
|
|
|
|
2019-08-13 18:08:49 +02:00
|
|
|
/****************************************************************************
|
2015-04-08 17:15:17 +02:00
|
|
|
* Pre-processor Definitions
|
2019-08-13 18:08:49 +02:00
|
|
|
****************************************************************************/
|
|
|
|
|
|
|
|
|
|
/* Clocking *****************************************************************/
|
|
|
|
|
|
|
|
|
|
/* NOTE: The following definitions require lpc17_40_syscon.h.
|
|
|
|
|
* It is not included here because the including C file may not have that
|
|
|
|
|
* file in its include path.
|
2013-02-26 15:09:43 +01:00
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#define BOARD_XTAL_FREQUENCY (12000000) /* XTAL oscillator frequency */
|
|
|
|
|
#define BOARD_OSCCLK_FREQUENCY BOARD_XTAL_FREQUENCY /* Main oscillator frequency */
|
|
|
|
|
#define BOARD_RTCCLK_FREQUENCY (32768) /* RTC oscillator frequency */
|
|
|
|
|
#define BOARD_INTRCOSC_FREQUENCY (4000000) /* Internal RC oscillator frequency */
|
|
|
|
|
|
|
|
|
|
/* This is the clock setup we configure for:
|
|
|
|
|
*
|
2021-04-06 12:13:09 +02:00
|
|
|
* SYSCLK = BOARD_OSCCLK_FREQUENCY = 12MHz ->
|
|
|
|
|
* Select Main oscillator for source
|
|
|
|
|
* PLL0CLK = (2 * 20 * SYSCLK) / 1 = 480MHz ->
|
|
|
|
|
* PLL0 multipler=20, pre-divider=1
|
|
|
|
|
* CCLCK = 480MHz / 6 = 80MHz -> CCLK divider = 6
|
2013-02-26 15:09:43 +01:00
|
|
|
*/
|
|
|
|
|
|
2019-07-11 18:50:00 +02:00
|
|
|
#define LPC17_40_CCLK 80000000 /* 80Mhz */
|
2013-02-26 15:09:43 +01:00
|
|
|
|
2019-08-13 18:08:49 +02:00
|
|
|
/* Select the main oscillator as the frequency source.
|
|
|
|
|
* SYSCLK is then the frequency of the main oscillator.
|
2013-02-26 15:09:43 +01:00
|
|
|
*/
|
|
|
|
|
|
2019-07-11 18:50:00 +02:00
|
|
|
#undef CONFIG_LPC17_40_MAINOSC
|
|
|
|
|
#define CONFIG_LPC17_40_MAINOSC 1
|
2013-02-26 15:09:43 +01:00
|
|
|
#define BOARD_SCS_VALUE SYSCON_SCS_OSCEN
|
|
|
|
|
|
2019-08-13 18:08:49 +02:00
|
|
|
/* Select the main oscillator and CCLK divider.
|
|
|
|
|
* The output of the divider is CCLK.
|
2013-02-26 15:09:43 +01:00
|
|
|
* The input to the divider (PLLCLK) will be determined by the PLL output.
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#define BOARD_CCLKCFG_DIVIDER 6
|
|
|
|
|
#define BOARD_CCLKCFG_VALUE ((BOARD_CCLKCFG_DIVIDER-1) << SYSCON_CCLKCFG_SHIFT)
|
|
|
|
|
|
2019-08-13 18:08:49 +02:00
|
|
|
/* PLL0.
|
|
|
|
|
* PLL0 is used to generate the CPU clock divider input (PLLCLK).
|
2013-02-26 15:09:43 +01:00
|
|
|
*
|
|
|
|
|
* Source clock: Main oscillator
|
|
|
|
|
* PLL0 Multiplier value (M): 20
|
|
|
|
|
* PLL0 Pre-divider value (N): 1
|
|
|
|
|
*
|
|
|
|
|
* PLL0CLK = (2 * 20 * SYSCLK) / 1 = 480MHz
|
|
|
|
|
*/
|
|
|
|
|
|
2019-07-11 18:50:00 +02:00
|
|
|
#undef CONFIG_LPC17_40_PLL0
|
|
|
|
|
#define CONFIG_LPC17_40_PLL0 1
|
2013-02-26 15:09:43 +01:00
|
|
|
#define BOARD_CLKSRCSEL_VALUE SYSCON_CLKSRCSEL_MAIN
|
|
|
|
|
|
|
|
|
|
#define BOARD_PLL0CFG_MSEL 20
|
|
|
|
|
#define BOARD_PLL0CFG_NSEL 1
|
|
|
|
|
#define BOARD_PLL0CFG_VALUE \
|
|
|
|
|
(((BOARD_PLL0CFG_MSEL-1) << SYSCON_PLL0CFG_MSEL_SHIFT) | \
|
|
|
|
|
((BOARD_PLL0CFG_NSEL-1) << SYSCON_PLL0CFG_NSEL_SHIFT))
|
|
|
|
|
|
|
|
|
|
/* PLL1 -- Not used. */
|
|
|
|
|
|
2019-07-11 18:50:00 +02:00
|
|
|
#undef CONFIG_LPC17_40_PLL1
|
2013-02-26 15:09:43 +01:00
|
|
|
#define BOARD_PLL1CFG_MSEL 36
|
|
|
|
|
#define BOARD_PLL1CFG_NSEL 1
|
|
|
|
|
#define BOARD_PLL1CFG_VALUE \
|
|
|
|
|
(((BOARD_PLL1CFG_MSEL-1) << SYSCON_PLL1CFG_MSEL_SHIFT) | \
|
|
|
|
|
((BOARD_PLL1CFG_NSEL-1) << SYSCON_PLL1CFG_NSEL_SHIFT))
|
|
|
|
|
|
2019-08-13 18:08:49 +02:00
|
|
|
/* USB divider.
|
|
|
|
|
* This divider is used when PLL1 is not enabled to get the USB clock
|
|
|
|
|
* from PLL0:
|
2013-02-26 15:09:43 +01:00
|
|
|
*
|
|
|
|
|
* USBCLK = PLL0CLK / 10 = 48MHz
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#define BOARD_USBCLKCFG_VALUE SYSCON_USBCLKCFG_DIV10
|
|
|
|
|
|
|
|
|
|
/* FLASH Configuration */
|
|
|
|
|
|
|
|
|
|
#undef CONFIG_LP17_FLASH
|
|
|
|
|
#define CONFIG_LP17_FLASH 1
|
|
|
|
|
#define BOARD_FLASHCFG_VALUE 0x0000303a
|
|
|
|
|
|
|
|
|
|
/* Ethernet configuration */
|
|
|
|
|
|
2021-04-06 12:13:09 +02:00
|
|
|
/* #define ETH_MCFG_CLKSEL_DIV ETH_MCFG_CLKSEL_DIV44 */
|
|
|
|
|
|
2013-02-26 15:09:43 +01:00
|
|
|
#define ETH_MCFG_CLKSEL_DIV ETH_MCFG_CLKSEL_DIV20
|
|
|
|
|
|
2019-08-13 18:08:49 +02:00
|
|
|
/* LED definitions **********************************************************/
|
|
|
|
|
|
2013-02-26 15:09:43 +01:00
|
|
|
/* If CONFIG_ARCH_LEDS is not defined, then the user can control the LEDs in
|
|
|
|
|
* any way. The following definitions are used to access individual LEDs.
|
|
|
|
|
*
|
|
|
|
|
* LED1 -- Connected to P0[19]
|
|
|
|
|
* LED2 -- Connected to P0[21]
|
|
|
|
|
*/
|
|
|
|
|
|
2015-11-01 17:53:34 +01:00
|
|
|
/* LED index values for use with board_userled() */
|
2013-02-26 15:09:43 +01:00
|
|
|
|
|
|
|
|
#define BOARD_LED1 0
|
|
|
|
|
#define BOARD_LED2 1
|
|
|
|
|
#define BOARD_NLEDS 2
|
|
|
|
|
|
2015-11-01 17:53:34 +01:00
|
|
|
/* LED bits for use with board_userled_all() */
|
2013-02-26 15:09:43 +01:00
|
|
|
|
|
|
|
|
#define BOARD_LED1_BIT (1 << BOARD_LED1)
|
|
|
|
|
#define BOARD_LED2_BIT (1 << BOARD_LED2)
|
|
|
|
|
|
|
|
|
|
/* If CONFIG_ARCH_LEDs is defined, then NuttX will control the 2 LEDs
|
|
|
|
|
* on board the ZKIT-ARM-1769. The following definitions
|
|
|
|
|
* describe how NuttX controls the LEDs:
|
|
|
|
|
*/
|
2013-09-23 15:47:56 +02:00
|
|
|
|
|
|
|
|
/* LED1 LED2 */
|
|
|
|
|
#define LED_STARTED 0 /* OFF OFF */
|
|
|
|
|
#define LED_HEAPALLOCATE 1 /* ON OFF */
|
|
|
|
|
#define LED_IRQSENABLED 2 /* OFF ON */
|
|
|
|
|
#define LED_STACKCREATED 3 /* OFF OFF */
|
|
|
|
|
|
|
|
|
|
/* After the system is booted, this logic will no longer use LED 1.
|
2019-07-11 18:50:00 +02:00
|
|
|
* LED 1 is available for use by application software using lpc17_40_led
|
2013-09-23 15:47:56 +02:00
|
|
|
* (prototyped below)
|
|
|
|
|
*/
|
2021-04-06 12:13:09 +02:00
|
|
|
|
2013-09-23 15:47:56 +02:00
|
|
|
/* LED1 LED2 */
|
|
|
|
|
#define LED_INIRQ 4 /* NC ON (momentary) */
|
|
|
|
|
#define LED_SIGNAL 5 /* NC ON (momentary) */
|
|
|
|
|
#define LED_ASSERTION 6 /* NC ON (momentary) */
|
|
|
|
|
#define LED_PANIC 7 /* NC ON (1Hz flashing) */
|
2013-02-26 15:09:43 +01:00
|
|
|
|
2019-08-13 18:08:49 +02:00
|
|
|
/* Button definitions *******************************************************/
|
|
|
|
|
|
|
|
|
|
/* The ZKIT-ARM-1769 supports several buttons.
|
|
|
|
|
* All will read "1" when open and "0" when closed
|
2013-02-26 15:09:43 +01:00
|
|
|
*
|
|
|
|
|
* KEY1 -- Connected to P1[19]
|
|
|
|
|
* KEY2 -- Connected to P1[27]
|
|
|
|
|
* KEY3 -- Connected to P1[28]
|
|
|
|
|
* KEY4 -- Connected to P1[31]
|
|
|
|
|
* KEY5 -- Connected to P2[13]
|
|
|
|
|
*
|
|
|
|
|
*/
|
2019-08-13 18:08:49 +02:00
|
|
|
|
2013-02-26 15:09:43 +01:00
|
|
|
#define BOARD_BUTTON_1 0
|
|
|
|
|
#define BOARD_BUTTON_2 1
|
|
|
|
|
#define BOARD_BUTTON_3 2
|
|
|
|
|
#define BOARD_BUTTON_4 3
|
|
|
|
|
#define BOARD_BUTTON_5 4
|
2017-12-16 20:00:06 +01:00
|
|
|
#define NUM_BUTTONS 5
|
2013-03-14 15:42:52 +01:00
|
|
|
|
2013-03-14 16:03:20 +01:00
|
|
|
#define BOARD_BUTTON1_BIT (1 << BOARD_BUTTON_1)
|
|
|
|
|
#define BOARD_BUTTON2_BIT (1 << BOARD_BUTTON_2)
|
|
|
|
|
#define BOARD_BUTTON3_BIT (1 << BOARD_BUTTON_3)
|
|
|
|
|
#define BOARD_BUTTON4_BIT (1 << BOARD_BUTTON_4)
|
|
|
|
|
#define BOARD_BUTTON5_BIT (1 << BOARD_BUTTON_5)
|
2013-02-26 15:09:43 +01:00
|
|
|
|
2019-08-13 18:08:49 +02:00
|
|
|
/* Alternate pin selections *************************************************/
|
|
|
|
|
|
2013-02-26 15:09:43 +01:00
|
|
|
/* Pin Description On Board Connector
|
|
|
|
|
* -------------------------------- ---------------- -------------
|
|
|
|
|
* P0.0/RD1/TXD3/SDA1 RD1 AUX-CON
|
|
|
|
|
* P0.1/TD1/RXD3/SCL1 TD1
|
|
|
|
|
* P0.2/TXD0/AD0.7 TXD0 COM0
|
|
|
|
|
* P0.3/RXD0/AD0.6 RXD0
|
|
|
|
|
* P0.4/I2SRX_CLK/RD2/CAP2.0 GPIO0
|
|
|
|
|
* P0.5/I2SRX_WS/TD2/CAP2.1 GPIO1
|
|
|
|
|
* P0.6/I2SRX_SDA/SSEL1/MAT2.0 SSEL1 SPI
|
|
|
|
|
* P0.7/I2STX_CLK/SCK1/MAT2.1 SCK1
|
|
|
|
|
* P0.8/I2STX_WS/MISO1/MAT2.2 MISO1
|
|
|
|
|
* P0.9/I2STX_SDA/MOSI1/MAT2.3 MOSI1
|
|
|
|
|
* P0.10/TXD2/SDA2/MAT3.0 TXD2 AUX-CON
|
|
|
|
|
* P0.11/RXD2/SCL2/MAT3.1 RXD2
|
|
|
|
|
* P0.15/TXD1/SCK0/SCK SD-SCK
|
|
|
|
|
* P0.16/RXD1/SSEL0/SSEL SD-SSEL SD-CARD
|
|
|
|
|
* P0.17/CTS1/MISO0/MISO SD-MISO
|
|
|
|
|
* P0.18/DCD1/M0SI0/MOSI SD-MOSI
|
|
|
|
|
* P0.19/DSR1/SDA1 LED1
|
|
|
|
|
* P0.20/DTR1/SCL1 DTR1 COM1
|
|
|
|
|
* P0.21/RI1/RD1 N.C LED2
|
|
|
|
|
* P0.22/RTS1/TD1 RTS1 COM1
|
|
|
|
|
* P0.23/AD0.0/I2SRX_CLK/CAP3.0 AD0
|
|
|
|
|
* P0.24/AD0.1/I2SRX_WS/CAP3.1 AD1 AIN
|
|
|
|
|
* P0.25/AD0.2/I2SRX_SDA/TXD3 AD2
|
|
|
|
|
* P0.26/AD0.3/AOUT/RXD3 AD3
|
|
|
|
|
* P0.27/SDA0/USB_SDA SDA0 I2C0
|
|
|
|
|
* P0.28/SCL0/USB_SCL SCL0
|
|
|
|
|
* P0.29/USB_D+ USB-D+ USB
|
|
|
|
|
* P0.30/USB_D- USB-D-
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#define GPIO_CAN1_RD GPIO_CAN1_RD_1
|
|
|
|
|
#define GPIO_CAN1_TD GPIO_CAN1_TD_1
|
2013-09-23 15:47:56 +02:00
|
|
|
#define GPIO_CAN2_RD GPIO_CAN2_RD_2
|
2013-04-01 16:10:54 +02:00
|
|
|
#define GPIO_CAN2_TD GPIO_CAN2_TD_2
|
2013-02-26 15:09:43 +01:00
|
|
|
#define GPIO_I2C1_SDA GPIO_I2C0_SDA
|
|
|
|
|
#define GPIO_I2C1_SCL GPIO_I2C0_SCL
|
|
|
|
|
#define GPIO_SSP1_SCK GPIO_SSP1_SCK_1
|
|
|
|
|
#define GPIO_UART2_TXD GPIO_UART2_TXD_1
|
|
|
|
|
#define GPIO_UART2_RXD GPIO_UART2_RXD_1
|
|
|
|
|
#define GPIO_UART1_TXD GPIO_UART1_TXD_2
|
|
|
|
|
#define GPIO_UART1_RXD GPIO_UART1_RXD_2
|
2013-03-22 15:30:54 +01:00
|
|
|
#define GPIO_SSP0_SCK GPIO_SSP0_SCK_2
|
|
|
|
|
#define GPIO_SSP0_SSEL GPIO_SSP0_SSEL_2
|
|
|
|
|
#define GPIO_SSP0_MISO GPIO_SSP0_MISO_2
|
|
|
|
|
#define GPIO_SSP0_MOSI GPIO_SSP0_MOSI_2
|
2013-02-26 15:09:43 +01:00
|
|
|
|
|
|
|
|
/* P1.0/ENET_TXD0 ETH-TXD0
|
|
|
|
|
* P1.1/ENET_TXD1 ETH-TXD1
|
|
|
|
|
* P1.4/ENET_TX_EN ETH-TXEN
|
|
|
|
|
* P1.8/ENET_CRS ETH-CRS
|
|
|
|
|
* P1.9/ENET_RXD0 ETH-RXD0 ETH
|
|
|
|
|
* P1.10/ENET_RXD1 ETH-RXD1
|
|
|
|
|
* P1.14/ENET_RX_ER ETH-RXER
|
|
|
|
|
* P1.15/ENET_REF_CLK ETH-REFCLK
|
|
|
|
|
* P1.16/ENET_MDC ETH-MDC
|
|
|
|
|
* P1.17/ENET_MDIO ETH-MDIO
|
|
|
|
|
* P1.18/USB_UP_LED/PWM1.1/CAP1.0 USB-UP-LED
|
|
|
|
|
* P1.19/MCOA0/nUSB_PPWR/CAP1.1 KEY1
|
|
|
|
|
* P1.20/MCFB0/PWM1.2/SCK0 LCD-SCK
|
|
|
|
|
* P1.21/MCABORT/PWM1.3/SSEL0 LCD-SSEL
|
|
|
|
|
* P1.22/MCOB0/USB_PWRD/MAT1.0 LCD-A0 LCD
|
|
|
|
|
* P1.23/MCFB1/PWM1.4/MISO0 NC
|
|
|
|
|
* P1.24/MCFB2/PWM1.5/MOSI0 LCD_MOSI
|
|
|
|
|
* P1.25/MCOA1/MAT1.1 LCD-RST
|
|
|
|
|
* P1.26/MCOB1/PWM1.6/CAP0.0 LCD-AO
|
|
|
|
|
* P1.27/CLKOUT/nUSB_OVRCR/CAP0.1 KEY2
|
|
|
|
|
* P1.28/MCOA2/MAT0.0 KEY3
|
|
|
|
|
* P1.29/MCOB2/PCAP1.1/MAT0.1 CAP1 PWM-CON
|
|
|
|
|
* P1.30/VBUS/AD0.4 VBUS USB
|
|
|
|
|
* P1.31/SCK1/AD0.5 KEY4
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#define GPIO_ENET_MDC GPIO_ENET_MDC_1
|
|
|
|
|
#define GPIO_ENET_MDIO GPIO_ENET_MDIO_1
|
|
|
|
|
|
|
|
|
|
/* P2.0/PWM1.1/TXD1 TXD1
|
|
|
|
|
* P2.1/PWM1.2/RXD1 RXD1 COM1
|
|
|
|
|
* P2.2/PWM1.3/CTS1/TRACEDATA3 CTS1
|
|
|
|
|
* P2.3/PWM1.4/DCD1/TRACEDATA2 PWM4
|
|
|
|
|
* P2.4/PWM1.5/DSR1/TRACEDATA1 PWM5 PWM
|
|
|
|
|
* P2.5/PWM1.6/DTR1/TRACEDATA0 PWM6
|
|
|
|
|
* P2.6/PCAP1.0/RI1/TRACECLK CAP0
|
|
|
|
|
* P2.7/RD2/RTS1 RD2 RD2 CAN2
|
|
|
|
|
* P2.8/TD2/TXD2 TD2 TD2
|
|
|
|
|
* P2.9/USB_CONNECT/RXD2 USB_CONNECT USB
|
|
|
|
|
* P2.10/nEINT0/NMI ISP
|
|
|
|
|
* P2.11/nEINT1/I2STX_CLK INT1 I2C
|
|
|
|
|
* P2.12/nEINT2/I2STX_WS SD-DET SD-CARD
|
|
|
|
|
* P2.13/nEINT3/I2STX_SDA KEY5
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#define GPIO_PWM1p2 GPIO_PWM1p2_3
|
|
|
|
|
#define GPIO_PWM1p3 GPIO_PWM1p3_3
|
|
|
|
|
#define GPIO_PWM1p4 GPIO_PWM1p4_2
|
|
|
|
|
#define GPIO_PWM1p5 GPIO_PWM1p5_2
|
|
|
|
|
#define GPIO_PWM1p6 GPIO_PWM1p6_2
|
|
|
|
|
|
|
|
|
|
/* P3.25/MAT0.0/PWM1.2 PWM2 PWM
|
|
|
|
|
* P3.26/STCLK/MAT0.1/PWM1.3 PWM3
|
|
|
|
|
*
|
|
|
|
|
* P4.28/RX_MCLK/MAT2.0/TXD3 GPIO2 SPI
|
|
|
|
|
* P4.28/RX_MCLK/MAT2.0/TXD3 GPIO3
|
|
|
|
|
*/
|
|
|
|
|
|
2019-08-13 18:08:49 +02:00
|
|
|
/****************************************************************************
|
2013-02-26 15:09:43 +01:00
|
|
|
* Public Types
|
2019-08-13 18:08:49 +02:00
|
|
|
****************************************************************************/
|
2013-02-26 15:09:43 +01:00
|
|
|
|
|
|
|
|
#ifndef __ASSEMBLY__
|
|
|
|
|
|
2019-08-13 18:08:49 +02:00
|
|
|
/****************************************************************************
|
2013-02-26 15:09:43 +01:00
|
|
|
* Public Data
|
2019-08-13 18:08:49 +02:00
|
|
|
****************************************************************************/
|
2013-02-26 15:09:43 +01:00
|
|
|
|
|
|
|
|
#undef EXTERN
|
|
|
|
|
#if defined(__cplusplus)
|
|
|
|
|
#define EXTERN extern "C"
|
2019-08-13 18:08:49 +02:00
|
|
|
extern "C"
|
|
|
|
|
{
|
2013-02-26 15:09:43 +01:00
|
|
|
#else
|
|
|
|
|
#define EXTERN extern
|
|
|
|
|
#endif
|
|
|
|
|
|
2019-08-13 18:08:49 +02:00
|
|
|
/****************************************************************************
|
2013-02-26 15:09:43 +01:00
|
|
|
* Public Function Prototypes
|
2019-08-13 18:08:49 +02:00
|
|
|
****************************************************************************/
|
2013-02-26 15:09:43 +01:00
|
|
|
|
2019-08-13 18:08:49 +02:00
|
|
|
/****************************************************************************
|
2019-07-11 18:50:00 +02:00
|
|
|
* Name: lpc17_40_led
|
2013-09-23 15:47:56 +02:00
|
|
|
*
|
|
|
|
|
* Description:
|
2021-04-06 12:13:09 +02:00
|
|
|
* Once the system has booted,
|
|
|
|
|
* these functions can be used to control LEDs 1
|
2013-09-23 15:47:56 +02:00
|
|
|
*
|
2019-08-13 18:08:49 +02:00
|
|
|
****************************************************************************/
|
2013-09-23 15:47:56 +02:00
|
|
|
|
|
|
|
|
#ifdef CONFIG_ARCH_LEDS
|
2019-07-11 18:50:00 +02:00
|
|
|
void lpc17_40_led(int lednum, int state);
|
2013-09-23 15:47:56 +02:00
|
|
|
#endif
|
|
|
|
|
|
2013-02-26 15:09:43 +01:00
|
|
|
#undef EXTERN
|
|
|
|
|
#if defined(__cplusplus)
|
|
|
|
|
}
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#endif /* __ASSEMBLY__ */
|
2020-01-31 19:07:39 +01:00
|
|
|
#endif /* __BOARDS_ARM_LPC17XX_40XX_ZKIT_ARM_1769_INCLUDE_BOARD_H */
|
