sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
b9a9ba7dd0
nuttx/drivers/wireless/ieee802154/mrf24j40/mrf24j40.c

2506 lines
64 KiB
C
Raw Normal View History

drivers/wireless/ieee802154: Moved radios to individual sub-directories
2017-07-03 06:33:17 +02:00
/****************************************************************************
* drivers/wireless/ieee802154/mrf24j40/mrf24j40.c
*
* Copyright (C) 2015-2016 Sebastien Lorquet. All rights reserved.
* Copyright (C) 2017 Verge Inc. All rights reserved.
* Author: Sebastien Lorquet <sebastien@lorquet.fr>
* Author: Anthony Merlino <anthony@vergeaero.com>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <assert.h>
#include <debug.h>
#include <sys/types.h>
#include <stdio.h>
#include <stdint.h>
#include <string.h>
#include <errno.h>
#include <semaphore.h>
#include <nuttx/arch.h>
#include <nuttx/kmalloc.h>
#include <nuttx/wqueue.h>
#include <nuttx/semaphore.h>
#include <nuttx/fs/fs.h>
#include <nuttx/spi/spi.h>
#include <nuttx/mm/iob.h>
#include <nuttx/wireless/ieee802154/mrf24j40.h>
#include <nuttx/wireless/ieee802154/ieee802154_radio.h>
#include <nuttx/wireless/ieee802154/ieee802154_mac.h>
#include "mrf24j40.h"
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
#ifndef CONFIG_SCHED_HPWORK
# error High priority work queue required in this driver
#endif
#ifndef CONFIG_IEEE802154_MRF24J40_SPIMODE
# define CONFIG_IEEE802154_MRF24J40_SPIMODE SPIDEV_MODE0
#endif
#ifndef CONFIG_IEEE802154_MRF24J40_FREQUENCY
# define CONFIG_IEEE802154_MRF24J40_FREQUENCY 8000000
#endif
#ifndef CONFIG_SPI_EXCHANGE
# error CONFIG_SPI_EXCHANGE required for this driver
#endif
/* Definitions for the device structure */
#define MRF24J40_RXMODE_NORMAL 0
#define MRF24J40_RXMODE_PROMISC 1
#define MRF24J40_RXMODE_NOCRC 2
#define MRF24J40_MODE_DEVICE 0
#define MRF24J40_MODE_COORD 1
#define MRF24J40_MODE_PANCOORD 2
/* Definitions for PA control on high power modules */
#define MRF24J40_PA_AUTO 1
#define MRF24J40_PA_ED 2
#define MRF24J40_PA_SLEEP 3
#define MRF24J40_GTS_SLOTS 2
/* Clock configuration macros */
#define MRF24J40_SLPCLKPER_100KHZ ((1000 * 1000 * 1000)/100000) /* 10ns */
#define MRF24J40_SLPCLKPER_32KHZ ((1000 * 1000 * 1000)/32000) /* 31.25ns */
#define MRF24J40_BEACONINTERVAL_NSEC(beaconorder) \
(IEEE802154_BASE_SUPERFRAME_DURATION * (1 << beaconorder) * (16 *1000))
/* For now I am just setting the REMCNT to the maximum while staying in multiples
* of 10000 (100khz period) */
#define MRF24J40_REMCNT 60000
#define MRF24J40_REMCNT_NSEC (MRF24J40_REMCNT * 50)
#define MRF24J40_MAINCNT(bo, clkper) \
((MRF24J40_BEACONINTERVAL_NSEC(bo) - MRF24J40_REMCNT_NSEC) / \
clkper)
/* Formula for calculating default macMaxFrameWaitTime is on pg. 130
*
* For PHYs other than CSS and UWB, the attribute phyMaxFrameDuration is given by:
*
* phyMaxFrameDuration = phySHRDuration +
* ceiling([aMaxPHYPacketSize + 1] x phySymbolsPerOctet)
*
* where ceiling() is a function that returns the smallest integer value greater
* than or equal to its argument value. [1] pg. 158
*/
#define MRF24J40_DEFAULT_MAX_FRAME_WAITTIME 1824
#define MRF24J40_SYMBOL_DURATION_PS 16000000
/****************************************************************************
* Private Types
****************************************************************************/
/* A MRF24J40 device instance */
struct mrf24j40_radio_s
{
struct ieee802154_radio_s radio; /* The public device instance */
FAR struct ieee802154_radiocb_s *radiocb; /* Registered callbacks */
/* Low-level MCU-specific support */
FAR const struct mrf24j40_lower_s *lower;
FAR struct spi_dev_s *spi; /* Saved SPI interface instance */
struct work_s irqwork; /* For deferring interrupt work to work queue */
struct work_s csma_pollwork; /* For deferring poll work to the work queue */
struct work_s gts_pollwork; /* For deferring poll work to the work queue */
sem_t exclsem; /* Exclusive access to this struct */
/* MAC Attributes */
struct ieee802154_addr_s addr;
uint8_t chan; /* 11 to 26 for the 2.4 GHz band */
uint8_t devmode; /* device mode: device, coord, pancoord */
uint8_t paenabled; /* enable usage of PA */
uint8_t rxmode; /* Reception mode: Main, no CRC, promiscuous */
int32_t txpower; /* TX power in mBm = dBm/100 */
struct ieee802154_cca_s cca; /* Clear channel assessement method */
/* MAC PIB attributes */
uint32_t max_frame_waittime;
struct ieee802154_txdesc_s *txdelayed_desc;
struct ieee802154_txdesc_s *csma_desc;
bool txdelayed_busy : 1;
bool csma_busy : 1;
bool reschedule_csma : 1;
bool rxenabled : 1;
uint8_t bsn;
struct ieee802154_txdesc_s *gts_desc[MRF24J40_GTS_SLOTS];
bool gts_busy[MRF24J40_GTS_SLOTS];
};
/****************************************************************************
* Private Function Prototypes
****************************************************************************/
/* Internal operations */
static void mrf24j40_spi_lock(FAR struct spi_dev_s *spi);
static void mrf24j40_setreg(FAR struct spi_dev_s *spi, uint32_t addr,
uint8_t val);
static uint8_t mrf24j40_getreg(FAR struct spi_dev_s *spi, uint32_t addr);
static int mrf24j40_resetrfsm(FAR struct mrf24j40_radio_s *dev);
static void mrf24j40_setorder(FAR struct mrf24j40_radio_s *dev, uint8_t bo,
uint8_t so);
static int mrf24j40_pacontrol(FAR struct mrf24j40_radio_s *dev, int mode);
static int mrf24j40_setrxmode(FAR struct mrf24j40_radio_s *dev, int mode);
static int mrf24j40_regdump(FAR struct mrf24j40_radio_s *dev);
static void mrf24j40_irqwork_rx(FAR struct mrf24j40_radio_s *dev);
static void mrf24j40_irqwork_txnorm(FAR struct mrf24j40_radio_s *dev);
static void mrf24j40_irqwork_txgts(FAR struct mrf24j40_radio_s *dev,
uint8_t gts_num);
static void mrf24j40_irqworker(FAR void *arg);
static int mrf24j40_interrupt(int irq, FAR void *context, FAR void *arg);
static void mrf24j40_dopoll_csma(FAR void *arg);
static void mrf24j40_dopoll_gts(FAR void *arg);
static void mrf24j40_norm_setup(FAR struct mrf24j40_radio_s *dev,
FAR struct iob_s *frame, bool csma);
static void mrf24j40_gts_setup(FAR struct mrf24j40_radio_s *dev, uint8_t gts,
FAR struct iob_s *frame);
static void mrf24j40_setup_fifo(FAR struct mrf24j40_radio_s *dev,
FAR const uint8_t *buf, uint8_t length, uint32_t fifo_addr);
static inline void mrf24j40_norm_trigger(FAR struct mrf24j40_radio_s *dev);
static inline void mrf24j40_beacon_trigger(FAR struct mrf24j40_radio_s *dev);
static int mrf24j40_setchannel(FAR struct mrf24j40_radio_s *dev,
uint8_t chan);
static int mrf24j40_setpanid(FAR struct mrf24j40_radio_s *dev,
FAR const uint8_t *panid);
static int mrf24j40_setsaddr(FAR struct mrf24j40_radio_s *dev,
FAR const uint8_t *saddr);
static int mrf24j40_seteaddr(FAR struct mrf24j40_radio_s *dev,
FAR const uint8_t *eaddr);
static int mrf24j40_setcoordsaddr(FAR struct mrf24j40_radio_s *dev,
FAR const uint8_t *saddr);
static int mrf24j40_setcoordeaddr(FAR struct mrf24j40_radio_s *dev,
FAR const uint8_t *eaddr);
static int mrf24j40_setdevmode(FAR struct mrf24j40_radio_s *dev,
uint8_t mode);
static int mrf24j40_settxpower(FAR struct mrf24j40_radio_s *dev,
int32_t txpwr);
static int mrf24j40_setcca(FAR struct mrf24j40_radio_s *dev,
FAR struct ieee802154_cca_s *cca);
static int mrf24j40_energydetect(FAR struct mrf24j40_radio_s *dev,
FAR uint8_t *energy);
static void mrf24j40_mactimer(FAR struct mrf24j40_radio_s *dev, int numsymbols);
/* Driver operations */
static int mrf24j40_bind(FAR struct ieee802154_radio_s *radio,
FAR struct ieee802154_radiocb_s *radiocb);
static int mrf24j40_reset(FAR struct ieee802154_radio_s *radio);
static int mrf24j40_getattr(FAR struct ieee802154_radio_s *radio,
enum ieee802154_attr_e attr,
FAR union ieee802154_attr_u *attrval);
static int mrf24j40_setattr(FAR struct ieee802154_radio_s *radio,
enum ieee802154_attr_e attr,
FAR const union ieee802154_attr_u *attrval);
static int mrf24j40_txnotify(FAR struct ieee802154_radio_s *radio, bool gts);
static int mrf24j40_txdelayed(FAR struct ieee802154_radio_s *radio,
FAR struct ieee802154_txdesc_s *txdesc,
uint32_t symboldelay);
static int mrf24j40_rxenable(FAR struct ieee802154_radio_s *dev, bool enable);
static int mrf24j40_beaconstart(FAR struct ieee802154_radio_s *radio,
FAR const struct ieee802154_superframespec_s *sfspec,
FAR struct ieee802154_beaconframe_s *beacon);
static int mrf24j40_beaconupdate(FAR struct ieee802154_radio_s *radio,
FAR struct ieee802154_beaconframe_s *beacon);
static int mrf24j40_beaconstop(FAR struct ieee802154_radio_s *radio);
static int mrf24j40_sfupdate(FAR struct ieee802154_radio_s *radio,
FAR const struct ieee802154_superframespec_s *sfspec);
/****************************************************************************
* Private Data
****************************************************************************/
static const uint8_t g_allones[8] =
{
0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF
};
/****************************************************************************
* Radio Interface Functions
****************************************************************************/
static int mrf24j40_bind(FAR struct ieee802154_radio_s *radio,
FAR struct ieee802154_radiocb_s *radiocb)
{
FAR struct mrf24j40_radio_s *dev = (FAR struct mrf24j40_radio_s *)radio;
DEBUGASSERT(dev != NULL);
dev->radiocb = radiocb;
return OK;
}
/****************************************************************************
* Function: mrf24j40_txnotify
*
* Description:
* Driver callback invoked when new TX data is available. This is a
* stimulus perform an out-of-cycle poll and, thereby, reduce the TX
* latency.
*
* Parameters:
* radio - Reference to the radio driver state structure
*
* Returned Value:
* None
*
* Assumptions:
*
****************************************************************************/
static int mrf24j40_txnotify(FAR struct ieee802154_radio_s *radio, bool gts)
{
FAR struct mrf24j40_radio_s *dev = (FAR struct mrf24j40_radio_s *)radio;
if (gts)
{
/* Is our single work structure available? It may not be if there are
* pending interrupt actions and we will have to ignore the Tx
* availability action.
*/
if (work_available(&dev->gts_pollwork))
{
/* Schedule to serialize the poll on the worker thread. */
work_queue(HPWORK, &dev->gts_pollwork, mrf24j40_dopoll_gts, dev, 0);
}
}
else
{
/* Is our single work structure available? It may not be if there are
* pending interrupt actions and we will have to ignore the Tx
* availability action.
*/
if (work_available(&dev->csma_pollwork))
{
/* Schedule to serialize the poll on the worker thread. */
work_queue(HPWORK, &dev->csma_pollwork, mrf24j40_dopoll_csma, dev, 0);
}
}
return OK;
}
/****************************************************************************
* Function: mrf24j40_txdelayed
*
* Description:
* Transmit a packet without regard to supeframe structure after a certain
* number of symbols. This function is used to send Data Request responses.
* It can also be used to send data immediately if the delay is set to 0.
*
* Parameters:
* radio - Reference to the radio driver state structure
*
* Returned Value:
* None
*
* Assumptions:
*
****************************************************************************/
static int mrf24j40_txdelayed(FAR struct ieee802154_radio_s *radio,
FAR struct ieee802154_txdesc_s *txdesc,
uint32_t symboldelay)
{
FAR struct mrf24j40_radio_s *dev = (FAR struct mrf24j40_radio_s *)radio;
uint8_t reg;
/* Get exclusive access to the radio device */
if (sem_wait(&dev->exclsem) != 0)
{
return -EINTR;
}
/* There should never be more than one of these transactions at once. */
DEBUGASSERT(!dev->txdelayed_busy);
dev->txdelayed_desc = txdesc;
dev->txdelayed_busy = true;
/* Disable the TX norm interrupt and clear it */
reg = mrf24j40_getreg(dev->spi, MRF24J40_INTCON);
reg |= MRF24J40_INTCON_TXNIE;
mrf24j40_setreg(dev->spi, MRF24J40_INTCON, reg);
/* If after disabling the interrupt, the irqworker is not scheduled, there
* are no interrupts to worry about. However, if there is work scheduled,
* we need to process it before going any further.
*/
if (!work_available(&dev->irqwork))
{
work_cancel(HPWORK, &dev->irqwork);
sem_post(&dev->exclsem);
mrf24j40_irqworker((FAR void *)dev);
/* Get exclusive access to the radio device */
if (sem_wait(&dev->exclsem) != 0)
{
return -EINTR;
}
}
if (dev->csma_busy)
{
dev->reschedule_csma = true;
}
mrf24j40_norm_setup(dev, txdesc->frame, false);
if (symboldelay == 0)
{
mrf24j40_norm_trigger(dev);
}
else
{
mrf24j40_mactimer(dev, symboldelay);
}
sem_post(&dev->exclsem);
return OK;
}
static int mrf24j40_reset(FAR struct ieee802154_radio_s *radio)
{
FAR struct mrf24j40_radio_s *dev = (FAR struct mrf24j40_radio_s *)radio;
struct ieee802154_cca_s cca;
int reg;
/* Software reset */
mrf24j40_setreg(dev->spi, MRF24J40_SOFTRST , 0x07); /* 00000111 Reset */
while(mrf24j40_getreg(dev->spi, MRF24J40_SOFTRST) & 0x07);
/* Apply recommended settings */
mrf24j40_setreg(dev->spi, MRF24J40_PACON2 , 0x98); /* 10011000 Enable FIFO (default), TXONTS=6 (recommended), TXONT<8:7>=0 */
mrf24j40_setreg(dev->spi, MRF24J40_TXSTBL , 0x95); /* 10010101 set the SIFS period. RFSTBL=9, MSIFS=5, aMinSIFSPeriod=14 (min 12) */
mrf24j40_setreg(dev->spi, MRF24J40_TXPEND , 0x7C); /* 01111100 set the LIFS period, MLIFS=1Fh=31 aMinLIFSPeriod=40 (min 40) */
mrf24j40_setreg(dev->spi, MRF24J40_TXTIME , 0x30); /* 00110000 set the turnaround time, TURNTIME=3 aTurnAroundTime=12 */
mrf24j40_setreg(dev->spi, MRF24J40_RFCON1 , 0x02); /* 00000010 VCO optimization, recommended value */
mrf24j40_setreg(dev->spi, MRF24J40_RFCON2 , 0x80); /* 10000000 Enable PLL */
mrf24j40_setreg(dev->spi, MRF24J40_RFCON6 , 0x90); /* 10010000 TX filter enable, fast 20M recovery, No bat monitor*/
mrf24j40_setreg(dev->spi, MRF24J40_RFCON7 , 0x80); /* 10000000 Sleep clock on internal 100 kHz */
mrf24j40_setreg(dev->spi, MRF24J40_RFCON8 , 0x10); /* 00010000 VCO control bit, as recommended */
mrf24j40_setreg(dev->spi, MRF24J40_SLPCON1, 0x01); /* 00000001 no CLKOUT, default divisor */
mrf24j40_setreg(dev->spi, MRF24J40_BBREG6 , 0x40); /* 01000000 Append RSSI to rx packets */
/* Set this in reset since it can exist for all device modes. See pg 101 */
mrf24j40_setreg(dev->spi, MRF24J40_FRMOFFSET, 0x15);
Fix dangling white space at the end of lines.
2017-07-03 18:08:49 +02:00
drivers/wireless/ieee802154: Moved radios to individual sub-directories
2017-07-03 06:33:17 +02:00
/* For now, we want to always just have the frame pending bit set when
* acknowledging a Data Request command. The standard says that the coordinator
* can do this if it needs time to figure out whether it has data or not
*/
mrf24j40_setreg(dev->spi, MRF24J40_ACKTMOUT, 0x39 | MRF24J40_ACKTMOUT_DRPACK);
/* Set WAKECNT (SLPACK 0x35<6:0>) value = 0x5F to set the main oscillator
* (20 MHz) start-up timer value.
*/
mrf24j40_setreg(dev->spi, MRF24J40_SLPACK, 0x5F);
/* Enable the SLPIF and WAKEIF flags */
reg = mrf24j40_getreg(dev->spi, MRF24J40_INTCON);
reg &= ~(MRF24J40_INTCON_SLPIE | MRF24J40_INTCON_WAKEIE);
mrf24j40_setreg(dev->spi, MRF24J40_INTCON, reg);
dev->rxenabled = false;
mrf24j40_setchannel(dev, 11);
mrf24j40_setpanid(dev, g_allones);
mrf24j40_setsaddr(dev, g_allones);
mrf24j40_seteaddr(dev, g_allones);
dev->max_frame_waittime = MRF24J40_DEFAULT_MAX_FRAME_WAITTIME;
dev->bsn = 0;
/* Default device params */
cca.use_ed = 1;
cca.use_cs = 0;
cca.edth = 0x60; /* CCA mode ED, no carrier sense, recommenced ED threshold -69 dBm */
mrf24j40_setcca(dev, &cca);
mrf24j40_setrxmode(dev, MRF24J40_RXMODE_NORMAL);
mrf24j40_settxpower(dev, 0); /*16. Set transmitter power .*/
mrf24j40_pacontrol(dev, MRF24J40_PA_AUTO);
return OK;
}
static int mrf24j40_getattr(FAR struct ieee802154_radio_s *radio,
enum ieee802154_attr_e attr,
FAR union ieee802154_attr_u *attrval)
{
FAR struct mrf24j40_radio_s *dev = (FAR struct mrf24j40_radio_s *)radio;
int ret;
switch (attr)
{
case IEEE802154_ATTR_MAC_EADDR:
{
memcpy(&attrval->mac.eaddr[0], &dev->addr.eaddr[0], 8);
ret = IEEE802154_STATUS_SUCCESS;
}
break;
case IEEE802154_ATTR_MAC_MAX_FRAME_WAITTIME:
{
attrval->mac.max_frame_waittime = dev->max_frame_waittime;
ret = IEEE802154_STATUS_SUCCESS;
}
break;
case IEEE802154_ATTR_PHY_SYMBOL_DURATION:
{
attrval->phy.symdur_picosec = MRF24J40_SYMBOL_DURATION_PS;
ret = IEEE802154_STATUS_SUCCESS;
}
break;
case IEEE802154_ATTR_PHY_CHAN:
{
attrval->phy.chan = dev->chan;
ret = IEEE802154_STATUS_SUCCESS;
}
default:
ret = IEEE802154_STATUS_UNSUPPORTED_ATTRIBUTE;
}
return ret;
}
static int mrf24j40_setattr(FAR struct ieee802154_radio_s *radio,
enum ieee802154_attr_e attr,
FAR const union ieee802154_attr_u *attrval)
{
FAR struct mrf24j40_radio_s *dev = (FAR struct mrf24j40_radio_s *)radio;
int ret;
switch (attr)
{
case IEEE802154_ATTR_MAC_PANID:
{
mrf24j40_setpanid(dev, attrval->mac.panid);
ret = IEEE802154_STATUS_SUCCESS;
}
break;
case IEEE802154_ATTR_MAC_SADDR:
{
mrf24j40_setsaddr(dev, attrval->mac.saddr);
ret = IEEE802154_STATUS_SUCCESS;
}
break;
case IEEE802154_ATTR_MAC_EADDR:
{
mrf24j40_seteaddr(dev, attrval->mac.eaddr);
ret = IEEE802154_STATUS_SUCCESS;
}
break;
case IEEE802154_ATTR_MAC_COORD_SADDR:
{
mrf24j40_setcoordsaddr(dev, attrval->mac.coordsaddr);
ret = IEEE802154_STATUS_SUCCESS;
}
break;
case IEEE802154_ATTR_MAC_COORD_EADDR:
{
mrf24j40_setcoordeaddr(dev, attrval->mac.coordeaddr);
ret = IEEE802154_STATUS_SUCCESS;
}
break;
case IEEE802154_ATTR_MAC_PROMISCUOUS_MODE:
{
if (attrval->mac.promisc_mode)
{
mrf24j40_setrxmode(dev, MRF24J40_RXMODE_PROMISC);
}
else
{
mrf24j40_setrxmode(dev, MRF24J40_RXMODE_NORMAL);
}
ret = IEEE802154_STATUS_SUCCESS;
}
break;
Fix dangling white space at the end of lines.
2017-07-03 18:08:49 +02:00
drivers/wireless/ieee802154: Moved radios to individual sub-directories
2017-07-03 06:33:17 +02:00
case IEEE802154_ATTR_PHY_CHAN:
{
mrf24j40_setchannel(dev, attrval->phy.chan);
ret = IEEE802154_STATUS_SUCCESS;
}
break;
default:
ret = IEEE802154_STATUS_UNSUPPORTED_ATTRIBUTE;
break;
}
return ret;
}
static int mrf24j40_beaconstart(FAR struct ieee802154_radio_s *radio,
FAR const struct ieee802154_superframespec_s *sfspec,
FAR struct ieee802154_beaconframe_s *beacon)
{
FAR struct mrf24j40_radio_s *dev = (FAR struct mrf24j40_radio_s *)radio;
int reg;
if (sfspec->pancoord)
{
/* Set the PANCOORD (RXMCR 0x00<3>) bit = 1to configure as PAN coordinator */
reg = mrf24j40_getreg(dev->spi, MRF24J40_RXMCR);
reg |= MRF24J40_RXMCR_PANCOORD;
mrf24j40_setreg(dev->spi, MRF24J40_RXMCR, reg);
/* Set the SLOTTED (TXMCR 0x11<5>) bit = 1 to use Slotted CSMA-CA mode */
reg = mrf24j40_getreg(dev->spi, MRF24J40_TXMCR);
reg |= MRF24J40_TXMCR_SLOTTED;
mrf24j40_setreg(dev->spi, MRF24J40_TXMCR, reg);
/* Load the beacon frame into the TXBFIFO (0x080-0x0FF). */
mrf24j40_setup_fifo(dev, beacon->bf_data, beacon->bf_len, MRF24J40_BEACON_FIFO);
/* The radio layer is responsible for setting the BSN. */
dev->bsn = 0;
mrf24j40_setreg(dev->spi, MRF24J40_BEACON_FIFO + 4, dev->bsn++);
/* Set the TXBMSK (TXBCON1 0x25<7>) bit = 1 to mask the beacon interrupt
* mask
*/
reg = mrf24j40_getreg(dev->spi, MRF24J40_TXBCON1);
reg |= MRF24J40_TXBCON1_TXBMSK;
mrf24j40_setreg(dev->spi, MRF24J40_TXBCON1, reg);
/* Set INTL (WAKECON 0x22<5:0>) value to 0x03. */
reg = mrf24j40_getreg(dev->spi, MRF24J40_WAKECON);
reg &= ~MRF24J40_WAKECON_INTL;
reg |= 0x03 & MRF24J40_WAKECON_INTL;
mrf24j40_setreg(dev->spi, MRF24J40_WAKECON, reg);
/* Program the CAP end slot (ESLOTG1 0x13<3:0>) value. */
reg = mrf24j40_getreg(dev->spi, MRF24J40_ESLOTG1);
reg &= ~MRF24J40_ESLOTG1_CAP;
reg |= sfspec->final_capslot & MRF24J40_ESLOTG1_CAP;
mrf24j40_setreg(dev->spi, MRF24J40_ESLOTG1, reg);
/* TODO: Add GTS related code. See pg 100 of datasheet */
mrf24j40_setorder(dev, sfspec->beaconorder, sfspec->sforder);
}
else
{
return -ENOTTY;
}
return OK;
}
static int mrf24j40_beaconupdate(FAR struct ieee802154_radio_s *radio,
FAR struct ieee802154_beaconframe_s *beacon)
{
FAR struct mrf24j40_radio_s *dev = (FAR struct mrf24j40_radio_s *)radio;
mrf24j40_setup_fifo(dev, beacon->bf_data, beacon->bf_len, MRF24J40_BEACON_FIFO);
mrf24j40_beacon_trigger(dev);
return OK;
}
static int mrf24j40_beaconstop(FAR struct ieee802154_radio_s *radio)
{
return -ENOTTY;
}
static int mrf24j40_sfupdate(FAR struct ieee802154_radio_s *radio,
FAR const struct ieee802154_superframespec_s *sfspec)
{
FAR struct mrf24j40_radio_s *dev = (FAR struct mrf24j40_radio_s *)radio;
int reg;
/* If we are operating on a beacon-enabled network, use slotted CSMA */
reg = mrf24j40_getreg(dev->spi, MRF24J40_TXMCR);
if (sfspec->beaconorder < 15)
{
reg |= MRF24J40_TXMCR_SLOTTED;
}
else
{
reg &= ~MRF24J40_TXMCR_SLOTTED;
}
mrf24j40_setreg(dev->spi, MRF24J40_TXMCR, reg);
mrf24j40_setorder(dev, sfspec->beaconorder, sfspec->sforder);
Fix dangling white space at the end of lines.
2017-07-03 18:08:49 +02:00
/* Program the CAP end slot (ESLOTG1 0x13<3:0>) value. */
drivers/wireless/ieee802154: Moved radios to individual sub-directories
2017-07-03 06:33:17 +02:00
reg = mrf24j40_getreg(dev->spi, MRF24J40_ESLOTG1);
reg &= ~MRF24J40_ESLOTG1_CAP;
reg |= sfspec->final_capslot & MRF24J40_ESLOTG1_CAP;
mrf24j40_setreg(dev->spi, MRF24J40_ESLOTG1, reg);
return OK;
}
/****************************************************************************
* Internal Functions
****************************************************************************/
static void mrf24j40_mactimer(FAR struct mrf24j40_radio_s *dev, int numsymbols)
{
uint16_t nhalfsym;
uint8_t reg;
nhalfsym = (numsymbols << 1);
/* Disable the interrupt, clear the timer count */
reg = mrf24j40_getreg(dev->spi, MRF24J40_INTCON);
reg |= MRF24J40_INTCON_HSYMTMRIE;
mrf24j40_setreg(dev->spi, MRF24J40_INTCON, reg);
mrf24j40_setreg(dev->spi, MRF24J40_HSYMTMRL, 0x00);
mrf24j40_setreg(dev->spi, MRF24J40_HSYMTMRH, 0x00);
reg &= ~MRF24J40_INTCON_HSYMTMRIE;
mrf24j40_setreg(dev->spi, MRF24J40_INTCON, reg);
/* Set the timer count and enable interrupts */
reg = (nhalfsym & 0xFF);
mrf24j40_setreg(dev->spi, MRF24J40_HSYMTMRL, reg);
reg = (nhalfsym >> 8) & 0xFF;
mrf24j40_setreg(dev->spi, MRF24J40_HSYMTMRH, reg);
}
/****************************************************************************
* Function: mrf24j40_dopoll_csma
*
* Description:
* This function is called in order to preform an out-of-sequence TX poll.
* This is done:
*
* 1. After completion of a transmission (mrf24j40_txdone_csma),
* 2. When new TX data is available (mrf24j40_txnotify), and
* 3. After a TX timeout to restart the sending process
* (mrf24j40_txtimeout_csma).
*
* Parameters:
* radio - Reference to the radio driver state structure
*
* Returned Value:
* None
*
* Assumptions:
*
****************************************************************************/
static void mrf24j40_dopoll_csma(FAR void *arg)
{
FAR struct mrf24j40_radio_s *dev = (FAR struct mrf24j40_radio_s *)arg;
int len = 0;
/* Get exclusive access to the driver */
while (sem_wait(&dev->exclsem) != 0) { }
/* If this a CSMA transaction and we have room in the CSMA fifo */
if (!dev->csma_busy)
{
wlinfo("Polling for frame\n");
len = dev->radiocb->poll(dev->radiocb, false, &dev->csma_desc);
if (len > 0)
{
wlinfo("Frame received. Frame length: %d\n", len);
/* Now the txdesc is in use */
dev->csma_busy = 1;
/* Setup the transaction on the device in the CSMA FIFO */
mrf24j40_norm_setup(dev, dev->csma_desc->frame, true);
mrf24j40_norm_trigger(dev);
}
}
sem_post(&dev->exclsem);
}
/****************************************************************************
* Function: mrf24j40_dopoll_gts
*
* Description:
* This function is called in order to preform an out-of-sequence TX poll.
* This is done:
*
* 1. After completion of a transmission (mrf24j40_txdone_gts),
* 2. When new TX data is available (mrf24j40_txnotify), and
* 3. After a TX timeout to restart the sending process
* (mrf24j40_txtimeout_gts).
*
* Parameters:
* arg - Reference to the radio driver state structure
*
* Returned Value:
* None
*
* Assumptions:
*
****************************************************************************/
static void mrf24j40_dopoll_gts(FAR void *arg)
{
FAR struct mrf24j40_radio_s *dev = (FAR struct mrf24j40_radio_s *)arg;
int gts = 0;
int len = 0;
/* Get exclusive access to the driver */
while (sem_wait(&dev->exclsem) != 0) { }
for (gts = 0; gts < MRF24J40_GTS_SLOTS; gts++)
{
if (!dev->gts_busy[gts])
{
len = dev->radiocb->poll(dev->radiocb, true, &dev->gts_desc[gts]);
if (len > 0)
{
/* Now the txdesc is in use */
dev->gts_busy[gts]= 1;
/* Setup the transaction on the device in the open GTS FIFO */
mrf24j40_gts_setup(dev, gts, dev->gts_desc[gts]->frame);
}
}
}
sem_post(&dev->exclsem);
}
/****************************************************************************
* Name: mrf24j40_spi_lock
*
* Description:
* Acquire exclusive access to the shared SPI bus.
*
****************************************************************************/
static void mrf24j40_spi_lock(FAR struct spi_dev_s *spi)
{
SPI_LOCK(spi, 1);
SPI_SETBITS(spi, 8);
SPI_SETMODE(spi, CONFIG_IEEE802154_MRF24J40_SPIMODE);
SPI_SETFREQUENCY(spi, CONFIG_IEEE802154_MRF24J40_FREQUENCY);
}
/****************************************************************************
* Name: mrf24j40_spi_unlock
*
* Description:
* Release exclusive access to the shared SPI bus.
*
****************************************************************************/
static inline void mrf24j40_spi_unlock(FAR struct spi_dev_s *spi)
{
SPI_LOCK(spi,0);
}
/****************************************************************************
* Name: mrf24j40_setreg
*
* Description:
* Define the value of an MRF24J40 device register
*
****************************************************************************/
static void mrf24j40_setreg(FAR struct spi_dev_s *spi, uint32_t addr,
uint8_t val)
{
uint8_t buf[3];
int len;
if (!(addr&0x80000000))
{
addr &= 0x3F; /* 6-bit address */
addr <<= 1;
addr |= 0x01; /* writing */
buf[0] = addr;
len = 1;
}
else
{
addr &= 0x3FF; /* 10-bit address */
addr <<= 5;
addr |= 0x8010; /* writing long */
buf[0] = (addr >> 8);
buf[1] = (addr & 0xFF);
len = 2;
}
buf[len++] = val;
mrf24j40_spi_lock(spi);
SPI_SELECT(spi, SPIDEV_IEEE802154(0), true);
SPI_SNDBLOCK(spi, buf, len);
SPI_SELECT(spi, SPIDEV_IEEE802154(0), false);
mrf24j40_spi_unlock(spi);
}
/****************************************************************************
* Name: mrf24j40_getreg
*
* Description:
* Return the value of an MRF24J40 device register*
*
****************************************************************************/
static uint8_t mrf24j40_getreg(FAR struct spi_dev_s *spi, uint32_t addr)
{
uint8_t buf[3];
uint8_t rx[3];
int len;
if (!(addr&0x80000000))
{
/* 6-bit address */
addr &= 0x3F;
addr <<= 1;
buf[0] = addr;
len = 1;
}
else
{
/* 10-bit address */
addr &= 0x3FF;
addr <<= 5;
addr |= 0x8000;
buf[0] = (addr >> 8);
buf[1] = (addr & 0xFF);
len = 2;
}
buf[len++] = 0xFF; /* dummy */
mrf24j40_spi_lock (spi);
SPI_SELECT (spi, SPIDEV_IEEE802154(0), true);
SPI_EXCHANGE (spi, buf, rx, len);
SPI_SELECT (spi, SPIDEV_IEEE802154(0), false);
mrf24j40_spi_unlock(spi);
/* wlinfo("r[%04X]=%02X\n", addr, rx[len - 1]); */
return rx[len - 1];
}
/****************************************************************************
* Name: mrf24j40_resetrfsm
*
* Description:
* Reset the RF state machine. Required at boot, after channel change,
* and probably after PA settings.
*
****************************************************************************/
static int mrf24j40_resetrfsm(FAR struct mrf24j40_radio_s *dev)
{
uint8_t reg;
reg = mrf24j40_getreg(dev->spi, MRF24J40_RFCTL);
reg |= 0x04;
mrf24j40_setreg(dev->spi, MRF24J40_RFCTL, reg);
reg &= ~0x04;
mrf24j40_setreg(dev->spi, MRF24J40_RFCTL, reg);
up_udelay(200);
return OK;
}
/****************************************************************************
* Name: mrf24j40_setorder
*
* Description:
* Configures the timers and sets the ORDER register
****************************************************************************/
static void mrf24j40_setorder(FAR struct mrf24j40_radio_s *dev, uint8_t bo,
uint8_t so)
{
uint32_t maincnt = 0;
uint32_t slpcal = 0;
/* Calibrate the Sleep Clock (SLPCLK) frequency. Refer to Section 3.15.1.2
* “Sleep Clock Calibration”.
*/
/* If the Sleep Clock Selection, SLPCLKSEL (0x207<7:6), is the internal
* oscillator (100 kHz), set SLPCLKDIV to a minimum value of 0x01.
*/
Fix dangling white space at the end of lines.
2017-07-03 18:08:49 +02:00
drivers/wireless/ieee802154: Moved radios to individual sub-directories
2017-07-03 06:33:17 +02:00
mrf24j40_setreg(dev->spi, MRF24J40_SLPCON1, 0x01);
/* Select the source of SLPCLK (internal 100kHz) */
mrf24j40_setreg(dev->spi, MRF24J40_RFCON7, MRF24J40_RFCON7_SEL_100KHZ);
/* Begin calibration by setting the SLPCALEN bit (SLPCAL2 0x20B<4>) to
* ‘1’. Sixteen samples of the SLPCLK are counted and stored in the
* SLPCAL register. No need to mask, this is the only writable bit
*/
mrf24j40_setreg(dev->spi, MRF24J40_SLPCAL2, MRF24J40_SLPCAL2_SLPCALEN);
/* Calibration is complete when the SLPCALRDY bit (SLPCAL2 0x20B<7>) is
* set to ‘1’.
*/
Fix dangling white space at the end of lines.
2017-07-03 18:08:49 +02:00
while (!(mrf24j40_getreg(dev->spi, MRF24J40_SLPCAL2) &
drivers/wireless/ieee802154: Moved radios to individual sub-directories
2017-07-03 06:33:17 +02:00
MRF24J40_SLPCAL2_SLPCALRDY))
{
usleep(1);
}
slpcal = mrf24j40_getreg(dev->spi, MRF24J40_SLPCAL0);
slpcal |= (mrf24j40_getreg(dev->spi, MRF24J40_SLPCAL1) << 8);
slpcal |= ((mrf24j40_getreg(dev->spi, MRF24J40_SLPCAL2) << 16) & 0x0F);
/* Program the Beacon Interval into the Main Counter, MAINCNT (0x229<1:0>,
* 0x228, 0x227, 0x226), and Remain Counter, REMCNT (0x225, 0x224),
* according to BO and SO values. Refer to Section 3.15.1.3 “Sleep Mode
Fix dangling white space at the end of lines.
2017-07-03 18:08:49 +02:00
* Counters”
drivers/wireless/ieee802154: Moved radios to individual sub-directories
2017-07-03 06:33:17 +02:00
*/
mrf24j40_setreg(dev->spi, MRF24J40_REMCNTL, (MRF24J40_REMCNT & 0xFF));
mrf24j40_setreg(dev->spi, MRF24J40_REMCNTH, ((MRF24J40_REMCNT >> 8) & 0xFF));
maincnt = MRF24J40_MAINCNT(bo, (slpcal * 50 / 16));
mrf24j40_setreg(dev->spi, MRF24J40_MAINCNT0, (maincnt & 0xFF));
mrf24j40_setreg(dev->spi, MRF24J40_MAINCNT1, ((maincnt >> 8) & 0xFF));
mrf24j40_setreg(dev->spi, MRF24J40_MAINCNT2, ((maincnt >> 16) & 0xFF));
mrf24j40_setreg(dev->spi, MRF24J40_MAINCNT3, ((maincnt >> 24) & 0x03));
/* Configure the BO (ORDER 0x10<7:4>) and SO (ORDER 0x10<3:0>) values.
* After configuring BO and SO, the beacon frame will be sent immediately.
*/
mrf24j40_setreg(dev->spi, MRF24J40_ORDER, ((bo << 4) & 0xF0) | (so & 0x0F));
}
/****************************************************************************
* Name: mrf24j40_pacontrol
*
* Description:
* Control the external LNA/PA on the MRF24J40MB/MC/MD/ME modules
* GPIO 1: PA enable
* GPIO 2: LNA enable
* GPIO 3: PA power enable (not required on MB)
****************************************************************************/
static int mrf24j40_pacontrol(FAR struct mrf24j40_radio_s *dev, int mode)
{
if (!dev->paenabled)
{
return OK;
}
if (mode == MRF24J40_PA_AUTO)
{
mrf24j40_setreg(dev->spi, MRF24J40_TRISGPIO, 0x08);
mrf24j40_setreg(dev->spi, MRF24J40_GPIO , 0x08);
mrf24j40_setreg(dev->spi, MRF24J40_TESTMODE, 0x0F);
}
else if (mode == MRF24J40_PA_ED)
{
mrf24j40_setreg(dev->spi, MRF24J40_TESTMODE, 0x08);
mrf24j40_setreg(dev->spi, MRF24J40_TRISGPIO, 0x0F);
mrf24j40_setreg(dev->spi, MRF24J40_GPIO , 0x0C);
}
else if (mode == MRF24J40_PA_SLEEP)
{
mrf24j40_setreg(dev->spi, MRF24J40_TESTMODE, 0x08);
mrf24j40_setreg(dev->spi, MRF24J40_TRISGPIO, 0x0F);
mrf24j40_setreg(dev->spi, MRF24J40_GPIO , 0x00);
}
else
{
return -EINVAL;
}
mrf24j40_resetrfsm(dev);
return OK;
}
/****************************************************************************
* Name: mrf24j40_setrxmode
*
* Description:
* Set the RX mode (normal, promiscuous, no CRC)
*
****************************************************************************/
static int mrf24j40_setrxmode(FAR struct mrf24j40_radio_s *dev, int mode)
{
uint8_t reg;
if (mode < MRF24J40_RXMODE_NORMAL || mode > MRF24J40_RXMODE_NOCRC)
{
return -EINVAL;
}
reg = mrf24j40_getreg(dev->spi, MRF24J40_RXMCR);
reg &= ~0x03;
reg |= mode;
/* Set mode options */
if (mode != MRF24J40_RXMODE_NORMAL)
{
/* Promisc and error modes: Disable auto ACK */
reg |= MRF24J40_RXMCR_NOACKRSP;
}
else
{
/* Normal mode : enable auto-ACK */
reg &= ~MRF24J40_RXMCR_NOACKRSP;
}
mrf24j40_setreg(dev->spi, MRF24J40_RXMCR, reg);
dev->rxmode = mode;
wlinfo("%u\n", (unsigned)mode);
return OK;
}
/****************************************************************************
* Name: mrf24j40_setchannel
*
* Description:
* Define the current radio channel the device is operating on.
* In the 2.4 GHz, there are 16 channels, each 2 MHz wide, 5 MHz spacing:
* Chan MHz Chan MHz Chan MHz Chan MHz
* 11 2405 15 2425 19 2445 23 2465
* 12 2410 16 2430 20 2450 24 2470
* 13 2415 17 2435 21 2455 25 2475
* 14 2420 18 2440 22 2460 26 2480
*
****************************************************************************/
static int mrf24j40_setchannel(FAR struct mrf24j40_radio_s *dev, uint8_t chan)
{
if (chan < 11 || chan > 26)
{
wlerr("ERROR: Invalid chan: %d\n",chan);
return -EINVAL;
}
/* 15. Set channel – See Section 3.4 “Channel Selection”. */
mrf24j40_setreg(dev->spi, MRF24J40_RFCON0, (chan - 11) << 4 | 0x03);
/* 17. RFCTL (0x36) = 0x04 – Reset RF state machine.
* 18. RFCTL (0x36) = 0x00.
*/
mrf24j40_resetrfsm(dev);
dev->chan = chan;
wlinfo("%u\n", (unsigned)chan);
return OK;
}
/****************************************************************************
* Name: mrf24j40_setpanid
*
* Description:
* Define the PAN ID the device is operating on.
*
****************************************************************************/
static int mrf24j40_setpanid(FAR struct mrf24j40_radio_s *dev,
FAR const uint8_t *panid)
{
mrf24j40_setreg(dev->spi, MRF24J40_PANIDL, panid[0]);
mrf24j40_setreg(dev->spi, MRF24J40_PANIDH, panid[1]);
IEEE802154_PANIDCOPY(dev->addr.panid, panid);
wlinfo("%02X:%02X\n", panid[0], panid[1]);
return OK;
}
/****************************************************************************
* Name: mrf24j40_setsaddr
*
* Description:
* Define the device short address. The following addresses are special:
* FFFEh : Broadcast
* FFFFh : Unspecified
*
****************************************************************************/
static int mrf24j40_setsaddr(FAR struct mrf24j40_radio_s *dev,
FAR const uint8_t *saddr)
{
mrf24j40_setreg(dev->spi, MRF24J40_SADRL, saddr[0]);
mrf24j40_setreg(dev->spi, MRF24J40_SADRH, saddr[1]);
IEEE802154_SADDRCOPY(dev->addr.saddr, saddr);
wlinfo("%02X:%02X\n", saddr[0], saddr[1]);
return OK;
}
/****************************************************************************
* Name: mrf24j40_seteaddr
*
* Description:
* Define the device extended address. The following addresses are special:
* FFFFFFFFFFFFFFFFh : Unspecified
*
****************************************************************************/
static int mrf24j40_seteaddr(FAR struct mrf24j40_radio_s *dev,
FAR const uint8_t *eaddr)
{
int i;
for (i = 0; i < 8; i++)
{
mrf24j40_setreg(dev->spi, MRF24J40_EADR0 + i, eaddr[i]);
dev->addr.eaddr[i] = eaddr[i];
}
wlinfo("%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n", eaddr[0], eaddr[1],
eaddr[2], eaddr[3], eaddr[4], eaddr[5], eaddr[6], eaddr[7]);
return OK;
}
/****************************************************************************
* Name: mrf24j40_setcoordsaddr
*
* Description:
* Define the coordinator short address. The following addresses are special:
* FFFEh : Broadcast
* FFFFh : Unspecified
*
****************************************************************************/
static int mrf24j40_setcoordsaddr(FAR struct mrf24j40_radio_s *dev,
FAR const uint8_t *saddr)
{
mrf24j40_setreg(dev->spi, MRF24J40_ASSOSADR0, saddr[0]);
mrf24j40_setreg(dev->spi, MRF24J40_ASSOSADR1, saddr[1]);
IEEE802154_SADDRCOPY(dev->addr.saddr, saddr);
wlinfo("%02X:%02X\n", saddr[0], saddr[1]);
return OK;
}
/****************************************************************************
* Name: mrf24j40_setcoordeaddr
*
* Description:
* Define the coordinator extended address. The following addresses are special:
* FFFFFFFFFFFFFFFFh : Unspecified
*
****************************************************************************/
static int mrf24j40_setcoordeaddr(FAR struct mrf24j40_radio_s *dev,
FAR const uint8_t *eaddr)
{
int i;
for (i = 0; i < 8; i++)
{
mrf24j40_setreg(dev->spi, MRF24J40_ASSOEADR0 + i, eaddr[i]);
dev->addr.eaddr[i] = eaddr[i];
}
wlinfo("%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n", eaddr[0], eaddr[1],
eaddr[2], eaddr[3], eaddr[4], eaddr[5], eaddr[6], eaddr[7]);
return OK;
}
/****************************************************************************
* Name: mrf24j40_setdevmode
*
* Description:
* Define the device behaviour: normal end device or coordinator
*
****************************************************************************/
static int mrf24j40_setdevmode(FAR struct mrf24j40_radio_s *dev,
uint8_t mode)
{
int ret = OK;
uint8_t reg;
/* Disable slotted mode until I decide to implement slotted mode */
reg = mrf24j40_getreg(dev->spi, MRF24J40_TXMCR);
reg &= ~MRF24J40_TXMCR_SLOTTED;
mrf24j40_setreg(dev->spi, MRF24J40_TXMCR, reg);
mrf24j40_setreg(dev->spi, MRF24J40_ORDER, 0xFF);
/* Define dev mode */
reg = mrf24j40_getreg(dev->spi, MRF24J40_RXMCR);
if (mode == MRF24J40_MODE_PANCOORD)
{
reg |= MRF24J40_RXMCR_PANCOORD;
reg &= ~MRF24J40_RXMCR_COORD;
}
else if (mode == MRF24J40_MODE_COORD)
{
reg |= MRF24J40_RXMCR_COORD;
reg &= ~MRF24J40_RXMCR_PANCOORD;
}
else if (mode == MRF24J40_MODE_DEVICE)
{
reg &= ~MRF24J40_RXMCR_PANCOORD;
reg &= ~MRF24J40_RXMCR_COORD;
}
else
{
return -EINVAL;
}
mrf24j40_setreg(dev->spi, MRF24J40_RXMCR, reg);
dev->devmode = mode;
return ret;
}
/****************************************************************************
* Name: mrf24j40_settxpower
*
* Description:
* Define the transmit power. Value is passed in mBm, it is rounded to
* the nearest value. Some MRF modules have a power amplifier, this routine
* does not care about this. We only change the CHIP output power.
*
****************************************************************************/
static int mrf24j40_settxpower(FAR struct mrf24j40_radio_s *dev,
int32_t txpwr)
{
uint8_t reg;
int save_txpwr = txpwr;
if (txpwr <= -3000 && txpwr > -3630)
{
reg = 0xC0;
txpwr += 3000;
}
else if (txpwr <= -2000)
{
reg = 0x80;
txpwr += 2000;
}
else if (txpwr <= -1000)
{
reg = 0x40;
txpwr += 1000;
}
else if (txpwr <= 0)
{
reg = 0x00;
}
else
{
return -EINVAL;
}
wlinfo("Remaining attenuation: %d mBm\n",txpwr);
switch(txpwr/100)
{
case -9:
case -8:
case -7:
case -6:
reg |= 0x07;
break;
case -5:
reg |= 0x06;
break;
case -4:
reg |= 0x05;
break;
case -3:
reg |= 0x04;
break;
case -2:
reg |= 0x03;
break;
case -1:
reg |= 0x02;
break;
case 0:
reg |= 0x00; /* value 0x01 is 0.5 db, not used */
break;
default:
return -EINVAL;
}
mrf24j40_setreg(dev->spi, MRF24J40_RFCON3, reg);
dev->txpower = save_txpwr;
return OK;
}
/****************************************************************************
* Name: mrf24j40_setcca
*
* Description:
* Define the Clear Channel Assessement method.
*
****************************************************************************/
static int mrf24j40_setcca(FAR struct mrf24j40_radio_s *dev,
FAR struct ieee802154_cca_s *cca)
{
uint8_t mode;
if (!cca->use_ed && !cca->use_cs)
{
return -EINVAL;
}
if (cca->use_cs && cca->csth > 0x0f)
{
return -EINVAL;
}
mode = mrf24j40_getreg(dev->spi, MRF24J40_BBREG2);
mode &= 0x03;
if (cca->use_ed)
{
mode |= MRF24J40_BBREG2_CCAMODE_ED;
mrf24j40_setreg(dev->spi, MRF24J40_CCAEDTH, cca->edth);
}
if (cca->use_cs)
{
mode |= MRF24J40_BBREG2_CCAMODE_CS;
mode |= cca->csth << 2;
}
mrf24j40_setreg(dev->spi, MRF24J40_BBREG2, mode);
memcpy(&dev->cca, cca, sizeof(struct ieee802154_cca_s));
return OK;
}
/****************************************************************************
* Name: mrf24j40_regdump
*
* Description:
* Display the value of all registers.
*
****************************************************************************/
static int mrf24j40_regdump(FAR struct mrf24j40_radio_s *dev)
{
uint32_t i;
char buf[4+16*3+2+1];
int len = 0;
wlinfo("Short regs:\n");
for (i = 0; i < 0x40; i++)
{
if ((i & 15) == 0)
{
len=sprintf(buf, "%02x: ",i&0xFF);
}
len += sprintf(buf+len, "%02x ", mrf24j40_getreg(dev->spi, i));
if ((i & 15) == 15)
{
sprintf(buf+len, "\n");
wlinfo("%s", buf);
}
}
wlinfo("Long regs:\n");
for (i = 0x80000200; i < 0x80000250; i++)
{
if ((i & 15) == 0)
{
len=sprintf(buf, "%02x: ",i&0xFF);
}
len += sprintf(buf+len, "%02x ", mrf24j40_getreg(dev->spi, i));
if ((i & 15) == 15)
{
sprintf(buf+len, "\n");
wlinfo("%s", buf);
}
}
return 0;
}
/****************************************************************************
* Name: mrf24j40_energydetect
*
* Description:
* Measure the RSSI level for the current channel.
*
****************************************************************************/
static int mrf24j40_energydetect(FAR struct mrf24j40_radio_s *dev,
FAR uint8_t *energy)
{
uint8_t reg;
/* Manually enable the LNA*/
mrf24j40_pacontrol(dev, MRF24J40_PA_ED);
/* Set RSSI average duration to 8 symbols */
reg = mrf24j40_getreg(dev->spi, MRF24J40_TXBCON1);
reg |= 0x30;
mrf24j40_setreg(dev->spi, MRF24J40_TXBCON1, reg);
/* 1. Set RSSIMODE1 0x3E<7> – Initiate RSSI calculation. */
mrf24j40_setreg(dev->spi, MRF24J40_BBREG6, 0x80);
/* 2. Wait until RSSIRDY 0x3E<0> is set to ‘1’ – RSSI calculation is
* complete.
*/
while(!(mrf24j40_getreg(dev->spi, MRF24J40_BBREG6) & 0x01));
/* 3. Read RSSI 0x210<7:0> – The RSSI register contains the averaged RSSI
* received power level for 8 symbol periods.
*/
*energy = mrf24j40_getreg(dev->spi, MRF24J40_RSSI);
mrf24j40_setreg(dev->spi, MRF24J40_BBREG6, 0x40);
/* Back to automatic control */
mrf24j40_pacontrol(dev, MRF24J40_PA_AUTO);
return OK;
}
/****************************************************************************
* Name: mrf24j40_norm_setup
*
* Description:
* Setup a transaction in the normal TX FIFO
*
****************************************************************************/
static void mrf24j40_norm_setup(FAR struct mrf24j40_radio_s *dev,
FAR struct iob_s *frame, bool csma)
{
uint8_t reg;
/* Enable tx int */
reg = mrf24j40_getreg(dev->spi, MRF24J40_INTCON);
reg &= ~MRF24J40_INTCON_TXNIE;
mrf24j40_setreg(dev->spi, MRF24J40_INTCON, reg);
/* Enable/Disable CSMA mode */
reg = mrf24j40_getreg(dev->spi, MRF24J40_TXMCR);
if (csma)
{
reg &= ~MRF24J40_TXMCR_NOCSMA;
}
else
{
reg |= MRF24J40_TXMCR_NOCSMA;
}
mrf24j40_setreg(dev->spi, MRF24J40_TXMCR, reg);
/* Setup the FIFO */
mrf24j40_setup_fifo(dev, frame->io_data, frame->io_len, MRF24J40_TXNORM_FIFO);
/* If the frame control field contains an acknowledgment request, set the
* TXNACKREQ bit. See IEEE 802.15.4/2003 7.2.1.1 page 112 for info.
*/
reg = mrf24j40_getreg(dev->spi, MRF24J40_TXNCON);
if (frame->io_data[0] & IEEE802154_FRAMECTRL_ACKREQ)
{
reg |= MRF24J40_TXNCON_TXNACKREQ;
}
else
{
reg &= ~MRF24J40_TXNCON_TXNACKREQ;
}
mrf24j40_setreg(dev->spi, MRF24J40_TXNCON, reg);
}
/****************************************************************************
* Name: mrf24j40_norm_trigger
*
* Description:
* Trigger the normal TX FIFO
*
****************************************************************************/
static inline void mrf24j40_norm_trigger(FAR struct mrf24j40_radio_s *dev)
{
uint8_t reg;
reg = mrf24j40_getreg(dev->spi, MRF24J40_TXNCON);
reg |= MRF24J40_TXNCON_TXNTRIG;
mrf24j40_setreg(dev->spi, MRF24J40_TXNCON, reg);
}
/****************************************************************************
* Name: mrf24j40_beacon_trigger
*
* Description:
* Trigger the beacon TX FIFO
*
****************************************************************************/
static inline void mrf24j40_beacon_trigger(FAR struct mrf24j40_radio_s *dev)
{
uint8_t reg;
reg = mrf24j40_getreg(dev->spi, MRF24J40_TXBCON0);
reg |= MRF24J40_TXBCON0_TXBTRIG;
mrf24j40_setreg(dev->spi, MRF24J40_TXBCON0, reg);
}
/****************************************************************************
* Name: mrf24j40_gts_setup
*
* Description:
* Setup a GTS transaction in one of the GTS FIFOs
*
****************************************************************************/
static void mrf24j40_gts_setup(FAR struct mrf24j40_radio_s *dev, uint8_t fifo,
FAR struct iob_s *frame)
{
}
/****************************************************************************
* Name: mrf24j40_setup_fifo
*
* Description:
*
****************************************************************************/
static void mrf24j40_setup_fifo(FAR struct mrf24j40_radio_s *dev,
FAR const uint8_t *buf, uint8_t length,
uint32_t fifo_addr)
{
int hlen = 3; /* Include frame control and seq number */
int i;
uint16_t frame_ctrl;
/* Analyze frame control to compute header length */
frame_ctrl = buf[0];
frame_ctrl |= (buf[1] << 8);
if ((frame_ctrl & IEEE802154_FRAMECTRL_DADDR)== IEEE802154_ADDRMODE_SHORT)
{
hlen += 2 + 2; /* Destination PAN + shortaddr */
}
else if ((frame_ctrl & IEEE802154_FRAMECTRL_DADDR) == IEEE802154_ADDRMODE_EXTENDED)
{
hlen += 2 + 8; /* Destination PAN + extaddr */
}
if (!(frame_ctrl & IEEE802154_FRAMECTRL_PANIDCOMP))
{
hlen += 2; /* No PAN compression, source PAN is different from dest PAN */
}
if ((frame_ctrl & IEEE802154_FRAMECTRL_SADDR)== IEEE802154_ADDRMODE_SHORT)
{
hlen += 2; /* Source saddr */
}
else if ((frame_ctrl & IEEE802154_FRAMECTRL_SADDR) == IEEE802154_ADDRMODE_EXTENDED)
{
hlen += 8; /* Ext saddr */
}
/* Header len, 0, TODO for security modes */
mrf24j40_setreg(dev->spi, fifo_addr++, hlen);
/* Frame length */
mrf24j40_setreg(dev->spi, fifo_addr++, length);
/* Frame data */
for (i = 0; i < length; i++)
{
mrf24j40_setreg(dev->spi, fifo_addr++, buf[i]);
}
}
/****************************************************************************
* Name: mrf24j40_irqwork_txnorm
*
* Description:
* Manage completion of packet transmission.
*
****************************************************************************/
static void mrf24j40_irqwork_txnorm(FAR struct mrf24j40_radio_s *dev)
{
uint8_t reg;
enum ieee802154_status_e status;
bool framepending;
/* Disable tx int */
reg = mrf24j40_getreg(dev->spi, MRF24J40_INTCON);
reg |= MRF24J40_INTCON_TXNIE;
mrf24j40_setreg(dev->spi, MRF24J40_INTCON, reg);
/* Get the status from the device and copy the status into the tx desc.
* The status for the normal FIFO is represented with bit TXNSTAT where
* 0=success, 1= failure.
*/
reg = mrf24j40_getreg(dev->spi, MRF24J40_TXSTAT);
/* TXNSTAT = 0: Transmission was successful
* TXNSTAT = 1: Transmission failed, retry count exceeded
*/
if (reg & MRF24J40_TXSTAT_TXNSTAT)
{
/* The number of retries of the most recent transmission is contained in the
* TXNRETRY (TXSTAT 0x24<7:6>) bits. The CCAFAIL (TXSTAT 0x24<5>) bit = 1
* indicates if the failed transmission was due to the channel busy
* (CSMA-CA timed out).
*/
if (reg & MRF24J40_TXSTAT_CCAFAIL)
{
status = IEEE802154_STATUS_CHANNEL_ACCESS_FAILURE;
}
else
{
status = IEEE802154_STATUS_NO_ACK;
}
}
else
{
status = IEEE802154_STATUS_SUCCESS;
}
framepending = (mrf24j40_getreg(dev->spi, MRF24J40_TXNCON) &
MRF24J40_TXNCON_FPSTAT);
if (dev->txdelayed_busy)
{
/* Inform the next layer of the transmission success/failure */
dev->txdelayed_desc->conf->status = status;
dev->txdelayed_desc->framepending = framepending;
dev->radiocb->txdone(dev->radiocb, dev->txdelayed_desc);
dev->txdelayed_busy = false;
if (dev->reschedule_csma)
{
mrf24j40_norm_setup(dev, dev->csma_desc->frame, true);
mrf24j40_norm_trigger(dev);
dev->reschedule_csma = false;
}
}
else
{
/* Inform the next layer of the transmission success/failure */
dev->csma_desc->conf->status = status;
dev->csma_desc->framepending = framepending;
dev->radiocb->txdone(dev->radiocb, dev->csma_desc);
/* We are now done with the transaction */
dev->csma_busy = 0;
/* Must unlock the radio before calling poll */
sem_post(&dev->exclsem);
mrf24j40_dopoll_csma(dev);
while (sem_wait(&dev->exclsem) != 0) { }
}
}
/****************************************************************************
* Name: mrf24j40_irqwork_gts
*
* Description:
* Manage completion of packet transmission.
*
****************************************************************************/
static void mrf24j40_irqwork_txgts(FAR struct mrf24j40_radio_s *dev,
uint8_t gts)
{
uint8_t txstat;
/* Disable tx int */
txstat = mrf24j40_getreg(dev->spi, MRF24J40_INTCON);
txstat |= MRF24J40_INTCON_TXNIE;
mrf24j40_setreg(dev->spi, MRF24J40_INTCON, txstat);
/* Get the status from the device and copy the status into the tx desc.
* The status for the normal FIFO is represented with bit TXNSTAT where
* 0=success, 1= failure.
*/
txstat = mrf24j40_getreg(dev->spi, MRF24J40_TXSTAT);
if (gts == 0)
{
dev->csma_desc->conf->status = txstat & MRF24J40_TXSTAT_TXG1STAT;
}
else if (gts == 1)
{
dev->csma_desc->conf->status = txstat & MRF24J40_TXSTAT_TXG2STAT;
}
/* Inform the next layer of the transmission success/failure */
dev->radiocb->txdone(dev->radiocb, dev->gts_desc[gts]);
/* We are now done with the transaction */
dev->gts_busy[gts]= 0;
mrf24j40_dopoll_gts(dev);
}
/****************************************************************************
* Name: mrf24j40_rxenable
*
* Description:
* Enable/Disable receiver.
*
****************************************************************************/
static int mrf24j40_rxenable(FAR struct ieee802154_radio_s *radio, bool enable)
{
FAR struct mrf24j40_radio_s *dev = (FAR struct mrf24j40_radio_s *)radio;
uint8_t reg;
dev->rxenabled = enable;
if (enable)
{
/* Disable packet reception. See pg. 109 of datasheet */
mrf24j40_setreg(dev->spi, MRF24J40_BBREG1, MRF24J40_BBREG1_RXDECINV);
/* Enable rx int */
reg = mrf24j40_getreg(dev->spi, MRF24J40_INTCON);
reg &= ~MRF24J40_INTCON_RXIE;
mrf24j40_setreg(dev->spi, MRF24J40_INTCON, reg);
/* Purge the RX buffer */
reg = mrf24j40_getreg(dev->spi, MRF24J40_RXFLUSH);
reg |= MRF24J40_RXFLUSH_RXFLUSH;
mrf24j40_setreg(dev->spi, MRF24J40_RXFLUSH, reg);
/* Re-enable packet reception. See pg. 109 of datasheet */
mrf24j40_setreg(dev->spi, MRF24J40_BBREG1, 0);
}
else
{
/* Disable rx int */
reg = mrf24j40_getreg(dev->spi, MRF24J40_INTCON);
reg |= MRF24J40_INTCON_RXIE;
mrf24j40_setreg(dev->spi, MRF24J40_INTCON, reg);
}
return OK;
}
/****************************************************************************
* Name: mrf24j40_irqwork_rx
*
* Description:
* Manage packet reception.
*
****************************************************************************/
static void mrf24j40_irqwork_rx(FAR struct mrf24j40_radio_s *dev)
{
FAR struct ieee802154_data_ind_s *ind;
uint32_t addr;
uint32_t index;
uint8_t reg;
wlinfo("RX interrupt\n");
/* Disable rx int */
reg = mrf24j40_getreg(dev->spi, MRF24J40_INTCON);
reg |= MRF24J40_INTCON_RXIE;
mrf24j40_setreg(dev->spi, MRF24J40_INTCON, reg);
/* Disable packet reception. See pg. 109 of datasheet */
mrf24j40_setreg(dev->spi, MRF24J40_BBREG1, MRF24J40_BBREG1_RXDECINV);
/* Allocate a data_ind to put the frame in */
ind = ieee802154_ind_allocate();
if (ind == NULL)
{
wlerr("ERROR: Unable to allocate data_ind. Discarding frame\n");
goto done;
}
/* Read packet */
addr = MRF24J40_RXBUF_BASE;
ind->frame->io_len = mrf24j40_getreg(dev->spi, addr++);
for (index = 0; index < ind->frame->io_len; index++)
{
ind->frame->io_data[index] = mrf24j40_getreg(dev->spi, addr++);
}
ind->lqi = mrf24j40_getreg(dev->spi, addr++);
ind->rssi = mrf24j40_getreg(dev->spi, addr++);
/* Reduce len by 2, we only receive frames with correct crc, no check
* required.
*/
ind->frame->io_len -= 2;
/* Callback the receiver in the next highest layer */
dev->radiocb->rxframe(dev->radiocb, ind);
done:
/* Enable reception of next packet by flushing the fifo.
* This is an MRF24J40 errata (no. 1).
*/
mrf24j40_setreg(dev->spi, MRF24J40_RXFLUSH, 1);
/* Only enable RX interrupt if we are to be listening when IDLE */
if (dev->rxenabled)
{
/* Enable packet reception */
mrf24j40_setreg(dev->spi, MRF24J40_BBREG1, 0);
reg = mrf24j40_getreg(dev->spi, MRF24J40_INTCON);
reg &= ~MRF24J40_INTCON_RXIE;
mrf24j40_setreg(dev->spi, MRF24J40_INTCON, reg);
}
}
/****************************************************************************
* Name: mrf24j40_irqworker
*
* Description:
* Perform interrupt handling logic outside of the interrupt handler (on
* the work queue thread).
*
* Parameters:
* arg - The reference to the driver structure (cast to void*)
*
* Returned Value:
* None
*
* Assumptions:
*
****************************************************************************/
static void mrf24j40_irqworker(FAR void *arg)
{
FAR struct mrf24j40_radio_s *dev = (FAR struct mrf24j40_radio_s *)arg;
uint8_t intstat;
uint8_t reg;
DEBUGASSERT(dev);
DEBUGASSERT(dev->spi);
/* Get exclusive access to the driver */
while (sem_wait(&dev->exclsem) != 0) { }
/* Read and store INTSTAT - this clears the register. */
intstat = mrf24j40_getreg(dev->spi, MRF24J40_INTSTAT);
/* Do work according to the pending interrupts */
if ((intstat & MRF24J40_INTSTAT_HSYMTMRIF))
{
/* As of now the only use for the MAC timer is for delayed transactions.
* Therefore, all we do here is trigger the TX norm FIFO
*/
mrf24j40_norm_trigger(dev);
/* Timers are one-shot, so disable the interrupt */
reg = mrf24j40_getreg(dev->spi, MRF24J40_INTCON);
reg |= MRF24J40_INTCON_HSYMTMRIE;
mrf24j40_setreg(dev->spi, MRF24J40_INTCON, reg);
}
if ((intstat & MRF24J40_INTSTAT_RXIF) && dev->rxenabled)
{
/* A packet was received, retrieve it */
mrf24j40_irqwork_rx(dev);
}
if ((intstat & MRF24J40_INTSTAT_TXNIF))
{
/* A packet was transmitted or failed*/
mrf24j40_irqwork_txnorm(dev);
}
if ((intstat & MRF24J40_INTSTAT_TXG1IF))
{
/* A packet was transmitted or failed*/
mrf24j40_irqwork_txgts(dev, 0);
}
if ((intstat & MRF24J40_INTSTAT_TXG1IF))
{
/* A packet was transmitted or failed*/
mrf24j40_irqwork_txgts(dev, 1);
}
if ((intstat & MRF24J40_INTSTAT_SLPIF))
{
dev->radiocb->sfevent(dev->radiocb, IEEE802154_SFEVENT_ENDOFACTIVE);
/* Acknowledge the alert and put the device to sleep */
reg = mrf24j40_getreg(dev->spi, MRF24J40_SLPACK);
reg |= MRF24J40_SLPACK_SLPACK;
mrf24j40_setreg(dev->spi, MRF24J40_SLPACK, reg);
}
Fix dangling white space at the end of lines.
2017-07-03 18:08:49 +02:00
drivers/wireless/ieee802154: Moved radios to individual sub-directories
2017-07-03 06:33:17 +02:00
if ((intstat & MRF24J40_INTSTAT_WAKEIF))
{
ieee802154: Adds configuration options for verbose logging of certain features, to aid in debugging
2017-07-10 05:57:11 +02:00
#ifdef CONFIG_MAC802154_SFEVENT_VERBOSE
drivers/wireless/ieee802154: Moved radios to individual sub-directories
2017-07-03 06:33:17 +02:00
wlinfo("Wake Interrupt\n");
ieee802154: Adds configuration options for verbose logging of certain features, to aid in debugging
2017-07-10 05:57:11 +02:00
#endif
drivers/wireless/ieee802154: Moved radios to individual sub-directories
2017-07-03 06:33:17 +02:00
/* This is right before the beacon, we set the bsn here, since the MAC
* uses the SLPIF (end of active portion of superframe). to make any
* changes to the beacon. This assumes that any changes to the beacon
Fix dangling white space at the end of lines.
2017-07-03 18:08:49 +02:00
* be in by the time that this interrupt fires.
drivers/wireless/ieee802154: Moved radios to individual sub-directories
2017-07-03 06:33:17 +02:00
*/
mrf24j40_setreg(dev->spi, MRF24J40_BEACON_FIFO + 4, dev->bsn++);
mrf24j40_beacon_trigger(dev);
}
/* Unlock the radio device */
sem_post(&dev->exclsem);
/* Re-enable GPIO interrupts */
dev->lower->enable(dev->lower, true);
}
/****************************************************************************
* Name: mrf24j40_interrupt
*
* Description:
* Hardware interrupt handler
*
* Parameters:
* irq - Number of the IRQ that generated the interrupt
* context - Interrupt register state save info (architecture-specific)
*
* Returned Value:
* OK on success
*
* Assumptions:
*
****************************************************************************/
static int mrf24j40_interrupt(int irq, FAR void *context, FAR void *arg)
{
FAR struct mrf24j40_radio_s *dev = (FAR struct mrf24j40_radio_s *)arg;
DEBUGASSERT(dev != NULL);
/* In complex environments, we cannot do SPI transfers from the interrupt
* handler because semaphores are probably used to lock the SPI bus. In
* this case, we will defer processing to the worker thread. This is also
* much kinder in the use of system resources and is, therefore, probably
* a good thing to do in any event.
*/
DEBUGASSERT(work_available(&dev->irqwork));
/* Notice that further GPIO interrupts are disabled until the work is
* actually performed. This is to prevent overrun of the worker thread.
* Interrupts are re-enabled in enc_irqworker() when the work is completed.
*/
dev->lower->enable(dev->lower, false);
return work_queue(HPWORK, &dev->irqwork, mrf24j40_irqworker, (FAR void *)dev, 0);
}
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: mrf24j40_init
*
* Description:
* Return an mrf24j40 device for use by other drivers.
*
****************************************************************************/
FAR struct ieee802154_radio_s *mrf24j40_init(FAR struct spi_dev_s *spi,
FAR const struct mrf24j40_lower_s *lower)
{
FAR struct mrf24j40_radio_s *dev;
dev = kmm_zalloc(sizeof(struct mrf24j40_radio_s));
if (dev == NULL)
{
return NULL;
}
/* Attach irq */
if (lower->attach(lower, mrf24j40_interrupt, dev) != OK)
{
#if 0
free(dev);
#endif
return NULL;
}
/* Allow exclusive access to the privmac struct */
sem_init(&dev->exclsem, 0, 1);
dev->radio.bind = mrf24j40_bind;
dev->radio.reset = mrf24j40_reset;
dev->radio.getattr = mrf24j40_getattr;
dev->radio.setattr = mrf24j40_setattr;
dev->radio.txnotify = mrf24j40_txnotify;
dev->radio.txdelayed = mrf24j40_txdelayed;
dev->radio.rxenable = mrf24j40_rxenable;
dev->radio.beaconstart = mrf24j40_beaconstart;
dev->radio.beaconupdate = mrf24j40_beaconupdate;
dev->radio.beaconstop = mrf24j40_beaconstop;
dev->radio.sfupdate = mrf24j40_sfupdate;
dev->lower = lower;
dev->spi = spi;
mrf24j40_reset(&dev->radio);
dev->lower->enable(dev->lower, true);
return &dev->radio;
}
Reference in New Issue Copy Permalink