2012-11-21 19:19:49 +01:00
|
|
|
/****************************************************************************************************
|
|
|
|
|
* configs/cloudctrl/src/cloudctrl-internal.h
|
|
|
|
|
* arch/arm/src/board/cloudctrl-internal.n
|
|
|
|
|
*
|
|
|
|
|
* Copyright (C) 2012 Gregory Nutt. All rights reserved.
|
|
|
|
|
* Author: Gregory Nutt <gnutt@nuttx.org>
|
|
|
|
|
* Darcy Gong <darcy.gong@gmail.com>
|
|
|
|
|
*
|
|
|
|
|
* Redistribution and use in source and binary forms, with or without
|
|
|
|
|
* modification, are permitted provided that the following conditions
|
|
|
|
|
* are met:
|
|
|
|
|
*
|
|
|
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
|
|
|
* notice, this list of conditions and the following disclaimer.
|
|
|
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
|
|
|
* notice, this list of conditions and the following disclaimer in
|
|
|
|
|
* the documentation and/or other materials provided with the
|
|
|
|
|
* distribution.
|
|
|
|
|
* 3. Neither the name NuttX nor the names of its contributors may be
|
|
|
|
|
* used to endorse or promote products derived from this software
|
|
|
|
|
* without specific prior written permission.
|
|
|
|
|
*
|
|
|
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
|
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
|
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
|
|
|
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
|
|
|
|
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
|
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
|
|
|
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
|
|
|
|
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
|
|
|
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
|
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
|
|
|
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
|
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
|
|
|
*
|
|
|
|
|
****************************************************************************************************/
|
|
|
|
|
|
|
|
|
|
#ifndef __CONFIGS_CLOUDCTRLL_SRC_CLOUDCTRL_INTERNAL_H
|
|
|
|
|
#define __CONFIGS_CLOUDCTRLL_SRC_CLOUDCTRL_INTERNAL_H
|
|
|
|
|
|
|
|
|
|
/****************************************************************************************************
|
|
|
|
|
* Included Files
|
|
|
|
|
****************************************************************************************************/
|
|
|
|
|
|
|
|
|
|
#include <nuttx/config.h>
|
|
|
|
|
#include <nuttx/compiler.h>
|
|
|
|
|
#include <stdint.h>
|
|
|
|
|
|
|
|
|
|
/****************************************************************************************************
|
|
|
|
|
* Definitions
|
|
|
|
|
****************************************************************************************************/
|
|
|
|
|
/* Configuration ************************************************************************************/
|
|
|
|
|
/* How many SPI modules does this chip support? */
|
|
|
|
|
|
|
|
|
|
#if STM32_NSPI < 1
|
|
|
|
|
# undef CONFIG_STM32_SPI1
|
|
|
|
|
# undef CONFIG_STM32_SPI2
|
|
|
|
|
# undef CONFIG_STM32_SPI3
|
|
|
|
|
#elif STM32_NSPI < 2
|
|
|
|
|
# undef CONFIG_STM32_SPI2
|
|
|
|
|
# undef CONFIG_STM32_SPI3
|
|
|
|
|
#elif STM32_NSPI < 3
|
|
|
|
|
# undef CONFIG_STM32_SPI3
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
/* cloudctrl GPIO Configuration **********************************************************************/
|
|
|
|
|
|
|
|
|
|
/* STM3240G-EVAL GPIOs ******************************************************************************/
|
|
|
|
|
/* Ethernet
|
|
|
|
|
*
|
|
|
|
|
* -- ---- -------------- ----------------------------------------------------------
|
|
|
|
|
* PN NAME SIGNAL NOTES
|
|
|
|
|
* -- ---- -------------- ----------------------------------------------------------
|
|
|
|
|
* 24 PA1 MII_RX_CLK Ethernet PHY NOTE: Despite the MII labeling of these
|
|
|
|
|
* RMII_REF_CLK Ethernet PHY signals, the DM916AEP is actually configured
|
|
|
|
|
* 25 PA2 MII_MDIO Ethernet PHY to work in RMII mode.
|
|
|
|
|
* 48 PB11 MII_TX_EN Ethernet PHY
|
|
|
|
|
* 51 PB12 MII_TXD0 Ethernet PHY
|
|
|
|
|
* 52 PB13 MII_TXD1 Ethernet PHY
|
|
|
|
|
* 16 PC1 MII_MDC Ethernet PHY
|
|
|
|
|
* 34 PC5 MII_INT Ethernet PHY
|
|
|
|
|
* 55 PD8 MII_RX_DV Ethernet PHY. Requires CONFIG_STM32_ETH_REMAP
|
|
|
|
|
* 55 PD8 RMII_CRSDV Ethernet PHY. Requires CONFIG_STM32_ETH_REMAP
|
|
|
|
|
* 56 PD9 MII_RXD0 Ethernet PHY. Requires CONFIG_STM32_ETH_REMAP
|
|
|
|
|
* 57 PD10 MII_RXD1 Ethernet PHY. Requires CONFIG_STM32_ETH_REMAP
|
|
|
|
|
*
|
2014-04-14 00:22:22 +02:00
|
|
|
* The board desdign can support a 50MHz external clock to drive the PHY
|
2012-11-21 19:19:49 +01:00
|
|
|
* (U9). However, on my board, U9 is not present.
|
|
|
|
|
*
|
|
|
|
|
* 67 PA8 MCO DM9161AEP
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#ifdef CONFIG_STM32_ETHMAC
|
|
|
|
|
# define GPIO_MII_INT (GPIO_INPUT|GPIO_CNF_INFLOAT|GPIO_EXTI|GPIO_PORTC|GPIO_PIN5)
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
/* Use MCU Pin Reset DM9161 PHY Chip */
|
|
|
|
|
|
2013-09-17 18:44:23 +02:00
|
|
|
#ifdef CONFIG_ETH0_PHY_DM9161
|
2012-11-21 19:19:49 +01:00
|
|
|
# define GPIO_DM9161_RET (GPIO_OUTPUT|GPIO_CNF_OUTPP|GPIO_MODE_50MHz|GPIO_OUTPUT_SET|\
|
|
|
|
|
GPIO_PORTB|GPIO_PIN15)
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
/* Wireless
|
|
|
|
|
*
|
|
|
|
|
* -- ---- -------------- -------------------------------------------------------------------
|
|
|
|
|
* PN NAME SIGNAL NOTES
|
|
|
|
|
* -- ---- -------------- -------------------------------------------------------------------
|
|
|
|
|
* 26 PA3 315M_VT
|
|
|
|
|
* 17 PC2 WIRELESS_INT
|
|
|
|
|
* 18 PC3 WIRELESS_CE To the NRF24L01 2.4G wireless module
|
|
|
|
|
* 59 PD12 WIRELESS_CS To the NRF24L01 2.4G wireless module
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#define GPIO_WIRELESS_CS (GPIO_OUTPUT|GPIO_CNF_OUTPP|GPIO_MODE_50MHz|\
|
|
|
|
|
GPIO_OUTPUT_SET|GPIO_PORTD|GPIO_PIN12)
|
|
|
|
|
|
|
|
|
|
/* Buttons
|
|
|
|
|
*
|
|
|
|
|
* -- ---- -------------- -------------------------------------------------------------------
|
|
|
|
|
* PN NAME SIGNAL NOTES
|
|
|
|
|
* -- ---- -------------- -------------------------------------------------------------------
|
|
|
|
|
* 23 PA0 WAKEUP Connected to KEY3. Active low: Closing KEY4 pulls WAKEUP to ground.
|
|
|
|
|
* 47 PB10 USERKEY Connected to KEY1
|
|
|
|
|
* 33 PC4 TAMPER Connected to KEY2
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
/* BUTTONS -- NOTE that all have EXTI interrupts configured */
|
|
|
|
|
|
|
|
|
|
#define MIN_IRQBUTTON BUTTON_KEY1
|
|
|
|
|
#define MAX_IRQBUTTON BUTTON_KEY3
|
|
|
|
|
#define NUM_IRQBUTTONS (BUTTON_KEY3 - BUTTON_KEY1 + 1)
|
|
|
|
|
|
|
|
|
|
#define GPIO_BTN_WAKEUP (GPIO_INPUT|GPIO_CNF_INFLOAT|GPIO_EXTI|GPIO_PORTC|GPIO_PIN4)
|
|
|
|
|
#define GPIO_BTN_USERKEY (GPIO_INPUT|GPIO_CNF_INFLOAT|GPIO_EXTI|GPIO_PORTB|GPIO_PIN10)
|
|
|
|
|
#define GPIO_BTN_TAMPER (GPIO_INPUT|GPIO_CNF_INFLOAT|GPIO_EXTI|GPIO_PORTA|GPIO_PIN0)
|
|
|
|
|
|
|
|
|
|
/* LEDs
|
|
|
|
|
*
|
|
|
|
|
* -- ---- -------------- -------------------------------------------------------------------
|
|
|
|
|
* PN NAME SIGNAL NOTES
|
|
|
|
|
* -- ---- -------------- -------------------------------------------------------------------
|
|
|
|
|
* 1 PE2 LED1 Active low: Pulled high
|
|
|
|
|
* 2 PE3 LED2 Active low: Pulled high
|
|
|
|
|
* 3 PE4 LED3 Active low: Pulled high
|
|
|
|
|
* 4 PE5 LED4 Active low: Pulled high
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#define GPIO_LED1 (GPIO_OUTPUT|GPIO_CNF_OUTPP|GPIO_MODE_50MHz|\
|
|
|
|
|
GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN2)
|
|
|
|
|
#define GPIO_LED2 (GPIO_OUTPUT|GPIO_CNF_OUTPP|GPIO_MODE_50MHz|\
|
|
|
|
|
GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN3)
|
|
|
|
|
#define GPIO_LED3 (GPIO_OUTPUT|GPIO_CNF_OUTPP|GPIO_MODE_50MHz|\
|
|
|
|
|
GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN4)
|
|
|
|
|
#define GPIO_LED4 (GPIO_OUTPUT|GPIO_CNF_OUTPP|GPIO_MODE_50MHz|\
|
|
|
|
|
GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN5)
|
|
|
|
|
|
|
|
|
|
/* RS-485
|
|
|
|
|
*
|
|
|
|
|
* -- ---- -------------- -------------------------------------------------------------------
|
|
|
|
|
* PN NAME SIGNAL NOTES
|
|
|
|
|
* -- ---- -------------- -------------------------------------------------------------------
|
|
|
|
|
* 88 PD7 485_DIR SP3485 read enable (not)
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
/* To be provided */
|
|
|
|
|
|
|
|
|
|
/* USB
|
|
|
|
|
*
|
|
|
|
|
* -- ---- -------------- -------------------------------------------------------------------
|
|
|
|
|
* PN NAME SIGNAL NOTES
|
|
|
|
|
* -- ---- -------------- -------------------------------------------------------------------
|
|
|
|
|
* 95 PB8 USB_PWR Drives USB VBUS
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#define GPIO_OTGFS_PWRON (GPIO_OUTPUT|GPIO_CNF_OUTPP|GPIO_SPEED_100MHz|\
|
|
|
|
|
GPIO_PUSHPULL|GPIO_PORTB|GPIO_PIN8)
|
|
|
|
|
|
|
|
|
|
/* Audio DAC
|
|
|
|
|
*
|
|
|
|
|
* -- ---- -------------- -------------------------------------------------------------------
|
|
|
|
|
* PN NAME SIGNAL NOTES
|
|
|
|
|
* -- ---- -------------- -------------------------------------------------------------------
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
/* To be provided */
|
|
|
|
|
|
|
|
|
|
/* SPI FLASH
|
|
|
|
|
*
|
|
|
|
|
* -- ---- -------------- -------------------------------------------------------------------
|
|
|
|
|
* PN NAME SIGNAL NOTES
|
|
|
|
|
* -- ---- -------------- -------------------------------------------------------------------
|
|
|
|
|
* 96 PB9 F_CS To both the TFT LCD (CN13) and to the W25X16 SPI FLASH
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#define GPIO_FLASH_CS (GPIO_OUTPUT|GPIO_CNF_OUTPP|GPIO_MODE_50MHz|\
|
|
|
|
|
GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN9)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/* Relays */
|
|
|
|
|
|
|
|
|
|
#define NUM_RELAYS 2
|
|
|
|
|
#define GPIO_RELAYS_R00 (GPIO_OUTPUT|GPIO_CNF_OUTPP|GPIO_MODE_50MHz|\
|
|
|
|
|
GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN0)
|
|
|
|
|
#define GPIO_RELAYS_R01 (GPIO_OUTPUT|GPIO_CNF_OUTPP|GPIO_MODE_50MHz|\
|
|
|
|
|
GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN1)
|
|
|
|
|
|
|
|
|
|
/****************************************************************************************************
|
|
|
|
|
* Public Types
|
|
|
|
|
****************************************************************************************************/
|
|
|
|
|
|
|
|
|
|
/****************************************************************************************************
|
|
|
|
|
* Public data
|
|
|
|
|
****************************************************************************************************/
|
|
|
|
|
|
|
|
|
|
#ifndef __ASSEMBLY__
|
|
|
|
|
|
|
|
|
|
/****************************************************************************************************
|
|
|
|
|
* Public Functions
|
|
|
|
|
****************************************************************************************************/
|
|
|
|
|
|
|
|
|
|
/****************************************************************************************************
|
|
|
|
|
* Name: stm32_spiinitialize
|
|
|
|
|
*
|
|
|
|
|
* Description:
|
|
|
|
|
* Called to configure SPI chip select GPIO pins for the STM3240G-EVAL board.
|
|
|
|
|
*
|
|
|
|
|
****************************************************************************************************/
|
|
|
|
|
|
|
|
|
|
void weak_function stm32_spiinitialize(void);
|
|
|
|
|
|
|
|
|
|
/****************************************************************************************************
|
|
|
|
|
* Name: stm32_usbinitialize
|
|
|
|
|
*
|
|
|
|
|
* Description:
|
|
|
|
|
* Called from stm32_usbinitialize very early in inialization to setup USB-related GPIO pins for
|
|
|
|
|
* the STM3240G-EVAL board.
|
|
|
|
|
*
|
|
|
|
|
****************************************************************************************************/
|
|
|
|
|
|
|
|
|
|
#ifdef CONFIG_STM32_OTGFS
|
|
|
|
|
void weak_function stm32_usbinitialize(void);
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
/****************************************************************************************************
|
|
|
|
|
* Name: stm32_usbhost_initialize
|
|
|
|
|
*
|
|
|
|
|
* Description:
|
|
|
|
|
* Called at application startup time to initialize the USB host functionality. This function will
|
|
|
|
|
* start a thread that will monitor for device connection/disconnection events.
|
|
|
|
|
*
|
|
|
|
|
****************************************************************************************************/
|
|
|
|
|
|
|
|
|
|
#if defined(CONFIG_STM32_OTGFS) && defined(CONFIG_USBHOST)
|
|
|
|
|
int stm32_usbhost_initialize(void);
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
/****************************************************************************
|
|
|
|
|
* Name: stm32_sdinitialize
|
|
|
|
|
*
|
|
|
|
|
* Description:
|
|
|
|
|
* Initialize the SPI-based SD card. Requires CONFIG_DISABLE_MOUNTPOINT=n
|
|
|
|
|
* and CONFIG_STM32_SPI1=y
|
|
|
|
|
*
|
|
|
|
|
****************************************************************************/
|
|
|
|
|
|
|
|
|
|
int stm32_sdinitialize(int minor);
|
|
|
|
|
|
|
|
|
|
/****************************************************************************
|
|
|
|
|
* Name: stm32_w25initialize
|
|
|
|
|
*
|
|
|
|
|
* Description:
|
|
|
|
|
* Initialize and register the W25 FLASH file system.
|
|
|
|
|
*
|
|
|
|
|
****************************************************************************/
|
|
|
|
|
|
|
|
|
|
#ifdef CONFIG_MTD_W25
|
|
|
|
|
int stm32_w25initialize(int minor);
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#endif /* __ASSEMBLY__ */
|
|
|
|
|
#endif /* __CONFIGS_CLOUDCTRLL_SRC_CLOUDCTRL_INTERNAL_H */
|
