nuttx/arch/avr/src/common/up_initialize.c

/****************************************************************************
 * arch/avr/src/common/up_initialize.c
 *
 *   Copyright (C) 2010, 2012-2013, 2015-2017 Gregory Nutt. All rights reserved.
 *   Author: Gregory Nutt <gnutt@nuttx.org>
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 * 3. Neither the name NuttX nor the names of its contributors may be
 *    used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
 * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
 * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 *
 ****************************************************************************/

/****************************************************************************
 * Included Files
 ****************************************************************************/

#include <nuttx/config.h>

#include <debug.h>

#include <nuttx/arch.h>
#include <nuttx/sched_note.h>
#include <nuttx/drivers/drivers.h>
#include <nuttx/fs/loop.h>
#include <nuttx/net/loopback.h>
#include <nuttx/net/tun.h>
#include <nuttx/net/telnet.h>
#include <nuttx/syslog/syslog.h>
#include <nuttx/syslog/syslog_console.h>
#include <nuttx/serial/pty.h>
#include <nuttx/crypto/crypto.h>
#include <nuttx/power/pm.h>

#include <arch/board/board.h>

#include "up_arch.h"
#include "up_internal.h"

/****************************************************************************
 * Pre-processor Definitions
 ****************************************************************************/

/* Determine which (if any) console driver to use.  This will probably cause
 * up_serialinit to be incorrectly called if there is no USART configured to
 * be an RS-232 device (see as an example arch/avr/src/at32uc23/at32uc3_config.h)
 * This will probably have to be revisited someday.
 *
 * If a console is enabled and no other console device is specified, then a
 * serial console is
 * assumed.
 */

#ifndef CONFIG_DEV_CONSOLE
#  undef  USE_SERIALDRIVER
#  undef  USE_EARLYSERIALINIT
#  undef  CONFIG_DEV_LOWCONSOLE
#  undef  CONFIG_RAMLOG_CONSOLE
#else
#  if defined(CONFIG_RAMLOG_CONSOLE)
#    undef  USE_SERIALDRIVER
#    undef  USE_EARLYSERIALINIT
#    undef  CONFIG_DEV_LOWCONSOLE
#  elif defined(CONFIG_DEV_LOWCONSOLE)
#    undef  USE_SERIALDRIVER
#    undef  USE_EARLYSERIALINIT
#  else
#    define USE_SERIALDRIVER 1
#    define USE_EARLYSERIALINIT 1
#  endif
#endif

/* If some other device is used as the console, then the serial driver may
 * still be needed.  Let's assume that if the upper half serial driver is
 * built, then the lower half will also be needed.  There is no need for
 * the early serial initialization in this case.
 */

#if !defined(USE_SERIALDRIVER) && defined(CONFIG_STANDARD_SERIAL)
#  define USE_SERIALDRIVER 1
#endif

/****************************************************************************
 * Private Functions
 ****************************************************************************/

/****************************************************************************
 * Name: up_color_intstack
 *
 * Description:
 *   Set the interrupt stack to a value so that later we can determine how
 *   much stack space was used by interrupt handling logic
 *
 ****************************************************************************/

#if defined(CONFIG_STACK_COLORATION) && CONFIG_ARCH_INTERRUPTSTACK > 3
static inline void up_color_intstack(void)
{
  uint8_t *ptr = (uint8_t *)&g_intstackalloc;
  ssize_t size;

  for (size = (CONFIG_ARCH_INTERRUPTSTACK & ~3);
       size > 0;
       size -= sizeof(uint8_t))
    {
      *ptr++ = INTSTACK_COLOR;
    }
}
#else
#  define up_color_intstack()
#endif

/****************************************************************************
 * Public Functions
 ****************************************************************************/

/****************************************************************************
 * Name: up_initialize
 *
 * Description:
 *   up_initialize will be called once during OS initialization after the
 *   basic OS services have been initialized.  The architecture specific
 *   details of initializing the OS will be handled here.  Such things as
 *   setting up interrupt service routines, starting the clock, and
 *   registering device drivers are some of the things that are different
 *   for each processor and hardware platform.
 *
 *   up_initialize is called after the OS initialized but before the user
 *   initialization logic has been started and before the libraries have
 *   been initialized.  OS services and driver services are available.
 *
 ****************************************************************************/

void up_initialize(void)
{
  /* Initialize global variables */

  g_current_regs = NULL;

  /* Colorize the interrupt stack */

  up_color_intstack();

  /* Add any extra memory fragments to the memory manager */

  up_addregion();

#ifdef CONFIG_PM
  /* Initialize the power management subsystem.  This MCU-specific function
   * must be called *very* early in the initialization sequence *before* any
   * other device drivers are initialized (since they may attempt to register
   * with the power management subsystem).
   */

  up_pminitialize();
#endif

#ifdef CONFIG_ARCH_DMA
  /* Initialize the DMA subsystem if the weak function up_dma_initialize has been
   * brought into the build
   */

#ifdef CONFIG_HAVE_WEAKFUNCTIONS
  if (up_dma_initialize)
#endif
    {
      up_dma_initialize();
    }
#endif

  /* Register devices */

#if defined(CONFIG_DEV_NULL)
  devnull_register();   /* Standard /dev/null */
#endif

#if defined(CONFIG_DEV_RANDOM)
  devrandom_register(); /* Standard /dev/random */
#endif

#if defined(CONFIG_DEV_URANDOM)
  devurandom_register();   /* Standard /dev/urandom */
#endif

#if defined(CONFIG_DEV_ZERO)
  devzero_register();   /* Standard /dev/zero */
#endif

#if defined(CONFIG_DEV_LOOP)
  loop_register();      /* Standard /dev/loop */
#endif

#if defined(CONFIG_SCHED_INSTRUMENTATION_BUFFER) && \
    defined(CONFIG_DRIVER_NOTE)
  note_register();      /* Non-standard /dev/note */
#endif

  /* Initialize the serial device driver */

#ifdef USE_SERIALDRIVER
  up_serialinit();
#endif

#ifdef CONFIG_RPMSG_UART
  rpmsg_serialinit();
#endif

  /* Initialize the console device driver (if it is other than the standard
   * serial driver).
   */

#if defined(CONFIG_DEV_LOWCONSOLE)
  lowconsole_init();
#elif defined(CONFIG_CONSOLE_SYSLOG)
  syslog_console_init();
#elif defined(CONFIG_RAMLOG_CONSOLE)
  ramlog_consoleinit();
#endif

#ifdef CONFIG_PSEUDOTERM_SUSV1
  /* Register the master pseudo-terminal multiplexor device */

  ptmx_register();
#endif

  /* Early initialization of the system logging device.  Some SYSLOG channel
   * can be initialized early in the initialization sequence because they
   * depend on only minimal OS initialization.
   */

  syslog_initialize(SYSLOG_INIT_EARLY);

#if defined(CONFIG_CRYPTO)
  /* Initialize the HW crypto and /dev/crypto */

  up_cryptoinitialize();
#endif

#ifdef CONFIG_CRYPTO_CRYPTODEV
  devcrypto_register();
#endif

#ifndef CONFIG_NETDEV_LATEINIT
  /* Initialize the network */

  up_netinitialize();
#endif

#ifdef CONFIG_NET_LOOPBACK
  /* Initialize the local loopback device */

  localhost_initialize();
#endif

#ifdef CONFIG_NET_TUN
  /* Initialize the TUN device */

  tun_initialize();
#endif

#ifdef CONFIG_NETDEV_TELNET
  /* Initialize the Telnet session factory */

  telnet_initialize();
#endif

  /* Initialize USB */

  up_usbinitialize();

#if defined(ARCH_HAVE_LEDS)
  board_autoled_on(LED_IRQSENABLED);
#endif
}