nuttx/drivers/sensors/max44009.c

908 lines
21 KiB
C
Raw Normal View History

/****************************************************************************
* drivers/sensors/max44009.c
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <sys/types.h>
#include <assert.h>
#include <errno.h>
#include <debug.h>
#include <poll.h>
#include <stdio.h>
#include <nuttx/fs/fs.h>
#include <nuttx/i2c/i2c_master.h>
#include <nuttx/kmalloc.h>
#include <nuttx/mutex.h>
#include <nuttx/random.h>
#include <nuttx/sensors/max44009.h>
/****************************************************************************
* Pre-Processor Definitions
****************************************************************************/
#ifdef CONFIG_DEBUG_MAX44009
# define max44009_dbg(x, ...) _info(x, ##__VA_ARGS__)
#else
# define max44009_dbg(x, ...) sninfo(x, ##__VA_ARGS__)
#endif
#ifndef CONFIG_MAX44009_I2C_FREQUENCY
# define CONFIG_MAX44009_I2C_FREQUENCY 400000
#endif
/* Registers */
#define MAX44009_INT_STS 0x0
#define MAX44009_INT_EN 0x01
#define MAX44009_CONFIG 0x02
#define MAX44009_LUX_HBYTE 0x03
#define MAX44009_LUX_LBYTE 0x04
#define MAX44009_UP_THRESH_BYTE 0x05
#define MAX44009_LOW_THRESH_BYTE 0x06
#define MAX44009_THRESH_TIMER 0x07
/* Other constants */
#define MAX44009_I2C_RETRIES 10
/****************************************************************************
* Private Types
****************************************************************************/
struct max44009_dev_s
{
FAR struct max44009_config_s *config;
mutex_t dev_lock;
FAR struct i2c_master_s *i2c;
uint8_t addr;
uint8_t cref;
bool int_pending;
struct pollfd *fds[CONFIG_MAX44009_NPOLLWAITERS];
};
/****************************************************************************
* Private Function Prototypes
****************************************************************************/
static int max44009_open(FAR struct file *filep);
static int max44009_close(FAR struct file *filep);
static ssize_t max44009_read(FAR struct file *filep, FAR char *buffer,
size_t buflen);
static ssize_t max44009_write(FAR struct file *filep, FAR const char *buffer,
size_t buflen);
static int max44009_ioctl(FAR struct file *filep, int cmd,
unsigned long arg);
static int max44009_poll(FAR struct file *filep, FAR struct pollfd *fds,
bool setup);
static int max44009_read_data(FAR struct max44009_dev_s *priv,
FAR struct max44009_data_s *data);
/****************************************************************************
* Private Data
****************************************************************************/
static const struct file_operations g_alsops =
{
max44009_open, /* open */
max44009_close, /* close */
max44009_read, /* read */
max44009_write, /* write */
NULL, /* seek */
max44009_ioctl, /* ioctl */
max44009_poll /* poll */
#ifndef CONFIG_DISABLE_PSEUDOFS_OPERATIONS
, NULL /* unlink */
#endif
};
/****************************************************************************
* Private Functions
****************************************************************************/
static int max44009_do_transfer(FAR struct max44009_dev_s *dev,
FAR struct i2c_msg_s *msgv,
size_t nmsg)
{
int ret = -EIO;
int retries;
for (retries = 0; retries < MAX44009_I2C_RETRIES; retries++)
{
ret = I2C_TRANSFER(dev->i2c, msgv, nmsg);
if (ret >= 0)
{
return 0;
}
else
{
#ifdef CONFIG_I2C_RESET
/* Some error. Try to reset I2C bus and keep trying. */
if (retries == MAX44009_I2C_RETRIES - 1)
{
break;
}
ret = I2C_RESET(dev->i2c);
if (ret < 0)
{
max44009_dbg("I2C_RESET failed: %d\n", ret);
return ret;
}
#endif
}
}
max44009_dbg("xfer failed: %d\n", ret);
return ret;
}
static int max44009_write_reg8(FAR struct max44009_dev_s *dev,
FAR const uint8_t *command)
{
struct i2c_msg_s msgv[2] =
{
{
.frequency = CONFIG_MAX44009_I2C_FREQUENCY,
.addr = dev->addr,
.flags = 0,
.buffer = (void *)&command[0],
.length = 1
},
{
.frequency = CONFIG_MAX44009_I2C_FREQUENCY,
.addr = dev->addr,
.flags = I2C_M_NOSTART,
.buffer = (void *)&command[1],
.length = 1
}
};
return max44009_do_transfer(dev, msgv, 2);
}
static int max44009_read_reg8(FAR struct max44009_dev_s *dev,
FAR uint8_t *command,
FAR uint8_t *value)
{
struct i2c_msg_s msgv[2] =
{
{
.frequency = CONFIG_MAX44009_I2C_FREQUENCY,
.addr = dev->addr,
.flags = 0,
.buffer = command,
.length = 1
},
{
.frequency = CONFIG_MAX44009_I2C_FREQUENCY,
.addr = dev->addr,
.flags = I2C_M_READ,
.buffer = value,
.length = 1
}
};
return max44009_do_transfer(dev, msgv, 2);
}
static int max44009_open(FAR struct file *filep)
{
FAR struct inode *inode;
FAR struct max44009_dev_s *priv;
unsigned int use_count;
int ret;
DEBUGASSERT(filep);
inode = filep->f_inode;
DEBUGASSERT(inode && inode->i_private);
priv = (FAR struct max44009_dev_s *)inode->i_private;
ret = nxmutex_lock(&priv->dev_lock);
if (ret < 0)
{
return ret;
}
use_count = priv->cref + 1;
if (use_count == 1)
{
/* First user, do power on. */
ret = priv->config->set_power(priv->config, true);
if (ret < 0)
{
max44009_dbg("Cannot power on sensor: %d\n", ret);
goto out_lock;
}
priv->config->irq_enable(priv->config, true);
priv->cref = use_count;
}
else
{
DEBUGASSERT(use_count < UINT8_MAX && use_count > priv->cref);
priv->cref = use_count;
ret = 0;
}
max44009_dbg("Sensor is powered on\n");
out_lock:
nxmutex_unlock(&priv->dev_lock);
return ret;
}
static int max44009_close(FAR struct file *filep)
{
FAR struct inode *inode;
FAR struct max44009_dev_s *priv;
int use_count;
int ret;
DEBUGASSERT(filep);
inode = filep->f_inode;
DEBUGASSERT(inode && inode->i_private);
priv = (FAR struct max44009_dev_s *)inode->i_private;
ret = nxmutex_lock(&priv->dev_lock);
if (ret < 0)
{
return ret;
}
use_count = priv->cref - 1;
if (use_count == 0)
{
priv->config->irq_enable(priv->config, false);
/* Last user, do power off. */
priv->config->set_power(priv->config, false);
priv->cref = use_count;
}
else
{
DEBUGASSERT(use_count > 0);
priv->cref = use_count;
}
max44009_dbg("CLOSED\n");
nxmutex_unlock(&priv->dev_lock);
return OK;
}
static ssize_t max44009_read(FAR struct file *filep, FAR char *buffer,
size_t buflen)
{
FAR struct inode *inode;
FAR struct max44009_dev_s *priv;
ssize_t length = 0;
int ret;
struct max44009_data_s data;
DEBUGASSERT(filep);
inode = filep->f_inode;
DEBUGASSERT(inode && inode->i_private);
priv = (FAR struct max44009_dev_s *)inode->i_private;
ret = nxmutex_lock(&priv->dev_lock);
if (ret < 0)
{
return (ssize_t)ret;
}
ret = max44009_read_data(priv, &data);
if (ret < 0)
{
max44009_dbg("failed to read the sensor\n");
}
else
{
/* This interface is mainly intended for easy debugging in nsh. */
length = snprintf(buffer, buflen, "%u.%03hu", data.lux, data.mlux);
if (length > buflen)
{
length = buflen;
}
}
nxmutex_unlock(&priv->dev_lock);
return length;
}
static ssize_t max44009_write(FAR struct file *filep, FAR const char *buffer,
size_t buflen)
{
ssize_t length = 0;
return length;
}
static int max44009_set_interrupt_bit(FAR struct max44009_dev_s *priv,
bool is_activated)
{
int ret;
uint8_t cmd[2];
cmd[0] = MAX44009_INT_EN;
cmd[1] = is_activated ? (1 << 0) : 0;
ret = max44009_write_reg8(priv, cmd);
if (ret < 0)
{
max44009_dbg("Cannot set interrupt bit\n");
}
return ret;
}
static int max44009_set_manual_mode(FAR struct max44009_dev_s *priv,
bool is_manual)
{
int ret;
uint8_t value = 0;
const uint8_t manual_bit = (1 << 6);
uint8_t cmd[2];
cmd[0] = MAX44009_CONFIG;
ret = max44009_read_reg8(priv, &cmd[0], &value);
if (ret < 0)
{
max44009_dbg("Cannot read config register\n");
goto fail;
}
if (is_manual)
{
value |= manual_bit;
}
else
{
value &= ~manual_bit;
}
cmd[1] = value;
ret = max44009_write_reg8(priv, cmd);
if (ret < 0)
{
max44009_dbg("Cannot set manual bit in config register\n");
}
fail:
return ret;
}
static int max44009_set_continuous_mode(FAR struct max44009_dev_s *priv,
bool is_cont)
{
int ret;
uint8_t value = 0;
const uint8_t cont_bit = (1 << 7);
uint8_t cmd[2];
cmd[0] = MAX44009_CONFIG;
ret = max44009_read_reg8(priv, &cmd[0], &value);
if (ret < 0)
{
max44009_dbg("Cannot read config register\n");
goto fail;
}
if (is_cont)
{
value |= cont_bit;
}
else
{
value &= ~cont_bit;
}
cmd[1] = value;
ret = max44009_write_reg8(priv, cmd);
if (ret < 0)
{
max44009_dbg("Cannot set cont bit in config register\n");
}
fail:
return ret;
}
static int max44009_set_current_div_ratio(FAR struct max44009_dev_s *priv,
bool is_cdr)
{
int ret;
uint8_t value = 0;
const uint8_t cdr_bit = (1 << 3);
uint8_t cmd[2];
cmd[0] = MAX44009_CONFIG;
ret = max44009_read_reg8(priv, &cmd[0], &value);
if (ret < 0)
{
max44009_dbg("Cannot read config register\n");
goto fail;
}
if (is_cdr)
{
value |= cdr_bit;
}
else
{
value &= ~cdr_bit;
}
cmd[1] = value;
ret = max44009_write_reg8(priv, cmd);
if (ret < 0)
{
max44009_dbg("Cannot set cdr bit in config register\n");
}
fail:
return ret;
}
static int max44009_set_integration_time(FAR struct max44009_dev_s *priv,
enum max44009_integration_time_e
integration_time)
{
int ret;
uint8_t value = 0;
const uint8_t tim_bits = integration_time << 0;
const uint8_t tim_mask = 0x07;
uint8_t cmd[2];
cmd[0] = MAX44009_CONFIG;
ret = max44009_read_reg8(priv, &cmd[0], &value);
if (ret < 0)
{
max44009_dbg("Cannot read config register\n");
goto fail;
}
value &= ~tim_mask;
value |= tim_bits;
cmd[1] = value;
ret = max44009_write_reg8(priv, cmd);
if (ret < 0)
{
max44009_dbg("Cannot set tim bits in config register\n");
}
fail:
return ret;
}
static int max44009_set_threshold_timer(FAR struct max44009_dev_s *priv,
uint8_t threshold_timer)
{
int ret;
uint8_t cmd[2];
cmd[0] = MAX44009_THRESH_TIMER;
cmd[1] = threshold_timer;
ret = max44009_write_reg8(priv, cmd);
if (ret < 0)
{
max44009_dbg("Threshold timer cannot be set\n");
}
return ret;
}
static int max44009_set_threshold(FAR struct max44009_dev_s *priv,
FAR struct max44009_threshold_s *settings)
{
int ret;
uint8_t cmd[2];
cmd[0] = MAX44009_UP_THRESH_BYTE;
cmd[1] = settings->upper_threshold;
ret = max44009_write_reg8(priv, cmd);
if (ret < 0)
{
max44009_dbg("Cannot set upper threshold\n");
goto fail;
}
cmd[0] = MAX44009_LOW_THRESH_BYTE;
cmd[1] = settings->lower_threshold;
ret = max44009_write_reg8(priv, cmd);
if (ret < 0)
{
max44009_dbg("Cannot set lower threshold\n");
goto fail;
}
ret = max44009_set_threshold_timer(priv, settings->threshold_timer);
if (ret < 0)
{
max44009_dbg("Cannot set threshold timer\n");
goto fail;
}
ret = max44009_set_interrupt_bit(priv, true);
if (ret < 0)
{
max44009_dbg("Cannot set interrupt\n");
goto fail;
}
fail:
return ret;
}
static int max44009_selftest(FAR struct max44009_dev_s *priv,
FAR struct max44009_data_s * data)
{
int ret;
uint8_t reg_addr = MAX44009_THRESH_TIMER;
uint8_t value = 0;
ret = max44009_set_threshold_timer(priv, data->test_value);
if (ret < 0)
{
max44009_dbg("Cannot write test-value\n");
goto fail;
}
ret = max44009_read_reg8(priv, &reg_addr, &value);
if (ret < 0)
{
max44009_dbg("Cannot read written value\n");
goto fail;
}
if (value != data->test_value)
{
max44009_dbg("Test failed\n");
ret = -EIO;
}
fail:
return ret;
}
static int max44009_init_device(FAR struct max44009_dev_s *priv,
FAR struct max44009_init_s * settings)
{
int ret;
ret = max44009_set_manual_mode(priv, settings->is_manual);
if (ret < 0)
{
max44009_dbg("Cannot init manual mode\n");
goto fail;
}
ret = max44009_set_continuous_mode(priv, settings->is_cont);
if (ret < 0)
{
max44009_dbg("Cannot init cont mode\n");
goto fail;
}
if (settings->is_manual)
{
ret = max44009_set_current_div_ratio(priv, settings->is_cdr);
if (ret < 0)
{
max44009_dbg("Cannot init cdr mode\n");
goto fail;
}
ret = max44009_set_integration_time(priv, settings->integr_time);
if (ret < 0)
{
max44009_dbg("Cannot init tim mode\n");
goto fail;
}
}
fail:
return ret;
}
static int max44009_read_data(FAR struct max44009_dev_s *priv,
FAR struct max44009_data_s *data)
{
int ret;
uint8_t lvalue;
uint8_t hvalue;
uint8_t reg_addr;
uint32_t val;
reg_addr = MAX44009_INT_STS;
ret = max44009_read_reg8(priv, &reg_addr, &hvalue);
if (ret < 0)
{
max44009_dbg("Cannot read interrupt status register\n");
}
reg_addr = MAX44009_LUX_HBYTE;
ret = max44009_read_reg8(priv, &reg_addr, &hvalue);
if (ret < 0)
{
max44009_dbg("Cannot read high bits from lux register\n");
return ret;
}
/* LUX HBYTE has (starting with MSB): E3.E2.E1.E0.M7.M6.M5.M4
* LUX LBYTE has : --.--.--.--.M3.M2.M1.M0
*
* E[3..0] = Exponent, M[7..0]: Mantissa.
*
* Lux can be calculated as (full resolution):
* (M[7..0] << E[3..0]) * 0.045.
*
* Lux can also be calculated using only HBYTE:
* (M[7..4] << E[3..0]) * 0.72
* == (M[7..4] << E[3..0]) * 2^4 * 0.045
* == (M[7..4] << E[3..0]) * (1 << 4) * 0.045
* == (M[7..4] << (E[3..0] + 4)) * 0.045
*/
reg_addr = MAX44009_LUX_LBYTE;
ret = max44009_read_reg8(priv, &reg_addr, &lvalue);
if (ret < 0)
{
max44009_dbg("Cannot read low bits from lux register\n");
return ret;
}
/* Merge HBYTE and LBYTE to 16-bit integer:
* --.--.--.--.E3.E2.E1.E0.M7.M6.M5.M4.M3.M2.M1.M0
*/
data->raw_value = (hvalue << 4) | (lvalue & 0xf);
/* Add raw value to entropy pool. */
add_sensor_randomness(data->raw_value);
/* Convert raw value to lux and millilux. */
val = data->raw_value & 0xff;
val = val << ((data->raw_value & 0x0f00) >> 8);
/* lux is the raw output multiplied by 0.045. */
data->lux = (val * 45) / 1000;
data->mlux = (val * 45) % 1000;
return ret;
}
static int max44009_ioctl(FAR struct file *filep, int cmd, unsigned long arg)
{
FAR struct inode *inode;
FAR struct max44009_dev_s *priv;
int ret;
DEBUGASSERT(filep);
inode = filep->f_inode;
DEBUGASSERT(inode && inode->i_private);
priv = (FAR struct max44009_dev_s *)inode->i_private;
ret = nxmutex_lock(&priv->dev_lock);
if (ret < 0)
{
return ret;
}
switch (cmd)
{
case SNIOC_INIT:
ret = max44009_init_device(priv, (FAR struct max44009_init_s *)arg);
break;
case SNIOC_THRESHOLD:
ret = max44009_set_threshold(priv,
(FAR struct max44009_threshold_s *)arg);
break;
case SNIOC_READ_RAW_DATA:
case SNIOC_READ_CONVERT_DATA:
ret = max44009_read_data(priv, (FAR struct max44009_data_s *)arg);
break;
case SNIOC_START_SELFTEST:
ret = max44009_selftest(priv, (FAR struct max44009_data_s *)arg);
break;
default:
ret = -ENOTTY;
break;
}
nxmutex_unlock(&priv->dev_lock);
return ret;
}
static void max44009_notify(FAR struct max44009_dev_s *priv)
{
DEBUGASSERT(priv != NULL);
int i;
/* If there are threads waiting on poll() for data to become available,
* then wake them up now. NOTE: we wake up all waiting threads because we
* do not know that they are going to do. If they all try to read the
* data, then some make end up blocking after all.
*/
for (i = 0; i < CONFIG_MAX44009_NPOLLWAITERS; i++)
{
FAR struct pollfd *fds = priv->fds[i];
if (fds)
{
poll_notify(&fds, 1, POLLIN);
priv->int_pending = false;
}
}
}
static int max44009_poll(FAR struct file *filep, FAR struct pollfd *fds,
bool setup)
{
FAR struct inode *inode;
FAR struct max44009_dev_s *priv;
int ret = OK;
int i;
DEBUGASSERT(filep && fds);
inode = filep->f_inode;
DEBUGASSERT(inode && inode->i_private);
priv = (FAR struct max44009_dev_s *)inode->i_private;
ret = nxmutex_lock(&priv->dev_lock);
if (ret < 0)
{
return ret;
}
if (setup)
{
/* Ignore waits that do not include POLLIN */
if ((fds->events & POLLIN) == 0)
{
ret = -EDEADLK;
goto out;
}
/* This is a request to set up the poll. Find an available slot for
* the poll structure reference.
*/
for (i = 0; i < CONFIG_MAX44009_NPOLLWAITERS; i++)
{
/* Find an available slot */
if (!priv->fds[i])
{
/* Bind the poll structure and this slot */
priv->fds[i] = fds;
fds->priv = &priv->fds[i];
break;
}
}
if (i >= CONFIG_MAX44009_NPOLLWAITERS)
{
fds->priv = NULL;
ret = -EBUSY;
goto out;
}
if (priv->int_pending)
{
max44009_notify(priv);
}
}
else if (fds->priv)
{
/* This is a request to tear down the poll. */
struct pollfd **slot = (struct pollfd **)fds->priv;
DEBUGASSERT(slot != NULL);
/* Remove all memory of the poll setup */
*slot = NULL;
fds->priv = NULL;
}
out:
nxmutex_unlock(&priv->dev_lock);
return ret;
}
static int max44009_int_handler(int irq, FAR void *context, FAR void *arg)
{
FAR struct max44009_dev_s *priv = (FAR struct max44009_dev_s *)arg;
irqstate_t flags;
DEBUGASSERT(priv != NULL);
flags = enter_critical_section();
priv->int_pending = true;
leave_critical_section(flags);
max44009_notify(priv);
max44009_dbg("MAX44009 interrupt\n");
return OK;
}
/****************************************************************************
* Public Functions
****************************************************************************/
int max44009_register(FAR const char *devpath, FAR struct i2c_master_s *i2c,
uint8_t addr, FAR struct max44009_config_s *config)
{
struct max44009_dev_s *priv;
int ret;
priv = kmm_zalloc(sizeof(struct max44009_dev_s));
if (!priv)
{
max44009_dbg("Memory cannot be allocated for ALS sensor\n");
return -ENOMEM;
}
priv->addr = addr;
priv->i2c = i2c;
priv->config = config;
nxmutex_init(&priv->dev_lock);
ret = register_driver(devpath, &g_alsops, 0666, priv);
max44009_dbg("Registered with %d\n", ret);
if (ret < 0)
{
kmm_free(priv);
max44009_dbg("Error occurred during the driver registering\n");
return ret;
}
priv->config->irq_attach(priv->config, max44009_int_handler, priv);
priv->config->irq_enable(priv->config, false);
return ret;
}