2016-01-16 01:49:27 +01:00
|
|
|
README
|
|
|
|
|
======
|
|
|
|
|
|
2016-01-18 00:53:57 +01:00
|
|
|
The Olimex STM32-H407 configuration is based on
|
|
|
|
|
stm32Fdiscovery and Olimex STM32-H405.
|
2016-01-16 01:49:27 +01:00
|
|
|
|
2016-01-18 00:53:57 +01:00
|
|
|
The H407 was programmed with ST-LINK/V2 from both Win8.1 and Ubuntu 14.04
|
2016-04-05 16:04:52 +02:00
|
|
|
This release provides baseline for H407 12MHZ clock in include/board.h
|
2016-01-16 01:49:27 +01:00
|
|
|
|
2016-01-18 00:53:57 +01:00
|
|
|
nsh - Only basic shell response tested on USART2
|
2016-01-16 01:49:27 +01:00
|
|
|
|
2016-04-05 16:04:52 +02:00
|
|
|
Development Environment
|
|
|
|
|
=======================
|
2016-01-16 01:49:27 +01:00
|
|
|
|
2016-04-05 16:04:52 +02:00
|
|
|
Either Linux or Cygwin on Windows can be used for the development environment.
|
|
|
|
|
The source has been built only using the GNU toolchain (see below). Other
|
|
|
|
|
toolchains will likely cause problems.
|
|
|
|
|
|
|
|
|
|
LEDs
|
|
|
|
|
====
|
|
|
|
|
|
|
|
|
|
The H407 board has 1 Status LED;
|
|
|
|
|
|
|
|
|
|
SDCard
|
|
|
|
|
======
|
|
|
|
|
|
|
|
|
|
Expects to be plugged in else hangs. TODO: Shouldn't hang.
|
|
|
|
|
SDIO 4bit with pulls/downs on pins. Doesn't have a SD card detect pin.
|
|
|
|
|
|
|
|
|
|
UARTs
|
|
|
|
|
=====
|
|
|
|
|
|
|
|
|
|
On the H407 board, ?? all uarts are available for pin mappings
|
|
|
|
|
USART2 is typically used for nsh console
|
|
|
|
|
|
|
|
|
|
STM32-H407-specific Configuration Options
|
|
|
|
|
===============================================
|
