nuttx/boards/arm/sam34/sam4l-xplained/src/sam_userleds.c

/****************************************************************************
 * boards/arm/sam34/sam4l-xplained/src/sam_userleds.c
 *
 *   Copyright (C) 2013, 2015 Gregory Nutt. All rights reserved.
 *   Author: Gregory Nutt <gnutt@nuttx.org>
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 * 3. Neither the name NuttX nor the names of its contributors may be
 *    used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
 * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
 * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 *
 ****************************************************************************/
/* There are three LEDs on board the SAM4L Xplained Pro board:  The EDBG
 * controls two of the LEDs, a power LED and a status LED.  There is only
 * one user controllable LED, a yellow LED labeled LED0 near the SAM4L USB
 * connector.
 *
 * This LED is controlled by PC07 and LED0 can be activated by driving the
 * PC07 to GND.
 *
 * When CONFIG_ARCH_LEDS is defined in the NuttX configuration, NuttX will
 * control LED0.  Otherwise, LED0 can be controlled from user applications
 * using the logic in this file.
 */

/****************************************************************************
 * Included Files
 ****************************************************************************/

#include <nuttx/config.h>

#include <stdint.h>
#include <stdbool.h>
#include <debug.h>

#include <arch/board/board.h>

#include "sam_gpio.h"
#include "sam4l-xplained.h"

#ifndef CONFIG_ARCH_LEDS

/****************************************************************************
 * Public Functions
 ****************************************************************************/

/****************************************************************************
 * Name: board_userled_initialize
 *
 * Description:
 *   If CONFIG_ARCH_LEDS is defined, then NuttX will control the on-board
 *   LEDs.  If CONFIG_ARCH_LEDS is not defined, then the
 *   board_userled_initialize() is available to initialize the LED0 from
 *   user application logic.
 *
 ****************************************************************************/

uint32_t board_userled_initialize(void)
{
  sam_configgpio(GPIO_LED0);
  return BOARD_NLEDS;
}

/****************************************************************************
 * Name: board_userled
 *
 * Description:
 *   If CONFIG_ARCH_LEDS is defined, then NuttX will control the on-board
 *  LEDs.  If CONFIG_ARCH_LEDS is not defined, then the board_userled() is
 *  available to control the LED0 from user application logic.
 *
 ****************************************************************************/

void board_userled(int led, bool ledon)
{
  if (led == BOARD_LED0)
    {
      sam_gpiowrite(GPIO_LED0, !ledon);
    }
}

/****************************************************************************
 * Name: board_userled_all
 *
 * Description:
 *   If CONFIG_ARCH_LEDS is defined, then NuttX will control the on-board
 *  LEDs.  If CONFIG_ARCH_LEDS is not defined, then the board_userled_all() is
 *  available to control the LED0 from user application logic.  NOTE:  since
 *  there is only a single LED on-board, this is function is not very useful.
 *
 ****************************************************************************/

void board_userled_all(uint32_t ledset)
{
  board_userled(BOARD_LED0, (ledset & BOARD_LED0_BIT) != 0);
}

#endif /* !CONFIG_ARCH_LEDS */