nuttx/net/route/net_del_fileroute.c

482 lines
13 KiB
C
Raw Normal View History

This commit adds support for routing tables in files in a file system. This might be useful for customized, per-unit routing tables. There are two issues with it however: 1. Reading from file system on a per packet basis could be slow. I think it probably should have a small, in-memory cache of most frequently used routes for good problem. 2. Currently the delroute logic is disabled due to a problem with the design. NuttX does not currently support truncate(). Therefore, it is not possible to delete entries from the routing table file. In this current implementation, that leaves the last entry intact at the end of the file. An alternative design might include a tag on each record to indicate if the record is valid or not. That would work but would add complexity to the other routing table functions. The existing implementation is available for testing purposes only if CONFIG_EXPERIMENTAL=y. Squashed commit of the following: net/route: The current delroute design depends on file truncation. However, NuttX does not currently support truncate. Alternative, more complex designs are possible but not implemented. At present the file routing table are otherwise functional but the delroute logic is disabled via CONFIG_EXPERIMENTAL. Enable it only if you plan to fix it. net/route: Fix some issues with locking routing table files. net/route: Add partial implementation of delroute for the case where the routing table is in a file. net/route: Add support for seeking to positions in the routing table. net/route: Add net_addroute_ipv4/6() using a file-based routing table. net/route: Add net_foreach_ipv4/4() using a file-based routing table. net/route: Initial build, configuration, and fs utilies to support routing tables in a file.
2017-09-29 16:33:36 +02:00
/****************************************************************************
* net/route/net_del_fileroute.c
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
This commit adds support for routing tables in files in a file system. This might be useful for customized, per-unit routing tables. There are two issues with it however: 1. Reading from file system on a per packet basis could be slow. I think it probably should have a small, in-memory cache of most frequently used routes for good problem. 2. Currently the delroute logic is disabled due to a problem with the design. NuttX does not currently support truncate(). Therefore, it is not possible to delete entries from the routing table file. In this current implementation, that leaves the last entry intact at the end of the file. An alternative design might include a tag on each record to indicate if the record is valid or not. That would work but would add complexity to the other routing table functions. The existing implementation is available for testing purposes only if CONFIG_EXPERIMENTAL=y. Squashed commit of the following: net/route: The current delroute design depends on file truncation. However, NuttX does not currently support truncate. Alternative, more complex designs are possible but not implemented. At present the file routing table are otherwise functional but the delroute logic is disabled via CONFIG_EXPERIMENTAL. Enable it only if you plan to fix it. net/route: Fix some issues with locking routing table files. net/route: Add partial implementation of delroute for the case where the routing table is in a file. net/route: Add support for seeking to positions in the routing table. net/route: Add net_addroute_ipv4/6() using a file-based routing table. net/route: Add net_foreach_ipv4/4() using a file-based routing table. net/route: Initial build, configuration, and fs utilies to support routing tables in a file.
2017-09-29 16:33:36 +02:00
*
* http://www.apache.org/licenses/LICENSE-2.0
This commit adds support for routing tables in files in a file system. This might be useful for customized, per-unit routing tables. There are two issues with it however: 1. Reading from file system on a per packet basis could be slow. I think it probably should have a small, in-memory cache of most frequently used routes for good problem. 2. Currently the delroute logic is disabled due to a problem with the design. NuttX does not currently support truncate(). Therefore, it is not possible to delete entries from the routing table file. In this current implementation, that leaves the last entry intact at the end of the file. An alternative design might include a tag on each record to indicate if the record is valid or not. That would work but would add complexity to the other routing table functions. The existing implementation is available for testing purposes only if CONFIG_EXPERIMENTAL=y. Squashed commit of the following: net/route: The current delroute design depends on file truncation. However, NuttX does not currently support truncate. Alternative, more complex designs are possible but not implemented. At present the file routing table are otherwise functional but the delroute logic is disabled via CONFIG_EXPERIMENTAL. Enable it only if you plan to fix it. net/route: Fix some issues with locking routing table files. net/route: Add partial implementation of delroute for the case where the routing table is in a file. net/route: Add support for seeking to positions in the routing table. net/route: Add net_addroute_ipv4/6() using a file-based routing table. net/route: Add net_foreach_ipv4/4() using a file-based routing table. net/route: Initial build, configuration, and fs utilies to support routing tables in a file.
2017-09-29 16:33:36 +02:00
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
This commit adds support for routing tables in files in a file system. This might be useful for customized, per-unit routing tables. There are two issues with it however: 1. Reading from file system on a per packet basis could be slow. I think it probably should have a small, in-memory cache of most frequently used routes for good problem. 2. Currently the delroute logic is disabled due to a problem with the design. NuttX does not currently support truncate(). Therefore, it is not possible to delete entries from the routing table file. In this current implementation, that leaves the last entry intact at the end of the file. An alternative design might include a tag on each record to indicate if the record is valid or not. That would work but would add complexity to the other routing table functions. The existing implementation is available for testing purposes only if CONFIG_EXPERIMENTAL=y. Squashed commit of the following: net/route: The current delroute design depends on file truncation. However, NuttX does not currently support truncate. Alternative, more complex designs are possible but not implemented. At present the file routing table are otherwise functional but the delroute logic is disabled via CONFIG_EXPERIMENTAL. Enable it only if you plan to fix it. net/route: Fix some issues with locking routing table files. net/route: Add partial implementation of delroute for the case where the routing table is in a file. net/route: Add support for seeking to positions in the routing table. net/route: Add net_addroute_ipv4/6() using a file-based routing table. net/route: Add net_foreach_ipv4/4() using a file-based routing table. net/route: Initial build, configuration, and fs utilies to support routing tables in a file.
2017-09-29 16:33:36 +02:00
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdint.h>
#include <unistd.h>
This commit adds support for routing tables in files in a file system. This might be useful for customized, per-unit routing tables. There are two issues with it however: 1. Reading from file system on a per packet basis could be slow. I think it probably should have a small, in-memory cache of most frequently used routes for good problem. 2. Currently the delroute logic is disabled due to a problem with the design. NuttX does not currently support truncate(). Therefore, it is not possible to delete entries from the routing table file. In this current implementation, that leaves the last entry intact at the end of the file. An alternative design might include a tag on each record to indicate if the record is valid or not. That would work but would add complexity to the other routing table functions. The existing implementation is available for testing purposes only if CONFIG_EXPERIMENTAL=y. Squashed commit of the following: net/route: The current delroute design depends on file truncation. However, NuttX does not currently support truncate. Alternative, more complex designs are possible but not implemented. At present the file routing table are otherwise functional but the delroute logic is disabled via CONFIG_EXPERIMENTAL. Enable it only if you plan to fix it. net/route: Fix some issues with locking routing table files. net/route: Add partial implementation of delroute for the case where the routing table is in a file. net/route: Add support for seeking to positions in the routing table. net/route: Add net_addroute_ipv4/6() using a file-based routing table. net/route: Add net_foreach_ipv4/4() using a file-based routing table. net/route: Initial build, configuration, and fs utilies to support routing tables in a file.
2017-09-29 16:33:36 +02:00
#include <fcntl.h>
#include <string.h>
#include <errno.h>
#include <debug.h>
#include <arpa/inet.h>
#include <nuttx/fs/fs.h>
#include <nuttx/net/ip.h>
#include "netlink/netlink.h"
This commit adds support for routing tables in files in a file system. This might be useful for customized, per-unit routing tables. There are two issues with it however: 1. Reading from file system on a per packet basis could be slow. I think it probably should have a small, in-memory cache of most frequently used routes for good problem. 2. Currently the delroute logic is disabled due to a problem with the design. NuttX does not currently support truncate(). Therefore, it is not possible to delete entries from the routing table file. In this current implementation, that leaves the last entry intact at the end of the file. An alternative design might include a tag on each record to indicate if the record is valid or not. That would work but would add complexity to the other routing table functions. The existing implementation is available for testing purposes only if CONFIG_EXPERIMENTAL=y. Squashed commit of the following: net/route: The current delroute design depends on file truncation. However, NuttX does not currently support truncate. Alternative, more complex designs are possible but not implemented. At present the file routing table are otherwise functional but the delroute logic is disabled via CONFIG_EXPERIMENTAL. Enable it only if you plan to fix it. net/route: Fix some issues with locking routing table files. net/route: Add partial implementation of delroute for the case where the routing table is in a file. net/route: Add support for seeking to positions in the routing table. net/route: Add net_addroute_ipv4/6() using a file-based routing table. net/route: Add net_foreach_ipv4/4() using a file-based routing table. net/route: Initial build, configuration, and fs utilies to support routing tables in a file.
2017-09-29 16:33:36 +02:00
#include "route/fileroute.h"
#include "route/cacheroute.h"
This commit adds support for routing tables in files in a file system. This might be useful for customized, per-unit routing tables. There are two issues with it however: 1. Reading from file system on a per packet basis could be slow. I think it probably should have a small, in-memory cache of most frequently used routes for good problem. 2. Currently the delroute logic is disabled due to a problem with the design. NuttX does not currently support truncate(). Therefore, it is not possible to delete entries from the routing table file. In this current implementation, that leaves the last entry intact at the end of the file. An alternative design might include a tag on each record to indicate if the record is valid or not. That would work but would add complexity to the other routing table functions. The existing implementation is available for testing purposes only if CONFIG_EXPERIMENTAL=y. Squashed commit of the following: net/route: The current delroute design depends on file truncation. However, NuttX does not currently support truncate. Alternative, more complex designs are possible but not implemented. At present the file routing table are otherwise functional but the delroute logic is disabled via CONFIG_EXPERIMENTAL. Enable it only if you plan to fix it. net/route: Fix some issues with locking routing table files. net/route: Add partial implementation of delroute for the case where the routing table is in a file. net/route: Add support for seeking to positions in the routing table. net/route: Add net_addroute_ipv4/6() using a file-based routing table. net/route: Add net_foreach_ipv4/4() using a file-based routing table. net/route: Initial build, configuration, and fs utilies to support routing tables in a file.
2017-09-29 16:33:36 +02:00
#include "route/route.h"
#if defined(CONFIG_ROUTE_IPv4_FILEROUTE) || defined(CONFIG_ROUTE_IPv6_FILEROUTE)
/****************************************************************************
* Private Types
This commit adds support for routing tables in files in a file system. This might be useful for customized, per-unit routing tables. There are two issues with it however: 1. Reading from file system on a per packet basis could be slow. I think it probably should have a small, in-memory cache of most frequently used routes for good problem. 2. Currently the delroute logic is disabled due to a problem with the design. NuttX does not currently support truncate(). Therefore, it is not possible to delete entries from the routing table file. In this current implementation, that leaves the last entry intact at the end of the file. An alternative design might include a tag on each record to indicate if the record is valid or not. That would work but would add complexity to the other routing table functions. The existing implementation is available for testing purposes only if CONFIG_EXPERIMENTAL=y. Squashed commit of the following: net/route: The current delroute design depends on file truncation. However, NuttX does not currently support truncate. Alternative, more complex designs are possible but not implemented. At present the file routing table are otherwise functional but the delroute logic is disabled via CONFIG_EXPERIMENTAL. Enable it only if you plan to fix it. net/route: Fix some issues with locking routing table files. net/route: Add partial implementation of delroute for the case where the routing table is in a file. net/route: Add support for seeking to positions in the routing table. net/route: Add net_addroute_ipv4/6() using a file-based routing table. net/route: Add net_foreach_ipv4/4() using a file-based routing table. net/route: Initial build, configuration, and fs utilies to support routing tables in a file.
2017-09-29 16:33:36 +02:00
****************************************************************************/
#ifdef CONFIG_ROUTE_IPv4_FILEROUTE
struct route_match_ipv4_s
{
in_addr_t target; /* The target IP address to match */
in_addr_t netmask; /* The network mask to match */
unsigned int index; /* Index of match */
};
#endif
#ifdef CONFIG_ROUTE_IPv6_FILEROUTE
struct route_match_ipv6_s
{
net_ipv6addr_t target; /* The target IP address to match */
net_ipv6addr_t netmask; /* The network mask to match */
unsigned int index; /* Index of match */
};
#endif
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Name: net_match_ipv4
*
* Description:
* Return 1 if the route is available
*
* Input Parameters:
This commit adds support for routing tables in files in a file system. This might be useful for customized, per-unit routing tables. There are two issues with it however: 1. Reading from file system on a per packet basis could be slow. I think it probably should have a small, in-memory cache of most frequently used routes for good problem. 2. Currently the delroute logic is disabled due to a problem with the design. NuttX does not currently support truncate(). Therefore, it is not possible to delete entries from the routing table file. In this current implementation, that leaves the last entry intact at the end of the file. An alternative design might include a tag on each record to indicate if the record is valid or not. That would work but would add complexity to the other routing table functions. The existing implementation is available for testing purposes only if CONFIG_EXPERIMENTAL=y. Squashed commit of the following: net/route: The current delroute design depends on file truncation. However, NuttX does not currently support truncate. Alternative, more complex designs are possible but not implemented. At present the file routing table are otherwise functional but the delroute logic is disabled via CONFIG_EXPERIMENTAL. Enable it only if you plan to fix it. net/route: Fix some issues with locking routing table files. net/route: Add partial implementation of delroute for the case where the routing table is in a file. net/route: Add support for seeking to positions in the routing table. net/route: Add net_addroute_ipv4/6() using a file-based routing table. net/route: Add net_foreach_ipv4/4() using a file-based routing table. net/route: Initial build, configuration, and fs utilies to support routing tables in a file.
2017-09-29 16:33:36 +02:00
* route - The next route to examine
* arg - The match values (cast to void*)
*
* Returned Value:
* 0 if the entry is not a match; 1 if the entry matched and was cleared.
*
****************************************************************************/
#ifdef CONFIG_ROUTE_IPv4_FILEROUTE
static int net_match_ipv4(FAR struct net_route_ipv4_s *route, FAR void *arg)
{
FAR struct route_match_ipv4_s *match =
(FAR struct route_match_ipv4_s *)arg;
This commit adds support for routing tables in files in a file system. This might be useful for customized, per-unit routing tables. There are two issues with it however: 1. Reading from file system on a per packet basis could be slow. I think it probably should have a small, in-memory cache of most frequently used routes for good problem. 2. Currently the delroute logic is disabled due to a problem with the design. NuttX does not currently support truncate(). Therefore, it is not possible to delete entries from the routing table file. In this current implementation, that leaves the last entry intact at the end of the file. An alternative design might include a tag on each record to indicate if the record is valid or not. That would work but would add complexity to the other routing table functions. The existing implementation is available for testing purposes only if CONFIG_EXPERIMENTAL=y. Squashed commit of the following: net/route: The current delroute design depends on file truncation. However, NuttX does not currently support truncate. Alternative, more complex designs are possible but not implemented. At present the file routing table are otherwise functional but the delroute logic is disabled via CONFIG_EXPERIMENTAL. Enable it only if you plan to fix it. net/route: Fix some issues with locking routing table files. net/route: Add partial implementation of delroute for the case where the routing table is in a file. net/route: Add support for seeking to positions in the routing table. net/route: Add net_addroute_ipv4/6() using a file-based routing table. net/route: Add net_foreach_ipv4/4() using a file-based routing table. net/route: Initial build, configuration, and fs utilies to support routing tables in a file.
2017-09-29 16:33:36 +02:00
/* To match, the masked target address must be the same, and the masks
* must be the same.
*/
net_ipv4_dumproute("Comparing", route);
ninfo("With:\n");
include/endian.h: Fix format specifies type 'unsigned long' but the argument has type 'unsigned int' Error: route/net_del_ramroute.c:94:9: error: format specifies type 'unsigned long' but the argument has type 'unsigned int' [-Werror,-Wformat] HTONL(match->target), HTONL(match->netmask)); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /github/workspace/sources/nuttx/include/debug.h:232:23: note: expanded from macro 'ninfo' ^ /github/workspace/sources/nuttx/include/debug.h:102:43: note: expanded from macro '_none' do { if (0) syslog(LOG_ERR, format, ##__VA_ARGS__); } while (0) ~~~~~~ ^~~~~~~~~~~ /github/workspace/sources/nuttx/include/netinet/in.h:233:17: note: expanded from macro 'HTONL' ^ /github/workspace/sources/nuttx/include/endian.h:63:25: note: expanded from macro '__swap_uint32' ^ Error: route/net_del_ramroute.c:94:31: error: format specifies type 'unsigned long' but the argument has type 'unsigned int' [-Werror,-Wformat] HTONL(match->target), HTONL(match->netmask)); ~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~ /github/workspace/sources/nuttx/include/debug.h:232:23: note: expanded from macro 'ninfo' ^ /github/workspace/sources/nuttx/include/debug.h:102:43: note: expanded from macro '_none' do { if (0) syslog(LOG_ERR, format, ##__VA_ARGS__); } while (0) ~~~~~~ ^~~~~~~~~~~ /github/workspace/sources/nuttx/include/netinet/in.h:233:17: note: expanded from macro 'HTONL' ^ /github/workspace/sources/nuttx/include/endian.h:63:25: note: expanded from macro '__swap_uint32' Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-10-25 22:13:03 +02:00
ninfo(" target=%08" PRIx32 " netmask=%08" PRIx32 "\n",
HTONL(match->target), HTONL(match->netmask));
This commit adds support for routing tables in files in a file system. This might be useful for customized, per-unit routing tables. There are two issues with it however: 1. Reading from file system on a per packet basis could be slow. I think it probably should have a small, in-memory cache of most frequently used routes for good problem. 2. Currently the delroute logic is disabled due to a problem with the design. NuttX does not currently support truncate(). Therefore, it is not possible to delete entries from the routing table file. In this current implementation, that leaves the last entry intact at the end of the file. An alternative design might include a tag on each record to indicate if the record is valid or not. That would work but would add complexity to the other routing table functions. The existing implementation is available for testing purposes only if CONFIG_EXPERIMENTAL=y. Squashed commit of the following: net/route: The current delroute design depends on file truncation. However, NuttX does not currently support truncate. Alternative, more complex designs are possible but not implemented. At present the file routing table are otherwise functional but the delroute logic is disabled via CONFIG_EXPERIMENTAL. Enable it only if you plan to fix it. net/route: Fix some issues with locking routing table files. net/route: Add partial implementation of delroute for the case where the routing table is in a file. net/route: Add support for seeking to positions in the routing table. net/route: Add net_addroute_ipv4/6() using a file-based routing table. net/route: Add net_foreach_ipv4/4() using a file-based routing table. net/route: Initial build, configuration, and fs utilies to support routing tables in a file.
2017-09-29 16:33:36 +02:00
if (net_ipv4addr_maskcmp(route->target, match->target, match->netmask) &&
net_ipv4addr_cmp(route->netmask, match->netmask))
{
/* They match.. a non-zero value to terminate the traversal. The last
* value of index is the index to the matching entry.
*/
return 1;
}
/* Next time we are here, this will be the routing table index */
match->index++;
return 0;
}
#endif
#ifdef CONFIG_ROUTE_IPv6_FILEROUTE
static int net_match_ipv6(FAR struct net_route_ipv6_s *route, FAR void *arg)
{
FAR struct route_match_ipv6_s *match =
(FAR struct route_match_ipv6_s *)arg;
This commit adds support for routing tables in files in a file system. This might be useful for customized, per-unit routing tables. There are two issues with it however: 1. Reading from file system on a per packet basis could be slow. I think it probably should have a small, in-memory cache of most frequently used routes for good problem. 2. Currently the delroute logic is disabled due to a problem with the design. NuttX does not currently support truncate(). Therefore, it is not possible to delete entries from the routing table file. In this current implementation, that leaves the last entry intact at the end of the file. An alternative design might include a tag on each record to indicate if the record is valid or not. That would work but would add complexity to the other routing table functions. The existing implementation is available for testing purposes only if CONFIG_EXPERIMENTAL=y. Squashed commit of the following: net/route: The current delroute design depends on file truncation. However, NuttX does not currently support truncate. Alternative, more complex designs are possible but not implemented. At present the file routing table are otherwise functional but the delroute logic is disabled via CONFIG_EXPERIMENTAL. Enable it only if you plan to fix it. net/route: Fix some issues with locking routing table files. net/route: Add partial implementation of delroute for the case where the routing table is in a file. net/route: Add support for seeking to positions in the routing table. net/route: Add net_addroute_ipv4/6() using a file-based routing table. net/route: Add net_foreach_ipv4/4() using a file-based routing table. net/route: Initial build, configuration, and fs utilies to support routing tables in a file.
2017-09-29 16:33:36 +02:00
/* To match, the masked target address must be the same, and the masks
* must be the same.
*/
net_ipv6_dumproute("Comparing", route);
ninfo("With:\n");
ninfo(" target: %04x:%04x:%04x:%04x:%04x:%04x:%04x:%04x\n",
HTONS(match->target[0]), HTONS(match->target[1]),
HTONS(match->target[2]), HTONS(match->target[3]),
HTONS(match->target[4]), HTONS(match->target[5]),
HTONS(match->target[6]), HTONS(match->target[7]));
This commit adds support for routing tables in files in a file system. This might be useful for customized, per-unit routing tables. There are two issues with it however: 1. Reading from file system on a per packet basis could be slow. I think it probably should have a small, in-memory cache of most frequently used routes for good problem. 2. Currently the delroute logic is disabled due to a problem with the design. NuttX does not currently support truncate(). Therefore, it is not possible to delete entries from the routing table file. In this current implementation, that leaves the last entry intact at the end of the file. An alternative design might include a tag on each record to indicate if the record is valid or not. That would work but would add complexity to the other routing table functions. The existing implementation is available for testing purposes only if CONFIG_EXPERIMENTAL=y. Squashed commit of the following: net/route: The current delroute design depends on file truncation. However, NuttX does not currently support truncate. Alternative, more complex designs are possible but not implemented. At present the file routing table are otherwise functional but the delroute logic is disabled via CONFIG_EXPERIMENTAL. Enable it only if you plan to fix it. net/route: Fix some issues with locking routing table files. net/route: Add partial implementation of delroute for the case where the routing table is in a file. net/route: Add support for seeking to positions in the routing table. net/route: Add net_addroute_ipv4/6() using a file-based routing table. net/route: Add net_foreach_ipv4/4() using a file-based routing table. net/route: Initial build, configuration, and fs utilies to support routing tables in a file.
2017-09-29 16:33:36 +02:00
ninfo(" netmask: %04x:%04x:%04x:%04x:%04x:%04x:%04x:%04x\n",
HTONS(match->netmask[0]), HTONS(match->netmask[1]),
HTONS(match->netmask[2]), HTONS(match->netmask[3]),
HTONS(match->netmask[4]), HTONS(match->netmask[5]),
HTONS(match->netmask[6]), HTONS(match->netmask[7]));
This commit adds support for routing tables in files in a file system. This might be useful for customized, per-unit routing tables. There are two issues with it however: 1. Reading from file system on a per packet basis could be slow. I think it probably should have a small, in-memory cache of most frequently used routes for good problem. 2. Currently the delroute logic is disabled due to a problem with the design. NuttX does not currently support truncate(). Therefore, it is not possible to delete entries from the routing table file. In this current implementation, that leaves the last entry intact at the end of the file. An alternative design might include a tag on each record to indicate if the record is valid or not. That would work but would add complexity to the other routing table functions. The existing implementation is available for testing purposes only if CONFIG_EXPERIMENTAL=y. Squashed commit of the following: net/route: The current delroute design depends on file truncation. However, NuttX does not currently support truncate. Alternative, more complex designs are possible but not implemented. At present the file routing table are otherwise functional but the delroute logic is disabled via CONFIG_EXPERIMENTAL. Enable it only if you plan to fix it. net/route: Fix some issues with locking routing table files. net/route: Add partial implementation of delroute for the case where the routing table is in a file. net/route: Add support for seeking to positions in the routing table. net/route: Add net_addroute_ipv4/6() using a file-based routing table. net/route: Add net_foreach_ipv4/4() using a file-based routing table. net/route: Initial build, configuration, and fs utilies to support routing tables in a file.
2017-09-29 16:33:36 +02:00
if (net_ipv6addr_maskcmp(route->target, match->target, match->netmask) &&
net_ipv6addr_cmp(route->netmask, match->netmask))
{
/* They match.. a non-zero value to terminate the traversal. The last
* value of index is the index to the matching entry.
*/
return 1;
}
/* Next time we are here, this will be the routing table index */
match->index++;
return 0;
}
#endif
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: net_delroute_ipv4 and net_delroute_ipv6
*
* Description:
* Remove an existing route from the routing table
*
* Input Parameters:
This commit adds support for routing tables in files in a file system. This might be useful for customized, per-unit routing tables. There are two issues with it however: 1. Reading from file system on a per packet basis could be slow. I think it probably should have a small, in-memory cache of most frequently used routes for good problem. 2. Currently the delroute logic is disabled due to a problem with the design. NuttX does not currently support truncate(). Therefore, it is not possible to delete entries from the routing table file. In this current implementation, that leaves the last entry intact at the end of the file. An alternative design might include a tag on each record to indicate if the record is valid or not. That would work but would add complexity to the other routing table functions. The existing implementation is available for testing purposes only if CONFIG_EXPERIMENTAL=y. Squashed commit of the following: net/route: The current delroute design depends on file truncation. However, NuttX does not currently support truncate. Alternative, more complex designs are possible but not implemented. At present the file routing table are otherwise functional but the delroute logic is disabled via CONFIG_EXPERIMENTAL. Enable it only if you plan to fix it. net/route: Fix some issues with locking routing table files. net/route: Add partial implementation of delroute for the case where the routing table is in a file. net/route: Add support for seeking to positions in the routing table. net/route: Add net_addroute_ipv4/6() using a file-based routing table. net/route: Add net_foreach_ipv4/4() using a file-based routing table. net/route: Initial build, configuration, and fs utilies to support routing tables in a file.
2017-09-29 16:33:36 +02:00
*
* Returned Value:
* OK on success; Negated errno on failure.
*
****************************************************************************/
#ifdef CONFIG_ROUTE_IPv4_FILEROUTE
int net_delroute_ipv4(in_addr_t target, in_addr_t netmask)
{
struct route_match_ipv4_s match;
struct net_route_ipv4_s route;
struct file fshandle;
off_t filesize;
This commit adds support for routing tables in files in a file system. This might be useful for customized, per-unit routing tables. There are two issues with it however: 1. Reading from file system on a per packet basis could be slow. I think it probably should have a small, in-memory cache of most frequently used routes for good problem. 2. Currently the delroute logic is disabled due to a problem with the design. NuttX does not currently support truncate(). Therefore, it is not possible to delete entries from the routing table file. In this current implementation, that leaves the last entry intact at the end of the file. An alternative design might include a tag on each record to indicate if the record is valid or not. That would work but would add complexity to the other routing table functions. The existing implementation is available for testing purposes only if CONFIG_EXPERIMENTAL=y. Squashed commit of the following: net/route: The current delroute design depends on file truncation. However, NuttX does not currently support truncate. Alternative, more complex designs are possible but not implemented. At present the file routing table are otherwise functional but the delroute logic is disabled via CONFIG_EXPERIMENTAL. Enable it only if you plan to fix it. net/route: Fix some issues with locking routing table files. net/route: Add partial implementation of delroute for the case where the routing table is in a file. net/route: Add support for seeking to positions in the routing table. net/route: Add net_addroute_ipv4/6() using a file-based routing table. net/route: Add net_foreach_ipv4/4() using a file-based routing table. net/route: Initial build, configuration, and fs utilies to support routing tables in a file.
2017-09-29 16:33:36 +02:00
ssize_t nwritten;
ssize_t nread;
off_t pos;
int nentries;
int index;
int ret;
/* We must lock out other accesses to the routing table while we remove
* entry
*/
ret = net_lockroute_ipv4();
if (ret < 0)
{
nerr("ERROR: net_lockroute_ipv4 faled: %d\n", ret);
return ret;
This commit adds support for routing tables in files in a file system. This might be useful for customized, per-unit routing tables. There are two issues with it however: 1. Reading from file system on a per packet basis could be slow. I think it probably should have a small, in-memory cache of most frequently used routes for good problem. 2. Currently the delroute logic is disabled due to a problem with the design. NuttX does not currently support truncate(). Therefore, it is not possible to delete entries from the routing table file. In this current implementation, that leaves the last entry intact at the end of the file. An alternative design might include a tag on each record to indicate if the record is valid or not. That would work but would add complexity to the other routing table functions. The existing implementation is available for testing purposes only if CONFIG_EXPERIMENTAL=y. Squashed commit of the following: net/route: The current delroute design depends on file truncation. However, NuttX does not currently support truncate. Alternative, more complex designs are possible but not implemented. At present the file routing table are otherwise functional but the delroute logic is disabled via CONFIG_EXPERIMENTAL. Enable it only if you plan to fix it. net/route: Fix some issues with locking routing table files. net/route: Add partial implementation of delroute for the case where the routing table is in a file. net/route: Add support for seeking to positions in the routing table. net/route: Add net_addroute_ipv4/6() using a file-based routing table. net/route: Add net_foreach_ipv4/4() using a file-based routing table. net/route: Initial build, configuration, and fs utilies to support routing tables in a file.
2017-09-29 16:33:36 +02:00
}
/* Get the size of the routing table (in entries) */
This commit adds support for routing tables in files in a file system. This might be useful for customized, per-unit routing tables. There are two issues with it however: 1. Reading from file system on a per packet basis could be slow. I think it probably should have a small, in-memory cache of most frequently used routes for good problem. 2. Currently the delroute logic is disabled due to a problem with the design. NuttX does not currently support truncate(). Therefore, it is not possible to delete entries from the routing table file. In this current implementation, that leaves the last entry intact at the end of the file. An alternative design might include a tag on each record to indicate if the record is valid or not. That would work but would add complexity to the other routing table functions. The existing implementation is available for testing purposes only if CONFIG_EXPERIMENTAL=y. Squashed commit of the following: net/route: The current delroute design depends on file truncation. However, NuttX does not currently support truncate. Alternative, more complex designs are possible but not implemented. At present the file routing table are otherwise functional but the delroute logic is disabled via CONFIG_EXPERIMENTAL. Enable it only if you plan to fix it. net/route: Fix some issues with locking routing table files. net/route: Add partial implementation of delroute for the case where the routing table is in a file. net/route: Add support for seeking to positions in the routing table. net/route: Add net_addroute_ipv4/6() using a file-based routing table. net/route: Add net_foreach_ipv4/4() using a file-based routing table. net/route: Initial build, configuration, and fs utilies to support routing tables in a file.
2017-09-29 16:33:36 +02:00
nentries = net_routesize_ipv4();
if (nentries < 0)
{
ret = nentries;
goto errout_with_lock;
}
else if (nentries == 0)
{
ret = -ENOENT;
goto errout_with_lock;
}
/* Set up the comparison structure */
net_ipv4addr_copy(match.target, target);
net_ipv4addr_copy(match.netmask, netmask);
match.index = 0;
/* Then find the index into the routing table where the match can be
* found
*/
This commit adds support for routing tables in files in a file system. This might be useful for customized, per-unit routing tables. There are two issues with it however: 1. Reading from file system on a per packet basis could be slow. I think it probably should have a small, in-memory cache of most frequently used routes for good problem. 2. Currently the delroute logic is disabled due to a problem with the design. NuttX does not currently support truncate(). Therefore, it is not possible to delete entries from the routing table file. In this current implementation, that leaves the last entry intact at the end of the file. An alternative design might include a tag on each record to indicate if the record is valid or not. That would work but would add complexity to the other routing table functions. The existing implementation is available for testing purposes only if CONFIG_EXPERIMENTAL=y. Squashed commit of the following: net/route: The current delroute design depends on file truncation. However, NuttX does not currently support truncate. Alternative, more complex designs are possible but not implemented. At present the file routing table are otherwise functional but the delroute logic is disabled via CONFIG_EXPERIMENTAL. Enable it only if you plan to fix it. net/route: Fix some issues with locking routing table files. net/route: Add partial implementation of delroute for the case where the routing table is in a file. net/route: Add support for seeking to positions in the routing table. net/route: Add net_addroute_ipv4/6() using a file-based routing table. net/route: Add net_foreach_ipv4/4() using a file-based routing table. net/route: Initial build, configuration, and fs utilies to support routing tables in a file.
2017-09-29 16:33:36 +02:00
ret = net_foreachroute_ipv4(net_match_ipv4, &match);
if (ret < 0)
{
/* And error occurred */
goto errout_with_lock;
}
else if (ret == 0)
{
/* No match found */
ret = -ENOENT;
goto errout_with_lock;
}
/* Open the routing table for read/write access */
ret = net_openroute_ipv4(O_RDWR, &fshandle);
if (ret < 0)
{
nerr("ERROR: Could not open IPv4 routing table: %d\n", ret);
goto errout_with_lock;
This commit adds support for routing tables in files in a file system. This might be useful for customized, per-unit routing tables. There are two issues with it however: 1. Reading from file system on a per packet basis could be slow. I think it probably should have a small, in-memory cache of most frequently used routes for good problem. 2. Currently the delroute logic is disabled due to a problem with the design. NuttX does not currently support truncate(). Therefore, it is not possible to delete entries from the routing table file. In this current implementation, that leaves the last entry intact at the end of the file. An alternative design might include a tag on each record to indicate if the record is valid or not. That would work but would add complexity to the other routing table functions. The existing implementation is available for testing purposes only if CONFIG_EXPERIMENTAL=y. Squashed commit of the following: net/route: The current delroute design depends on file truncation. However, NuttX does not currently support truncate. Alternative, more complex designs are possible but not implemented. At present the file routing table are otherwise functional but the delroute logic is disabled via CONFIG_EXPERIMENTAL. Enable it only if you plan to fix it. net/route: Fix some issues with locking routing table files. net/route: Add partial implementation of delroute for the case where the routing table is in a file. net/route: Add support for seeking to positions in the routing table. net/route: Add net_addroute_ipv4/6() using a file-based routing table. net/route: Add net_foreach_ipv4/4() using a file-based routing table. net/route: Initial build, configuration, and fs utilies to support routing tables in a file.
2017-09-29 16:33:36 +02:00
}
#ifdef CONFIG_ROUTE_IPv4_CACHEROUTE
/* We are committed to modifying the routing table. Flush the in-memory
* routing table cache.
*/
net_flushcache_ipv4();
#endif
This commit adds support for routing tables in files in a file system. This might be useful for customized, per-unit routing tables. There are two issues with it however: 1. Reading from file system on a per packet basis could be slow. I think it probably should have a small, in-memory cache of most frequently used routes for good problem. 2. Currently the delroute logic is disabled due to a problem with the design. NuttX does not currently support truncate(). Therefore, it is not possible to delete entries from the routing table file. In this current implementation, that leaves the last entry intact at the end of the file. An alternative design might include a tag on each record to indicate if the record is valid or not. That would work but would add complexity to the other routing table functions. The existing implementation is available for testing purposes only if CONFIG_EXPERIMENTAL=y. Squashed commit of the following: net/route: The current delroute design depends on file truncation. However, NuttX does not currently support truncate. Alternative, more complex designs are possible but not implemented. At present the file routing table are otherwise functional but the delroute logic is disabled via CONFIG_EXPERIMENTAL. Enable it only if you plan to fix it. net/route: Fix some issues with locking routing table files. net/route: Add partial implementation of delroute for the case where the routing table is in a file. net/route: Add support for seeking to positions in the routing table. net/route: Add net_addroute_ipv4/6() using a file-based routing table. net/route: Add net_foreach_ipv4/4() using a file-based routing table. net/route: Initial build, configuration, and fs utilies to support routing tables in a file.
2017-09-29 16:33:36 +02:00
/* Loop, copying each entry, to the previous entry thus removing the entry
* to be deleted.
*/
for (index = match.index + 1; index < nentries; index++)
{
/* Seek to the current entry to be moved */
pos = net_seekroute_ipv4(&fshandle, index);
if (pos < 0)
{
nerr("ERROR: net_readroute_ipv4 failed: %ld\n", (long)pos);
ret = (int)pos;
This commit adds support for routing tables in files in a file system. This might be useful for customized, per-unit routing tables. There are two issues with it however: 1. Reading from file system on a per packet basis could be slow. I think it probably should have a small, in-memory cache of most frequently used routes for good problem. 2. Currently the delroute logic is disabled due to a problem with the design. NuttX does not currently support truncate(). Therefore, it is not possible to delete entries from the routing table file. In this current implementation, that leaves the last entry intact at the end of the file. An alternative design might include a tag on each record to indicate if the record is valid or not. That would work but would add complexity to the other routing table functions. The existing implementation is available for testing purposes only if CONFIG_EXPERIMENTAL=y. Squashed commit of the following: net/route: The current delroute design depends on file truncation. However, NuttX does not currently support truncate. Alternative, more complex designs are possible but not implemented. At present the file routing table are otherwise functional but the delroute logic is disabled via CONFIG_EXPERIMENTAL. Enable it only if you plan to fix it. net/route: Fix some issues with locking routing table files. net/route: Add partial implementation of delroute for the case where the routing table is in a file. net/route: Add support for seeking to positions in the routing table. net/route: Add net_addroute_ipv4/6() using a file-based routing table. net/route: Add net_foreach_ipv4/4() using a file-based routing table. net/route: Initial build, configuration, and fs utilies to support routing tables in a file.
2017-09-29 16:33:36 +02:00
goto errout_with_fshandle;
}
/* Read the routing table entry at this position */
nread = net_readroute_ipv4(&fshandle, &route);
if (nread < 0)
{
nerr("ERROR: net_readroute_ipv4 failed: %ld\n", (long)nread);
ret = (int)nread;
goto errout_with_fshandle;
}
else if (nread == 0)
{
nerr("ERROR: Unexpected end of file\n");
This commit adds support for routing tables in files in a file system. This might be useful for customized, per-unit routing tables. There are two issues with it however: 1. Reading from file system on a per packet basis could be slow. I think it probably should have a small, in-memory cache of most frequently used routes for good problem. 2. Currently the delroute logic is disabled due to a problem with the design. NuttX does not currently support truncate(). Therefore, it is not possible to delete entries from the routing table file. In this current implementation, that leaves the last entry intact at the end of the file. An alternative design might include a tag on each record to indicate if the record is valid or not. That would work but would add complexity to the other routing table functions. The existing implementation is available for testing purposes only if CONFIG_EXPERIMENTAL=y. Squashed commit of the following: net/route: The current delroute design depends on file truncation. However, NuttX does not currently support truncate. Alternative, more complex designs are possible but not implemented. At present the file routing table are otherwise functional but the delroute logic is disabled via CONFIG_EXPERIMENTAL. Enable it only if you plan to fix it. net/route: Fix some issues with locking routing table files. net/route: Add partial implementation of delroute for the case where the routing table is in a file. net/route: Add support for seeking to positions in the routing table. net/route: Add net_addroute_ipv4/6() using a file-based routing table. net/route: Add net_foreach_ipv4/4() using a file-based routing table. net/route: Initial build, configuration, and fs utilies to support routing tables in a file.
2017-09-29 16:33:36 +02:00
ret = -EINVAL;
goto errout_with_fshandle;
}
/* Seek to the previous entry to be replaced */
pos = net_seekroute_ipv4(&fshandle, index - 1);
if (pos < 0)
{
nerr("ERROR: net_readroute_ipv4 failed: %ld\n", (long)pos);
ret = (int)pos;
This commit adds support for routing tables in files in a file system. This might be useful for customized, per-unit routing tables. There are two issues with it however: 1. Reading from file system on a per packet basis could be slow. I think it probably should have a small, in-memory cache of most frequently used routes for good problem. 2. Currently the delroute logic is disabled due to a problem with the design. NuttX does not currently support truncate(). Therefore, it is not possible to delete entries from the routing table file. In this current implementation, that leaves the last entry intact at the end of the file. An alternative design might include a tag on each record to indicate if the record is valid or not. That would work but would add complexity to the other routing table functions. The existing implementation is available for testing purposes only if CONFIG_EXPERIMENTAL=y. Squashed commit of the following: net/route: The current delroute design depends on file truncation. However, NuttX does not currently support truncate. Alternative, more complex designs are possible but not implemented. At present the file routing table are otherwise functional but the delroute logic is disabled via CONFIG_EXPERIMENTAL. Enable it only if you plan to fix it. net/route: Fix some issues with locking routing table files. net/route: Add partial implementation of delroute for the case where the routing table is in a file. net/route: Add support for seeking to positions in the routing table. net/route: Add net_addroute_ipv4/6() using a file-based routing table. net/route: Add net_foreach_ipv4/4() using a file-based routing table. net/route: Initial build, configuration, and fs utilies to support routing tables in a file.
2017-09-29 16:33:36 +02:00
goto errout_with_fshandle;
}
/* Now write the record to its new location */
nwritten = net_writeroute_ipv4(&fshandle, &route);
if (nwritten < 0)
{
nerr("ERROR: net_readroute_ipv4 failed: %ld\n", (long)nwritten);
ret = (int)nwritten;
goto errout_with_fshandle;
}
}
/* Now truncate the one duplicate entry at the end of the file. This may
* result in a zero length file.
*/
filesize = (nentries - 1) * sizeof(struct net_route_ipv4_s);
ret = file_truncate(&fshandle, filesize);
This commit adds support for routing tables in files in a file system. This might be useful for customized, per-unit routing tables. There are two issues with it however: 1. Reading from file system on a per packet basis could be slow. I think it probably should have a small, in-memory cache of most frequently used routes for good problem. 2. Currently the delroute logic is disabled due to a problem with the design. NuttX does not currently support truncate(). Therefore, it is not possible to delete entries from the routing table file. In this current implementation, that leaves the last entry intact at the end of the file. An alternative design might include a tag on each record to indicate if the record is valid or not. That would work but would add complexity to the other routing table functions. The existing implementation is available for testing purposes only if CONFIG_EXPERIMENTAL=y. Squashed commit of the following: net/route: The current delroute design depends on file truncation. However, NuttX does not currently support truncate. Alternative, more complex designs are possible but not implemented. At present the file routing table are otherwise functional but the delroute logic is disabled via CONFIG_EXPERIMENTAL. Enable it only if you plan to fix it. net/route: Fix some issues with locking routing table files. net/route: Add partial implementation of delroute for the case where the routing table is in a file. net/route: Add support for seeking to positions in the routing table. net/route: Add net_addroute_ipv4/6() using a file-based routing table. net/route: Add net_foreach_ipv4/4() using a file-based routing table. net/route: Initial build, configuration, and fs utilies to support routing tables in a file.
2017-09-29 16:33:36 +02:00
netlink_route_notify(&match, RTM_DELROUTE, AF_INET);
This commit adds support for routing tables in files in a file system. This might be useful for customized, per-unit routing tables. There are two issues with it however: 1. Reading from file system on a per packet basis could be slow. I think it probably should have a small, in-memory cache of most frequently used routes for good problem. 2. Currently the delroute logic is disabled due to a problem with the design. NuttX does not currently support truncate(). Therefore, it is not possible to delete entries from the routing table file. In this current implementation, that leaves the last entry intact at the end of the file. An alternative design might include a tag on each record to indicate if the record is valid or not. That would work but would add complexity to the other routing table functions. The existing implementation is available for testing purposes only if CONFIG_EXPERIMENTAL=y. Squashed commit of the following: net/route: The current delroute design depends on file truncation. However, NuttX does not currently support truncate. Alternative, more complex designs are possible but not implemented. At present the file routing table are otherwise functional but the delroute logic is disabled via CONFIG_EXPERIMENTAL. Enable it only if you plan to fix it. net/route: Fix some issues with locking routing table files. net/route: Add partial implementation of delroute for the case where the routing table is in a file. net/route: Add support for seeking to positions in the routing table. net/route: Add net_addroute_ipv4/6() using a file-based routing table. net/route: Add net_foreach_ipv4/4() using a file-based routing table. net/route: Initial build, configuration, and fs utilies to support routing tables in a file.
2017-09-29 16:33:36 +02:00
errout_with_fshandle:
net_closeroute_ipv4(&fshandle);
This commit adds support for routing tables in files in a file system. This might be useful for customized, per-unit routing tables. There are two issues with it however: 1. Reading from file system on a per packet basis could be slow. I think it probably should have a small, in-memory cache of most frequently used routes for good problem. 2. Currently the delroute logic is disabled due to a problem with the design. NuttX does not currently support truncate(). Therefore, it is not possible to delete entries from the routing table file. In this current implementation, that leaves the last entry intact at the end of the file. An alternative design might include a tag on each record to indicate if the record is valid or not. That would work but would add complexity to the other routing table functions. The existing implementation is available for testing purposes only if CONFIG_EXPERIMENTAL=y. Squashed commit of the following: net/route: The current delroute design depends on file truncation. However, NuttX does not currently support truncate. Alternative, more complex designs are possible but not implemented. At present the file routing table are otherwise functional but the delroute logic is disabled via CONFIG_EXPERIMENTAL. Enable it only if you plan to fix it. net/route: Fix some issues with locking routing table files. net/route: Add partial implementation of delroute for the case where the routing table is in a file. net/route: Add support for seeking to positions in the routing table. net/route: Add net_addroute_ipv4/6() using a file-based routing table. net/route: Add net_foreach_ipv4/4() using a file-based routing table. net/route: Initial build, configuration, and fs utilies to support routing tables in a file.
2017-09-29 16:33:36 +02:00
errout_with_lock:
net_unlockroute_ipv4();
This commit adds support for routing tables in files in a file system. This might be useful for customized, per-unit routing tables. There are two issues with it however: 1. Reading from file system on a per packet basis could be slow. I think it probably should have a small, in-memory cache of most frequently used routes for good problem. 2. Currently the delroute logic is disabled due to a problem with the design. NuttX does not currently support truncate(). Therefore, it is not possible to delete entries from the routing table file. In this current implementation, that leaves the last entry intact at the end of the file. An alternative design might include a tag on each record to indicate if the record is valid or not. That would work but would add complexity to the other routing table functions. The existing implementation is available for testing purposes only if CONFIG_EXPERIMENTAL=y. Squashed commit of the following: net/route: The current delroute design depends on file truncation. However, NuttX does not currently support truncate. Alternative, more complex designs are possible but not implemented. At present the file routing table are otherwise functional but the delroute logic is disabled via CONFIG_EXPERIMENTAL. Enable it only if you plan to fix it. net/route: Fix some issues with locking routing table files. net/route: Add partial implementation of delroute for the case where the routing table is in a file. net/route: Add support for seeking to positions in the routing table. net/route: Add net_addroute_ipv4/6() using a file-based routing table. net/route: Add net_foreach_ipv4/4() using a file-based routing table. net/route: Initial build, configuration, and fs utilies to support routing tables in a file.
2017-09-29 16:33:36 +02:00
return ret;
}
#endif
#ifdef CONFIG_ROUTE_IPv6_FILEROUTE
int net_delroute_ipv6(net_ipv6addr_t target, net_ipv6addr_t netmask)
{
struct route_match_ipv6_s match;
struct net_route_ipv6_s route;
struct file fshandle;
off_t filesize;
This commit adds support for routing tables in files in a file system. This might be useful for customized, per-unit routing tables. There are two issues with it however: 1. Reading from file system on a per packet basis could be slow. I think it probably should have a small, in-memory cache of most frequently used routes for good problem. 2. Currently the delroute logic is disabled due to a problem with the design. NuttX does not currently support truncate(). Therefore, it is not possible to delete entries from the routing table file. In this current implementation, that leaves the last entry intact at the end of the file. An alternative design might include a tag on each record to indicate if the record is valid or not. That would work but would add complexity to the other routing table functions. The existing implementation is available for testing purposes only if CONFIG_EXPERIMENTAL=y. Squashed commit of the following: net/route: The current delroute design depends on file truncation. However, NuttX does not currently support truncate. Alternative, more complex designs are possible but not implemented. At present the file routing table are otherwise functional but the delroute logic is disabled via CONFIG_EXPERIMENTAL. Enable it only if you plan to fix it. net/route: Fix some issues with locking routing table files. net/route: Add partial implementation of delroute for the case where the routing table is in a file. net/route: Add support for seeking to positions in the routing table. net/route: Add net_addroute_ipv4/6() using a file-based routing table. net/route: Add net_foreach_ipv4/4() using a file-based routing table. net/route: Initial build, configuration, and fs utilies to support routing tables in a file.
2017-09-29 16:33:36 +02:00
ssize_t nwritten;
ssize_t nread;
off_t pos;
int nentries;
int index;
int ret;
/* We must lock out other accesses to the routing table while we remove
* entry
*/
ret = net_lockroute_ipv6();
if (ret < 0)
{
nerr("ERROR: net_lockroute_ipv6 failed: %d\n", ret);
return ret;
This commit adds support for routing tables in files in a file system. This might be useful for customized, per-unit routing tables. There are two issues with it however: 1. Reading from file system on a per packet basis could be slow. I think it probably should have a small, in-memory cache of most frequently used routes for good problem. 2. Currently the delroute logic is disabled due to a problem with the design. NuttX does not currently support truncate(). Therefore, it is not possible to delete entries from the routing table file. In this current implementation, that leaves the last entry intact at the end of the file. An alternative design might include a tag on each record to indicate if the record is valid or not. That would work but would add complexity to the other routing table functions. The existing implementation is available for testing purposes only if CONFIG_EXPERIMENTAL=y. Squashed commit of the following: net/route: The current delroute design depends on file truncation. However, NuttX does not currently support truncate. Alternative, more complex designs are possible but not implemented. At present the file routing table are otherwise functional but the delroute logic is disabled via CONFIG_EXPERIMENTAL. Enable it only if you plan to fix it. net/route: Fix some issues with locking routing table files. net/route: Add partial implementation of delroute for the case where the routing table is in a file. net/route: Add support for seeking to positions in the routing table. net/route: Add net_addroute_ipv4/6() using a file-based routing table. net/route: Add net_foreach_ipv4/4() using a file-based routing table. net/route: Initial build, configuration, and fs utilies to support routing tables in a file.
2017-09-29 16:33:36 +02:00
}
/* Get the size of the routing table (in entries) */
This commit adds support for routing tables in files in a file system. This might be useful for customized, per-unit routing tables. There are two issues with it however: 1. Reading from file system on a per packet basis could be slow. I think it probably should have a small, in-memory cache of most frequently used routes for good problem. 2. Currently the delroute logic is disabled due to a problem with the design. NuttX does not currently support truncate(). Therefore, it is not possible to delete entries from the routing table file. In this current implementation, that leaves the last entry intact at the end of the file. An alternative design might include a tag on each record to indicate if the record is valid or not. That would work but would add complexity to the other routing table functions. The existing implementation is available for testing purposes only if CONFIG_EXPERIMENTAL=y. Squashed commit of the following: net/route: The current delroute design depends on file truncation. However, NuttX does not currently support truncate. Alternative, more complex designs are possible but not implemented. At present the file routing table are otherwise functional but the delroute logic is disabled via CONFIG_EXPERIMENTAL. Enable it only if you plan to fix it. net/route: Fix some issues with locking routing table files. net/route: Add partial implementation of delroute for the case where the routing table is in a file. net/route: Add support for seeking to positions in the routing table. net/route: Add net_addroute_ipv4/6() using a file-based routing table. net/route: Add net_foreach_ipv4/4() using a file-based routing table. net/route: Initial build, configuration, and fs utilies to support routing tables in a file.
2017-09-29 16:33:36 +02:00
nentries = net_routesize_ipv6();
if (nentries < 0)
{
ret = nentries;
goto errout_with_lock;
}
else if (nentries == 0)
{
ret = -ENOENT;
goto errout_with_lock;
}
/* Set up the comparison structure */
net_ipv6addr_copy(match.target, target);
net_ipv6addr_copy(match.netmask, netmask);
match.index = 0;
/* Then find the index into the routing table where the match can be
* found
*/
This commit adds support for routing tables in files in a file system. This might be useful for customized, per-unit routing tables. There are two issues with it however: 1. Reading from file system on a per packet basis could be slow. I think it probably should have a small, in-memory cache of most frequently used routes for good problem. 2. Currently the delroute logic is disabled due to a problem with the design. NuttX does not currently support truncate(). Therefore, it is not possible to delete entries from the routing table file. In this current implementation, that leaves the last entry intact at the end of the file. An alternative design might include a tag on each record to indicate if the record is valid or not. That would work but would add complexity to the other routing table functions. The existing implementation is available for testing purposes only if CONFIG_EXPERIMENTAL=y. Squashed commit of the following: net/route: The current delroute design depends on file truncation. However, NuttX does not currently support truncate. Alternative, more complex designs are possible but not implemented. At present the file routing table are otherwise functional but the delroute logic is disabled via CONFIG_EXPERIMENTAL. Enable it only if you plan to fix it. net/route: Fix some issues with locking routing table files. net/route: Add partial implementation of delroute for the case where the routing table is in a file. net/route: Add support for seeking to positions in the routing table. net/route: Add net_addroute_ipv4/6() using a file-based routing table. net/route: Add net_foreach_ipv4/4() using a file-based routing table. net/route: Initial build, configuration, and fs utilies to support routing tables in a file.
2017-09-29 16:33:36 +02:00
ret = net_foreachroute_ipv6(net_match_ipv6, &match);
if (ret < 0)
{
/* And error occurred */
ret = ret;
goto errout_with_lock;
}
else if (ret == 0)
{
/* No match found */
ret = -ENOENT;
goto errout_with_lock;
}
/* Open the routing table for read/write access */
ret = net_openroute_ipv6(O_RDWR, &fshandle);
if (ret < 0)
{
nerr("ERROR: Could not open IPv6 routing table: %d\n", ret);
goto errout_with_lock;
}
#ifdef CONFIG_ROUTE_IPv6_CACHEROUTE
/* We are committed to modifying the routing table. Flush the in-memory
* routing table cache.
*/
net_flushcache_ipv6();
#endif
This commit adds support for routing tables in files in a file system. This might be useful for customized, per-unit routing tables. There are two issues with it however: 1. Reading from file system on a per packet basis could be slow. I think it probably should have a small, in-memory cache of most frequently used routes for good problem. 2. Currently the delroute logic is disabled due to a problem with the design. NuttX does not currently support truncate(). Therefore, it is not possible to delete entries from the routing table file. In this current implementation, that leaves the last entry intact at the end of the file. An alternative design might include a tag on each record to indicate if the record is valid or not. That would work but would add complexity to the other routing table functions. The existing implementation is available for testing purposes only if CONFIG_EXPERIMENTAL=y. Squashed commit of the following: net/route: The current delroute design depends on file truncation. However, NuttX does not currently support truncate. Alternative, more complex designs are possible but not implemented. At present the file routing table are otherwise functional but the delroute logic is disabled via CONFIG_EXPERIMENTAL. Enable it only if you plan to fix it. net/route: Fix some issues with locking routing table files. net/route: Add partial implementation of delroute for the case where the routing table is in a file. net/route: Add support for seeking to positions in the routing table. net/route: Add net_addroute_ipv4/6() using a file-based routing table. net/route: Add net_foreach_ipv4/4() using a file-based routing table. net/route: Initial build, configuration, and fs utilies to support routing tables in a file.
2017-09-29 16:33:36 +02:00
/* Loop, copying each entry, to the previous entry thus removing the entry
* to be deleted.
*/
for (index = match.index + 1; index < nentries; index++)
{
/* Seek to the current entry to be moved */
pos = net_seekroute_ipv6(&fshandle, index);
if (pos < 0)
{
nerr("ERROR: net_readroute_ipv6 failed: %ld\n", (long)pos);
ret = (int)pos;
This commit adds support for routing tables in files in a file system. This might be useful for customized, per-unit routing tables. There are two issues with it however: 1. Reading from file system on a per packet basis could be slow. I think it probably should have a small, in-memory cache of most frequently used routes for good problem. 2. Currently the delroute logic is disabled due to a problem with the design. NuttX does not currently support truncate(). Therefore, it is not possible to delete entries from the routing table file. In this current implementation, that leaves the last entry intact at the end of the file. An alternative design might include a tag on each record to indicate if the record is valid or not. That would work but would add complexity to the other routing table functions. The existing implementation is available for testing purposes only if CONFIG_EXPERIMENTAL=y. Squashed commit of the following: net/route: The current delroute design depends on file truncation. However, NuttX does not currently support truncate. Alternative, more complex designs are possible but not implemented. At present the file routing table are otherwise functional but the delroute logic is disabled via CONFIG_EXPERIMENTAL. Enable it only if you plan to fix it. net/route: Fix some issues with locking routing table files. net/route: Add partial implementation of delroute for the case where the routing table is in a file. net/route: Add support for seeking to positions in the routing table. net/route: Add net_addroute_ipv4/6() using a file-based routing table. net/route: Add net_foreach_ipv4/4() using a file-based routing table. net/route: Initial build, configuration, and fs utilies to support routing tables in a file.
2017-09-29 16:33:36 +02:00
goto errout_with_fshandle;
}
/* Read the routing table entry at this position */
nread = net_readroute_ipv6(&fshandle, &route);
if (nread < 0)
{
nerr("ERROR: net_readroute_ipv6 failed: %ld\n", (long)nread);
ret = (int)nread;
goto errout_with_fshandle;
}
else if (nread == 0)
{
nerr("ERROR: Unexpected end of file\n");
This commit adds support for routing tables in files in a file system. This might be useful for customized, per-unit routing tables. There are two issues with it however: 1. Reading from file system on a per packet basis could be slow. I think it probably should have a small, in-memory cache of most frequently used routes for good problem. 2. Currently the delroute logic is disabled due to a problem with the design. NuttX does not currently support truncate(). Therefore, it is not possible to delete entries from the routing table file. In this current implementation, that leaves the last entry intact at the end of the file. An alternative design might include a tag on each record to indicate if the record is valid or not. That would work but would add complexity to the other routing table functions. The existing implementation is available for testing purposes only if CONFIG_EXPERIMENTAL=y. Squashed commit of the following: net/route: The current delroute design depends on file truncation. However, NuttX does not currently support truncate. Alternative, more complex designs are possible but not implemented. At present the file routing table are otherwise functional but the delroute logic is disabled via CONFIG_EXPERIMENTAL. Enable it only if you plan to fix it. net/route: Fix some issues with locking routing table files. net/route: Add partial implementation of delroute for the case where the routing table is in a file. net/route: Add support for seeking to positions in the routing table. net/route: Add net_addroute_ipv4/6() using a file-based routing table. net/route: Add net_foreach_ipv4/4() using a file-based routing table. net/route: Initial build, configuration, and fs utilies to support routing tables in a file.
2017-09-29 16:33:36 +02:00
ret = -EINVAL;
goto errout_with_fshandle;
}
/* Seek to the previous entry to be replaced */
pos = net_seekroute_ipv6(&fshandle, index - 1);
if (pos < 0)
{
nerr("ERROR: net_readroute_ipv6 failed: %ld\n", (long)pos);
ret = (int)pos;
This commit adds support for routing tables in files in a file system. This might be useful for customized, per-unit routing tables. There are two issues with it however: 1. Reading from file system on a per packet basis could be slow. I think it probably should have a small, in-memory cache of most frequently used routes for good problem. 2. Currently the delroute logic is disabled due to a problem with the design. NuttX does not currently support truncate(). Therefore, it is not possible to delete entries from the routing table file. In this current implementation, that leaves the last entry intact at the end of the file. An alternative design might include a tag on each record to indicate if the record is valid or not. That would work but would add complexity to the other routing table functions. The existing implementation is available for testing purposes only if CONFIG_EXPERIMENTAL=y. Squashed commit of the following: net/route: The current delroute design depends on file truncation. However, NuttX does not currently support truncate. Alternative, more complex designs are possible but not implemented. At present the file routing table are otherwise functional but the delroute logic is disabled via CONFIG_EXPERIMENTAL. Enable it only if you plan to fix it. net/route: Fix some issues with locking routing table files. net/route: Add partial implementation of delroute for the case where the routing table is in a file. net/route: Add support for seeking to positions in the routing table. net/route: Add net_addroute_ipv4/6() using a file-based routing table. net/route: Add net_foreach_ipv4/4() using a file-based routing table. net/route: Initial build, configuration, and fs utilies to support routing tables in a file.
2017-09-29 16:33:36 +02:00
goto errout_with_fshandle;
}
/* Now write the record to its new location */
nwritten = net_writeroute_ipv6(&fshandle, &route);
if (nwritten < 0)
{
nerr("ERROR: net_readroute_ipv6 failed: %ld\n", (long)nwritten);
ret = (int)nwritten;
goto errout_with_fshandle;
}
}
/* Now truncate the one duplicate entry at the end of the file. This may
* result in a zero length file.
*/
filesize = (nentries - 1) * sizeof(struct net_route_ipv6_s);
ret = file_truncate(&fshandle, filesize);
This commit adds support for routing tables in files in a file system. This might be useful for customized, per-unit routing tables. There are two issues with it however: 1. Reading from file system on a per packet basis could be slow. I think it probably should have a small, in-memory cache of most frequently used routes for good problem. 2. Currently the delroute logic is disabled due to a problem with the design. NuttX does not currently support truncate(). Therefore, it is not possible to delete entries from the routing table file. In this current implementation, that leaves the last entry intact at the end of the file. An alternative design might include a tag on each record to indicate if the record is valid or not. That would work but would add complexity to the other routing table functions. The existing implementation is available for testing purposes only if CONFIG_EXPERIMENTAL=y. Squashed commit of the following: net/route: The current delroute design depends on file truncation. However, NuttX does not currently support truncate. Alternative, more complex designs are possible but not implemented. At present the file routing table are otherwise functional but the delroute logic is disabled via CONFIG_EXPERIMENTAL. Enable it only if you plan to fix it. net/route: Fix some issues with locking routing table files. net/route: Add partial implementation of delroute for the case where the routing table is in a file. net/route: Add support for seeking to positions in the routing table. net/route: Add net_addroute_ipv4/6() using a file-based routing table. net/route: Add net_foreach_ipv4/4() using a file-based routing table. net/route: Initial build, configuration, and fs utilies to support routing tables in a file.
2017-09-29 16:33:36 +02:00
netlink_route_notify(&match, RTM_DELROUTE, AF_INET6);
This commit adds support for routing tables in files in a file system. This might be useful for customized, per-unit routing tables. There are two issues with it however: 1. Reading from file system on a per packet basis could be slow. I think it probably should have a small, in-memory cache of most frequently used routes for good problem. 2. Currently the delroute logic is disabled due to a problem with the design. NuttX does not currently support truncate(). Therefore, it is not possible to delete entries from the routing table file. In this current implementation, that leaves the last entry intact at the end of the file. An alternative design might include a tag on each record to indicate if the record is valid or not. That would work but would add complexity to the other routing table functions. The existing implementation is available for testing purposes only if CONFIG_EXPERIMENTAL=y. Squashed commit of the following: net/route: The current delroute design depends on file truncation. However, NuttX does not currently support truncate. Alternative, more complex designs are possible but not implemented. At present the file routing table are otherwise functional but the delroute logic is disabled via CONFIG_EXPERIMENTAL. Enable it only if you plan to fix it. net/route: Fix some issues with locking routing table files. net/route: Add partial implementation of delroute for the case where the routing table is in a file. net/route: Add support for seeking to positions in the routing table. net/route: Add net_addroute_ipv4/6() using a file-based routing table. net/route: Add net_foreach_ipv4/4() using a file-based routing table. net/route: Initial build, configuration, and fs utilies to support routing tables in a file.
2017-09-29 16:33:36 +02:00
errout_with_fshandle:
net_closeroute_ipv6(&fshandle);
This commit adds support for routing tables in files in a file system. This might be useful for customized, per-unit routing tables. There are two issues with it however: 1. Reading from file system on a per packet basis could be slow. I think it probably should have a small, in-memory cache of most frequently used routes for good problem. 2. Currently the delroute logic is disabled due to a problem with the design. NuttX does not currently support truncate(). Therefore, it is not possible to delete entries from the routing table file. In this current implementation, that leaves the last entry intact at the end of the file. An alternative design might include a tag on each record to indicate if the record is valid or not. That would work but would add complexity to the other routing table functions. The existing implementation is available for testing purposes only if CONFIG_EXPERIMENTAL=y. Squashed commit of the following: net/route: The current delroute design depends on file truncation. However, NuttX does not currently support truncate. Alternative, more complex designs are possible but not implemented. At present the file routing table are otherwise functional but the delroute logic is disabled via CONFIG_EXPERIMENTAL. Enable it only if you plan to fix it. net/route: Fix some issues with locking routing table files. net/route: Add partial implementation of delroute for the case where the routing table is in a file. net/route: Add support for seeking to positions in the routing table. net/route: Add net_addroute_ipv4/6() using a file-based routing table. net/route: Add net_foreach_ipv4/4() using a file-based routing table. net/route: Initial build, configuration, and fs utilies to support routing tables in a file.
2017-09-29 16:33:36 +02:00
errout_with_lock:
net_unlockroute_ipv6();
This commit adds support for routing tables in files in a file system. This might be useful for customized, per-unit routing tables. There are two issues with it however: 1. Reading from file system on a per packet basis could be slow. I think it probably should have a small, in-memory cache of most frequently used routes for good problem. 2. Currently the delroute logic is disabled due to a problem with the design. NuttX does not currently support truncate(). Therefore, it is not possible to delete entries from the routing table file. In this current implementation, that leaves the last entry intact at the end of the file. An alternative design might include a tag on each record to indicate if the record is valid or not. That would work but would add complexity to the other routing table functions. The existing implementation is available for testing purposes only if CONFIG_EXPERIMENTAL=y. Squashed commit of the following: net/route: The current delroute design depends on file truncation. However, NuttX does not currently support truncate. Alternative, more complex designs are possible but not implemented. At present the file routing table are otherwise functional but the delroute logic is disabled via CONFIG_EXPERIMENTAL. Enable it only if you plan to fix it. net/route: Fix some issues with locking routing table files. net/route: Add partial implementation of delroute for the case where the routing table is in a file. net/route: Add support for seeking to positions in the routing table. net/route: Add net_addroute_ipv4/6() using a file-based routing table. net/route: Add net_foreach_ipv4/4() using a file-based routing table. net/route: Initial build, configuration, and fs utilies to support routing tables in a file.
2017-09-29 16:33:36 +02:00
return ret;
}
#endif
#endif /* CONFIG_ROUTE_IPv4_FILEROUTE || CONFIG_ROUTE_IPv6_FILEROUTE */