nuttx/boards/arm/samv7/samv71-xult/src/Makefile

129 lines
3.3 KiB
Makefile
Raw Normal View History

############################################################################
# boards/arm/samv7/samv71-xult/src/Makefile
#
# Copyright (C) 2015-2017 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
############################################################################
include $(TOPDIR)/Make.defs
CSRCS = sam_boot.c
ifeq ($(CONFIG_SAMV7_SDRAMC),y)
CSRCS += sam_sdram.c
endif
ifeq ($(CONFIG_LIB_BOARDCTL),y)
CSRCS += sam_appinit.c sam_bringup.c
ifeq ($(CONFIG_BOARDCTL_RESET),y)
CSRCS += sam_reset.c
endif
else ifeq ($(CONFIG_BOARD_LATE_INITIALIZE),y)
CSRCS += sam_bringup.c
endif
ifeq ($(CONFIG_ARCH_LEDS),y)
CSRCS += sam_autoleds.c
else
CSRCS += sam_userleds.c
endif
ifeq ($(CONFIG_ARCH_BUTTONS),y)
CSRCS += sam_buttons.c
endif
ifeq ($(CONFIG_SAMV7_HSMCI0),y)
CSRCS += sam_hsmci.c
endif
ifeq ($(CONFIG_FS_AUTOMOUNTER),y)
CSRCS += sam_automount.c
endif
ifeq ($(CONFIG_SAMV7_EMAC),y)
CSRCS += sam_ethernet.c
endif
ifeq ($(CONFIG_SAMV7_USBDEVHS),y)
CSRCS += sam_usbdev.c
endif
ifeq ($(CONFIG_SAMV7_SPI),y)
CSRCS += sam_spi.c
endif
ifeq ($(CONFIG_USBMSC),y)
CSRCS += sam_usbmsc.c
endif
ifeq ($(CONFIG_USBDEV_COMPOSITE),y)
CSRCS += sam_composite.c
endif
ifeq ($(CONFIG_SAMV7_MCAN),y)
CSRCS += sam_mcan.c
endif
ifeq ($(CONFIG_AUDIO_WM8904),y)
2015-04-03 02:24:55 +02:00
ifeq ($(CONFIG_SAMV7_TWIHS0),y)
ifeq ($(CONFIG_SAMV7_SSC0),y)
CSRCS += sam_wm8904.c
endif
endif
endif
ifeq ($(CONFIG_AUDIO_NULL),y)
CSRCS += sam_audio_null.c
endif
ifeq ($(CONFIG_MTD_CONFIG),y)
ifeq ($(CONFIG_SAMV7_TWIHS0),y)
ifeq ($(CONFIG_MTD_AT24XX),y)
CSRCS += sam_at24config.c
endif
endif
endif
ifeq ($(CONFIG_SAMV71XULT_MXTXPLND),y)
ifeq ($(CONFIG_LCD),y)
CSRCS += sam_ili9488.c
endif
ifeq ($(CONFIG_INPUT_MXT),y)
2015-05-12 17:47:37 +02:00
CSRCS += sam_maxtouch.c sam_atmxtconfig.c
endif
endif
ifeq ($(CONFIG_IEEE802154_MRF24J40),y)
CSRCS += sam_mrf24j40.c
endif
Merged in alinjerpelea/nuttx (pull request #963) Move boards to boards folder * boards: rename configs folder to boards This is the proposed layout after the change: boards: - folder containing board folders <board>: - name of each board drivers: - extra drivers specific for platform include: - header files for the boars scripts: - extra scripts specific for platform src: - board specific code tools: - extra tools specific for platform <config>: - board specific configuration(s) Note: <xxx> names are dependent on platform This is a logical change to aim to the arch layout but this is a huge change it should be done in several steps to lower the risk. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * Kconfig: replace configs with boards The change is needed after the path change Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * Makefile: replace configs with boards The change is needed after the path change Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * Makefile.*: replace configs with boards The change is needed after the path change Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * Make.defs: replace configs with boards The change is needed after the path change Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * .sh: replace configs with boards The change is needed after the path change Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * .mk: replace configs with boards The change is needed after the path change Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * .c & .h: replace configs with boards The change is needed after the path change Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * .bat: replace configs with boards The change is needed after the path change Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-08-05 14:04:14 +02:00
include $(TOPDIR)/boards/Board.mk