nuttx/configs/clicker2-stm32/Kconfig

#
# For a description of the syntax of this configuration file,
# see the file kconfig-language.txt in the NuttX tools repository.
#

if ARCH_BOARD_CLICKER2_STM32

config CLICKER2_STM32_MB1_SPI
    bool "mikroBUS1 SPI"
    default n
    select STM32_SPI3
    ---help---
        Enable SPI support on mikroBUS1 (STM32 SPI3)

config CLICKER2_STM32_MB2_SPI
    bool "mikroBUS2 SPI"
    default n
    select STM32_SPI2
    ---help---
        Enable SPI support on mikroBUS1 (STM32 SPI2)

config CLICKER2_STM32_MB1_BEE
    bool "mikroBUS1 MRF24J40 BEE"
    default y
    depends on IEEE802154_MRF24J40
    select CLICKER2_STM32_MB1_SPI
    ---help---
        Enable support for MRF24J40 BEE on mikroBUS1

config CLICKER2_STM32_MB2_BEE
    bool "mikroBUS2 MRF24J40 BEE"
    default n
    depends on IEEE802154_MRF24J40
    select CLICKER2_STM32_MB2_SPI
    ---help---
        Enable support for MRF24J40 BEE on mikroBUS2

config CLICKER2_STM32_MRF24J40LH_VERBOSE
    bool "Verbose MRF24J40 lowerhalf"
    default n
    depends on IEEE802154_MRF24J40 && DEBUG_WIRELESS_INFO
    ---help---
        Enable verbose syslog for MRF24J40 lowerhalf

config CLICKER2_STM32_MB1_XBEE
    bool "mikroBUS1 XBee radio"
    default n
    depends on IEEE802154_XBEE
    select CLICKER2_STM32_MB1_SPI
    ---help---
        Enable support for XBee radio on mikroBUS1

config CLICKER2_STM32_MB2_XBEE
    bool "mikroBUS2 XBee radio"
    default n
    depends on IEEE802154_XBEE
    select CLICKER2_STM32_MB2_SPI
    ---help---
        Enable support for XBee on mikroBUS2

config CLICKER2_STM32_XBEELH_VERBOSE
    bool "Verbose XBee lowerhalf"
    default n
    depends on IEEE802154_XBEE && DEBUG_WIRELESS_INFO
    ---help---
        Enable verbose syslog for XBee lowerhalf

config CLICKER2_STM32_MB1_MMCSD
    bool "mikroBUS1 uSD Card Click board"
    default n
    select CLICKER2_STM32_MB1_SPI
    ---help---
        Enable support for uSD click on mikroBUS1

config CLICKER2_STM32_MB2_MMCSD
    bool "mikroBUS2 uSD Card Click board"
    default n
    select CLICKER2_STM32_MB2_SPI
    ---help---
        Enable support for uSD click on mikroBUS2

if FS_AUTOMOUNTER
if CLICKER2_STM32_MB1_MMCSD

config CLICKER2_STM32_MB1_MMCSD_AUTOMOUNT
    bool "MB1 MMCSD automounter"
    default n

if CLICKER2_STM32_MB1_MMCSD_AUTOMOUNT

config CLICKER2_STM32_MB1_MMCSD_AUTOMOUNT_FSTYPE
    string "MB1 MMCSD file system type"
    default "vfat"

config CLICKER2_STM32_MB1_MMCSD_AUTOMOUNT_BLKDEV
    string "MB1 MMCSD block device"
    default "/dev/mmcsd0"

config CLICKER2_STM32_MB1_MMCSD_AUTOMOUNT_MOUNTPOINT
    string "MB1 MMCSD mount point"
    default "/mnt/sdcard0"

config CLICKER2_STM32_MB1_MMCSD_AUTOMOUNT_DDELAY
    int "MB1 MMCSD debounce delay (milliseconds)"
    default 1000

config CLICKER2_STM32_MB1_MMCSD_AUTOMOUNT_UDELAY
    int "MB1 MMCSD unmount retry delay (milliseconds)"
    default 2000

endif # CLICKER2_STM32_MB1_MMCSD_AUTOMOUNT
endif # CLICKER2_STM32_MB1_MMCSD

if CLICKER2_STM32_MB2_MMCSD

config CLICKER2_STM32_MB2_MMCSD_AUTOMOUNT
    bool "MB2 MMCSD automounter"
    default n

if CLICKER2_STM32_MB2_MMCSD_AUTOMOUNT

config CLICKER2_STM32_MB2_MMCSD_AUTOMOUNT_FSTYPE
    string "MB2 MMCSD file system type"
    default "vfat"

config CLICKER2_STM32_MB2_MMCSD_AUTOMOUNT_BLKDEV
    string "MB2 MMCSD block device"
    default "/dev/mmcsd0"

config CLICKER2_STM32_MB2_MMCSD_AUTOMOUNT_MOUNTPOINT
    string "MB2 MMCSD mount point"
    default "/mnt/sdcard0"

config CLICKER2_STM32_MB2_MMCSD_AUTOMOUNT_DDELAY
    int "MB2 MMCSD debounce delay (milliseconds)"
    default 1000

config CLICKER2_STM32_MB2_MMCSD_AUTOMOUNT_UDELAY
    int "MB2 MMCSD unmount retry delay (milliseconds)"
    default 2000

endif # CLICKER2_STM32_MB2_MMCSD_AUTOMOUNT
endif # CLICKER2_STM32_MB2_MMCSD

endif # FS_AUTOMOUNTER

config CLICKER2_STM32_SYSLOG_FILE
    bool "Enable file syslog"
    default n
    depends on SYSLOG_FILE

if CLICKER2_STM32_SYSLOG_FILE

config CLICKER2_STM32_SYSLOG_FILE_PATH
    string "Path to syslog file"
    default "/mnt/sdcard0/nuttx.log"

config CLICKER2_STM32_SYSLOG_FILE_DELAY
    int "Delay time(ms) for syslog file"
    default 2500
    ---help---
        If the file used for syslog is on an SD card, the device may need time
        to finish mounting the file system. This option selects the amount of
        time in milliseconds for the system to wait before attempting to setup
        the syslog file

endif # CLICKER2_STM32_SYSLOG_FILE

endif # ARCH_BOARD_CLICKER2_STM32