nuttx/boards/arm/stm32wl5/nucleo-wl55jc/Kconfig

#
# For a description of the syntax of this configuration file,
# see the file kconfig-language.txt in the NuttX tools repository.
#

if ARCH_BOARD_NUCLEO_WL55JC

config ARCH_BOARD_NUCLEO_WL55JC_DEMO_LED_IRQ
	bool "[demo] LED on button interrupt"
	depends on ARCH_BUTTONS
	depends on NSH_ARCHINIT
	---help---
		When enabled, pressing B3 button will toggle red LED.
		This options is mostly for demo purposes of how one
		can install GPIO interrupt.

comment "[demo] LED on button interrupt requires NSH_ARCHINIT"
	depends on !NSH_ARCHINIT || !ARCH_BUTTONS

menuconfig ARCH_BOARD_FLASH_MOUNT
	bool "Enable FLASH partitioning and mounting"
	depends on !DISABLE_MOUNTPOINT
	select MTD
	select MTD_PROGMEM
	select MTD_PARTITION
	select MTD_PARTITION_NAMES
	select FS_PROCFS
	default n
	---help---
		When enabled, you will be able to configure partition table
		for onboard FLASH memory to create and mount flash filesystems.
		All partition sizes are specified in PAGE_SIZE size. On
		STM32WL5 page size is always 2048.

		On STM32WL55JC there are 128 pages of flash memory. Size of
		all configured partitions shall not exceed 128. In fact, it
		should be equal to 128 or else you will simply have unused
		space on flash. Even if you want some raw flash access you
		should specify this partition in table and select fs_raw.

		By default there are only 4 partitions defined, if you need
		more, you can define more in Kconfig and stm32_flash.c files.

comment "FLASH partitioning and mounting requires !DISABLE_MOUNTPOINT"
	depends on DISABLE_MOUNTPOINT

if ARCH_BOARD_FLASH_MOUNT

config ARCH_BOARD_FLASH_BL_PROG_SIZE
	int "Size reserved for bootloader program code"
	default 0
	---help---
		How much memory to reserve for bootloader program code.
		If you are using bootloader in your application, specify
		max size of bootloader partition. This memory will be
		reserved at the beginning of flash, and CPU1 progmem will
		be right after bootloader.

		If you don't use bootloader and just want to run program
		directly after reset, set this to 0.

config ARCH_BOARD_FLASH_CPU1_PROG_SIZE
	int "Size reserved for CPU1 program code"
	default 127
	---help---
		How much memory to reserve for CPU1 program code. This should
		specified as other partitions will be created at offset to
		this partition.

config ARCH_BOARD_FLASH_CPU2_PROG_SIZE
	int "Size reserved for CPU2 program code"
	default 0
	---help---
		How much memory to reserve for CPU2 program code. If you use
		dual CPU you should specify how much memory you want to
		reserve for code for second CPU. User partition will be
		created at this offset. If you don't use CPU2, set this to 0.

config ARCH_BOARD_FLASH_PART1_SIZE
	int "Size of user partition 1"
	default 1
	---help---
		Size of partition specified in PAGE_SIZE. Page size on
		stm32wl5xxx is always 2048.

config ARCH_BOARD_FLASH_PART1_NAME
	string "Name of user partition 1"
	default "part1"
	---help---
		MTD partition name, this can be later read by MTD API,
		or it can also be read from /proc/partitions to easily
		identify partitions.

config ARCH_BOARD_FLASH_PART1_MNT
	string "Mount point for user partition 1"
	default "/mnt/part1"
	---help---
		Directory where filesystem should be mounted.

		Note: not all filesystems can be mounted. rawfs and
		mtdconfig for example cannot be mounted. In that case
		this config will be ignored.

config ARCH_BOARD_FLASH_PART1_FS
	string
	default "rawfs" if ARCH_BOARD_FLASH_PART1_FS_RAWFS
	default "nxffs" if ARCH_BOARD_FLASH_PART1_FS_NXFFS
	default "smartfs" if ARCH_BOARD_FLASH_PART1_FS_SMARTFS
	default "mtdconfig" if ARCH_BOARD_FLASH_PART1_FS_MTDCONFIG

choice
	prompt "Filesystem of user partition 1"
	default ARCH_BOARD_FLASH_PART1_FS_RAW

config ARCH_BOARD_FLASH_PART1_FS_RAWFS
	bool "rawfs"
	---help---
		Raw block device /dev/mtdblockN will be available to use
		with standard open(2)/fopen(3) functions.

config ARCH_BOARD_FLASH_PART1_FS_NXFFS
	select FS_NXFFS
	bool "nxffs"
	---help---
		Partition will be used as nxffs. Only one nxffs partition
		can be enabled at one given time!

config ARCH_BOARD_FLASH_PART1_FS_SMARTFS
	select FS_SMARTFS
	select MTD_SMART
	bool "smartfs"
	---help---
		Partition will be used as smartfs. After first flash, you
		will have to format partition with "mksmartfs /dev/smartN"
		command. This has to be done only once unless you change
		partition table that would affect offsets and/or sizes.
		Programmers (like openocd) should not touch this memory
		when flashing new software, unless you exceeded reserved
		memory for program code.

		Smartfs uses quite substential ammount of FLASH data to
		get to workable state and mount. Looks like 8 page sizes
		is absolute minimum (so a 16KiB!).

config ARCH_BOARD_FLASH_PART1_FS_MTDCONFIG
	select MTD_CONFIG
	bool "mtdconfig"
	---help---
		Purpose build filesystem to hold application's configuration.
		It's not a filesystem per se, as it cannot be mounted and
		setting and retrieving configuration is done via ioctl(2)
		calls.

endchoice # Filesystem of user partition 1

config ARCH_BOARD_FLASH_PART2_SIZE
	int "Size of user partition 2"
	default 0

if ARCH_BOARD_FLASH_PART2_SIZE > 0

config ARCH_BOARD_FLASH_PART2_NAME
	string "Name of user partition 2"
	default "part2"

config ARCH_BOARD_FLASH_PART2_MNT
	string "Mount point for user partition 2"
	default "/mnt/part2"

config ARCH_BOARD_FLASH_PART2_FS
	string
	default "rawfs" if ARCH_BOARD_FLASH_PART2_FS_RAWFS
	default "nxffs" if ARCH_BOARD_FLASH_PART2_FS_NXFFS
	default "smartfs" if ARCH_BOARD_FLASH_PART2_FS_SMARTFS
	default "mtdconfig" if ARCH_BOARD_FLASH_PART2_FS_MTDCONFIG

choice
	prompt "Filesystem of user partition 2"
	default ARCH_BOARD_FLASH_PART2_FS_RAW

config ARCH_BOARD_FLASH_PART2_FS_RAWFS
	bool "rawfs"

config ARCH_BOARD_FLASH_PART2_FS_NXFFS
	select FS_NXFFS
	bool "nxffs"

config ARCH_BOARD_FLASH_PART2_FS_SMARTFS
	select FS_SMARTFS
	select MTD_SMART
	bool "smartfs"

config ARCH_BOARD_FLASH_PART2_FS_MTDCONFIG
	select MTD_CONFIG
	bool "mtdconfig"

endchoice # Filesystem of user partition 2

config ARCH_BOARD_FLASH_PART3_SIZE
	int "Size of user partition 3"
	default 0

if ARCH_BOARD_FLASH_PART3_SIZE > 0

config ARCH_BOARD_FLASH_PART3_NAME
	string "Name of user partition 3"
	default "part3"

config ARCH_BOARD_FLASH_PART3_MNT
	string "Mount point for user partition 3"
	default "/mnt/part3"

config ARCH_BOARD_FLASH_PART3_FS
	string
	default "rawfs" if ARCH_BOARD_FLASH_PART3_FS_RAWFS
	default "nxffs" if ARCH_BOARD_FLASH_PART3_FS_NXFFS
	default "smartfs" if ARCH_BOARD_FLASH_PART3_FS_SMARTFS
	default "mtdconfig" if ARCH_BOARD_FLASH_PART3_FS_MTDCONFIG

choice
	prompt "Filesystem of user partition 3"
	default ARCH_BOARD_FLASH_PART3_FS_RAW

config ARCH_BOARD_FLASH_PART3_FS_RAWFS
	bool "rawfs"

config ARCH_BOARD_FLASH_PART3_FS_NXFFS
	select FS_NXFFS
	bool "nxffs"

config ARCH_BOARD_FLASH_PART3_FS_SMARTFS
	select FS_SMARTFS
	select MTD_SMART
	bool "smartfs"

config ARCH_BOARD_FLASH_PART3_FS_MTDCONFIG
	select MTD_CONFIG
	bool "mtdconfig"

endchoice # Filesystem of user partition 3

config ARCH_BOARD_FLASH_PART4_SIZE
	int "Size of user partition 4"
	default 0

if ARCH_BOARD_FLASH_PART4_SIZE > 0

config ARCH_BOARD_FLASH_PART4_NAME
	string "Name of user partition 4"
	default "part4"

config ARCH_BOARD_FLASH_PART4_MNT
	string "Mount point for user partition 4"
	default "/mnt/part4"

config ARCH_BOARD_FLASH_PART4_FS
	string
	default "rawfs" if ARCH_BOARD_FLASH_PART4_FS_RAWFS
	default "nxffs" if ARCH_BOARD_FLASH_PART4_FS_NXFFS
	default "smartfs" if ARCH_BOARD_FLASH_PART4_FS_SMARTFS
	default "mtdconfig" if ARCH_BOARD_FLASH_PART4_FS_MTDCONFIG

choice
	prompt "Filesystem of user partition 4"
	default ARCH_BOARD_FLASH_PART4_FS_RAW

config ARCH_BOARD_FLASH_PART4_FS_RAWFS
	bool "rawfs"

config ARCH_BOARD_FLASH_PART4_FS_NXFFS
	select FS_NXFFS
	bool "nxffs"

config ARCH_BOARD_FLASH_PART4_FS_SMARTFS
	select FS_SMARTFS
	select MTD_SMART
	bool "smartfs"

config ARCH_BOARD_FLASH_PART4_FS_MTDCONFIG
	select MTD_CONFIG
	bool "mtdconfig"

endchoice # Filesystem of user partition 4

endif # ARCH_BOARD_FLASH_PART2_SIZE > 0
endif # ARCH_BOARD_FLASH_PART3_SIZE > 0
endif # ARCH_BOARD_FLASH_PART4_SIZE > 0

endif # ARCH_BOARD_FLASH_MOUNT

if LCD_SSD1680 && ARCH_BOARD_NUCLEO_WL55JC

menu "E-ink SSD1680 pins config"

choice
	prompt "Port that handles Chip Select line (output)"
	default SSD1680_GPIO_CS_PORTA if ARCH_BOARD_NUCLEO_WL55JC

config SSD1680_GPIO_CS_DISABLED
	bool "Not available"

config SSD1680_GPIO_CS_PORTA
	bool "Port A"

config SSD1680_GPIO_CS_PORTB
	bool "Port B"

config SSD1680_GPIO_CS_PORTC
	bool "Port C"

config SSD1680_GPIO_CS_PORTD
	bool "Port D"

endchoice

if SSD1680_GPIO_CS_PORTA || SSD1680_GPIO_CS_PORTB || SSD1680_GPIO_CS_PORTC || SSD1680_GPIO_CS_PORTD
config SSD1680_GPIO_PIN_CS
	int "Pin that select the chip on SPI bus (output)"
	default "4" if ARCH_BOARD_NUCLEO_WL55JC
	range 0 15
endif #SSD1680_GPIO_CS_PORTA || SSD1680_GPIO_CS_PORTB || SSD1680_GPIO_CS_PORTC || SSD1680_GPIO_CS_PORTD

choice
	prompt "Port that handles Data/!Command line"
	default SSD1680_GPIO_DTA_CMD_PORTA if ARCH_BOARD_NUCLEO_WL55JC

config SSD1680_GPIO_DTA_CMD_DISABLED
	bool "Not available"

config SSD1680_GPIO_DTA_CMD_PORTA
	bool "Port A"

config SSD1680_GPIO_DTA_CMD_PORTB
	bool "Port B"

config SSD1680_GPIO_DTA_CMD_PORTC
	bool "Port C"

config SSD1680_GPIO_DTA_CMD_PORTD
	bool "Port D"

endchoice

if SSD1680_GPIO_DTA_CMD_PORTA || SSD1680_GPIO_DTA_CMD_PORTB || SSD1680_GPIO_DTA_CMD_PORTC || SSD1680_GPIO_DTA_CMD_PORTD
config SSD1680_GPIO_PIN_DTA_CMD
	int "Pin that switch between command and data on 4-wire SPI bus"
	default "9" if ARCH_BOARD_NUCLEO_WL55JC
	range 0 15
endif #SSD1680_GPIO_DTA_CMD_PORTA || SSD1680_GPIO_DTA_CMD_PORTB || SSD1680_GPIO_DTA_CMD_PORTC || SSD1680_GPIO_DTA_CMD_PORTD

choice
	prompt "Port that handles reset line (output)"
	default SSD1680_GPIO_RST_PORTC if ARCH_BOARD_NUCLEO_WL55JC

config SSD1680_GPIO_RST_DISABLED
	bool "Not available"

config SSD1680_GPIO_RST_PORTA
	bool "Port A"

config SSD1680_GPIO_RST_PORTB
	bool "Port B"

config SSD1680_GPIO_RST_PORTC
	bool "Port C"

config SSD1680_GPIO_RST_PORTD
	bool "Port D"
endchoice

if SSD1680_GPIO_RST_PORTA || SSD1680_GPIO_RST_PORTB || SSD1680_GPIO_RST_PORTC || SSD1680_GPIO_RST_PORTD
config SSD1680_GPIO_PIN_RST
	int "Pin that handles the reset line (output)"
	default "2" if ARCH_BOARD_NUCLEO_WL55JC
	range 0 15
endif #SSD1680_GPIO_RST_PORTA || SSD1680_GPIO_RST_PORTB || SSD1680_GPIO_RST_PORTC || SSD1680_GPIO_RST_PORTD

choice
	prompt "Port that handles busy line (input)"
	default SSD1680_GPIO_BUSY_PORTC if ARCH_BOARD_NUCLEO_WL55JC

config SSD1680_GPIO_BUSY_DISABLED
	bool "Not available"

config SSD1680_GPIO_BUSY_PORTA
	bool "Port A"

config SSD1680_GPIO_BUSY_PORTB
	bool "Port B"

config SSD1680_GPIO_BUSY_PORTC
	bool "Port C"

config SSD1680_GPIO_BUSY_PORTD
	bool "Port D"

endchoice

if SSD1680_GPIO_BUSY_PORTA || SSD1680_GPIO_BUSY_PORTB || SSD1680_GPIO_BUSY_PORTC || SSD1680_GPIO_BUSY_PORTD
config SSD1680_GPIO_PIN_BUSY
	int "Pin that handles the busy line (input)"
	default "1" if ARCH_BOARD_NUCLEO_WL55JC
	range 0 15
endif #SSD1680_GPIO_BUSY_PORTA || SSD1680_GPIO_BUSY_PORTB || SSD1680_GPIO_BUSY_PORTC || SSD1680_GPIO_BUSY_PORTD

choice
	prompt "Port that handles power line"
	default SSD1680_GPIO_PWR_DISABLED if ARCH_BOARD_NUCLEO_WL55JC

config SSD1680_GPIO_PWR_DISABLED
	bool "Not available"

config SSD1680_GPIO_PWR_PORTA
	bool "Port A"

config SSD1680_GPIO_PWR_PORTB
	bool "Port B"

config SSD1680_GPIO_PWR_PORTC
	bool "Port C"

config SSD1680_GPIO_PWR_PORTD
	bool "Port D"

endchoice

if SSD1680_GPIO_PWR_PORTA || SSD1680_GPIO_PWR_PORTB || SSD1680_GPIO_PWR_PORTC || SSD1680_GPIO_PWR_PORTD
config SSD1680_GPIO_PIN_PWR
	int "Pin that handles the pwr on/off line (output)"
	range 0 31
endif #SSD1680_GPIO_PWR_PORTA || SSD1680_GPIO_PWR_PORTB || SSD1680_GPIO_PWR_PORTC || SSD1680_GPIO_PWR_PORTD


config SSD1680_SPI_BUS
	int "Spi bus no"
	range 1 2
	default "1"
endmenu

endif #LCD_SSD1680

endif # ARCH_BOARD_NUCLEO_WL55JC