nuttx/arch/z80/include/z180/chip.h

466 lines
24 KiB
C
Raw Normal View History

/****************************************************************************
* arch/z80/include/z180/chip.h
*
* Copyright (C) 2012 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
#ifndef __ARCH_Z80_INCLUDE_Z180_CHIP_H
#define __ARCH_Z80_INCLUDE_Z180_CHIP_H
/****************************************************************************
* Included Files
****************************************************************************/
#ifndef __ASSEMBLY__
# include <stdint.h>
#endif
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* Bits in the Z180 FLAGS register ******************************************/
#define Z180_C_FLAG 0x01 /* Bit 0: Carry flag */
#define Z180_N_FLAG 0x02 /* Bit 1: Add/Subtract flag */
#define Z180_PV_FLAG 0x04 /* Bit 2: Parity/Overflow flag */
#define Z180_H_FLAG 0x10 /* Bit 4: Half carry flag */
#define Z180_Z_FLAG 0x40 /* Bit 5: Zero flag */
#define Z180_S_FLAG 0x80 /* Bit 7: Sign flag */
/* Z180 Chip Definitions ****************************************************/
/* Z800180
*
* The 8-bit Z80180 MPU provides the benefits of reduced system costs and
* also provides full backward compatibility with existing ZiLOG Z80 devices.
* Reduced system costs are obtained by incorporating several key system
* functions on-chip with the CPU. These key functions include I/O devices
* such as DMA, UART, and timer channels. Also included on-chip are wait-
* state generators, a clock oscillator, and an interrupt controller. The
* Z80180 MPU is housed in 80-pin QFP, 68-pin PLCC, and 64-pin DIP packages.
*
* Z80180 Features
*
* Enhanced Z80 CPU
* 1 MB MMU
* 2 DMA channels*
* 2 UARTs* (up to 512 Kbps)
* Two 16-Bit Timers
* Clock Serial I/O
* On-Chip Oscillator
* Power-Down Mode*
* Divide-by-One/Divide-by-Two/Multiply-by-Two Clock Options*
* Programmable Driver Strength for EMI Tuning
*
* * Enhanced on the Z8S180 and Z8L180 MPUs
*/
#if defined(CONFIG_ARCH_CHIP_Z8018006VSG) || /* 68-pin PLCC */ \
defined(CONFIG_ARCH_CHIP_Z8018010VSG) || /* 68-pin PLCC */ \
defined(CONFIG_ARCH_CHIP_Z8018008VSG) || /* 68-pin PLCC */ \
defined(CONFIG_ARCH_CHIP_Z8018010FSG) || /* 80-pin QFP (11 pins N/C) */ \
defined(CONFIG_ARCH_CHIP_Z8018008VEG) || /* 68-pin PLCC */ \
defined(CONFIG_ARCH_CHIP_Z8018006VEG) /* 68-pin PLCC */
# undef HAVE_Z8S180 /* Not Z8S180 (5V) or Z8L180 (3.3V) core */
# define HAVE_Z8X180 1 /* Z8x180 registers */
# undef HAVE_Z8X181 /* Z8x181 registers */
# undef HAVE_Z8X182 /* Z8x182 registers */
# define HAVE ROM 0 /* No on-chip ROM */
# define HAVE_SERIALIO 1 /* Have clocked serial I/O */
# undef HAVE_WDT /* No Watchdog timer */
# define HAVE_NTIMERS16 2 /* Two (2) 16-bit timers */
# define HAVE_NCTCS 0 /* No Counter/Timers (CTCs) */
# define HAVE_NDMA 2 /* Two (2) DMA channels */
# define HAVE_NUARTS 2 /* Two (2) UARTs (up to 512 Kbps) */
# define HAVE_NSCC 0 /* No serial communication controller */
# define HAVE_NESCC 0 /* No Enhanced Serial Communication Controllers */
# undef HAVE_16550 /* No 16550 MIMIC */
# define HAVE_NIOLINES 0 /* No I/O lines */
# define HAVE_NPAR8 0 /* No 8-bit parallel ports */
# undef HAVE_IEEE1284 /* No bidirectional centronics interface (IEEE 1284) */
#elif defined(CONFIG_ARCH_CHIP_Z8018006PSG) || /* 64-pin DIP 6 MHz 5V */ \
defined(CONFIG_ARCH_CHIP_Z8018008FSG) || /* 80-pin QFP (11 pins N/C) 8MHz 5V */ \
defined(CONFIG_ARCH_CHIP_Z8018010PSG) || /* 64-pin DIP 10MHz 5V */ \
defined(CONFIG_ARCH_CHIP_Z8018006PEG) || /* 64-pin DIP 6MHz 5V */ \
defined(CONFIG_ARCH_CHIP_Z8018010VEG) || /* 68-pin PLCC 10MHz 5V */ \
defined(CONFIG_ARCH_CHIP_Z8018010PEG) || /* 64-pin DIP 10MHz 5V */ \
defined(CONFIG_ARCH_CHIP_Z8018008PSG) || /* 64-pin DIP 8MHz 5V */ \
defined(CONFIG_ARCH_CHIP_Z8018006FSG) /* 80-pin QFP (11 pins N/C) 6MHz 5V */
# undef HAVE_Z8S180 /* Not Z8S180 (5V) or Z8L180 (3.3V) core */
# define HAVE_Z8X180 1 /* Z8x180 registers */
# undef HAVE_Z8X181 /* Z8x181 registers */
# undef HAVE_Z8X182 /* Z8x182 registers */
# define HAVE ROM 0 /* No on-chip ROM */
# undef HAVE_SERIALIO /* No clocked serial I/O ? */
# undef HAVE_WDT /* No Watchdog timer */
# define HAVE_NTIMERS16 2 /* Two (2) 16-bit timers */
# define HAVE_NCTCS 0 /* No Counter/Timers (CTCs) */
# define HAVE_NDMA 2 /* Two (2) DMA channels */
# define HAVE_NUARTS 2 /* Two (2) UARTs (up to 512 Kbps) */
# define HAVE_NSCC 0 /* No serial communication controller */
# define HAVE_NESCC 0 /* No Enhanced Serial Communication Controllers */
# undef HAVE_16550 /* No 16550 MIMIC */
# define HAVE_NIOLINES 0 /* No I/O lines */
# define HAVE_NPAR8 0 /* No 8-bit parallel ports */
# undef HAVE_IEEE1284 /* No bidirectional centronics interface (IEEE 1284) */
#elif defined(CONFIG_ARCH_CHIP_Z8018000XSO)
defined(CONFIG_ARCH_CHIP_Z8018010FEG)
defined(CONFIG_ARCH_CHIP_Z8018000WSO)
defined(CONFIG_ARCH_CHIP_Z8018008PEG)
# undef HAVE_Z8S180 /* Not Z8S180 (5V) or Z8L180 (3.3V) core */
# define HAVE_Z8X180 1 /* Z8x180 registers */
# undef HAVE_Z8X181 /* Z8x181 registers */
# undef HAVE_Z8X182 /* Z8x182 registers */
# define HAVE ROM 0 /* No on-chip ROM */
# define HAVE_SERIALIO 1 /* Have clocked serial I/O */
# undef HAVE_WDT /* No Watchdog timer */
# define HAVE_NTIMERS16 2 /* Two (2) 16-bit timers */
# define HAVE_NCTCS 0 /* No Counter/Timers (CTCs) */
# define HAVE_NDMA 2 /* Two (2) DMA channels */
# define HAVE_NUARTS 2 /* Two (2) UARTs (up to 512 Kbps) */
# define HAVE_NSCC 0 /* No serial communication controller */
# define HAVE_NESCC 0 /* No Enhanced Serial Communication Controllers */
# undef HAVE_16550 /* No 16550 MIMIC */
# define HAVE_NIOLINES 0 /* No I/O lines */
# define HAVE_NPAR8 0 /* No 8-bit parallel ports */
# undef HAVE_IEEE1284 /* No bidirectional centronics interface (IEEE 1284) */
/* Z80181
*
* The Z80181 SAC Smart Access Controller is an 8-bit CMOS microprocessor that
* combines a Z180-compatible MPU, one channel of the Z85C30 Serial Communications
* Controller, a Z80 CTC, two 8-bit general-purpose parallel ports, and two Chip
* Select signals, into a single 100-pin Quad Flat Pack package.
*
* Z80181 Features
*
* Enhanced Z80 CPU
* 1 MB MMU
* 2 DMAs
* 2 UARTs
* Two 16-Bit Timers
* Clock Serial I/O
* 1 Channel SCC
* 1 8-Bit Counter/Timer
* 16 I/O Lines
* Emulation Mode
*/
#elif defined(CONFIG_ARCH_CHIP_Z8018110FEG) /* 100-pin QFP */
# undef HAVE_Z8S180 /* Not Z8S180 (5V) or Z8L180 (3.3V) core */
# undef HAVE_Z8X180 /* Z8x180 registers */
# define HAVE_Z8X181 1 /* Z8x181 registers */
# undef HAVE_Z8X182 /* Z8x182 registers */
# define HAVE ROM 0 /* No on-chip ROM */
# define HAVE_SERIALIO 1 /* Have clocked serial I/O */
# undef HAVE_WDT /* No Watchdog timer */
# define HAVE_NTIMERS16 2 /* Two (2) 16-bit timers */
# define HAVE_NCTCS 1 /* One (1) 8-bit counter/timer */
# define HAVE_NDMA 2 /* Two (2) DMA channels */
# define HAVE_NUARTS 2 /* Two (2) UARTs (up to 512 Kbps) */
# define HAVE_NSCC 1 /* One (1) Z85C30 serial communication controller */
# define HAVE_NESCC 0 /* No Enhanced Serial Communication Controllers */
# undef HAVE_16550 /* No 16550 MIMIC */
# define HAVE_NIOLINES 16 /* Sixteen (16) I/O lines */
# define HAVE_NPAR8 0 /* No 8-bit parallel ports */
# undef HAVE_IEEE1284 /* No bidirectional centronics interface (IEEE 1284) */
/* Z80182
*
* The Z80182 and Z8L182 MPUs are smart peripheral controller ICs for modems, fax,
* voice messaging, and other communications applications. It uses the Z80180
* microprocessor linked with two channels of the industry-standard Z85230 ESCC,
* 24 bits of parallel I/O, and a 16550 MIMIC for direct connection to the IBM PC,
* XT, or AT bus
*
* Z80182 Features
*
* Enhanced Z80 CPU
* 1 MB MMU
* 2 DMAs
* 2 UARTs (up to 512 Kbps)
* Two 16-Bit Timers
* Clock Serial I/O
* Power-Down Mode
* Divide-by-One/Divide-by-Two/Multiply-by-Two Clock Options
* Enhanced Serial Communication Controller (ESCC) (2 Channels) with 32-Bit CRC
* 16550 MIMIC
* 24 Parallel I/O
* 3.3 V and 5 V Version
*/
#elif defined(CONFIG_ARCH_CHIP_Z8018233FSG) || /* 100-pin QFP */ \
defined(CONFIG_ARCH_CHIP_Z8018220AEG) || /* 100-pin LQFP 20MHz 5V */ \
defined(CONFIG_ARCH_CHIP_Z8018216FSG) || /* 100-pin QFP 16MHz 5V */ \
defined(CONFIG_ARCH_CHIP_Z8018216ASG) || /* 100-pin LQFP */ \
defined(CONFIG_ARCH_CHIP_Z8018233ASG) /* 100-pin LQFP 33MHz 5V */
# undef HAVE_Z8S180 /* Not Z8S180 (5V) or Z8L180 (3.3V) core */
# undef HAVE_Z8X180 /* Z8x180 registers */
# undef HAVE_Z8X181 /* Z8x181 registers */
# define HAVE_Z8X182 1 /* Z8x182 registers */
# define HAVE ROM 0 /* No on-chip ROM */
# define HAVE_SERIALIO 1 /* Have clocked serial I/O */
# undef HAVE_WDT /* No Watchdog timer */
# define HAVE_NTIMERS16 2 /* Two (2) 16-bit timers ? */
# define HAVE_NCTCS 0 /* No Counter/Timers (CTCs) */
# define HAVE_NDMA 2 /* Two (2) DMA channels */
# define HAVE_NUARTS 2 /* Two (2) UARTs (up to 512 Kbps) */
# define HAVE_NSCC 0 /* No Z85C30 serial communication controller */
# define HAVE_NESCC 2 /* Two (2) Z85230 Enhanced Serial Communication Controllers */
# define HAVE_16550 1 /* Have 16550 MIMIC */
# define HAVE_NIOLINES 0 /* No I/O lines */
# define HAVE_NPAR8 3 /* Three (3) 8-bit parallel ports (24-bit) */
# undef HAVE_IEEE1284 /* No bidirectional centronics interface (IEEE 1284) */
/* Z80195
*
* The Z80195 MPU is a smart peripheral controller device designed for general data
* communications applications, and architected specifically to accommodate all
* input and output (I/O) requirements for serial and parallel connectivity.
* Combining a high-performance CPU core with a variety of system and I/O
* resources, the Z80195 is useful in a broad range of applications.
*
* Z80195 Features
*
* Enhanced Z80 CPU
* 1 MB MMU
* 2 DMAs
* 2 UARTs (up to 512 Kbps)
* Two 16-Bit Timers
* 4 Counter/Timers
* Clock Serial I/O
* Power-Down Mode
* 32 K ROM (185)
* 1 Ch ESCC
* IEEE 1284 Bi-Directional Centronics Parallel Port
2014-04-14 00:22:22 +02:00
* 7 or 24 Bits of I/O
*/
#elif defined(CONFIG_ARCH_CHIP_Z8019520FSG) || /* 100-pin QFP 20MHz 5V */ \
defined(CONFIG_ARCH_CHIP_Z8019533FSG) /* 100-pin QFP 33MHz 5V */
# undef HAVE_Z8S180 /* No Z8S180 (5V) or Z8L180 (3.3V) core */
# undef HAVE ROM 0 /* No 32KB on-chip ROM (z80185 only) */
# define HAVE_SERIALIO 1 /* Have clocked serial I/O */
# defube HAVE_WDT 1 /* Have Watchdog timer */
# define HAVE_NTIMERS16 2 /* Two (2) 16-bit counter/timers */
# define HAVE_NCTCS 4 /* Four (4) Counter/Timers (CTCs) */
# define HAVE_NDMA 2 /* Two (2) DMA channels */
# define HAVE_NUARTS 2 /* Two (2) UARTs (up to 512 Kbps) */
# define HAVE_NSCC 0 /* No Z85C30 serial communication controller */
# define HAVE_NESCC 1 /* One (1) Enhanced Serial Communication Controllers (EMSCC) */
# undef HAVE_16550 /* No 16550 MIMIC */
# define HAVE_NIOLINES 0 /* No I/O lines */
# define HAVE_NPAR8 2 /* Two (s) 8-bit parallel ports (or 17-bit IEEE 1284) */
# define HAVE_IEEE1284 1 /* Have bidirectional centronics interface (IEEE 1284) */
/* Z8L180
*
* The enhanced Z8S180/Z8L180 significantly improves on previous Z80180 models,
* while still providing full backward compatibility with existing ZiLOG Z80
* devices. The Z8S180/Z8L180 now offers faster execution speeds, power-saving
* modes, and EMI noise reduction.
*
* Z8L180 Features
*
* Enhanced Z80 CPU
* 1 MB MMU
* 2 DMAs*
* 2 UARTs* (up to 512 Kbps)
* Two 16-Bit Timers
* Clock Serial I/O
* On-Chip Oscillator
* Power-Down Mode*
* Divide-by-One/Divide-by-Two/Multiply-by-Two Clock Options*
* Programmable Driver Strength for EMI Tuning
*
* * Enhanced on the Z8S180 and Z8L180 MPUs.
*/
#elif defined(CONFIG_ARCH_CHIP_Z8L18020VSG) || /* 68-pinn PLCC */ \
defined(CONFIG_ARCH_CHIP_Z8L18020FSG) || /* 80-pin GFP 20MHz 3.3V */ \
defined(CONFIG_ARCH_CHIP_Z8L18020PSG)
# define HAVE_Z8S180 1 /* Uses Z8S180 (5V) or Z8L180 (3.3V) core */
# define HAVE_Z8X180 1 /* Z8x180 registers */
# undef HAVE_Z8X181 /* Z8x181 registers */
# undef HAVE_Z8X182 /* Z8x182 registers */
# define HAVE ROM 0 /* No on-chip ROM */
# define HAVE_SERIALIO 1 /* Have clocked serial I/O */
# undef HAVE_WDT /* No Watchdog timer */
# define HAVE_NTIMERS16 2 /* Two (2) 16-bit timers */
# define HAVE_NCTCS 0 /* No Counter/Timers (CTCs) */
# define HAVE_NDMA 2 /* Two (2) DMA channels */
# define HAVE_NUARTS 2 /* Two (2) UARTs (up to 512 Kbps) */
# define HAVE_NSCC 0 /* No serial communication controller */
# define HAVE_NESCC 0 /* No Enhanced Serial Communication Controllers */
# undef HAVE_16550 /* No 16550 MIMIC */
# define HAVE_NIOLINES 0 /* No I/O lines */
# define HAVE_NPAR8 0 /* No 8-bit parallel ports */
# undef HAVE_IEEE1284 /* No bidirectional centronics interface (IEEE 1284) */
/* Z8L182
*
* The Z80182/Z8L182 is a smart peripheral controller IC for modem (in particular
* V. Fast applications), fax, voice messaging and other communications
* applications. It uses the Z80180 microprocessor (Z8S180 MPU core) linked with
* two channels of the industry standard Z85230 ESCC (Enhanced Serial
* Communications Controller), 24 bits of parallel I/O, and a 16550 MIMIC for
* direct connection to the IBM PC, XT, AT bus.
*
* Z8L182 Features
*
* Enhanced Z80 CPU
* 1 MB MMU
* 2 DMAs
* 2 UARTs (up to 512 Kbps)
* Two 16-Bit Timers
* Clock Serial I/O
* Power-Down Mode
* Divide-by-One/Divide-by-Two/Multiply-by-Two Clock Options
* ESCC (2 Channels) with 32-Bit CRC
* 16550 MIMIC
* 24 Parallel I/O
* 3.3 V and 5 V Version
*/
#elif defined(CONFIG_ARCH_CHIP_Z8L18220ASG) || /* 100-pin LQFP */ \
defined(CONFIG_ARCH_CHIP_Z8L18220FSG) || /* 100-pin QFP 20MHz 3.3V */ \
defined(CONFIG_ARCH_CHIP_Z8L18220AEG)
# define HAVE_Z8S180 1 /* Uses Z8S180 (5V) or Z8L180 (3.3V) core */
# undef HAVE_Z8X180 /* Z8x180 registers */
# undef HAVE_Z8X181 /* Z8x181 registers */
# define HAVE_Z8X182 1 /* Z8x182 registers */
# define HAVE ROM 0 /* No on-chip ROM */
# define HAVE_SERIALIO 1 /* Have clocked serial I/O */
# undef HAVE_WDT /* No Watchdog timer */
# define HAVE_NTIMERS16 2 /* Two (2) 16-bit timers ? */
# define HAVE_NCTCS 0 /* No Counter/Timers (CTCs) */
# define HAVE_NDMA 2 /* Two (2) DMA channels */
# define HAVE_NUARTS 2 /* Two (2) UARTs (up to 512 Kbps) */
# define HAVE_NSCC 0 /* No Z85C30 serial communication controller */
# define HAVE_NESCC 2 /* Two (2) Z85230 Enhanced Serial Communication Controllers */
# define HAVE_16550 1 /* Have 16550 MIMIC */
# define HAVE_NIOLINES 0 /* No I/O lines */
# define HAVE_NPAR8 3 /* Three (3) 8-bit parallel ports (24-bit) */
# undef HAVE_IEEE1284 /* No bidirectional centronics interface (IEEE 1284) */
/* Z8SL180
*
* The enhanced Z8S180/Z8L180 significantly improves on previous Z80180 models,
* while still providing full backward compatibility with existing ZiLOG Z80
* devices. The Z8S180/Z8L180 now offers faster execution speeds, power-saving
* modes, and EMI noise reduction.This enhanced Z180 design also incorporates
* additional feature enhancements to the ASCIs, DMAs, and STANDBY mode power
* consumption. With the addition of ESCC-like Baud Rate Generators (BRGs), the
* two ASCIs offer the flexibility and capability to transfer data
* asynchronously at rates of up to 512 Kbps.
*
* Z8S180 Features
*
* External Memory - 1
* Voltage Range - 5.0V
* Communications Controller - CSIO, UART
* Other Features - 1MB MMU, 2xDMA<EFBFBD>s, 2xUARTs
* Speed (MHz) - 20, 10, 33
* Core / CPU Used - Z180
* Pin Count - 64, 68, 80
* Timers - 2
* I/O - Clock Serial
* Package - DIP, PLCC, QFP
*/
#elif defined(CONFIG_ARCH_CHIP_Z8S18020VSG) || /* 68-pin PLCC */ \
defined(CONFIG_ARCH_CHIP_Z8S18020VSG1960) || /* 68-pin PLCC */ \
defined(CONFIG_ARCH_CHIP_Z8S18033VSG) || /* 68-pin PLCC */ \
defined(CONFIG_ARCH_CHIP_Z8S18010FSG) || /* 80-pin QFP */ \
defined(CONFIG_ARCH_CHIP_Z8S18010VEG) || /* 68-pin PLCC */ \
defined(CONFIG_ARCH_CHIP_Z8S18020VEG) || /* 68-pin PLCC */ \
defined(CONFIG_ARCH_CHIP_Z8S18010VSG) || /* 68-pin PLCC */ \
defined(CONFIG_ARCH_CHIP_Z8S18020PSG) || /* 64-pin DIP 10Mhz 5V */ \
defined(CONFIG_ARCH_CHIP_Z8S18033FSG) || /* 80-pin QFP 33MHz 5V */ \
defined(CONFIG_ARCH_CHIP_Z8S18033FEG) || /* 80-pin QFP 33MHz 5V */ \
defined(CONFIG_ARCH_CHIP_Z8S18020FSG) || /* 80-pin QFP 20MHz 5V */ \
defined(CONFIG_ARCH_CHIP_Z8S18033VEG) || /* 68-pin PLCC 33MHz 5V */ \
defined(CONFIG_ARCH_CHIP_Z8S18010PSG) || /* 64-pin DIP 10MHz 5V */ \
defined(CONFIG_ARCH_CHIP_Z8S18020FEG) || \
defined(CONFIG_ARCH_CHIP_Z8S18010PEG) || \
defined(CONFIG_ARCH_CHIP_Z8S18010FEG)
# define HAVE_Z8S180 1 /* Uses Z8S180 (5V) or Z8L180 (3.3V) core */
# define HAVE_Z8X180 1 /* Z8x180 registers */
# undef HAVE_Z8X181 /* Z8x181 registers */
# undef HAVE_Z8X182 /* Z8x182 registers */
# define HAVE ROM 0 /* No on-chip ROM */
# define HAVE_SERIALIO 1 /* Have clocked serial I/O */
# undef HAVE_WDT /* No Watchdog timer */
# define HAVE_NTIMERS16 2 /* Two (2) 16-bit timers */
# define HAVE_NCTCS 0 /* No Counter/Timers (CTCs) */
# define HAVE_NDMA 2 /* Two (2) DMA channels */
# define HAVE_NUARTS 2 /* Two (2) UARTs (up to 512 Kbps) */
# define HAVE_NSCC 0 /* No serial communication controller */
# define HAVE_NESCC 0 /* No Enhanced Serial Communication Controllers */
# undef HAVE_16550 /* No 16550 MIMIC */
# define HAVE_NIOLINES 0 /* No I/O lines */
# define HAVE_NPAR8 0 /* No 8-bit parallel ports */
# undef HAVE_IEEE1284 /* No bidirectional centronics interface (IEEE 1284) */
#else
# error "Unrecognized/undefined Z180 chip"
#endif
/****************************************************************************
* Public Types
****************************************************************************/
/****************************************************************************
* Inline functions
****************************************************************************/
/****************************************************************************
* Public Data
****************************************************************************/
/****************************************************************************
* Public Function Prototypes
****************************************************************************/
#endif /* __ARCH_Z80_INCLUDE_Z180_CHIP_H */