nuttx/drivers/timers/rpmsg_rtc.c

405 lines
12 KiB
C
Raw Normal View History

This commit brings in the drivers needed to support OpenAMP. These changes were ported from https://github.com/FishsemiCode/nuttx. The current state: Most drivers do now compile but are not yet verfied. This port was effort of a number of people, I rather arbitrarily gave authorship to Guiding Li because he has the largest number of fundamental quashed commits from the Xiamoi repository. Squashed commit of the following: Author: Xiang Xiao <xiaoxiang@pinecone.net> include/nuttx/b2c.h and libx/libc/string: Add non-standard string functions to deal with cases where there are more than 8-bits in a type char. Author: Gregory Nutt <gnutt@nuttx.org> Fix several build issues/missing definitiona needed for OpenAMP build in drivers/. Add OpenAMP code has been reviewed and ran through tools/nxstyle (with all reports accounted for). Author: Xiang Xiao <xiaoxiang@xiaomi.com> tools/: Fix the minor issue in Makefile Author: Gregory Nutt <gnutt@nuttx.org> drivers/rptun/rptun.c: Review for coding standard. Run against tools/nxstyle. tools/LibTargets.mk: Fix some TABs that were turned into spaces by a copy-paste. fs/hostfs: Add configure and build support for hostfs RPC. drivers/timer: Add configure and build support for syslog RTC. drivers/syslog: Add configure and build support for syslog RPC. drivers/serial: Add configure and build support for serial RPC. Kconfig, tools/*.mk. openamp/: Add basic OpenAMP build support. drivers/rptun: Add configure and build support for OpenAMP tunnel drivers. drivers/net: Update Make.defs and Kconfig for OpenSDA support. Remove drivers/clk/clk-rpmsg.c drivers/power/rpmsg_regulator.c. These depend on upstreaming support for a new subsystem based on the clk/regulator is model from Linux. Removed because we want to separate the activities. We will just try to get the basic OpenAMP support in place for now. Remove drivers/misc/misc_rpmsg.c and include/nuttx/misc/misc_rpmsg.h. These are specific to the Xiaomi application. Author: zhuyanlin <zhuyanlin@pinecone.net> This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed. Author: Jianli Dong <dongjianli@pinecone.net> This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed. Author: Guiding Li <liguiding@pinecone.net> This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed.
2019-11-02 18:30:33 +01:00
/****************************************************************************
* drivers/timers/rpmsg_rtc.c
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
This commit brings in the drivers needed to support OpenAMP. These changes were ported from https://github.com/FishsemiCode/nuttx. The current state: Most drivers do now compile but are not yet verfied. This port was effort of a number of people, I rather arbitrarily gave authorship to Guiding Li because he has the largest number of fundamental quashed commits from the Xiamoi repository. Squashed commit of the following: Author: Xiang Xiao <xiaoxiang@pinecone.net> include/nuttx/b2c.h and libx/libc/string: Add non-standard string functions to deal with cases where there are more than 8-bits in a type char. Author: Gregory Nutt <gnutt@nuttx.org> Fix several build issues/missing definitiona needed for OpenAMP build in drivers/. Add OpenAMP code has been reviewed and ran through tools/nxstyle (with all reports accounted for). Author: Xiang Xiao <xiaoxiang@xiaomi.com> tools/: Fix the minor issue in Makefile Author: Gregory Nutt <gnutt@nuttx.org> drivers/rptun/rptun.c: Review for coding standard. Run against tools/nxstyle. tools/LibTargets.mk: Fix some TABs that were turned into spaces by a copy-paste. fs/hostfs: Add configure and build support for hostfs RPC. drivers/timer: Add configure and build support for syslog RTC. drivers/syslog: Add configure and build support for syslog RPC. drivers/serial: Add configure and build support for serial RPC. Kconfig, tools/*.mk. openamp/: Add basic OpenAMP build support. drivers/rptun: Add configure and build support for OpenAMP tunnel drivers. drivers/net: Update Make.defs and Kconfig for OpenSDA support. Remove drivers/clk/clk-rpmsg.c drivers/power/rpmsg_regulator.c. These depend on upstreaming support for a new subsystem based on the clk/regulator is model from Linux. Removed because we want to separate the activities. We will just try to get the basic OpenAMP support in place for now. Remove drivers/misc/misc_rpmsg.c and include/nuttx/misc/misc_rpmsg.h. These are specific to the Xiaomi application. Author: zhuyanlin <zhuyanlin@pinecone.net> This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed. Author: Jianli Dong <dongjianli@pinecone.net> This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed. Author: Guiding Li <liguiding@pinecone.net> This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed.
2019-11-02 18:30:33 +01:00
*
* http://www.apache.org/licenses/LICENSE-2.0
This commit brings in the drivers needed to support OpenAMP. These changes were ported from https://github.com/FishsemiCode/nuttx. The current state: Most drivers do now compile but are not yet verfied. This port was effort of a number of people, I rather arbitrarily gave authorship to Guiding Li because he has the largest number of fundamental quashed commits from the Xiamoi repository. Squashed commit of the following: Author: Xiang Xiao <xiaoxiang@pinecone.net> include/nuttx/b2c.h and libx/libc/string: Add non-standard string functions to deal with cases where there are more than 8-bits in a type char. Author: Gregory Nutt <gnutt@nuttx.org> Fix several build issues/missing definitiona needed for OpenAMP build in drivers/. Add OpenAMP code has been reviewed and ran through tools/nxstyle (with all reports accounted for). Author: Xiang Xiao <xiaoxiang@xiaomi.com> tools/: Fix the minor issue in Makefile Author: Gregory Nutt <gnutt@nuttx.org> drivers/rptun/rptun.c: Review for coding standard. Run against tools/nxstyle. tools/LibTargets.mk: Fix some TABs that were turned into spaces by a copy-paste. fs/hostfs: Add configure and build support for hostfs RPC. drivers/timer: Add configure and build support for syslog RTC. drivers/syslog: Add configure and build support for syslog RPC. drivers/serial: Add configure and build support for serial RPC. Kconfig, tools/*.mk. openamp/: Add basic OpenAMP build support. drivers/rptun: Add configure and build support for OpenAMP tunnel drivers. drivers/net: Update Make.defs and Kconfig for OpenSDA support. Remove drivers/clk/clk-rpmsg.c drivers/power/rpmsg_regulator.c. These depend on upstreaming support for a new subsystem based on the clk/regulator is model from Linux. Removed because we want to separate the activities. We will just try to get the basic OpenAMP support in place for now. Remove drivers/misc/misc_rpmsg.c and include/nuttx/misc/misc_rpmsg.h. These are specific to the Xiaomi application. Author: zhuyanlin <zhuyanlin@pinecone.net> This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed. Author: Jianli Dong <dongjianli@pinecone.net> This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed. Author: Guiding Li <liguiding@pinecone.net> This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed.
2019-11-02 18:30:33 +01:00
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
This commit brings in the drivers needed to support OpenAMP. These changes were ported from https://github.com/FishsemiCode/nuttx. The current state: Most drivers do now compile but are not yet verfied. This port was effort of a number of people, I rather arbitrarily gave authorship to Guiding Li because he has the largest number of fundamental quashed commits from the Xiamoi repository. Squashed commit of the following: Author: Xiang Xiao <xiaoxiang@pinecone.net> include/nuttx/b2c.h and libx/libc/string: Add non-standard string functions to deal with cases where there are more than 8-bits in a type char. Author: Gregory Nutt <gnutt@nuttx.org> Fix several build issues/missing definitiona needed for OpenAMP build in drivers/. Add OpenAMP code has been reviewed and ran through tools/nxstyle (with all reports accounted for). Author: Xiang Xiao <xiaoxiang@xiaomi.com> tools/: Fix the minor issue in Makefile Author: Gregory Nutt <gnutt@nuttx.org> drivers/rptun/rptun.c: Review for coding standard. Run against tools/nxstyle. tools/LibTargets.mk: Fix some TABs that were turned into spaces by a copy-paste. fs/hostfs: Add configure and build support for hostfs RPC. drivers/timer: Add configure and build support for syslog RTC. drivers/syslog: Add configure and build support for syslog RPC. drivers/serial: Add configure and build support for serial RPC. Kconfig, tools/*.mk. openamp/: Add basic OpenAMP build support. drivers/rptun: Add configure and build support for OpenAMP tunnel drivers. drivers/net: Update Make.defs and Kconfig for OpenSDA support. Remove drivers/clk/clk-rpmsg.c drivers/power/rpmsg_regulator.c. These depend on upstreaming support for a new subsystem based on the clk/regulator is model from Linux. Removed because we want to separate the activities. We will just try to get the basic OpenAMP support in place for now. Remove drivers/misc/misc_rpmsg.c and include/nuttx/misc/misc_rpmsg.h. These are specific to the Xiaomi application. Author: zhuyanlin <zhuyanlin@pinecone.net> This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed. Author: Jianli Dong <dongjianli@pinecone.net> This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed. Author: Guiding Li <liguiding@pinecone.net> This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed.
2019-11-02 18:30:33 +01:00
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <nuttx/clock.h>
#include <nuttx/kmalloc.h>
#include <nuttx/rptun/openamp.h>
#include <nuttx/semaphore.h>
#include <nuttx/timers/rpmsg_rtc.h>
#include <errno.h>
#include <string.h>
/****************************************************************************
* Pre-processor definitions
****************************************************************************/
#define RPMSG_RTC_EPT_NAME "rpmsg-rtc"
#define RPMSG_RTC_SET 0
#define RPMSG_RTC_GET 1
#define RPMSG_RTC_ALARM_SET 2
#define RPMSG_RTC_ALARM_CANCEL 3
#define RPMSG_RTC_ALARM_FIRE 4
/****************************************************************************
* Private Types
****************************************************************************/
begin_packed_struct struct rpmsg_rtc_header_s
{
uint32_t command;
int32_t result;
uint64_t cookie;
} end_packed_struct;
begin_packed_struct struct rpmsg_rtc_set_s
{
struct rpmsg_rtc_header_s header;
int64_t sec;
int32_t nsec;
} end_packed_struct;
#define rpmsg_rtc_get_s rpmsg_rtc_set_s
begin_packed_struct struct rpmsg_rtc_alarm_set_s
{
struct rpmsg_rtc_header_s header;
int64_t sec;
int32_t nsec;
int32_t id;
} end_packed_struct;
begin_packed_struct struct rpmsg_rtc_alarm_cancel_s
{
struct rpmsg_rtc_header_s header;
int32_t id;
} end_packed_struct;
#define rpmsg_rtc_alarm_fire_s rpmsg_rtc_alarm_cancel_s
struct rpmsg_rtc_cookie_s
{
FAR struct rpmsg_rtc_header_s *msg;
sem_t sem;
};
/* This is the private type for the RTC state. It must be cast compatible
* with struct rtc_lowerhalf_s.
*/
struct rpmsg_rtc_lowerhalf_s
{
/* This is the contained reference to the read-only, lower-half
* operations vtable (which may lie in FLASH or ROM)
*/
FAR const struct rtc_ops_s *ops;
/* Data following is private to this driver and not visible outside of
* this file.
*/
struct rpmsg_endpoint ept;
FAR const char *cpuname;
#ifdef CONFIG_RTC_ALARM
struct lower_setalarm_s alarminfo[CONFIG_RTC_NALARMS];
#endif
};
/****************************************************************************
* Private Function Prototypes
****************************************************************************/
static void rpmsg_rtc_device_created(FAR struct rpmsg_device *rdev,
FAR void *priv);
This commit brings in the drivers needed to support OpenAMP. These changes were ported from https://github.com/FishsemiCode/nuttx. The current state: Most drivers do now compile but are not yet verfied. This port was effort of a number of people, I rather arbitrarily gave authorship to Guiding Li because he has the largest number of fundamental quashed commits from the Xiamoi repository. Squashed commit of the following: Author: Xiang Xiao <xiaoxiang@pinecone.net> include/nuttx/b2c.h and libx/libc/string: Add non-standard string functions to deal with cases where there are more than 8-bits in a type char. Author: Gregory Nutt <gnutt@nuttx.org> Fix several build issues/missing definitiona needed for OpenAMP build in drivers/. Add OpenAMP code has been reviewed and ran through tools/nxstyle (with all reports accounted for). Author: Xiang Xiao <xiaoxiang@xiaomi.com> tools/: Fix the minor issue in Makefile Author: Gregory Nutt <gnutt@nuttx.org> drivers/rptun/rptun.c: Review for coding standard. Run against tools/nxstyle. tools/LibTargets.mk: Fix some TABs that were turned into spaces by a copy-paste. fs/hostfs: Add configure and build support for hostfs RPC. drivers/timer: Add configure and build support for syslog RTC. drivers/syslog: Add configure and build support for syslog RPC. drivers/serial: Add configure and build support for serial RPC. Kconfig, tools/*.mk. openamp/: Add basic OpenAMP build support. drivers/rptun: Add configure and build support for OpenAMP tunnel drivers. drivers/net: Update Make.defs and Kconfig for OpenSDA support. Remove drivers/clk/clk-rpmsg.c drivers/power/rpmsg_regulator.c. These depend on upstreaming support for a new subsystem based on the clk/regulator is model from Linux. Removed because we want to separate the activities. We will just try to get the basic OpenAMP support in place for now. Remove drivers/misc/misc_rpmsg.c and include/nuttx/misc/misc_rpmsg.h. These are specific to the Xiaomi application. Author: zhuyanlin <zhuyanlin@pinecone.net> This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed. Author: Jianli Dong <dongjianli@pinecone.net> This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed. Author: Guiding Li <liguiding@pinecone.net> This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed.
2019-11-02 18:30:33 +01:00
static void rpmsg_rtc_device_destroy(FAR struct rpmsg_device *rdev,
FAR void *priv);
This commit brings in the drivers needed to support OpenAMP. These changes were ported from https://github.com/FishsemiCode/nuttx. The current state: Most drivers do now compile but are not yet verfied. This port was effort of a number of people, I rather arbitrarily gave authorship to Guiding Li because he has the largest number of fundamental quashed commits from the Xiamoi repository. Squashed commit of the following: Author: Xiang Xiao <xiaoxiang@pinecone.net> include/nuttx/b2c.h and libx/libc/string: Add non-standard string functions to deal with cases where there are more than 8-bits in a type char. Author: Gregory Nutt <gnutt@nuttx.org> Fix several build issues/missing definitiona needed for OpenAMP build in drivers/. Add OpenAMP code has been reviewed and ran through tools/nxstyle (with all reports accounted for). Author: Xiang Xiao <xiaoxiang@xiaomi.com> tools/: Fix the minor issue in Makefile Author: Gregory Nutt <gnutt@nuttx.org> drivers/rptun/rptun.c: Review for coding standard. Run against tools/nxstyle. tools/LibTargets.mk: Fix some TABs that were turned into spaces by a copy-paste. fs/hostfs: Add configure and build support for hostfs RPC. drivers/timer: Add configure and build support for syslog RTC. drivers/syslog: Add configure and build support for syslog RPC. drivers/serial: Add configure and build support for serial RPC. Kconfig, tools/*.mk. openamp/: Add basic OpenAMP build support. drivers/rptun: Add configure and build support for OpenAMP tunnel drivers. drivers/net: Update Make.defs and Kconfig for OpenSDA support. Remove drivers/clk/clk-rpmsg.c drivers/power/rpmsg_regulator.c. These depend on upstreaming support for a new subsystem based on the clk/regulator is model from Linux. Removed because we want to separate the activities. We will just try to get the basic OpenAMP support in place for now. Remove drivers/misc/misc_rpmsg.c and include/nuttx/misc/misc_rpmsg.h. These are specific to the Xiaomi application. Author: zhuyanlin <zhuyanlin@pinecone.net> This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed. Author: Jianli Dong <dongjianli@pinecone.net> This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed. Author: Guiding Li <liguiding@pinecone.net> This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed.
2019-11-02 18:30:33 +01:00
static void rpmsg_rtc_alarm_fire_handler(FAR struct rpmsg_endpoint *ept,
FAR void *data, size_t len, uint32_t src, FAR void *priv);
This commit brings in the drivers needed to support OpenAMP. These changes were ported from https://github.com/FishsemiCode/nuttx. The current state: Most drivers do now compile but are not yet verfied. This port was effort of a number of people, I rather arbitrarily gave authorship to Guiding Li because he has the largest number of fundamental quashed commits from the Xiamoi repository. Squashed commit of the following: Author: Xiang Xiao <xiaoxiang@pinecone.net> include/nuttx/b2c.h and libx/libc/string: Add non-standard string functions to deal with cases where there are more than 8-bits in a type char. Author: Gregory Nutt <gnutt@nuttx.org> Fix several build issues/missing definitiona needed for OpenAMP build in drivers/. Add OpenAMP code has been reviewed and ran through tools/nxstyle (with all reports accounted for). Author: Xiang Xiao <xiaoxiang@xiaomi.com> tools/: Fix the minor issue in Makefile Author: Gregory Nutt <gnutt@nuttx.org> drivers/rptun/rptun.c: Review for coding standard. Run against tools/nxstyle. tools/LibTargets.mk: Fix some TABs that were turned into spaces by a copy-paste. fs/hostfs: Add configure and build support for hostfs RPC. drivers/timer: Add configure and build support for syslog RTC. drivers/syslog: Add configure and build support for syslog RPC. drivers/serial: Add configure and build support for serial RPC. Kconfig, tools/*.mk. openamp/: Add basic OpenAMP build support. drivers/rptun: Add configure and build support for OpenAMP tunnel drivers. drivers/net: Update Make.defs and Kconfig for OpenSDA support. Remove drivers/clk/clk-rpmsg.c drivers/power/rpmsg_regulator.c. These depend on upstreaming support for a new subsystem based on the clk/regulator is model from Linux. Removed because we want to separate the activities. We will just try to get the basic OpenAMP support in place for now. Remove drivers/misc/misc_rpmsg.c and include/nuttx/misc/misc_rpmsg.h. These are specific to the Xiaomi application. Author: zhuyanlin <zhuyanlin@pinecone.net> This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed. Author: Jianli Dong <dongjianli@pinecone.net> This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed. Author: Guiding Li <liguiding@pinecone.net> This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed.
2019-11-02 18:30:33 +01:00
static int rpmsg_rtc_ept_cb(FAR struct rpmsg_endpoint *ept, FAR void *data,
size_t len, uint32_t src, FAR void *priv);
This commit brings in the drivers needed to support OpenAMP. These changes were ported from https://github.com/FishsemiCode/nuttx. The current state: Most drivers do now compile but are not yet verfied. This port was effort of a number of people, I rather arbitrarily gave authorship to Guiding Li because he has the largest number of fundamental quashed commits from the Xiamoi repository. Squashed commit of the following: Author: Xiang Xiao <xiaoxiang@pinecone.net> include/nuttx/b2c.h and libx/libc/string: Add non-standard string functions to deal with cases where there are more than 8-bits in a type char. Author: Gregory Nutt <gnutt@nuttx.org> Fix several build issues/missing definitiona needed for OpenAMP build in drivers/. Add OpenAMP code has been reviewed and ran through tools/nxstyle (with all reports accounted for). Author: Xiang Xiao <xiaoxiang@xiaomi.com> tools/: Fix the minor issue in Makefile Author: Gregory Nutt <gnutt@nuttx.org> drivers/rptun/rptun.c: Review for coding standard. Run against tools/nxstyle. tools/LibTargets.mk: Fix some TABs that were turned into spaces by a copy-paste. fs/hostfs: Add configure and build support for hostfs RPC. drivers/timer: Add configure and build support for syslog RTC. drivers/syslog: Add configure and build support for syslog RPC. drivers/serial: Add configure and build support for serial RPC. Kconfig, tools/*.mk. openamp/: Add basic OpenAMP build support. drivers/rptun: Add configure and build support for OpenAMP tunnel drivers. drivers/net: Update Make.defs and Kconfig for OpenSDA support. Remove drivers/clk/clk-rpmsg.c drivers/power/rpmsg_regulator.c. These depend on upstreaming support for a new subsystem based on the clk/regulator is model from Linux. Removed because we want to separate the activities. We will just try to get the basic OpenAMP support in place for now. Remove drivers/misc/misc_rpmsg.c and include/nuttx/misc/misc_rpmsg.h. These are specific to the Xiaomi application. Author: zhuyanlin <zhuyanlin@pinecone.net> This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed. Author: Jianli Dong <dongjianli@pinecone.net> This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed. Author: Guiding Li <liguiding@pinecone.net> This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed.
2019-11-02 18:30:33 +01:00
static int rpmsg_rtc_send_recv(FAR struct rpmsg_rtc_lowerhalf_s *lower,
uint32_t command, FAR struct rpmsg_rtc_header_s *msg, int len);
This commit brings in the drivers needed to support OpenAMP. These changes were ported from https://github.com/FishsemiCode/nuttx. The current state: Most drivers do now compile but are not yet verfied. This port was effort of a number of people, I rather arbitrarily gave authorship to Guiding Li because he has the largest number of fundamental quashed commits from the Xiamoi repository. Squashed commit of the following: Author: Xiang Xiao <xiaoxiang@pinecone.net> include/nuttx/b2c.h and libx/libc/string: Add non-standard string functions to deal with cases where there are more than 8-bits in a type char. Author: Gregory Nutt <gnutt@nuttx.org> Fix several build issues/missing definitiona needed for OpenAMP build in drivers/. Add OpenAMP code has been reviewed and ran through tools/nxstyle (with all reports accounted for). Author: Xiang Xiao <xiaoxiang@xiaomi.com> tools/: Fix the minor issue in Makefile Author: Gregory Nutt <gnutt@nuttx.org> drivers/rptun/rptun.c: Review for coding standard. Run against tools/nxstyle. tools/LibTargets.mk: Fix some TABs that were turned into spaces by a copy-paste. fs/hostfs: Add configure and build support for hostfs RPC. drivers/timer: Add configure and build support for syslog RTC. drivers/syslog: Add configure and build support for syslog RPC. drivers/serial: Add configure and build support for serial RPC. Kconfig, tools/*.mk. openamp/: Add basic OpenAMP build support. drivers/rptun: Add configure and build support for OpenAMP tunnel drivers. drivers/net: Update Make.defs and Kconfig for OpenSDA support. Remove drivers/clk/clk-rpmsg.c drivers/power/rpmsg_regulator.c. These depend on upstreaming support for a new subsystem based on the clk/regulator is model from Linux. Removed because we want to separate the activities. We will just try to get the basic OpenAMP support in place for now. Remove drivers/misc/misc_rpmsg.c and include/nuttx/misc/misc_rpmsg.h. These are specific to the Xiaomi application. Author: zhuyanlin <zhuyanlin@pinecone.net> This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed. Author: Jianli Dong <dongjianli@pinecone.net> This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed. Author: Guiding Li <liguiding@pinecone.net> This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed.
2019-11-02 18:30:33 +01:00
static int rpmsg_rtc_rdtime(FAR struct rtc_lowerhalf_s *lower,
FAR struct rtc_time *rtctime);
This commit brings in the drivers needed to support OpenAMP. These changes were ported from https://github.com/FishsemiCode/nuttx. The current state: Most drivers do now compile but are not yet verfied. This port was effort of a number of people, I rather arbitrarily gave authorship to Guiding Li because he has the largest number of fundamental quashed commits from the Xiamoi repository. Squashed commit of the following: Author: Xiang Xiao <xiaoxiang@pinecone.net> include/nuttx/b2c.h and libx/libc/string: Add non-standard string functions to deal with cases where there are more than 8-bits in a type char. Author: Gregory Nutt <gnutt@nuttx.org> Fix several build issues/missing definitiona needed for OpenAMP build in drivers/. Add OpenAMP code has been reviewed and ran through tools/nxstyle (with all reports accounted for). Author: Xiang Xiao <xiaoxiang@xiaomi.com> tools/: Fix the minor issue in Makefile Author: Gregory Nutt <gnutt@nuttx.org> drivers/rptun/rptun.c: Review for coding standard. Run against tools/nxstyle. tools/LibTargets.mk: Fix some TABs that were turned into spaces by a copy-paste. fs/hostfs: Add configure and build support for hostfs RPC. drivers/timer: Add configure and build support for syslog RTC. drivers/syslog: Add configure and build support for syslog RPC. drivers/serial: Add configure and build support for serial RPC. Kconfig, tools/*.mk. openamp/: Add basic OpenAMP build support. drivers/rptun: Add configure and build support for OpenAMP tunnel drivers. drivers/net: Update Make.defs and Kconfig for OpenSDA support. Remove drivers/clk/clk-rpmsg.c drivers/power/rpmsg_regulator.c. These depend on upstreaming support for a new subsystem based on the clk/regulator is model from Linux. Removed because we want to separate the activities. We will just try to get the basic OpenAMP support in place for now. Remove drivers/misc/misc_rpmsg.c and include/nuttx/misc/misc_rpmsg.h. These are specific to the Xiaomi application. Author: zhuyanlin <zhuyanlin@pinecone.net> This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed. Author: Jianli Dong <dongjianli@pinecone.net> This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed. Author: Guiding Li <liguiding@pinecone.net> This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed.
2019-11-02 18:30:33 +01:00
static int rpmsg_rtc_settime(FAR struct rtc_lowerhalf_s *lower,
FAR const struct rtc_time *rtctime);
This commit brings in the drivers needed to support OpenAMP. These changes were ported from https://github.com/FishsemiCode/nuttx. The current state: Most drivers do now compile but are not yet verfied. This port was effort of a number of people, I rather arbitrarily gave authorship to Guiding Li because he has the largest number of fundamental quashed commits from the Xiamoi repository. Squashed commit of the following: Author: Xiang Xiao <xiaoxiang@pinecone.net> include/nuttx/b2c.h and libx/libc/string: Add non-standard string functions to deal with cases where there are more than 8-bits in a type char. Author: Gregory Nutt <gnutt@nuttx.org> Fix several build issues/missing definitiona needed for OpenAMP build in drivers/. Add OpenAMP code has been reviewed and ran through tools/nxstyle (with all reports accounted for). Author: Xiang Xiao <xiaoxiang@xiaomi.com> tools/: Fix the minor issue in Makefile Author: Gregory Nutt <gnutt@nuttx.org> drivers/rptun/rptun.c: Review for coding standard. Run against tools/nxstyle. tools/LibTargets.mk: Fix some TABs that were turned into spaces by a copy-paste. fs/hostfs: Add configure and build support for hostfs RPC. drivers/timer: Add configure and build support for syslog RTC. drivers/syslog: Add configure and build support for syslog RPC. drivers/serial: Add configure and build support for serial RPC. Kconfig, tools/*.mk. openamp/: Add basic OpenAMP build support. drivers/rptun: Add configure and build support for OpenAMP tunnel drivers. drivers/net: Update Make.defs and Kconfig for OpenSDA support. Remove drivers/clk/clk-rpmsg.c drivers/power/rpmsg_regulator.c. These depend on upstreaming support for a new subsystem based on the clk/regulator is model from Linux. Removed because we want to separate the activities. We will just try to get the basic OpenAMP support in place for now. Remove drivers/misc/misc_rpmsg.c and include/nuttx/misc/misc_rpmsg.h. These are specific to the Xiaomi application. Author: zhuyanlin <zhuyanlin@pinecone.net> This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed. Author: Jianli Dong <dongjianli@pinecone.net> This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed. Author: Guiding Li <liguiding@pinecone.net> This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed.
2019-11-02 18:30:33 +01:00
static bool rpmsg_rtc_havesettime(FAR struct rtc_lowerhalf_s *lower);
#ifdef CONFIG_RTC_ALARM
static int rpmsg_rtc_setalarm(FAR struct rtc_lowerhalf_s *lower_,
FAR const struct lower_setalarm_s *alarminfo);
This commit brings in the drivers needed to support OpenAMP. These changes were ported from https://github.com/FishsemiCode/nuttx. The current state: Most drivers do now compile but are not yet verfied. This port was effort of a number of people, I rather arbitrarily gave authorship to Guiding Li because he has the largest number of fundamental quashed commits from the Xiamoi repository. Squashed commit of the following: Author: Xiang Xiao <xiaoxiang@pinecone.net> include/nuttx/b2c.h and libx/libc/string: Add non-standard string functions to deal with cases where there are more than 8-bits in a type char. Author: Gregory Nutt <gnutt@nuttx.org> Fix several build issues/missing definitiona needed for OpenAMP build in drivers/. Add OpenAMP code has been reviewed and ran through tools/nxstyle (with all reports accounted for). Author: Xiang Xiao <xiaoxiang@xiaomi.com> tools/: Fix the minor issue in Makefile Author: Gregory Nutt <gnutt@nuttx.org> drivers/rptun/rptun.c: Review for coding standard. Run against tools/nxstyle. tools/LibTargets.mk: Fix some TABs that were turned into spaces by a copy-paste. fs/hostfs: Add configure and build support for hostfs RPC. drivers/timer: Add configure and build support for syslog RTC. drivers/syslog: Add configure and build support for syslog RPC. drivers/serial: Add configure and build support for serial RPC. Kconfig, tools/*.mk. openamp/: Add basic OpenAMP build support. drivers/rptun: Add configure and build support for OpenAMP tunnel drivers. drivers/net: Update Make.defs and Kconfig for OpenSDA support. Remove drivers/clk/clk-rpmsg.c drivers/power/rpmsg_regulator.c. These depend on upstreaming support for a new subsystem based on the clk/regulator is model from Linux. Removed because we want to separate the activities. We will just try to get the basic OpenAMP support in place for now. Remove drivers/misc/misc_rpmsg.c and include/nuttx/misc/misc_rpmsg.h. These are specific to the Xiaomi application. Author: zhuyanlin <zhuyanlin@pinecone.net> This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed. Author: Jianli Dong <dongjianli@pinecone.net> This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed. Author: Guiding Li <liguiding@pinecone.net> This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed.
2019-11-02 18:30:33 +01:00
static int rpmsg_rtc_setrelative(FAR struct rtc_lowerhalf_s *lower,
FAR const struct lower_setrelative_s *relinfo);
This commit brings in the drivers needed to support OpenAMP. These changes were ported from https://github.com/FishsemiCode/nuttx. The current state: Most drivers do now compile but are not yet verfied. This port was effort of a number of people, I rather arbitrarily gave authorship to Guiding Li because he has the largest number of fundamental quashed commits from the Xiamoi repository. Squashed commit of the following: Author: Xiang Xiao <xiaoxiang@pinecone.net> include/nuttx/b2c.h and libx/libc/string: Add non-standard string functions to deal with cases where there are more than 8-bits in a type char. Author: Gregory Nutt <gnutt@nuttx.org> Fix several build issues/missing definitiona needed for OpenAMP build in drivers/. Add OpenAMP code has been reviewed and ran through tools/nxstyle (with all reports accounted for). Author: Xiang Xiao <xiaoxiang@xiaomi.com> tools/: Fix the minor issue in Makefile Author: Gregory Nutt <gnutt@nuttx.org> drivers/rptun/rptun.c: Review for coding standard. Run against tools/nxstyle. tools/LibTargets.mk: Fix some TABs that were turned into spaces by a copy-paste. fs/hostfs: Add configure and build support for hostfs RPC. drivers/timer: Add configure and build support for syslog RTC. drivers/syslog: Add configure and build support for syslog RPC. drivers/serial: Add configure and build support for serial RPC. Kconfig, tools/*.mk. openamp/: Add basic OpenAMP build support. drivers/rptun: Add configure and build support for OpenAMP tunnel drivers. drivers/net: Update Make.defs and Kconfig for OpenSDA support. Remove drivers/clk/clk-rpmsg.c drivers/power/rpmsg_regulator.c. These depend on upstreaming support for a new subsystem based on the clk/regulator is model from Linux. Removed because we want to separate the activities. We will just try to get the basic OpenAMP support in place for now. Remove drivers/misc/misc_rpmsg.c and include/nuttx/misc/misc_rpmsg.h. These are specific to the Xiaomi application. Author: zhuyanlin <zhuyanlin@pinecone.net> This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed. Author: Jianli Dong <dongjianli@pinecone.net> This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed. Author: Guiding Li <liguiding@pinecone.net> This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed.
2019-11-02 18:30:33 +01:00
static int rpmsg_rtc_cancelalarm(FAR struct rtc_lowerhalf_s *lower,
int alarmid);
This commit brings in the drivers needed to support OpenAMP. These changes were ported from https://github.com/FishsemiCode/nuttx. The current state: Most drivers do now compile but are not yet verfied. This port was effort of a number of people, I rather arbitrarily gave authorship to Guiding Li because he has the largest number of fundamental quashed commits from the Xiamoi repository. Squashed commit of the following: Author: Xiang Xiao <xiaoxiang@pinecone.net> include/nuttx/b2c.h and libx/libc/string: Add non-standard string functions to deal with cases where there are more than 8-bits in a type char. Author: Gregory Nutt <gnutt@nuttx.org> Fix several build issues/missing definitiona needed for OpenAMP build in drivers/. Add OpenAMP code has been reviewed and ran through tools/nxstyle (with all reports accounted for). Author: Xiang Xiao <xiaoxiang@xiaomi.com> tools/: Fix the minor issue in Makefile Author: Gregory Nutt <gnutt@nuttx.org> drivers/rptun/rptun.c: Review for coding standard. Run against tools/nxstyle. tools/LibTargets.mk: Fix some TABs that were turned into spaces by a copy-paste. fs/hostfs: Add configure and build support for hostfs RPC. drivers/timer: Add configure and build support for syslog RTC. drivers/syslog: Add configure and build support for syslog RPC. drivers/serial: Add configure and build support for serial RPC. Kconfig, tools/*.mk. openamp/: Add basic OpenAMP build support. drivers/rptun: Add configure and build support for OpenAMP tunnel drivers. drivers/net: Update Make.defs and Kconfig for OpenSDA support. Remove drivers/clk/clk-rpmsg.c drivers/power/rpmsg_regulator.c. These depend on upstreaming support for a new subsystem based on the clk/regulator is model from Linux. Removed because we want to separate the activities. We will just try to get the basic OpenAMP support in place for now. Remove drivers/misc/misc_rpmsg.c and include/nuttx/misc/misc_rpmsg.h. These are specific to the Xiaomi application. Author: zhuyanlin <zhuyanlin@pinecone.net> This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed. Author: Jianli Dong <dongjianli@pinecone.net> This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed. Author: Guiding Li <liguiding@pinecone.net> This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed.
2019-11-02 18:30:33 +01:00
static int rpmsg_rtc_rdalarm(FAR struct rtc_lowerhalf_s *lower_,
FAR struct lower_rdalarm_s *alarminfo);
This commit brings in the drivers needed to support OpenAMP. These changes were ported from https://github.com/FishsemiCode/nuttx. The current state: Most drivers do now compile but are not yet verfied. This port was effort of a number of people, I rather arbitrarily gave authorship to Guiding Li because he has the largest number of fundamental quashed commits from the Xiamoi repository. Squashed commit of the following: Author: Xiang Xiao <xiaoxiang@pinecone.net> include/nuttx/b2c.h and libx/libc/string: Add non-standard string functions to deal with cases where there are more than 8-bits in a type char. Author: Gregory Nutt <gnutt@nuttx.org> Fix several build issues/missing definitiona needed for OpenAMP build in drivers/. Add OpenAMP code has been reviewed and ran through tools/nxstyle (with all reports accounted for). Author: Xiang Xiao <xiaoxiang@xiaomi.com> tools/: Fix the minor issue in Makefile Author: Gregory Nutt <gnutt@nuttx.org> drivers/rptun/rptun.c: Review for coding standard. Run against tools/nxstyle. tools/LibTargets.mk: Fix some TABs that were turned into spaces by a copy-paste. fs/hostfs: Add configure and build support for hostfs RPC. drivers/timer: Add configure and build support for syslog RTC. drivers/syslog: Add configure and build support for syslog RPC. drivers/serial: Add configure and build support for serial RPC. Kconfig, tools/*.mk. openamp/: Add basic OpenAMP build support. drivers/rptun: Add configure and build support for OpenAMP tunnel drivers. drivers/net: Update Make.defs and Kconfig for OpenSDA support. Remove drivers/clk/clk-rpmsg.c drivers/power/rpmsg_regulator.c. These depend on upstreaming support for a new subsystem based on the clk/regulator is model from Linux. Removed because we want to separate the activities. We will just try to get the basic OpenAMP support in place for now. Remove drivers/misc/misc_rpmsg.c and include/nuttx/misc/misc_rpmsg.h. These are specific to the Xiaomi application. Author: zhuyanlin <zhuyanlin@pinecone.net> This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed. Author: Jianli Dong <dongjianli@pinecone.net> This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed. Author: Guiding Li <liguiding@pinecone.net> This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed.
2019-11-02 18:30:33 +01:00
#endif
/****************************************************************************
* Private Data
****************************************************************************/
static const struct rtc_ops_s g_rpmsg_rtc_ops =
{
.rdtime = rpmsg_rtc_rdtime,
.settime = rpmsg_rtc_settime,
.havesettime = rpmsg_rtc_havesettime,
#ifdef CONFIG_RTC_ALARM
.setalarm = rpmsg_rtc_setalarm,
.setrelative = rpmsg_rtc_setrelative,
.cancelalarm = rpmsg_rtc_cancelalarm,
.rdalarm = rpmsg_rtc_rdalarm,
#endif
};
/****************************************************************************
* Private Functions
****************************************************************************/
static void rpmsg_rtc_device_created(FAR struct rpmsg_device *rdev,
FAR void *priv)
{
FAR struct rpmsg_rtc_lowerhalf_s *lower = priv;
if (strcmp(lower->cpuname, rpmsg_get_cpuname(rdev)) == 0)
{
lower->ept.priv = lower;
rpmsg_create_ept(&lower->ept, rdev, RPMSG_RTC_EPT_NAME,
RPMSG_ADDR_ANY, RPMSG_ADDR_ANY,
rpmsg_rtc_ept_cb, NULL);
}
}
static void rpmsg_rtc_device_destroy(FAR struct rpmsg_device *rdev,
FAR void *priv)
{
FAR struct rpmsg_rtc_lowerhalf_s *lower = priv;
if (strcmp(lower->cpuname, rpmsg_get_cpuname(rdev)) == 0)
{
rpmsg_destroy_ept(&lower->ept);
}
}
static void rpmsg_rtc_alarm_fire_handler(FAR struct rpmsg_endpoint *ept,
FAR void *data, size_t len,
uint32_t src, FAR void *priv)
{
#ifdef CONFIG_RTC_ALARM
FAR struct rpmsg_rtc_lowerhalf_s *lower = priv;
FAR struct rpmsg_rtc_alarm_fire_s *msg = data;
FAR struct lower_setalarm_s *alarminfo = &lower->alarminfo[msg->id];
alarminfo->cb(alarminfo->priv, alarminfo->id);
#endif
}
static int rpmsg_rtc_ept_cb(FAR struct rpmsg_endpoint *ept, FAR void *data,
size_t len, uint32_t src, FAR void *priv)
{
FAR struct rpmsg_rtc_header_s *header = data;
FAR struct rpmsg_rtc_cookie_s *cookie =
(struct rpmsg_rtc_cookie_s *)(uintptr_t)header->cookie;
switch (header->command)
{
case RPMSG_RTC_ALARM_FIRE:
rpmsg_rtc_alarm_fire_handler(ept, data, len, src, priv);
break;
default:
if (cookie)
{
memcpy(cookie->msg, data, len);
nxsem_post(&cookie->sem);
}
break;
}
return 0;
}
static int rpmsg_rtc_send_recv(FAR struct rpmsg_rtc_lowerhalf_s *lower,
uint32_t command,
FAR struct rpmsg_rtc_header_s *msg, int len)
{
FAR struct rpmsg_rtc_cookie_s cookie;
int ret;
nxsem_init(&cookie.sem, 0, 0);
nxsem_set_protocol(&cookie.sem, SEM_PRIO_NONE);
This commit brings in the drivers needed to support OpenAMP. These changes were ported from https://github.com/FishsemiCode/nuttx. The current state: Most drivers do now compile but are not yet verfied. This port was effort of a number of people, I rather arbitrarily gave authorship to Guiding Li because he has the largest number of fundamental quashed commits from the Xiamoi repository. Squashed commit of the following: Author: Xiang Xiao <xiaoxiang@pinecone.net> include/nuttx/b2c.h and libx/libc/string: Add non-standard string functions to deal with cases where there are more than 8-bits in a type char. Author: Gregory Nutt <gnutt@nuttx.org> Fix several build issues/missing definitiona needed for OpenAMP build in drivers/. Add OpenAMP code has been reviewed and ran through tools/nxstyle (with all reports accounted for). Author: Xiang Xiao <xiaoxiang@xiaomi.com> tools/: Fix the minor issue in Makefile Author: Gregory Nutt <gnutt@nuttx.org> drivers/rptun/rptun.c: Review for coding standard. Run against tools/nxstyle. tools/LibTargets.mk: Fix some TABs that were turned into spaces by a copy-paste. fs/hostfs: Add configure and build support for hostfs RPC. drivers/timer: Add configure and build support for syslog RTC. drivers/syslog: Add configure and build support for syslog RPC. drivers/serial: Add configure and build support for serial RPC. Kconfig, tools/*.mk. openamp/: Add basic OpenAMP build support. drivers/rptun: Add configure and build support for OpenAMP tunnel drivers. drivers/net: Update Make.defs and Kconfig for OpenSDA support. Remove drivers/clk/clk-rpmsg.c drivers/power/rpmsg_regulator.c. These depend on upstreaming support for a new subsystem based on the clk/regulator is model from Linux. Removed because we want to separate the activities. We will just try to get the basic OpenAMP support in place for now. Remove drivers/misc/misc_rpmsg.c and include/nuttx/misc/misc_rpmsg.h. These are specific to the Xiaomi application. Author: zhuyanlin <zhuyanlin@pinecone.net> This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed. Author: Jianli Dong <dongjianli@pinecone.net> This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed. Author: Guiding Li <liguiding@pinecone.net> This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed.
2019-11-02 18:30:33 +01:00
cookie.msg = msg;
msg->command = command;
msg->result = -ENXIO;
msg->cookie = (uintptr_t)&cookie;
ret = rpmsg_send(&lower->ept, msg, len);
if (ret < 0)
{
goto fail;
}
ret = nxsem_wait_uninterruptible(&cookie.sem);
if (ret == 0)
This commit brings in the drivers needed to support OpenAMP. These changes were ported from https://github.com/FishsemiCode/nuttx. The current state: Most drivers do now compile but are not yet verfied. This port was effort of a number of people, I rather arbitrarily gave authorship to Guiding Li because he has the largest number of fundamental quashed commits from the Xiamoi repository. Squashed commit of the following: Author: Xiang Xiao <xiaoxiang@pinecone.net> include/nuttx/b2c.h and libx/libc/string: Add non-standard string functions to deal with cases where there are more than 8-bits in a type char. Author: Gregory Nutt <gnutt@nuttx.org> Fix several build issues/missing definitiona needed for OpenAMP build in drivers/. Add OpenAMP code has been reviewed and ran through tools/nxstyle (with all reports accounted for). Author: Xiang Xiao <xiaoxiang@xiaomi.com> tools/: Fix the minor issue in Makefile Author: Gregory Nutt <gnutt@nuttx.org> drivers/rptun/rptun.c: Review for coding standard. Run against tools/nxstyle. tools/LibTargets.mk: Fix some TABs that were turned into spaces by a copy-paste. fs/hostfs: Add configure and build support for hostfs RPC. drivers/timer: Add configure and build support for syslog RTC. drivers/syslog: Add configure and build support for syslog RPC. drivers/serial: Add configure and build support for serial RPC. Kconfig, tools/*.mk. openamp/: Add basic OpenAMP build support. drivers/rptun: Add configure and build support for OpenAMP tunnel drivers. drivers/net: Update Make.defs and Kconfig for OpenSDA support. Remove drivers/clk/clk-rpmsg.c drivers/power/rpmsg_regulator.c. These depend on upstreaming support for a new subsystem based on the clk/regulator is model from Linux. Removed because we want to separate the activities. We will just try to get the basic OpenAMP support in place for now. Remove drivers/misc/misc_rpmsg.c and include/nuttx/misc/misc_rpmsg.h. These are specific to the Xiaomi application. Author: zhuyanlin <zhuyanlin@pinecone.net> This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed. Author: Jianli Dong <dongjianli@pinecone.net> This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed. Author: Guiding Li <liguiding@pinecone.net> This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed.
2019-11-02 18:30:33 +01:00
{
ret = msg->result;
This commit brings in the drivers needed to support OpenAMP. These changes were ported from https://github.com/FishsemiCode/nuttx. The current state: Most drivers do now compile but are not yet verfied. This port was effort of a number of people, I rather arbitrarily gave authorship to Guiding Li because he has the largest number of fundamental quashed commits from the Xiamoi repository. Squashed commit of the following: Author: Xiang Xiao <xiaoxiang@pinecone.net> include/nuttx/b2c.h and libx/libc/string: Add non-standard string functions to deal with cases where there are more than 8-bits in a type char. Author: Gregory Nutt <gnutt@nuttx.org> Fix several build issues/missing definitiona needed for OpenAMP build in drivers/. Add OpenAMP code has been reviewed and ran through tools/nxstyle (with all reports accounted for). Author: Xiang Xiao <xiaoxiang@xiaomi.com> tools/: Fix the minor issue in Makefile Author: Gregory Nutt <gnutt@nuttx.org> drivers/rptun/rptun.c: Review for coding standard. Run against tools/nxstyle. tools/LibTargets.mk: Fix some TABs that were turned into spaces by a copy-paste. fs/hostfs: Add configure and build support for hostfs RPC. drivers/timer: Add configure and build support for syslog RTC. drivers/syslog: Add configure and build support for syslog RPC. drivers/serial: Add configure and build support for serial RPC. Kconfig, tools/*.mk. openamp/: Add basic OpenAMP build support. drivers/rptun: Add configure and build support for OpenAMP tunnel drivers. drivers/net: Update Make.defs and Kconfig for OpenSDA support. Remove drivers/clk/clk-rpmsg.c drivers/power/rpmsg_regulator.c. These depend on upstreaming support for a new subsystem based on the clk/regulator is model from Linux. Removed because we want to separate the activities. We will just try to get the basic OpenAMP support in place for now. Remove drivers/misc/misc_rpmsg.c and include/nuttx/misc/misc_rpmsg.h. These are specific to the Xiaomi application. Author: zhuyanlin <zhuyanlin@pinecone.net> This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed. Author: Jianli Dong <dongjianli@pinecone.net> This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed. Author: Guiding Li <liguiding@pinecone.net> This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed.
2019-11-02 18:30:33 +01:00
}
fail:
nxsem_destroy(&cookie.sem);
return ret;
}
static int rpmsg_rtc_rdtime(FAR struct rtc_lowerhalf_s *lower,
FAR struct rtc_time *rtctime)
{
struct rpmsg_rtc_get_s msg;
int ret;
ret = rpmsg_rtc_send_recv((FAR struct rpmsg_rtc_lowerhalf_s *)lower,
RPMSG_RTC_GET, (struct rpmsg_rtc_header_s *)&msg, sizeof(msg));
if (ret >= 0)
{
time_t time = msg.sec;
gmtime_r(&time, (FAR struct tm *)rtctime);
rtctime->tm_nsec = msg.nsec;
}
return ret;
}
static int rpmsg_rtc_settime(FAR struct rtc_lowerhalf_s *lower,
FAR const struct rtc_time *rtctime)
{
struct rpmsg_rtc_set_s msg =
{
.sec = mktime((FAR struct tm *)rtctime),
.nsec = rtctime->tm_nsec,
};
return rpmsg_rtc_send_recv((FAR struct rpmsg_rtc_lowerhalf_s *)lower,
RPMSG_RTC_SET, (struct rpmsg_rtc_header_s *)&msg, sizeof(msg));
}
static bool rpmsg_rtc_havesettime(FAR struct rtc_lowerhalf_s *lower)
{
return true;
}
#ifdef CONFIG_RTC_ALARM
static int rpmsg_rtc_setalarm(FAR struct rtc_lowerhalf_s *lower_,
FAR const struct lower_setalarm_s *alarminfo)
{
FAR struct rpmsg_rtc_lowerhalf_s *lower =
(FAR struct rpmsg_rtc_lowerhalf_s *)lower_;
struct rpmsg_rtc_alarm_set_s msg =
{
.sec = mktime((FAR struct tm *)&alarminfo->time),
.nsec = alarminfo->time.tm_nsec,
.id = alarminfo->id,
};
int ret;
ret = rpmsg_rtc_send_recv(lower, RPMSG_RTC_ALARM_SET,
(struct rpmsg_rtc_header_s *)&msg, sizeof(msg));
if (ret >= 0)
{
lower->alarminfo[alarminfo->id] = *alarminfo;
}
return ret;
}
static int
rpmsg_rtc_setrelative(FAR struct rtc_lowerhalf_s *lower,
FAR const struct lower_setrelative_s *relinfo)
This commit brings in the drivers needed to support OpenAMP. These changes were ported from https://github.com/FishsemiCode/nuttx. The current state: Most drivers do now compile but are not yet verfied. This port was effort of a number of people, I rather arbitrarily gave authorship to Guiding Li because he has the largest number of fundamental quashed commits from the Xiamoi repository. Squashed commit of the following: Author: Xiang Xiao <xiaoxiang@pinecone.net> include/nuttx/b2c.h and libx/libc/string: Add non-standard string functions to deal with cases where there are more than 8-bits in a type char. Author: Gregory Nutt <gnutt@nuttx.org> Fix several build issues/missing definitiona needed for OpenAMP build in drivers/. Add OpenAMP code has been reviewed and ran through tools/nxstyle (with all reports accounted for). Author: Xiang Xiao <xiaoxiang@xiaomi.com> tools/: Fix the minor issue in Makefile Author: Gregory Nutt <gnutt@nuttx.org> drivers/rptun/rptun.c: Review for coding standard. Run against tools/nxstyle. tools/LibTargets.mk: Fix some TABs that were turned into spaces by a copy-paste. fs/hostfs: Add configure and build support for hostfs RPC. drivers/timer: Add configure and build support for syslog RTC. drivers/syslog: Add configure and build support for syslog RPC. drivers/serial: Add configure and build support for serial RPC. Kconfig, tools/*.mk. openamp/: Add basic OpenAMP build support. drivers/rptun: Add configure and build support for OpenAMP tunnel drivers. drivers/net: Update Make.defs and Kconfig for OpenSDA support. Remove drivers/clk/clk-rpmsg.c drivers/power/rpmsg_regulator.c. These depend on upstreaming support for a new subsystem based on the clk/regulator is model from Linux. Removed because we want to separate the activities. We will just try to get the basic OpenAMP support in place for now. Remove drivers/misc/misc_rpmsg.c and include/nuttx/misc/misc_rpmsg.h. These are specific to the Xiaomi application. Author: zhuyanlin <zhuyanlin@pinecone.net> This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed. Author: Jianli Dong <dongjianli@pinecone.net> This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed. Author: Guiding Li <liguiding@pinecone.net> This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed.
2019-11-02 18:30:33 +01:00
{
struct lower_setalarm_s alarminfo =
{
.id = relinfo->id,
.cb = relinfo->cb,
.priv = relinfo->priv,
};
time_t time;
rpmsg_rtc_rdtime(lower, &alarminfo.time);
time = mktime((FAR struct tm *)&alarminfo.time);
time = time + relinfo->reltime;
gmtime_r(&time, (FAR struct tm *)&alarminfo.time);
return rpmsg_rtc_setalarm(lower, &alarminfo);
}
static int rpmsg_rtc_cancelalarm(FAR struct rtc_lowerhalf_s *lower,
int alarmid)
{
struct rpmsg_rtc_alarm_cancel_s msg =
{
.id = alarmid,
};
return rpmsg_rtc_send_recv((FAR struct rpmsg_rtc_lowerhalf_s *)lower,
RPMSG_RTC_ALARM_CANCEL, (struct rpmsg_rtc_header_s *)&msg,
sizeof(msg));
}
static int rpmsg_rtc_rdalarm(FAR struct rtc_lowerhalf_s *lower_,
FAR struct lower_rdalarm_s *alarminfo)
{
FAR struct rpmsg_rtc_lowerhalf_s *lower =
(FAR struct rpmsg_rtc_lowerhalf_s *)lower_;
*alarminfo->time = lower->alarminfo[alarminfo->id].time;
return 0;
}
#endif
/****************************************************************************
* Name: rpmsg_rtc_initialize
*
* Description:
*
* Take remote core RTC as external RTC hardware through rpmsg.
*
* Input Parameters:
* cpuname - current cpu name
* minor - device minor number
*
* Returned Value:
* Zero (OK) on success; a negated errno on failure
*
****************************************************************************/
FAR struct rtc_lowerhalf_s *rpmsg_rtc_initialize(FAR const char *cpuname,
int minor)
{
FAR struct rpmsg_rtc_lowerhalf_s *lower;
lower = kmm_zalloc(sizeof(*lower));
if (lower)
{
lower->ops = &g_rpmsg_rtc_ops;
lower->cpuname = cpuname;
rpmsg_register_callback(lower,
rpmsg_rtc_device_created,
rpmsg_rtc_device_destroy,
NULL);
rtc_initialize(minor, (FAR struct rtc_lowerhalf_s *)lower);
}
return (FAR struct rtc_lowerhalf_s *)lower;
}