sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
f3576a41f5
nuttx/boards/arm64/a64/pinephone/configs/nsh/defconfig

67 lines
1.7 KiB
Plaintext
Raw Normal View History

arch/arm64: Add support for PINE64 PinePhone This PR adds support for PINE64 PinePhone and the Allwinner A64 SoC (based on Arm Cortex-A53). With this PR, PinePhone boots successfully to nsh (via microSD Card) and runs console apps. - `arch/arm64/Kconfig`: Added Allwinner A64 SoC - `boards/Kconfig`: Added PINE64 PinePhone - `arch/arm64/src/a64/Kconfig`: New Kconfig for Allwinner A64 SoC - `boards/arm64/a64/pinephone/Kconfig`: New Kconfig for PINE64 PinePhone - `src/a64/a64_boot.c`, `a64_boot.h`: Boot functions for Allwinner A64 - `src/a64/a64_lowputc.S`: Low-level console output - `src/a64/a64_serial.c`, `a64_serial.h`: A64 Serial Driver - `src/a64/chip.h`: A64 SoC Definitions - `include/a64/chip.h`: A64 Memory Map, Generic Interrupt Controller - `include/a64/irq.h`: A64 Interrupts - `src/a64/Make.defs`: Source files for A64 - `configs/nsh/defconfig`: Board Configuration for `pinephone:nsh` - `src/pinephone_appinit.c`: Init PinePhone - `src/pinephone_boardinit.c`: Init PinePhone - `src/pinephone_bringup.c`: Start PinePhone Drivers - `src/pinephone.h`: PinePhone Declarations - `include/board_memorymap.h`: PinePhone Memory Map - `scripts/dramboot.ld`: PinePhone Linker Script - `scripts/Make.defs`: Source files for PinePhone - `src/Makefile`: PinePhone Makefile - `platforms/arm/a64/boards/pinephone/index.rst`: Building and booting NuttX on PinePhone - `platforms/arm/a64/index.rst`: Overview of Allwinner A64 - `introduction/supported_platforms.rst`: Added Allwinner A64 - `introduction/detailed_support.rst`: Added Allwinner A64
2022-11-22 00:32:45 +01:00
#
# This file is autogenerated: PLEASE DO NOT EDIT IT.
#
# You can use "make menuconfig" to make any modifications to the installed .config file.
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
# modifications.
#
CONFIG_A64_UART=y
CONFIG_ARCH="arm64"
CONFIG_ARCH_ARM64=y
CONFIG_ARCH_BOARD="pinephone"
CONFIG_ARCH_BOARD_PINEPHONE=y
CONFIG_ARCH_CHIP="a64"
CONFIG_ARCH_CHIP_A64=y
CONFIG_ARCH_INTERRUPTSTACK=4096
boards/pinephone: add support of reboot command
2022-12-07 04:46:55 +01:00
CONFIG_BOARDCTL_RESET=y
arm64/a64: Add driver for Reduced Serial Bus This PR adds the driver for Reduced Serial Bus (RSB) on Allwinner A64 SoC. The RSB Driver will be called by the upcoming Power Mgmt IC Driver for PINE64 PinePhone, to power on the LCD Display. `arch/arm64/src/a64/Kconfig`: Added the Kconfig option for "A64 Peripheral Selection > RSB" (`CONFIG_A64_RSB`), which enables the RSB Driver `arch/arm64/src/a64/hardware/a64_memorymap.h`: Added the Base Address for RSB `arch/arm64/src/a64/Make.defs`: Added the RSB Driver to the Makefile `arch/arm64/src/a64/a64_de.c`: Increase PLL Timeout for Allwinner A64 Display Engine `boards/arm64/a64/pinephone/configs/nsh/defconfig`: Set PinePhone Board Config `CONFIG_BOARD_LOOPSPERMSEC` to the value computed by `calib_udelay` `arch/arm64/src/a64/a64_rsb.c`, `a64_rsb.h`: RSB Driver for Allwinner A64 `platforms/arm/a64/boards/pinephone/index.rst`: Added RSB as supported peripheral for PinePhone
2022-12-21 14:56:30 +01:00
CONFIG_BOARD_LOOPSPERMSEC=116524
arch/arm64: Add support for PINE64 PinePhone This PR adds support for PINE64 PinePhone and the Allwinner A64 SoC (based on Arm Cortex-A53). With this PR, PinePhone boots successfully to nsh (via microSD Card) and runs console apps. - `arch/arm64/Kconfig`: Added Allwinner A64 SoC - `boards/Kconfig`: Added PINE64 PinePhone - `arch/arm64/src/a64/Kconfig`: New Kconfig for Allwinner A64 SoC - `boards/arm64/a64/pinephone/Kconfig`: New Kconfig for PINE64 PinePhone - `src/a64/a64_boot.c`, `a64_boot.h`: Boot functions for Allwinner A64 - `src/a64/a64_lowputc.S`: Low-level console output - `src/a64/a64_serial.c`, `a64_serial.h`: A64 Serial Driver - `src/a64/chip.h`: A64 SoC Definitions - `include/a64/chip.h`: A64 Memory Map, Generic Interrupt Controller - `include/a64/irq.h`: A64 Interrupts - `src/a64/Make.defs`: Source files for A64 - `configs/nsh/defconfig`: Board Configuration for `pinephone:nsh` - `src/pinephone_appinit.c`: Init PinePhone - `src/pinephone_boardinit.c`: Init PinePhone - `src/pinephone_bringup.c`: Start PinePhone Drivers - `src/pinephone.h`: PinePhone Declarations - `include/board_memorymap.h`: PinePhone Memory Map - `scripts/dramboot.ld`: PinePhone Linker Script - `scripts/Make.defs`: Source files for PinePhone - `src/Makefile`: PinePhone Makefile - `platforms/arm/a64/boards/pinephone/index.rst`: Building and booting NuttX on PinePhone - `platforms/arm/a64/index.rst`: Overview of Allwinner A64 - `introduction/supported_platforms.rst`: Added Allwinner A64 - `introduction/detailed_support.rst`: Added Allwinner A64
2022-11-22 00:32:45 +01:00
CONFIG_BUILTIN=y
CONFIG_DEBUG_ASSERTIONS=y
CONFIG_DEBUG_FEATURES=y
CONFIG_DEBUG_FULLOPT=y
CONFIG_DEBUG_SCHED=y
CONFIG_DEBUG_SCHED_ERROR=y
CONFIG_DEBUG_SCHED_WARN=y
CONFIG_DEBUG_SYMBOLS=y
CONFIG_DEFAULT_TASK_STACKSIZE=8192
CONFIG_DEV_ZERO=y
CONFIG_EXAMPLES_HELLO=y
arm64/a64: Add drivers for PIO and LEDs This PR adds the drivers for Allwinner A64 PIO (Programmable I/O) and PinePhone LEDs (Red / Green / Blue). The PIO Driver is based on the NuttX PIO Driver for Allwinner A10: [`arch/arm/src/a1x/a1x_pio.c`](https://github.com/apache/nuttx/blob/master/arch/arm/src/a1x/a1x_pio.c) - `arch/arm64/src/a64/Make.defs`: Add PIO Driver to Makefile - `boards/Kconfig`: Add `ARCH_HAVE_LEDS` to PinePhone - `boards/arm64/a64/pinephone/src/pinephone.h`: Define PinePhone LEDs - `boards/arm64/a64/pinephone/src/pinephone_boardinit.c`: Start Auto LEDs - `boards/arm64/a64/pinephone/src/pinephone_bringup.c`: Start User LEDs - `boards/arm64/a64/pinephone/src/Makefile`: Add LED Driver to Makefile - `boards/arm64/a64/pinephone/configs/nsh/defconfig`: Add `CONFIG_USERLED` to `nsh` config - `arch/arm64/src/a64/a64_pio.c`, `a64_pio.h`: Allwinner A64 PIO Driver - `arch/arm64/src/a64/hardware/a64_memorymap.h`: PIO Memory Map - `arch/arm64/src/a64/hardware/a64_pio.h`: PIO Definitions - `boards/arm64/a64/pinephone/include/board.h`: Define PinePhone LEDs - `boards/arm64/a64/pinephone/src/pinephone_autoleds.c`: Driver for Auto LEDs - `boards/arm64/a64/pinephone/src/pinephone_userleds.c`: Driver for User LEDs - `introduction/supported_platforms.rst`: Add Allwinner A64 as Supported Platform - `platforms/arm/a64/boards/pinephone/index.rst`: Add PIO and LEDs to PinePhone
2022-12-06 04:43:26 +01:00
CONFIG_EXAMPLES_LEDS=y
arch/arm64: Add support for PINE64 PinePhone This PR adds support for PINE64 PinePhone and the Allwinner A64 SoC (based on Arm Cortex-A53). With this PR, PinePhone boots successfully to nsh (via microSD Card) and runs console apps. - `arch/arm64/Kconfig`: Added Allwinner A64 SoC - `boards/Kconfig`: Added PINE64 PinePhone - `arch/arm64/src/a64/Kconfig`: New Kconfig for Allwinner A64 SoC - `boards/arm64/a64/pinephone/Kconfig`: New Kconfig for PINE64 PinePhone - `src/a64/a64_boot.c`, `a64_boot.h`: Boot functions for Allwinner A64 - `src/a64/a64_lowputc.S`: Low-level console output - `src/a64/a64_serial.c`, `a64_serial.h`: A64 Serial Driver - `src/a64/chip.h`: A64 SoC Definitions - `include/a64/chip.h`: A64 Memory Map, Generic Interrupt Controller - `include/a64/irq.h`: A64 Interrupts - `src/a64/Make.defs`: Source files for A64 - `configs/nsh/defconfig`: Board Configuration for `pinephone:nsh` - `src/pinephone_appinit.c`: Init PinePhone - `src/pinephone_boardinit.c`: Init PinePhone - `src/pinephone_bringup.c`: Start PinePhone Drivers - `src/pinephone.h`: PinePhone Declarations - `include/board_memorymap.h`: PinePhone Memory Map - `scripts/dramboot.ld`: PinePhone Linker Script - `scripts/Make.defs`: Source files for PinePhone - `src/Makefile`: PinePhone Makefile - `platforms/arm/a64/boards/pinephone/index.rst`: Building and booting NuttX on PinePhone - `platforms/arm/a64/index.rst`: Overview of Allwinner A64 - `introduction/supported_platforms.rst`: Added Allwinner A64 - `introduction/detailed_support.rst`: Added Allwinner A64
2022-11-22 00:32:45 +01:00
CONFIG_EXPERIMENTAL=y
CONFIG_FS_PROCFS=y
CONFIG_FS_ROMFS=y
CONFIG_HAVE_CXX=y
CONFIG_HAVE_CXXINITIALIZE=y
CONFIG_IDLETHREAD_STACKSIZE=8192
CONFIG_INIT_ENTRYPOINT="nsh_main"
CONFIG_INTELHEX_BINARY=y
CONFIG_NSH_ARCHINIT=y
CONFIG_NSH_BUILTIN_APPS=y
CONFIG_NSH_FILEIOSIZE=512
CONFIG_NSH_READLINE=y
CONFIG_NSH_ROMFSETC=y
CONFIG_PREALLOC_TIMERS=4
CONFIG_PTHREAD_STACK_MIN=8192
CONFIG_RAMLOG=y
CONFIG_RAM_SIZE=134217728
CONFIG_RAM_START=0x40000000
CONFIG_RAW_BINARY=y
CONFIG_READLINE_CMD_HISTORY=y
CONFIG_RR_INTERVAL=200
CONFIG_SCHED_HPWORK=y
CONFIG_SCHED_HPWORKPRIORITY=192
CONFIG_SPINLOCK=y
CONFIG_STACK_COLORATION=y
CONFIG_START_MONTH=11
CONFIG_START_YEAR=2022
CONFIG_SYMTAB_ORDEREDBYNAME=y
CONFIG_SYSTEM_NSH=y
CONFIG_SYSTEM_SYSTEM=y
arm64: add 64-bit time for all arm64 platform Summary For ARM64 architecture, the arch timer is 64-bit, the CONFIG_SYSTEM_TIME64 need to be enabled just like x86_64 and risc-v 64 Signed-off-by: qinwei1 <qinwei1@xiaomi.com>
2023-02-28 10:30:13 +01:00
CONFIG_SYSTEM_TIME64=y
arch/arm64: Add support for PINE64 PinePhone This PR adds support for PINE64 PinePhone and the Allwinner A64 SoC (based on Arm Cortex-A53). With this PR, PinePhone boots successfully to nsh (via microSD Card) and runs console apps. - `arch/arm64/Kconfig`: Added Allwinner A64 SoC - `boards/Kconfig`: Added PINE64 PinePhone - `arch/arm64/src/a64/Kconfig`: New Kconfig for Allwinner A64 SoC - `boards/arm64/a64/pinephone/Kconfig`: New Kconfig for PINE64 PinePhone - `src/a64/a64_boot.c`, `a64_boot.h`: Boot functions for Allwinner A64 - `src/a64/a64_lowputc.S`: Low-level console output - `src/a64/a64_serial.c`, `a64_serial.h`: A64 Serial Driver - `src/a64/chip.h`: A64 SoC Definitions - `include/a64/chip.h`: A64 Memory Map, Generic Interrupt Controller - `include/a64/irq.h`: A64 Interrupts - `src/a64/Make.defs`: Source files for A64 - `configs/nsh/defconfig`: Board Configuration for `pinephone:nsh` - `src/pinephone_appinit.c`: Init PinePhone - `src/pinephone_boardinit.c`: Init PinePhone - `src/pinephone_bringup.c`: Start PinePhone Drivers - `src/pinephone.h`: PinePhone Declarations - `include/board_memorymap.h`: PinePhone Memory Map - `scripts/dramboot.ld`: PinePhone Linker Script - `scripts/Make.defs`: Source files for PinePhone - `src/Makefile`: PinePhone Makefile - `platforms/arm/a64/boards/pinephone/index.rst`: Building and booting NuttX on PinePhone - `platforms/arm/a64/index.rst`: Overview of Allwinner A64 - `introduction/supported_platforms.rst`: Added Allwinner A64 - `introduction/detailed_support.rst`: Added Allwinner A64
2022-11-22 00:32:45 +01:00
CONFIG_TESTING_GETPRIME=y
CONFIG_TESTING_OSTEST=y
arm64/a64: Add support for Multiple UART Ports Currently only Port UART0 is supported for Allwinner A64. This PR adds support for all UART Ports: UART1 to UART4. (Except R-UART, which is a special low-power UART) This is required for the upcoming LTE Modem Driver (Quectel EG25-G) for PINE64 PinePhone, which uses UART3. [(Details here)](https://lupyuen.github.io/articles/lte2) The code was adapted from the NuttX UART Driver for Allwinner A1X: [`a1x_serial.c`](https://github.com/apache/nuttx/blob/master/arch/arm/src/a1x/a1x_serial.c) `arch/arm64/src/a64/a64_serial.c`: Added ports UART1 to UART4, based on [`a1x_serial.c`](https://github.com/apache/nuttx/blob/master/arch/arm/src/a1x/a1x_serial.c) `arch/arm64/src/a64/a64_serial.h`: Added IRQs for UART1 to UART4. Moved UART Base Addresses to `a64_memorymap.h` `arch/arm64/src/a64/hardware/a64_memorymap.h`: Added UART Base Addresses for UART0 to UART4 `arch/arm64/src/a64/Kconfig`: Added UART1 to UART4 to Allwinner A64 Peripheral Selection menu `boards/arm64/a64/pinephone/configs/lcd/defconfig`, `lvgl/defconfig`, `nsh/defconfig`, `sensor/defconfig`: Fixed `UART1_SERIAL_CONSOLE` to `UART0_SERIAL_CONSOLE`
2023-05-10 01:43:25 +02:00
CONFIG_UART0_SERIAL_CONSOLE=y
arch/arm64: Add support for PINE64 PinePhone This PR adds support for PINE64 PinePhone and the Allwinner A64 SoC (based on Arm Cortex-A53). With this PR, PinePhone boots successfully to nsh (via microSD Card) and runs console apps. - `arch/arm64/Kconfig`: Added Allwinner A64 SoC - `boards/Kconfig`: Added PINE64 PinePhone - `arch/arm64/src/a64/Kconfig`: New Kconfig for Allwinner A64 SoC - `boards/arm64/a64/pinephone/Kconfig`: New Kconfig for PINE64 PinePhone - `src/a64/a64_boot.c`, `a64_boot.h`: Boot functions for Allwinner A64 - `src/a64/a64_lowputc.S`: Low-level console output - `src/a64/a64_serial.c`, `a64_serial.h`: A64 Serial Driver - `src/a64/chip.h`: A64 SoC Definitions - `include/a64/chip.h`: A64 Memory Map, Generic Interrupt Controller - `include/a64/irq.h`: A64 Interrupts - `src/a64/Make.defs`: Source files for A64 - `configs/nsh/defconfig`: Board Configuration for `pinephone:nsh` - `src/pinephone_appinit.c`: Init PinePhone - `src/pinephone_boardinit.c`: Init PinePhone - `src/pinephone_bringup.c`: Start PinePhone Drivers - `src/pinephone.h`: PinePhone Declarations - `include/board_memorymap.h`: PinePhone Memory Map - `scripts/dramboot.ld`: PinePhone Linker Script - `scripts/Make.defs`: Source files for PinePhone - `src/Makefile`: PinePhone Makefile - `platforms/arm/a64/boards/pinephone/index.rst`: Building and booting NuttX on PinePhone - `platforms/arm/a64/index.rst`: Overview of Allwinner A64 - `introduction/supported_platforms.rst`: Added Allwinner A64 - `introduction/detailed_support.rst`: Added Allwinner A64
2022-11-22 00:32:45 +01:00
CONFIG_USEC_PER_TICK=1000
arm64/a64: Add drivers for PIO and LEDs This PR adds the drivers for Allwinner A64 PIO (Programmable I/O) and PinePhone LEDs (Red / Green / Blue). The PIO Driver is based on the NuttX PIO Driver for Allwinner A10: [`arch/arm/src/a1x/a1x_pio.c`](https://github.com/apache/nuttx/blob/master/arch/arm/src/a1x/a1x_pio.c) - `arch/arm64/src/a64/Make.defs`: Add PIO Driver to Makefile - `boards/Kconfig`: Add `ARCH_HAVE_LEDS` to PinePhone - `boards/arm64/a64/pinephone/src/pinephone.h`: Define PinePhone LEDs - `boards/arm64/a64/pinephone/src/pinephone_boardinit.c`: Start Auto LEDs - `boards/arm64/a64/pinephone/src/pinephone_bringup.c`: Start User LEDs - `boards/arm64/a64/pinephone/src/Makefile`: Add LED Driver to Makefile - `boards/arm64/a64/pinephone/configs/nsh/defconfig`: Add `CONFIG_USERLED` to `nsh` config - `arch/arm64/src/a64/a64_pio.c`, `a64_pio.h`: Allwinner A64 PIO Driver - `arch/arm64/src/a64/hardware/a64_memorymap.h`: PIO Memory Map - `arch/arm64/src/a64/hardware/a64_pio.h`: PIO Definitions - `boards/arm64/a64/pinephone/include/board.h`: Define PinePhone LEDs - `boards/arm64/a64/pinephone/src/pinephone_autoleds.c`: Driver for Auto LEDs - `boards/arm64/a64/pinephone/src/pinephone_userleds.c`: Driver for User LEDs - `introduction/supported_platforms.rst`: Add Allwinner A64 as Supported Platform - `platforms/arm/a64/boards/pinephone/index.rst`: Add PIO and LEDs to PinePhone
2022-12-06 04:43:26 +01:00
CONFIG_USERLED=y
CONFIG_USERLED_LOWER=y
Reference in New Issue Copy Permalink