nuttx/boards/arm/stm32f0l0g0/b-l072z-lrwan1/scripts/ld.script

129 lines
4.3 KiB
Plaintext
Raw Normal View History

Brings in initial WIP support for the STML0. This initial commit is in pretty bad shape and, hence it it marked EXPERIMENTAL." Squashed commit of the following: arch/arm/src/stm32f0l0: Various changes for a clean compilation. Still does not compile correctly due to missing FLASH latency definitions. arch/arm/src/stm32f0l0/hardware: Add framework for the STM32 L0. Currently set to same as the STM32F0. arch/arm/src/stm32f0l0/hardware: Very fragmentary FLASH header register definitions for the STM32 L0. arch/arm/src/stm32f0l0: Bring in DMA v1. Cannot possibly be functionaly yet due to the limited number for M0 interrupts. arch/arm/src/stm32f0l0: Add STM32 F0/L0 LSE and backup power domain controls. arch/arm/src/stm32f0l0/hardware/stm32l0_pwr.h: Add STM32L0 PWR header file. arch/arm/include/stm32f0l0/chip.h: Clean up WIP chip header file. arch/arm/include/stm32f0l0/chip.h: WIP. arm/src/stm32f0l0: Resolve some small differences between F0 and L0 GPIO pin options. arch/arm/src/stm32f0l0: Better integrate STM32L0 header files. nuttx/arch/arm/include/stm32f0l0: Add STM32L0 IRQ number definition file. arch/arm/src/stm32f0l0: Add STM32L0 RCC driver. arch/arm/src/stm32f0l0/hardware: Adds basic STM32L0 header files. arch/arm/src/stm32f0l0: Add STM32L0 chip selections. configs/: Hook new STM32L0 boards into the configuration system. configs: nucleo boards use as default ST LINK MCO as clock input from MCU and for this HSEBYP must be enabled configs: add basic support for nucleo-l073rz configs: add basic support for b-l072z-lrwan1
2018-12-19 19:36:35 +01:00
/****************************************************************************
* boards/arm/stm32f0l0g0/b-l072z-lrwan1/scripts/ld.script
Brings in initial WIP support for the STML0. This initial commit is in pretty bad shape and, hence it it marked EXPERIMENTAL." Squashed commit of the following: arch/arm/src/stm32f0l0: Various changes for a clean compilation. Still does not compile correctly due to missing FLASH latency definitions. arch/arm/src/stm32f0l0/hardware: Add framework for the STM32 L0. Currently set to same as the STM32F0. arch/arm/src/stm32f0l0/hardware: Very fragmentary FLASH header register definitions for the STM32 L0. arch/arm/src/stm32f0l0: Bring in DMA v1. Cannot possibly be functionaly yet due to the limited number for M0 interrupts. arch/arm/src/stm32f0l0: Add STM32 F0/L0 LSE and backup power domain controls. arch/arm/src/stm32f0l0/hardware/stm32l0_pwr.h: Add STM32L0 PWR header file. arch/arm/include/stm32f0l0/chip.h: Clean up WIP chip header file. arch/arm/include/stm32f0l0/chip.h: WIP. arm/src/stm32f0l0: Resolve some small differences between F0 and L0 GPIO pin options. arch/arm/src/stm32f0l0: Better integrate STM32L0 header files. nuttx/arch/arm/include/stm32f0l0: Add STM32L0 IRQ number definition file. arch/arm/src/stm32f0l0: Add STM32L0 RCC driver. arch/arm/src/stm32f0l0/hardware: Adds basic STM32L0 header files. arch/arm/src/stm32f0l0: Add STM32L0 chip selections. configs/: Hook new STM32L0 boards into the configuration system. configs: nucleo boards use as default ST LINK MCO as clock input from MCU and for this HSEBYP must be enabled configs: add basic support for nucleo-l073rz configs: add basic support for b-l072z-lrwan1
2018-12-19 19:36:35 +01:00
*
* Copyright (C) 2018 Gregory Nutt. All rights reserved.
* Authors: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/* The STM32LO72CZ has 192Kb of FLASH beginning at address 0x0800:0000.
* 20Kb of SRAM and 6Kb of EEPROM
*
* When booting from FLASH, FLASH memory is aliased to address 0x0000:0000
* where the code expects to begin execution by jumping to the entry point in
* the 0x0800:0000 address range.
*/
MEMORY
{
flash (rx) : ORIGIN = 0x08000000, LENGTH = 192K
sram (rwx) : ORIGIN = 0x20000000, LENGTH = 20K
}
OUTPUT_ARCH(arm)
EXTERN(_vectors)
ENTRY(_stext)
SECTIONS
{
.text : {
_stext = ABSOLUTE(.);
*(.vectors)
*(.text .text.*)
*(.fixup)
*(.gnu.warning)
*(.rodata .rodata.*)
*(.gnu.linkonce.t.*)
*(.glue_7)
*(.glue_7t)
*(.got)
*(.gcc_except_table)
*(.gnu.linkonce.r.*)
_etext = ABSOLUTE(.);
} > flash
Brings in initial WIP support for the STML0. This initial commit is in pretty bad shape and, hence it it marked EXPERIMENTAL." Squashed commit of the following: arch/arm/src/stm32f0l0: Various changes for a clean compilation. Still does not compile correctly due to missing FLASH latency definitions. arch/arm/src/stm32f0l0/hardware: Add framework for the STM32 L0. Currently set to same as the STM32F0. arch/arm/src/stm32f0l0/hardware: Very fragmentary FLASH header register definitions for the STM32 L0. arch/arm/src/stm32f0l0: Bring in DMA v1. Cannot possibly be functionaly yet due to the limited number for M0 interrupts. arch/arm/src/stm32f0l0: Add STM32 F0/L0 LSE and backup power domain controls. arch/arm/src/stm32f0l0/hardware/stm32l0_pwr.h: Add STM32L0 PWR header file. arch/arm/include/stm32f0l0/chip.h: Clean up WIP chip header file. arch/arm/include/stm32f0l0/chip.h: WIP. arm/src/stm32f0l0: Resolve some small differences between F0 and L0 GPIO pin options. arch/arm/src/stm32f0l0: Better integrate STM32L0 header files. nuttx/arch/arm/include/stm32f0l0: Add STM32L0 IRQ number definition file. arch/arm/src/stm32f0l0: Add STM32L0 RCC driver. arch/arm/src/stm32f0l0/hardware: Adds basic STM32L0 header files. arch/arm/src/stm32f0l0: Add STM32L0 chip selections. configs/: Hook new STM32L0 boards into the configuration system. configs: nucleo boards use as default ST LINK MCO as clock input from MCU and for this HSEBYP must be enabled configs: add basic support for nucleo-l073rz configs: add basic support for b-l072z-lrwan1
2018-12-19 19:36:35 +01:00
. = ALIGN(4);
.init_section : {
_sinit = ABSOLUTE(.);
*(.init_array .init_array.*)
_einit = ABSOLUTE(.);
} > flash
Brings in initial WIP support for the STML0. This initial commit is in pretty bad shape and, hence it it marked EXPERIMENTAL." Squashed commit of the following: arch/arm/src/stm32f0l0: Various changes for a clean compilation. Still does not compile correctly due to missing FLASH latency definitions. arch/arm/src/stm32f0l0/hardware: Add framework for the STM32 L0. Currently set to same as the STM32F0. arch/arm/src/stm32f0l0/hardware: Very fragmentary FLASH header register definitions for the STM32 L0. arch/arm/src/stm32f0l0: Bring in DMA v1. Cannot possibly be functionaly yet due to the limited number for M0 interrupts. arch/arm/src/stm32f0l0: Add STM32 F0/L0 LSE and backup power domain controls. arch/arm/src/stm32f0l0/hardware/stm32l0_pwr.h: Add STM32L0 PWR header file. arch/arm/include/stm32f0l0/chip.h: Clean up WIP chip header file. arch/arm/include/stm32f0l0/chip.h: WIP. arm/src/stm32f0l0: Resolve some small differences between F0 and L0 GPIO pin options. arch/arm/src/stm32f0l0: Better integrate STM32L0 header files. nuttx/arch/arm/include/stm32f0l0: Add STM32L0 IRQ number definition file. arch/arm/src/stm32f0l0: Add STM32L0 RCC driver. arch/arm/src/stm32f0l0/hardware: Adds basic STM32L0 header files. arch/arm/src/stm32f0l0: Add STM32L0 chip selections. configs/: Hook new STM32L0 boards into the configuration system. configs: nucleo boards use as default ST LINK MCO as clock input from MCU and for this HSEBYP must be enabled configs: add basic support for nucleo-l073rz configs: add basic support for b-l072z-lrwan1
2018-12-19 19:36:35 +01:00
. = ALIGN(4);
.ARM.extab : {
*(.ARM.extab*)
} > flash
Brings in initial WIP support for the STML0. This initial commit is in pretty bad shape and, hence it it marked EXPERIMENTAL." Squashed commit of the following: arch/arm/src/stm32f0l0: Various changes for a clean compilation. Still does not compile correctly due to missing FLASH latency definitions. arch/arm/src/stm32f0l0/hardware: Add framework for the STM32 L0. Currently set to same as the STM32F0. arch/arm/src/stm32f0l0/hardware: Very fragmentary FLASH header register definitions for the STM32 L0. arch/arm/src/stm32f0l0: Bring in DMA v1. Cannot possibly be functionaly yet due to the limited number for M0 interrupts. arch/arm/src/stm32f0l0: Add STM32 F0/L0 LSE and backup power domain controls. arch/arm/src/stm32f0l0/hardware/stm32l0_pwr.h: Add STM32L0 PWR header file. arch/arm/include/stm32f0l0/chip.h: Clean up WIP chip header file. arch/arm/include/stm32f0l0/chip.h: WIP. arm/src/stm32f0l0: Resolve some small differences between F0 and L0 GPIO pin options. arch/arm/src/stm32f0l0: Better integrate STM32L0 header files. nuttx/arch/arm/include/stm32f0l0: Add STM32L0 IRQ number definition file. arch/arm/src/stm32f0l0: Add STM32L0 RCC driver. arch/arm/src/stm32f0l0/hardware: Adds basic STM32L0 header files. arch/arm/src/stm32f0l0: Add STM32L0 chip selections. configs/: Hook new STM32L0 boards into the configuration system. configs: nucleo boards use as default ST LINK MCO as clock input from MCU and for this HSEBYP must be enabled configs: add basic support for nucleo-l073rz configs: add basic support for b-l072z-lrwan1
2018-12-19 19:36:35 +01:00
. = ALIGN(4);
__exidx_start = ABSOLUTE(.);
.ARM.exidx : {
*(.ARM.exidx*)
} > flash
__exidx_end = ABSOLUTE(.);
Brings in initial WIP support for the STML0. This initial commit is in pretty bad shape and, hence it it marked EXPERIMENTAL." Squashed commit of the following: arch/arm/src/stm32f0l0: Various changes for a clean compilation. Still does not compile correctly due to missing FLASH latency definitions. arch/arm/src/stm32f0l0/hardware: Add framework for the STM32 L0. Currently set to same as the STM32F0. arch/arm/src/stm32f0l0/hardware: Very fragmentary FLASH header register definitions for the STM32 L0. arch/arm/src/stm32f0l0: Bring in DMA v1. Cannot possibly be functionaly yet due to the limited number for M0 interrupts. arch/arm/src/stm32f0l0: Add STM32 F0/L0 LSE and backup power domain controls. arch/arm/src/stm32f0l0/hardware/stm32l0_pwr.h: Add STM32L0 PWR header file. arch/arm/include/stm32f0l0/chip.h: Clean up WIP chip header file. arch/arm/include/stm32f0l0/chip.h: WIP. arm/src/stm32f0l0: Resolve some small differences between F0 and L0 GPIO pin options. arch/arm/src/stm32f0l0: Better integrate STM32L0 header files. nuttx/arch/arm/include/stm32f0l0: Add STM32L0 IRQ number definition file. arch/arm/src/stm32f0l0: Add STM32L0 RCC driver. arch/arm/src/stm32f0l0/hardware: Adds basic STM32L0 header files. arch/arm/src/stm32f0l0: Add STM32L0 chip selections. configs/: Hook new STM32L0 boards into the configuration system. configs: nucleo boards use as default ST LINK MCO as clock input from MCU and for this HSEBYP must be enabled configs: add basic support for nucleo-l073rz configs: add basic support for b-l072z-lrwan1
2018-12-19 19:36:35 +01:00
_eronly = ABSOLUTE(.);
Brings in initial WIP support for the STML0. This initial commit is in pretty bad shape and, hence it it marked EXPERIMENTAL." Squashed commit of the following: arch/arm/src/stm32f0l0: Various changes for a clean compilation. Still does not compile correctly due to missing FLASH latency definitions. arch/arm/src/stm32f0l0/hardware: Add framework for the STM32 L0. Currently set to same as the STM32F0. arch/arm/src/stm32f0l0/hardware: Very fragmentary FLASH header register definitions for the STM32 L0. arch/arm/src/stm32f0l0: Bring in DMA v1. Cannot possibly be functionaly yet due to the limited number for M0 interrupts. arch/arm/src/stm32f0l0: Add STM32 F0/L0 LSE and backup power domain controls. arch/arm/src/stm32f0l0/hardware/stm32l0_pwr.h: Add STM32L0 PWR header file. arch/arm/include/stm32f0l0/chip.h: Clean up WIP chip header file. arch/arm/include/stm32f0l0/chip.h: WIP. arm/src/stm32f0l0: Resolve some small differences between F0 and L0 GPIO pin options. arch/arm/src/stm32f0l0: Better integrate STM32L0 header files. nuttx/arch/arm/include/stm32f0l0: Add STM32L0 IRQ number definition file. arch/arm/src/stm32f0l0: Add STM32L0 RCC driver. arch/arm/src/stm32f0l0/hardware: Adds basic STM32L0 header files. arch/arm/src/stm32f0l0: Add STM32L0 chip selections. configs/: Hook new STM32L0 boards into the configuration system. configs: nucleo boards use as default ST LINK MCO as clock input from MCU and for this HSEBYP must be enabled configs: add basic support for nucleo-l073rz configs: add basic support for b-l072z-lrwan1
2018-12-19 19:36:35 +01:00
/* The RAM vector table (if present) should lie at the beginning of SRAM */
Brings in initial WIP support for the STML0. This initial commit is in pretty bad shape and, hence it it marked EXPERIMENTAL." Squashed commit of the following: arch/arm/src/stm32f0l0: Various changes for a clean compilation. Still does not compile correctly due to missing FLASH latency definitions. arch/arm/src/stm32f0l0/hardware: Add framework for the STM32 L0. Currently set to same as the STM32F0. arch/arm/src/stm32f0l0/hardware: Very fragmentary FLASH header register definitions for the STM32 L0. arch/arm/src/stm32f0l0: Bring in DMA v1. Cannot possibly be functionaly yet due to the limited number for M0 interrupts. arch/arm/src/stm32f0l0: Add STM32 F0/L0 LSE and backup power domain controls. arch/arm/src/stm32f0l0/hardware/stm32l0_pwr.h: Add STM32L0 PWR header file. arch/arm/include/stm32f0l0/chip.h: Clean up WIP chip header file. arch/arm/include/stm32f0l0/chip.h: WIP. arm/src/stm32f0l0: Resolve some small differences between F0 and L0 GPIO pin options. arch/arm/src/stm32f0l0: Better integrate STM32L0 header files. nuttx/arch/arm/include/stm32f0l0: Add STM32L0 IRQ number definition file. arch/arm/src/stm32f0l0: Add STM32L0 RCC driver. arch/arm/src/stm32f0l0/hardware: Adds basic STM32L0 header files. arch/arm/src/stm32f0l0: Add STM32L0 chip selections. configs/: Hook new STM32L0 boards into the configuration system. configs: nucleo boards use as default ST LINK MCO as clock input from MCU and for this HSEBYP must be enabled configs: add basic support for nucleo-l073rz configs: add basic support for b-l072z-lrwan1
2018-12-19 19:36:35 +01:00
.ram_vectors : {
*(.ram_vectors)
} > sram
Brings in initial WIP support for the STML0. This initial commit is in pretty bad shape and, hence it it marked EXPERIMENTAL." Squashed commit of the following: arch/arm/src/stm32f0l0: Various changes for a clean compilation. Still does not compile correctly due to missing FLASH latency definitions. arch/arm/src/stm32f0l0/hardware: Add framework for the STM32 L0. Currently set to same as the STM32F0. arch/arm/src/stm32f0l0/hardware: Very fragmentary FLASH header register definitions for the STM32 L0. arch/arm/src/stm32f0l0: Bring in DMA v1. Cannot possibly be functionaly yet due to the limited number for M0 interrupts. arch/arm/src/stm32f0l0: Add STM32 F0/L0 LSE and backup power domain controls. arch/arm/src/stm32f0l0/hardware/stm32l0_pwr.h: Add STM32L0 PWR header file. arch/arm/include/stm32f0l0/chip.h: Clean up WIP chip header file. arch/arm/include/stm32f0l0/chip.h: WIP. arm/src/stm32f0l0: Resolve some small differences between F0 and L0 GPIO pin options. arch/arm/src/stm32f0l0: Better integrate STM32L0 header files. nuttx/arch/arm/include/stm32f0l0: Add STM32L0 IRQ number definition file. arch/arm/src/stm32f0l0: Add STM32L0 RCC driver. arch/arm/src/stm32f0l0/hardware: Adds basic STM32L0 header files. arch/arm/src/stm32f0l0: Add STM32L0 chip selections. configs/: Hook new STM32L0 boards into the configuration system. configs: nucleo boards use as default ST LINK MCO as clock input from MCU and for this HSEBYP must be enabled configs: add basic support for nucleo-l073rz configs: add basic support for b-l072z-lrwan1
2018-12-19 19:36:35 +01:00
. = ALIGN(4);
.data : {
_sdata = ABSOLUTE(.);
*(.data .data.*)
*(.gnu.linkonce.d.*)
CONSTRUCTORS
_edata = ABSOLUTE(.);
} > sram AT > flash
Brings in initial WIP support for the STML0. This initial commit is in pretty bad shape and, hence it it marked EXPERIMENTAL." Squashed commit of the following: arch/arm/src/stm32f0l0: Various changes for a clean compilation. Still does not compile correctly due to missing FLASH latency definitions. arch/arm/src/stm32f0l0/hardware: Add framework for the STM32 L0. Currently set to same as the STM32F0. arch/arm/src/stm32f0l0/hardware: Very fragmentary FLASH header register definitions for the STM32 L0. arch/arm/src/stm32f0l0: Bring in DMA v1. Cannot possibly be functionaly yet due to the limited number for M0 interrupts. arch/arm/src/stm32f0l0: Add STM32 F0/L0 LSE and backup power domain controls. arch/arm/src/stm32f0l0/hardware/stm32l0_pwr.h: Add STM32L0 PWR header file. arch/arm/include/stm32f0l0/chip.h: Clean up WIP chip header file. arch/arm/include/stm32f0l0/chip.h: WIP. arm/src/stm32f0l0: Resolve some small differences between F0 and L0 GPIO pin options. arch/arm/src/stm32f0l0: Better integrate STM32L0 header files. nuttx/arch/arm/include/stm32f0l0: Add STM32L0 IRQ number definition file. arch/arm/src/stm32f0l0: Add STM32L0 RCC driver. arch/arm/src/stm32f0l0/hardware: Adds basic STM32L0 header files. arch/arm/src/stm32f0l0: Add STM32L0 chip selections. configs/: Hook new STM32L0 boards into the configuration system. configs: nucleo boards use as default ST LINK MCO as clock input from MCU and for this HSEBYP must be enabled configs: add basic support for nucleo-l073rz configs: add basic support for b-l072z-lrwan1
2018-12-19 19:36:35 +01:00
.bss : {
_sbss = ABSOLUTE(.);
*(.bss .bss.*)
*(.gnu.linkonce.b.*)
*(COMMON)
_ebss = ABSOLUTE(.);
} > sram
Brings in initial WIP support for the STML0. This initial commit is in pretty bad shape and, hence it it marked EXPERIMENTAL." Squashed commit of the following: arch/arm/src/stm32f0l0: Various changes for a clean compilation. Still does not compile correctly due to missing FLASH latency definitions. arch/arm/src/stm32f0l0/hardware: Add framework for the STM32 L0. Currently set to same as the STM32F0. arch/arm/src/stm32f0l0/hardware: Very fragmentary FLASH header register definitions for the STM32 L0. arch/arm/src/stm32f0l0: Bring in DMA v1. Cannot possibly be functionaly yet due to the limited number for M0 interrupts. arch/arm/src/stm32f0l0: Add STM32 F0/L0 LSE and backup power domain controls. arch/arm/src/stm32f0l0/hardware/stm32l0_pwr.h: Add STM32L0 PWR header file. arch/arm/include/stm32f0l0/chip.h: Clean up WIP chip header file. arch/arm/include/stm32f0l0/chip.h: WIP. arm/src/stm32f0l0: Resolve some small differences between F0 and L0 GPIO pin options. arch/arm/src/stm32f0l0: Better integrate STM32L0 header files. nuttx/arch/arm/include/stm32f0l0: Add STM32L0 IRQ number definition file. arch/arm/src/stm32f0l0: Add STM32L0 RCC driver. arch/arm/src/stm32f0l0/hardware: Adds basic STM32L0 header files. arch/arm/src/stm32f0l0: Add STM32L0 chip selections. configs/: Hook new STM32L0 boards into the configuration system. configs: nucleo boards use as default ST LINK MCO as clock input from MCU and for this HSEBYP must be enabled configs: add basic support for nucleo-l073rz configs: add basic support for b-l072z-lrwan1
2018-12-19 19:36:35 +01:00
/* Stabs debugging sections. */
.stab 0 : { *(.stab) }
.stabstr 0 : { *(.stabstr) }
.stab.excl 0 : { *(.stab.excl) }
.stab.exclstr 0 : { *(.stab.exclstr) }
.stab.index 0 : { *(.stab.index) }
.stab.indexstr 0 : { *(.stab.indexstr) }
.comment 0 : { *(.comment) }
.debug_abbrev 0 : { *(.debug_abbrev) }
.debug_info 0 : { *(.debug_info) }
.debug_line 0 : { *(.debug_line) }
.debug_pubnames 0 : { *(.debug_pubnames) }
.debug_aranges 0 : { *(.debug_aranges) }
Brings in initial WIP support for the STML0. This initial commit is in pretty bad shape and, hence it it marked EXPERIMENTAL." Squashed commit of the following: arch/arm/src/stm32f0l0: Various changes for a clean compilation. Still does not compile correctly due to missing FLASH latency definitions. arch/arm/src/stm32f0l0/hardware: Add framework for the STM32 L0. Currently set to same as the STM32F0. arch/arm/src/stm32f0l0/hardware: Very fragmentary FLASH header register definitions for the STM32 L0. arch/arm/src/stm32f0l0: Bring in DMA v1. Cannot possibly be functionaly yet due to the limited number for M0 interrupts. arch/arm/src/stm32f0l0: Add STM32 F0/L0 LSE and backup power domain controls. arch/arm/src/stm32f0l0/hardware/stm32l0_pwr.h: Add STM32L0 PWR header file. arch/arm/include/stm32f0l0/chip.h: Clean up WIP chip header file. arch/arm/include/stm32f0l0/chip.h: WIP. arm/src/stm32f0l0: Resolve some small differences between F0 and L0 GPIO pin options. arch/arm/src/stm32f0l0: Better integrate STM32L0 header files. nuttx/arch/arm/include/stm32f0l0: Add STM32L0 IRQ number definition file. arch/arm/src/stm32f0l0: Add STM32L0 RCC driver. arch/arm/src/stm32f0l0/hardware: Adds basic STM32L0 header files. arch/arm/src/stm32f0l0: Add STM32L0 chip selections. configs/: Hook new STM32L0 boards into the configuration system. configs: nucleo boards use as default ST LINK MCO as clock input from MCU and for this HSEBYP must be enabled configs: add basic support for nucleo-l073rz configs: add basic support for b-l072z-lrwan1
2018-12-19 19:36:35 +01:00
}