2007-02-18 00:21:28 +01:00
< html >
< head >
2007-02-28 02:16:49 +01:00
< title > NuttX Porting Manual< / title >
2007-02-18 00:21:28 +01:00
< meta name = "author" content = "Gregory Nutt" >
< / head >
2007-02-28 02:16:49 +01:00
< body background = "backgd.gif" >
2008-02-11 14:57:08 +01:00
< hr > < hr >
2007-02-22 02:50:30 +01:00
< center > < h1 > < i > Under Construction< / i > < / h1 > < / center >
2008-02-11 14:57:08 +01:00
< hr > < hr >
2007-02-18 00:21:28 +01:00
< center >
2008-02-11 14:57:08 +01:00
< h1 > < big > < b >
< p > NuttX Operating System< / br >
Porting Guide< / p >
< / b > < / big > < / h1 >
2007-02-18 00:21:28 +01:00
< p > < small > by< / small > < / p >
< p > Gregory Nutt< / p >
2008-12-05 15:04:37 +01:00
< p > < small > Last Update: December 5, 2008< / small > < / p >
2007-02-18 00:21:28 +01:00
< / center >
< center > < h1 > Table of Contents< / h1 > < / center >
2007-05-20 17:31:02 +02:00
< li > < a href = "#Introduction" > 1.0 Introduction< / a > < / li >
< li > < a href = "#DirectoryStructure" > 2.0 Directory Structure< / a > < / li >
2007-02-18 00:21:28 +01:00
< ul >
2007-05-20 17:31:02 +02:00
< li > < a href = "#DirStructDocumentation" > 2.1 Documentation< / a > < / li >
< l1 > < a href = "#DirStructArch" > 2.2 arch/< / a > < / li >
2007-03-19 23:45:58 +01:00
< ul >
2007-03-23 03:25:54 +01:00
< li > < a href = "#archdirectorystructure" > 2.2.1 Subdirectory Structure< / a > < / li >
< li > < a href = "#summaryofarchfiles" > 2.2.2 Summary of Files< / a > < / li >
2007-03-19 23:45:58 +01:00
< li > < a href = "#supportedarchitectures" > 2.2.3 Supported Architectures< / a > < / li >
< / ul >
2007-05-20 17:31:02 +02:00
< li > < a href = "#DirStructConfigs" > 2.3 configs/< / a > < / li >
2007-03-23 03:25:54 +01:00
< ul >
< li > < a href = "#configsdirectorystructure" > 2.3.1 Subdirectory Structure< / a > < / li >
< li > < a href = "#summaryofconfigfiles" > 2.3.2 Summary of Files< / a > < / li >
2007-03-27 23:27:41 +02:00
< ul >
< li > < a href = "#boardlogic" > 2.3.2.1 Board Specific Logic< / a > < / li >
2008-02-07 15:41:11 +01:00
< li > < a href = "#boardconfigsubdirs" > 2.3.2.2 Board Specific Configuration Sub-Directories< / a > < / li >
2007-03-27 23:27:41 +02:00
< / ul >
2007-03-23 03:25:54 +01:00
< li > < a href = "#supportedboards" > 2.3.3 Supported Boards< / a > < / li >
< / ul >
2007-05-20 17:31:02 +02:00
< li > < a href = "#DirStructDrivers" > 2.4 drivers/< / a > < / li >
< li > < a href = "#DirStructExamples" > 2.5 examples/< / a > < / li >
< li > < a href = "#DirStructFs" > 2.6 fs/< / a > < / li >
2008-11-26 16:46:12 +01:00
< li > < a href = "#DirStructGraphics" > 2.7 graphics/< / a > < / li >
< li > < a href = "#DirStructInclude" > 2.8 include/< / a > < / li >
< li > < a href = "#DirStructLib" > 2.9 lib/< / a > < / li >
< li > < a href = "#DirStructMm" > 2.10 mm/< / a > < / li >
< li > < a href = "#DirStructNet" > 2.11 net< / a > < / li >
< li > < a href = "#DirStructNetUtils" > 2.12 netutils< / a > < / li >
< li > < a href = "#DirStructSched" > 2.13 sched/< / a > < / li >
< li > < a href = "#DirStructTools" > 2.14 tools/< / a > < / li >
< li > < a href = "#topmakefile" > 2.15 Makefile< / a > < / li >
2007-03-27 23:27:41 +02:00
< / ul >
2007-05-20 17:31:02 +02:00
< li > < a href = "#configandbuild" > 3.0 Configuring and Building< / a > < / li >
2007-03-27 23:27:41 +02:00
< ul >
< li > < a href = "#configuringnuttx" > 3.1 Configuring NuttX< / a > < / li >
< li > < a href = "#buildingnuttx" > 3.2 Building NuttX< / a > < / li >
2007-02-18 00:21:28 +01:00
< / ul >
2007-05-20 17:31:02 +02:00
< li > < a href = "#ArchAPIs" > 4.0 Architecture APIs< / a > < / li >
2007-03-19 23:45:58 +01:00
< ul >
< li > < a href = "#imports" > 4.1 APIs Exported by Architecture-Specific Logic to NuttX< / a > < / li >
< ul >
< li > < a href = "#upinitialize" > 4.1.1 < code > up_initialize()< / code > < / a > < / li >
< li > < a href = "#upidle" > 4.1.2 < code > up_idle()< / code > < / a > < / li >
< li > < a href = "#upinitialstate" > 4.1.3 < code > up_initial_state()< / code > < / a > < / li >
< li > < a href = "#upcreatestack" > 4.1.4 < code > up_create_stack()< / code > < / a > < / li >
< li > < a href = "#upusestack" > 4.1.5 < code > up_use_stack()< / code > < / a > < / li >
< li > < a href = "#upreleasestack" > 4.1.6 < code > up_release_stack()< / code > < / a > < / li >
< li > < a href = "#upunblocktask" > 4.1.7 < code > up_unblock_task()< / code > < / a > < / li >
< li > < a href = "#upblocktask" > 4.1.8 < code > up_block_task()< / code > < / a > < / li >
< li > < a href = "#upreleasepending" > 4.1.9 < code > up_release_pending()< / code > < / a > < / li >
< li > < a href = "#upreprioritizertr" > 4.1.10 < code > up_reprioritize_rtr()< / code > < / a > < / li >
< li > < a href = "#_exit" > 4.1.11 < code > _exit()< / code > < / a > < / li >
< li > < a href = "#upassert" > 4.1.12 < code > up_assert()< / code > < / a > < / li >
< li > < a href = "#upschedulesigaction" > 4.1.13 < code > up_schedule_sigaction()< / code > < / a > < / li >
< li > < a href = "#upallocateheap" > 4.1.14 < code > up_allocate_heap()< / code > < / a > < / li >
< li > < a href = "#upinterruptcontext" > 4.1.15 < code > up_interrupt_context()< / code > < / a > < / li >
< li > < a href = "#updisableirq" > 4.1.16 < code > up_disable_irq()< / code > < / a > < / li >
< li > < a href = "#upenableirq" > 4.1.17 < code > up_enable_irq()< / code > < / a > < / li >
< li > < a href = "#upputc" > 4.1.18 < code > up_putc()< / code > < / a > < / li >
< / ul >
< li > < a href = "#exports" > 4.2 APIs Exported by NuttX to Architecture-Specific Logic< / a > < / li >
< ul >
< li > < a href = "#osstart" > 4.2.1 < code > os_start()< / code > < / a > < / li >
< li > < a href = "#listmgmt" > 4.2.2 OS List Management APIs< / a > < / li > < / li >
< li > < a href = "#schedprocesstimer" > 4.2.3 < code > sched_process_timer()< / code > < / a > < / li >
< li > < a href = "#irqdispatch" > 4.2.4 < code > irq_dispatch()< / code > < / a > < / li >
< / ul >
< / ul >
2007-12-10 18:15:11 +01:00
< li > < a href = "#NxFileSystem" > 5.0 NuttX File System< / a > < / li >
2007-05-20 17:31:02 +02:00
< li > < a href = "#apndxconfigs" > Appendix A: NuttX Configuration Settings< / a > < / li >
2008-02-07 15:41:11 +01:00
< li > < a href = "#apndxtrademarks" > Appendix B: Trademarks< / a > < / li >
2007-02-18 00:21:28 +01:00
< hr >
< h1 > 1.0 < a name = "Introduction" > Introduction< / a > < / h1 >
< p > < b > Overview< / b >
2007-03-19 23:45:58 +01:00
This document provides and overview of the NuttX build and configuration
2008-02-07 15:41:11 +01:00
logic and provides hints for the incorporation of new processor/board architectures
2007-02-18 00:21:28 +01:00
into the build.
< / p >
< p >
2007-03-27 23:27:41 +02:00
See also < code > arch/README.txt< / code > and < code > configs/README.txt< / code > .
2007-02-18 00:21:28 +01:00
< / p >
< p > < b > General Philosophy< / b > .
< hr >
< h1 > 2.0 < a name = "DirectoryStructure" > Directory Structure< / a > < / h1 >
2007-03-27 23:27:41 +02:00
< p >
< b > Directory Structure< / b > .
The general directly layout for NuttX is very similar to the directory structure
of the Linux kernel -- at least at the most superficial layers.
At the top level is the main makefile and a series of sub-directories identified
below and discussed in the following paragraphs:
< / p >
2007-02-18 00:21:28 +01:00
< ul > < pre >
.
2007-03-27 23:27:41 +02:00
|-- < a href = "#topmakefile" > Makefile< / a >
2007-02-18 00:21:28 +01:00
|-- < a href = "#DirStructDocumentation" > Documentation< / a >
2007-03-27 23:27:41 +02:00
| `-- < i > (documentation files)< / i > /
|-- < a href = "#DirStructArch" > arch< / a > /
| |-- < i > < arch-name> < / i > /
| | |-- include/
| | | |--< i > < chip-name> < / i > /
| | | | `-- < i > (chip-specific header files)< / i >
| | | |--< i > < other-chips> < / i > /
| | | `-- < i > (architecture-specific header files)< / i >
| | `-- src/
| | |--< i > < chip-name> < / i > /
| | | `-- < i > (chip-specific source files)< / i >
| | |--< i > < other-chips> < / i > /
| | `-- < i > (architecture-specific source files)< / i >
2008-02-07 15:41:11 +01:00
| `-- < i > < other-architecture directories> < / i > /
2007-03-27 23:27:41 +02:00
|-- < a href = "#DirStructConfigs" > configs< / a > /
| |-- < i > < board-name> < / i > /
| | |-- include/
2008-11-26 16:46:12 +01:00
| | | `-- < i > (other board-specific header files)< / i >
2007-03-27 23:27:41 +02:00
| | |-- src/
2008-11-26 16:46:12 +01:00
| | | `-- < i > (board-specific source files)< / i >
| | |---< i > < config-name> < / i > /
| | | `-- < i > (board configuration-specific source files)< / i >
| | `---< i > (other configuration sub-directories for this board)< / i > /
2008-02-07 15:41:11 +01:00
| `-- < i > < (other board directories)> < / i > /
2007-09-08 17:26:55 +02:00
|-- < a href = "#DirStructDrivers" > drivers< / a > /
| |-- Makefile
2008-11-26 16:46:12 +01:00
| |-- < i > (driver-specific sub-directories)/< / i >
| | `-- < i > (driver-specific source files)< / i >
2007-03-27 23:27:41 +02:00
| `-- < i > (common driver source files)< / i >
|-- < a href = "#DirStructExamples" > examples< / a > /
| `-- < i > (example)< / i > /
2007-02-18 00:21:28 +01:00
| |-- Makefile
| `-- < i > (example source files)< / i >
2007-03-27 23:27:41 +02:00
|-- < a href = "#DirStructFs" > fs< / a > /
2007-02-18 00:21:28 +01:00
| |-- Makefile
2008-11-26 16:46:12 +01:00
| |-- < i > (file system-specific sub-directories)< / i > /
| | `-- < i > (file system-specific source files)< / i >
2007-09-08 17:26:55 +02:00
| `-- < i > (common file system source files)< / i >
2008-11-26 16:46:12 +01:00
|-- < a href = "#DirStructGraphics" > graphics< / a > /
| |-- Makefile
| |-- < i > (feature-specific sub-directories)< / i > /
| | `-- < i > (feature-specific source files library source files)< / i >
| `-- < i > (common graphics-related source files)< / i >
2007-03-27 23:27:41 +02:00
|-- < a href = "#DirStructInclude" > include< / a > /
2007-02-18 00:21:28 +01:00
| |-- < i > (standard header files)< / i >
2008-11-26 16:46:12 +01:00
| |-- < i > (standard include sub-directories)< / i >
2007-02-18 00:21:28 +01:00
| | `-- < i > (more standard header files)< / i >
2008-11-26 16:46:12 +01:00
| |-- < i > (non-standard include sub-directories)< / i >
| `-- < i > (non-standard header files)< / i >
2007-03-27 23:27:41 +02:00
|-- < a href = "#DirStructLib" > lib< / a > /
2007-02-18 00:21:28 +01:00
| |-- Makefile
| `-- < i > (lib source files)< / i >
2007-03-27 23:27:41 +02:00
|-- < a href = "#DirStructMm" > mm< / a > /
2007-02-18 00:21:28 +01:00
| |-- Makefile
2007-09-08 17:26:55 +02:00
| `-- < i > (memory management source files)< / i >
|-- < a href = "#DirStructNet" > net< / a > /
| |-- Makefile
| |-- uip/
| | `-- < i > (uip source files)< / i >
2008-11-26 16:46:12 +01:00
| `-- < i > (BSD socket source files)< / i >
2007-09-08 17:26:55 +02:00
|-- < a href = "#DirStructNetUtils" > netutils< / a > /
| |-- Makefile
2008-11-26 16:46:12 +01:00
| |-- < i > (network feature sub-directories)< / i > /
| | `-- < i > (network feature source files)< / i >
| `-- < i > (netutils common files)< / i >
2007-03-27 23:27:41 +02:00
|-- < a href = "#DirStructSched" > sched< / a > /
2007-02-18 00:21:28 +01:00
| |-- Makefile
| `-- < i > (sched source files)< / i >
2008-11-26 16:46:12 +01:00
`-- < a href = "#DirStructTools" > tools< / a > /
`-- < i > (miscellaneous scripts and programs)< / i >
2007-02-18 00:21:28 +01:00
< / pre > < / ul >
2007-03-27 23:27:41 +02:00
< p >
< b > Configuration Files< / b > .
The NuttX configuration consists of:
< / p >
< ul >
< li >
< i > Processor architecture specific files< / i > .
These are the files contained in the < code > arch/< / code > < i > < arch-name> < / i > < code > /< / code > directory
and are discussed in a paragraph < a href = "#archdirectorystructure" > below< / a > .
< / li >
< li >
< i > Chip/SoC specific files< / i > .
Each processor processor architecture is embedded in chip or < i > System-on-a-Chip< / i > (SoC) architecture.
The full chip architecture includes the processor architecture plus chip-specific interrupt logic,
clocking logic, general purpose I/O (GIO) logic, and specialized, internal peripherals (such as UARTs, USB, etc.).
< p >
These chip-specific files are contained within chip-specific sub-directories in the
< code > arch/< / code > < i > < arch-name> < / i > < code > /< / code > directory and are selected via
the < code > CONFIG_ARCH_name< / code > selection.
< / p >
< / li >
< li >
2008-02-07 15:41:11 +01:00
< i > Board specific configurations< / i > .
2007-03-27 23:27:41 +02:00
In order to be usable, the chip must be contained in a board environment.
The board configuration defines additional properties of the board including such things as
peripheral LEDs, external peripherals (such as network, USB, etc.).
< p >
These board-specific configuration files can be found in the
< code > configs/< / code > < i > < board-name> < / i > < code > /< / code > sub-directories and are discussed
2008-02-07 15:41:11 +01:00
in a paragraph < a href = "#configsdirectorystructure" > below< / a > .
2007-03-27 23:27:41 +02:00
< / p >
< / li >
< / ul >
2007-02-18 00:21:28 +01:00
< h2 > 2.1 < a name = "DirStructDocumentation" > Documentation< / a > < / h2 >
2007-03-19 23:45:58 +01:00
< p >
General documentation for the NuttX OS resides in this directory.
< / p >
2007-02-18 00:21:28 +01:00
< h2 > 2.2 < a name = "DirStructArch" > arch< / a > < / h2 >
2007-03-19 23:45:58 +01:00
2007-03-23 03:25:54 +01:00
< h3 > < a name = "archdirectorystructure" > 2.2.1 Subdirectory Structure< / a > < / h3 >
2007-03-19 23:45:58 +01:00
< p >
This directory contains several sub-directories, each containing
architecture-specific logic.
2007-03-23 03:25:54 +01:00
The task of porting NuttX to a new processor consists of
2008-02-07 15:41:11 +01:00
add a new subdirectory under < code > arch/< / code > containing logic specific
to the new architecture.
2007-03-23 03:25:54 +01:00
The complete board port in is defined by the architecture-specific code in this
directory (plus the board-specific configurations in the < code > config/< / code >
subdirectory).
2007-03-27 23:27:41 +02:00
Each architecture must provide a subdirectory, < i > < arch-name> < / i >
2007-03-23 03:25:54 +01:00
under < code > arch/< / code > with the following characteristics:
2007-03-19 23:45:58 +01:00
< / p >
< ul > < pre >
2008-11-26 16:46:12 +01:00
< i > < arch-name> < / i > /
|-- include/
| |--< i > < chip-name> < / i > /
| | `-- < i > (chip-specific header files)< / i >
| |--< i > < other-chips> < / i > /
| |-- arch.h
| |-- irq.h
| |-- types.h
| `-- limits.h
`-- src/
|--< i > < chip-name> < / i > /
| `-- < i > (chip-specific source files)< / i >
|--< i > < other-chips> < / i > /
|-- Makefile
`-- < i > (architecture-specific source files)< / i >
2007-03-19 23:45:58 +01:00
< / pre > < / ul >
2007-03-23 03:25:54 +01:00
< h3 > < a name = "summaryofarchfiles" > 2.2.2 Summary of Files< / a > < / h3 >
2007-03-19 23:45:58 +01:00
< ul >
2007-03-27 23:27:41 +02:00
< li >
< code > include/< / code > < i > < chip-name> < / i > < code > /< / code >
This sub-directory contains chip-specific header files.
< / li >
2007-03-19 23:45:58 +01:00
< li >
< code > include/arch.h< / code > :
This is a hook for any architecture specific definitions that may
be needed by the system. It is included by < code > include/nuttx/arch.h< / code > .
< / li >
< li >
< code > include/types.h< / code > :
This provides architecture/toolchain-specific definitions for
standard types. This file should < code > typedef< / code > :
< ul > < code >
sbyte, ubyte, uint8, boolean, sint16, uint16, sint32, uint32
< / code > < / ul >
< p > and if the architecture supports 64-bit integers< / p >
< ul > < code >
sint64, uint64
< / code > < / ul >
< p >
and finally
< / p >
< ul > < code >
irqstate_t
< / code > < / ul >
< p >
Must be defined to the be the size required to hold the interrupt
enable/disable state.
< / p >
< p >
This file will be included by include/sys/types.h and be made
available to all files.
< / p >
< / li >
< li >
< code > include/irq.h< / code > :
This file needs to define some architecture specific functions (usually
inline if the compiler supports inlining) and structure. These include:
< ul >
< li >
< code > struct xcptcontext< / code > :
This structures represents the saved context of a thread.
< / li >
< li >
< code > irqstate_t irqsave(void)< / code > :
Used to disable all interrupts.
< / li >
< li >
< code > void irqrestore(irqstate_t flags)< code > :
Used to restore interrupt enables to the same state as before < code > irqsave()< / code > was called.
< / li >
< / ul >
< p >
This file must also define < code > NR_IRQS< / code > , the total number of IRQs supported
by the board.
< / p >
< / li >
2007-03-27 23:27:41 +02:00
< li >
< code > src/< / code > < i > < chip-name> < / i > < code > /< / code >
This sub-directory contains chip-specific source files.
< / li >
2007-03-19 23:45:58 +01:00
< li >
< code > src/Makefile< / code > :
This makefile will be executed to build the targets < code > src/libup.a< / code > and
< code > src/up_head.o< / code > . The < code > up_head.o< / code > file holds the entry point into the system
(power-on reset entry point, for example). It will be used in
the final link with < code > libup.a< / code > and other system archives to generate the
final executable.
< / li >
2007-03-23 03:25:54 +01:00
< li >
< i > (architecture-specific source files)< / i > .
The file < code > include/nuttx/arch.h< / code > identifies all of the APIs that must
be provided by the architecture specific logic. (It also includes
2007-03-27 23:27:41 +02:00
< code > arch/< / code > < i > < arch-name> < / i > < code > /arch.h< / code > as described above).
2007-03-23 03:25:54 +01:00
< / li >
2007-03-19 23:45:58 +01:00
< / ul >
< h3 > < a name = "supportedarchitectures" > 2.2.3 Supported Architectures< / a > < / h3 >
2007-04-28 22:07:05 +02:00
< p >
< b > Archictecture- and Chip-Specific Directories< / b > .
All processor architecture-specific directories are maintained in sub-directories of
the < code > arch/< / code > directory.
Different chips or SoC's may implement the same processor core.
Chip-specific logic can be found in sub-directories under the architecture
directory.
Current architecture/chip directories are summarized below:
< / p >
2007-03-19 23:45:58 +01:00
< ul >
< li > < code > arch/sim< / code > :
A user-mode port of NuttX to the x86 Linux platform is available.
The purpose of this port is primarily to support OS feature developement.
This port does not support interrupts or a real timer (and hence no
round robin scheduler) Otherwise, it is complete.
2007-04-28 22:07:05 +02:00
< / li >
2007-09-21 02:43:20 +02:00
< p > NOTE: This target will not run on Cygwin probably for many reasons but
first off because it uses some of the same symbols as does cygwind.dll.
< / p >
2007-04-25 02:09:44 +02:00
2007-04-28 22:07:05 +02:00
< li > < code > arch/arm< / code > :
This directory holds common ARM architectures. At present, this includes
the following subdirectories:
< ul >
2008-02-11 18:11:20 +01:00
< li > < code > arch/arm/include< / code > and < code > arch/arm/src/common< / code > :
2007-04-28 22:07:05 +02:00
Common ARM logic.
< / li >
< li > < code > arch/arm/include/c5471< / code > and < code > arch/arm/src/c5471< / code > :
TI TMS320C5471 (also called TMS320DM180 or just C5471).
NuttX operates on the ARM7 of this dual core processor.
This port is complete, verified, and included in the NuttX release 0.1.1.
< / li >
< li > < code > arch/arm/include/dm320< / code > and < code > arch/arm/src/dm320< / code > :
TI TMS320DM320 (also called just DM320).
NuttX operates on the ARM9EJS of this dual core processor.
This port complete, verified, and included in the NuttX release 0.2.1.
< / li >
2007-04-29 23:50:53 +02:00
< li > < code > arch/arm/include/lpc214x< / code > and < code > arch/arm/src/lpc214x< / code > :
These directories provide support for NXP LPC214x family of
processors.
STATUS: This port is in progress and should be available in the
nuttx-0.2.5 release.
< / li >
2007-04-28 22:07:05 +02:00
< / ul >
< / li >
2007-04-25 02:09:44 +02:00
< li > < code > configs/mcu123-lpc214x< / code > :
The mcu123.com lpc214x development board.
This is a work in progress.
2007-04-28 22:07:05 +02:00
< / li >
2007-04-25 02:09:44 +02:00
2007-03-23 03:25:54 +01:00
< li > < code > arch/m68322< / code >
2008-01-08 00:13:12 +01:00
A work in progress.
2007-04-28 22:07:05 +02:00
< / li >
2007-04-25 02:09:44 +02:00
2007-03-19 23:45:58 +01:00
< li > < code > arch/pjrc-8051< / code > :
2008-01-08 00:13:12 +01:00
8051 Microcontroller. This port is not quite ready for prime time.
2007-04-28 22:07:05 +02:00
< / li >
2007-12-31 01:50:09 +01:00
2008-01-08 00:13:12 +01:00
< li > < code > arch/z16f< / code > :
Zilog z16f Microcontroller.
This port uses the Zilog z16f2800100zcog Development Kit.
2008-02-11 18:11:20 +01:00
This port was released with nuttx-0.3.7.
2008-01-08 00:13:12 +01:00
< / li >
< li > < code > arch/z80< / code > :
2008-02-11 18:11:20 +01:00
This directory holds 8-bit ZiLOG architectures. At present, this includes the
2008-03-15 21:04:06 +01:00
Zilog z80, ez80Acclaim! and z8Encore! Microcontrollers.
2008-02-11 18:11:20 +01:00
< ul >
< li > < code > arch/z80/include< / code > and < code > arch/z80/src/common< / code > :
Common logic.
< / li >
< li > < code > arch/z80/include/z80< / code > and < code > arch/z80/src/z80< / code > :
The Z80 port was released in nuttx-0.3.6 has been verified using only a
z80 instruction simulator.
The set simulator can be found in the NuttX CVS at
http://nuttx.cvs.sourceforge.net/nuttx/misc/sims/z80sim.
2008-02-15 23:14:00 +01:00
This port also uses the SDCC toolchain (http://sdcc.sourceforge.net/")
2008-02-11 18:11:20 +01:00
(verified with version 2.6.0 and 2.7.0).
< / li >
2008-03-15 21:04:06 +01:00
< li > < code > arch/z80/include/ez80< / code > and < code > arch/z80/src/ez80< / code > :
The ez80Acclaim! port uses the ZiLOG ez80f0910200kitg development kit, eZ80F091 part,
with the Zilog ZDS-II Windows command line tools.
The development environment is Cygwin under WinXP.
This is a work in progress. Verified ez80 support will be announced in a future NuttX release.
< / li >
2008-02-11 18:11:20 +01:00
< li > < code > arch/z80/include/z8< / code > and < code > arch/z80/src/z8< / code > :
2008-03-11 00:37:56 +01:00
The Z8Encore! port uses either the ZiLOG z8encore000zco development kit, Z8F6403 part,
or the z8f64200100kit development kit, Z8F6423 part with the Zilog ZDS-II Windows command line
2008-02-11 18:11:20 +01:00
tools. The development environment is Cygwin under WinXP.
2008-03-15 21:04:06 +01:00
The initial release, verified only on the ZDS-II ez8 simulator, was released in nuttx-0.3.9.
2008-02-11 18:11:20 +01:00
< / li >
< / ul >
< / li >
2007-04-28 22:07:05 +02:00
< / ul >
< p >
< b > Deprecated Architecture Directories< / b > .
The following architecture directories are deprecated. They have been
replaced by the logic in < code > arm/arm< / code > and will deleted when
< code > arch/arm< / code > is fully verified.
< / p >
< ul >
< li > < code > arch/c5471< / code > :
Replaced with < code > arch/arm/include/c5471< / code > and
< code > arch/arm/src/c5471< code > .
< / li >
< li > < code > arch/dm320< / code > :
Replaced with < code > arch/arm/include/dm320< / code > and
< code > arch/arm/src/dm320< code > .
< / li >
2007-03-19 23:45:58 +01:00
< / ul >
< p >
Other ports for the for the TI TMS320DM270 and for MIPS are in various states
of progress
< / p >
2007-03-23 03:25:54 +01:00
< h2 > 2.3 < a name = "DirStructConfigs" > configs< / a > < / h2 >
< p >
The < code > configs/< / code > subdirectory contains configuration data for each board.
These board-specific configurations plus the architecture-specific configurations in
the < code > arch/< / code > subdirectory complete define a customized port of NuttX.
< / p >
< h3 > < a name = "configsdirectorystructure" > 2.3.1 Subdirectory Structure< / a > < / h3 >
< p >
The configs directory contains board specific configuration files. Each board must
provide a subdirectory < board-name> under < code > configs/< / code > with the following characteristics:
< / p >
< ul > < pre >
2008-11-26 16:46:12 +01:00
< i > < board-name> < / i >
|-- include/
| |-- board.h
| `-- < i > (board-specific header files)< / i >
|-- src/
| |-- Makefile
| `-- < i > (board-specific source files)< / i >
|-- < i > < config1-dir> < / i >
| |-- Make.defs
| |-- defconfig
| `-- setenv.sh
|-- < i > < config2-dir> < / i >
| |-- Make.defs
| |-- defconfig
| `-- setenv.sh
| ...
`-- < i > (other board-specific configuration sub-directories)< / i > /
2007-03-23 03:25:54 +01:00
< / pre > < / ul >
2007-03-27 23:27:41 +02:00
< h3 > < a name = "summaryofconfigfiles" > 2.3.2 Summary of Files< / a > < / h3 >
< h4 > < a name = "boardlogic" > 2.3.2.1 Board Specific Logic< / a > < / h4 >
2007-03-23 03:25:54 +01:00
< ul >
2007-03-26 18:47:17 +02:00
< li >
< code > include/< / code > :
This directory contains board specific header files.
This directory will be linked as < code > include/arch/board< / code > at configuration time
and can be included via < code > #include < arch/board/header.h> < / code > .
2007-03-27 23:27:41 +02:00
These header file can only be included by files in < code > arch/< / code > < i > < arch-name> < / i > < code > /include/< / code >
and < code > arch/< / code > < i > < arch-name> < / i > < code > /src/< / code > .
2007-03-26 18:47:17 +02:00
< / li >
2007-03-27 00:14:28 +02:00
< li >
< code > src/< / code > :
This directory contains board specific drivers.
2007-03-27 23:27:41 +02:00
This directory will be linked as < config > arch/< / code > < i > < arch-name> < / i > < code > /src/board< / config > at configuration
2007-03-27 00:14:28 +02:00
time and will be integrated into the build system.
< / li >
< li >
< code > src/Makefile< / code > :
This makefile will be invoked to build the board specific drivers.
It must support the following targets: < code > libext$(LIBEXT)< / code > , < code > clean< / code > , and < code > distclean< / code > .
< / li >
2007-03-27 23:27:41 +02:00
< / ul >
2008-02-07 15:41:11 +01:00
< h4 > < a name = "boardconfigsubdirs" > 2.3.2.2 Board Specific Configuration Sub-Directories< / a > < / h4 >
2007-03-27 23:27:41 +02:00
< p >
The < code > configs/< / code > < i > < board-name> < / i > < code > /< / code > sub-directory holds all of the
files that are necessary to configure Nuttx for the particular board.
2008-02-07 15:41:11 +01:00
A board may have various different configurations using the common source files.
Each board configuration is described by three files: < code > Make.defs< / code > , < code > defconfig< / code > , and < code > setenv.sh< / code > .
Typically, each set of configuration files is retained in a separate configuration sub-directory
(< i > < config1-dir> < / i > , < i > < config2-dir> < / i > , .. in the above diagram).
2007-03-27 23:27:41 +02:00
The procedure for configuring NuttX is described < a href = "#configuringnuttx" > below< / a > ,
This paragraph will describe the contents of these configuration files.
< / p >
< ul >
2007-03-23 03:25:54 +01:00
< li >
< code > Make.defs< / code > : This makefile fragment provides architecture and
tool-specific build options. It will be included by all other
makefiles in the build (once it is installed). This make fragment
should define:
< ul >
< li > Tools: CC, LD, AR, NM, OBJCOPY, OBJDUMP< / li >
< li > Tool options: CFLAGS, LDFLAGS< / li >
2008-01-10 14:38:13 +01:00
< li > COMPILE, ASSEMBLE, ARCHIVE, CLEAN, and MKDEP macros< / li >
2007-03-23 03:25:54 +01:00
< / ul >
< p >
When this makefile fragment runs, it will be passed TOPDIR which
is the path to the root directory of the build. This makefile
fragment may include ${TOPDIR}/.config to perform configuration
specific settings. For example, the CFLAGS will most likely be
different if CONFIG_DEBUG=y.
2007-03-26 18:47:17 +02:00
< / p >
2007-03-23 03:25:54 +01:00
< / li >
< li >
< code > defconfig< / code > : This is a configuration file similar to the Linux
2008-02-07 15:41:11 +01:00
configuration file. In contains variable/value pairs like:
2007-03-23 03:25:54 +01:00
< ul >
< li > < code > CONFIG_VARIABLE< / code > =value< / li >
< / ul >
< p >
This configuration file will be used at build time:
< / p >
< ol >
< li > As a makefile fragment included in other makefiles, and< / li >
< li > to generate < code > include/nuttx/config.h< / code > which is included by
most C files in the system.< / li >
< / ol >
< / li >
< li >
< code > setenv.sh< / code > : This is a script that you can include that will be installed at
the toplevel of the directory structure and can be sourced to set any
necessary environment variables.
< / li >
< / ul >
2007-03-27 23:27:41 +02:00
< h3 > < a name = "supportedboards" > 2.3.3 Supported Boards< / a > < / h3 >
< p >
All of the specific boards supported by NuttX are identified below.
2008-02-15 23:14:00 +01:00
These are the specific < i > < board-name> < / i > 's that may be used to configure NuttX
2007-03-27 23:27:41 +02:00
as described < a href = "#configuringnuttx" > below< / a > .
< / p >
2007-03-23 03:25:54 +01:00
< ul >
< li > < code > configs/c5471evm< / code > :
This is a port to the Spectrum Digital C5471 evaluation board. The
C5471 is a dual core processor from TI with an ARM7TDMI general purpose
processor and a c54 SDP. NuttX runs on the ARM core and is built with
2008-01-04 14:11:45 +01:00
with a GNU arm-elf toolchain* under Linux or Cygwin.
This port is complete, verified, and included in the NuttX release.
2007-04-29 23:50:53 +02:00
< / li >
2007-03-23 03:25:54 +01:00
2008-11-05 23:16:22 +01:00
< li > < code > configs/ez80f0910200kitg< / code >
ez80Acclaim! Microcontroller. This port use the Zilog ez80f0910200kitg
development kit, eZ80F091 part, and the Zilog ZDS-II Windows command line
tools. The development environment is Cygwin under WinXP.
< / li >
< li > < code > configs/m68322evb< / code > :
This is a work in progress for the venerable m68322evb board from
Motorola.
< / li >
2007-04-25 02:09:44 +02:00
< li > < code > configs/mcu123-lpc214x< / code > :
2007-04-29 23:50:53 +02:00
This port is for the NXP LPC2148 as provided on the mcu123.com
lpc214x development board.
2008-01-04 14:11:45 +01:00
This OS is also built with the arm-elf toolchain* under Linux or Cygwin.
2008-11-05 23:16:22 +01:00
The port supports serial, timer0, spi, and usb.
2007-04-29 23:50:53 +02:00
< / li >
2007-04-25 02:09:44 +02:00
2007-03-23 03:25:54 +01:00
< li > < code > configs/ntosd-dm320< / code > :
2008-01-04 14:11:45 +01:00
This port uses the Neuros OSD with a GNU arm-elf toolchain* under Linux or Cygwin.
2007-03-23 03:25:54 +01:00
See < a href = "http://wiki.neurostechnology.com/index.php/Developer_Welcome" > Neuros Wiki< / a >
for futher information.
NuttX operates on the ARM9EJS of this dual core processor.
STATUS: This port is code complete, verified, and included in the
2007-04-29 23:50:53 +02:00
NuttX 0.2.1 release.
< / li >
2007-03-23 03:25:54 +01:00
2008-11-05 23:16:22 +01:00
< li > < code > configs/olimex-strp711< / code > :
This port uses the Olimex STR-P711 board arm-elf toolchain* under Linux or Cygwin.
See the < a href = "http://www.olimex.com/dev/str-p711.html" > Olimex< / a > web site
for futher information.
STATUS: Coding for the basic port -- serial console and system timer -- is complete
but untested to problems I am having using OpenOCD with a wiggler clone JTAG.
2007-04-29 23:50:53 +02:00
< / li >
2007-03-23 03:25:54 +01:00
< li > < code > configs/pjrc-8051< / code > :
8051 Microcontroller. This port uses the PJRC 87C52 development system
2008-01-04 14:11:45 +01:00
and the < a href = "http://sdcc.sourceforge.net/" > SDCC< / a > toolchain under Linux or Cygwin.
2007-12-31 01:50:09 +01:00
This port is not quite ready for prime time.
< / li >
2008-11-05 23:16:22 +01:00
< li > < code > configs/sim< / code > :
A user-mode port of NuttX to the x86 Linux platform is available.
The purpose of this port is primarily to support OS feature developement.
This port does not support interrupts or a real timer (and hence no
round robin scheduler) Otherwise, it is complete.
< / li >
< li > < code > configs/us7032evb1< / code > :
This is a port of the Hitachi SH-1 on the Hitachi SH-1/US7032EVB1 board.
STATUS: Work has just began on this port.
< / li >
< li > < code > configs/xtrs< / code > :
2008-02-15 23:14:00 +01:00
TRS80 Model 3. This port uses a vintage computer based on the Z80.
An emulator for this computer is available to run TRS80 programs on a
linux platform (http://www.tim-mann.org/xtrs.html).
< / li >
2008-01-08 00:13:12 +01:00
< li > < code > configs/z16f2800100zcog< / code >
2008-02-15 23:14:00 +01:00
z16f Microcontroller.
2008-01-08 00:13:12 +01:00
This port use the Zilog z16f2800100zcog development kit and the
Zilog ZDS-II Windows command line tools.
The development environment is Cygwin under WinXP.
2008-02-11 18:11:20 +01:00
< / li >
2008-11-05 23:16:22 +01:00
< li > < code > configs/z80sim< / code > :
z80 Microcontroller. This port uses a Z80 instruction set simulator.
That simulator can be found in the NuttX CVS
< a href = "http://nuttx.cvs.sourceforge.net/nuttx/misc/sims/z80sim/" > here< / a > .
This port also the < a href = "http://sdcc.sourceforge.net/" > SDCC< / a > toolchain
under Linux or Cygwin(verfied with version 2.6.0).
2008-03-15 21:04:06 +01:00
< / li >
2008-02-11 18:11:20 +01:00
< li > < code > configs/z8encore000zco< / code >
2008-02-15 23:14:00 +01:00
z8Encore! Microcontroller. This port use the Zilog z8encore000zco
2008-02-15 21:14:05 +01:00
development kit, Z8F6403 part, and the Zilog ZDS-II Windows command line
2008-02-11 18:11:20 +01:00
tools. The development environment is Cygwin under WinXP.
< / li >
2008-01-08 00:13:12 +01:00
2008-03-11 00:37:56 +01:00
< li > < code > configs/z8encore000zco< / code >
z8Encore! Microcontroller. This port use the Zilog z8f64200100kit
development kit, Z8F6423 part, and the Zilog ZDS-II Windows command line
tools. The development environment is Cygwin under WinXP.
< / li >
2007-03-23 03:25:54 +01:00
< / ul >
< p > < small > < blockquote >
* A customized version of the < a href = "http://www.buildroot.org" > buildroot< / a >
2008-01-04 14:11:45 +01:00
is available to build these toolchains under Linux or Cygwin.
2007-03-23 03:25:54 +01:00
< / blockquote > < / small > < / p >
< h2 > 2.4 < a name = "DirStructDrivers" > drivers< / a > < / h2 >
2007-03-19 23:45:58 +01:00
< p >
This directory holds architecture-independent device drivers.
< / p >
2008-11-26 16:46:12 +01:00
< ul > < pre >
drivers/
|-- Makefile
|-- bch/
| |-- Make.defs
| `-- < i > (bch driver source files)< / i >
|-- mmcsd/
| |-- Make.defs
| `-- < i > (mmcsd driver source files)< / i >
|-- net/
| |-- Make.defs
| `-- < i > (net driver source files)< / i >
|-- usbdev/
| |-- Make.defs
| `-- < i > (usbdev driver source files)< / i >
`-- < i > (common driver source files)< / i >
< / pre > < / ul >
2007-03-19 23:45:58 +01:00
2007-03-23 03:25:54 +01:00
< h2 > 2.5 < a name = "DirStructExamples" > examples< / a > < / h2 >
2007-03-19 23:45:58 +01:00
< p >
Example and test programs to build against.
< / p >
2007-03-23 03:25:54 +01:00
< h2 > 2.6 < a name = "DirStructFs" > fs< / a > < / h2 >
2007-03-19 23:45:58 +01:00
< p >
2007-12-10 18:15:11 +01:00
This directory contains the NuttX file system.
This file system is described < a href = "#NxFileSystem" > below< / a > .
2007-03-19 23:45:58 +01:00
< / p >
2008-11-26 16:46:12 +01:00
< ul > < pre >
fs/
|-- Makefile
|-- fat/
| |-- Make.defs
| `-- < i > (fat file system source files)< / i >
|-- romfs/
| |-- Make.defs
| `-- < i > (romfs file system source files)< / i >
`-- < i > (common file system source files)< / i >
< / pre > < / ul >
< h2 > 2.7 < a name = "DirStructGraphics" > graphics< / a > < / h2 >
< p >
This directory contains files for graphics/video support under NuttX.
< / p >
< ul > < pre >
graphics/
|-- Makefile
|-- nxglib/
| |-- Make.defs
| `-- < i > (NuttX graphics library source files)< / i >
|-- nx/
| |-- Make.defs
| `-- < i > (Nuttx X-server source files)< / i >
`-- < i > (common file system source files)< / i >
< / pre > < / ul >
2007-03-19 23:45:58 +01:00
2008-11-26 16:46:12 +01:00
< h2 > 2.8 < a name = "DirStructInclude" > include< / a > < / h2 >
2007-03-19 23:45:58 +01:00
< p >
This directory holds NuttX header files.
Standard header files file retained in can be included in the < i > normal< / i > fashion:
< / p >
< ul >
2008-11-26 16:46:12 +01:00
< code > include < stdio.h> < / code > < br >
2007-03-19 23:45:58 +01:00
< code > include < sys/types.h> < / code > < br >
etc.
< / ul >
2008-11-26 16:46:12 +01:00
< p >
Directory structure:
< / p >
< ul > < pre >
include/
|-- < i > (standard header files)< / i >
|-- arpa/
| `-- < i > (standard header files)< / i >
|-- net/
| `-- uip/
| `-- < i > (uIP specific header files)< / i >
|-- netinet/
| `-- < i > (standard header files)< / i >
|-- nuttx/
| `-- < i > (nuttx specific header files)< / i >
`- sys/
`-- < i > (more standard header files)< / i >
< / per > < / ul >
< h2 > 2.9 < a name = "DirStructLib" > lib< / a > < / h2 >
2007-03-19 23:45:58 +01:00
< p >
This directory holds a collection of standard libc-like functions with custom
interfaces into Nuttx.
< / p >
2008-11-26 16:46:12 +01:00
< h2 > 2.10 < a name = "DirStructMm" > mm< / a > < / h2 >
2007-03-19 23:45:58 +01:00
< p >
This is the NuttX memory manager.
< / p >
2008-11-26 16:46:12 +01:00
< h2 > 2.11 < a name = "DirStructNet" > net< / a > < / h2 >
2007-09-08 17:26:55 +02:00
< p >
This directory contains the implementation of the socket APIs.
The subdirectory, < code > uip< / code > contians the uIP port.
< / P >
2008-11-26 16:46:12 +01:00
< h2 > 2.12 < a name = "DirStructNetUtils" > netutils< / a > < / h2 >
2007-09-08 17:26:55 +02:00
< p >
2008-11-26 16:46:12 +01:00
This directory contains most of the network applications.
Some of these are original with NuttX (like tftpc) and others were leveraged from the uIP-1.0 apps directory.
As the uIP apps/README says, these applications " are not all heavily tested."
2007-09-08 17:26:55 +02:00
< / p >
2008-11-26 16:46:12 +01:00
< ul > < pre >
netutils/
|-- Makefile
|-- dhcp/
| |-- Make.defs
| `-- < i > (dhcp source files)< / i >
|-- dhcpd/
| |-- Make.defs
| `-- < i > (dhcpd source files)< / i >
|-- resolv/
| |-- Make.defs
| `-- < i > (resolv source files)< / i >
|-- smtp/
| |-- Make.defs
| `-- < i > (smtp source files)< / i >
|-- telnetd/
| |-- Make.defs
| `-- < i > (telnetd source files)< / i >
|-- tftpc/
| |-- Make.defs
| `-- < i > (tftpc source files)< / i >
|-- uiplib/
| |-- Make.defs
| `-- < i > (uiplib source files)< / i >
|-- weblclient/
| |-- Make.defs
| `-- < i > (webclient source files)< / i >
|-- webserver/
| |-- Make.defs
| `-- < i > (webserver source files)< / i >
`-- < i > (netutils common files)< / i >
< / pre > < / ul >
2007-09-08 17:26:55 +02:00
2008-11-26 16:46:12 +01:00
< h2 > 2.13 < a name = "DirStructSched" > sched< / a > < / h2 >
2007-03-19 23:45:58 +01:00
< p >
The files forming core of the NuttX RTOS reside here.
< / p >
2008-11-26 16:46:12 +01:00
< h2 > 2.14 < a name = "DirStructTools" > tools< / a > < / h2 >
2007-03-19 23:45:58 +01:00
< p >
This directory holds a collection of tools and scripts to simplify
2008-11-26 16:46:12 +01:00
configuring, building and maintaining NuttX.
2007-03-19 23:45:58 +01:00
< / p >
2008-11-26 16:46:12 +01:00
< ul > < pre >
tools/
|-- Makefile.mkconfig
|-- configure.sh
|-- incdir.sh
|-- indent.sh
|-- link.sh
|-- mkconfig.c
|-- mkdeps.sh
|-- mkimage.sh
|-- mknulldeps.sh
|-- unlink.sh
|-- winlink.sh
`-- zipme
< / pre > < / ul >
2007-03-19 23:45:58 +01:00
2008-11-26 16:46:12 +01:00
< h2 > 2.15 < a name = "topmakefile" > Makefile< / a > < / h2 >
2007-03-27 23:27:41 +02:00
< p >
The top-level < code > Makefile< / code > in the < code > ${TOPDIR}< / code > directory contains all of the top-level control
logic to build NuttX.
Use of this < code > Makefile< / code > to build NuttX is described < a href = "#buildingnuttx" > below< / a > .
< / p >
2007-02-18 00:21:28 +01:00
< hr >
2007-03-27 23:27:41 +02:00
< h1 > 3.0 < a name = "configandbuild" > Configuring and Building< / a > < / h1 >
< h2 > < a name = "configuringnuttx" > 3.1 Configuring NuttX< / a > < / h2 >
< p >
< b > Manual Configuration< / b > .
Configuring NuttX requires only copying the
2008-02-07 15:41:11 +01:00
< a href = "#boardconfigsubdirs" > board-specific configuration files< / a > into the top level directory which appears in the make files as the make variable, < code > ${TOPDIR}< / code > .
2007-03-27 23:27:41 +02:00
This could be done manually as follows:
< / p >
< ul >
2008-02-07 15:41:11 +01:00
< li > Copy < code > configs/< / code > < i > < board-name> < / i > < code > /[< / code > < i > < config-dir> < / i > < code > /]Make.def< / code > to < code > ${TOPDIR}/Make.defs< / code > ,< li >
< li > Copy < code > configs/< / code > < i > < board-name> < / i > < code > /[< / code > < i > < config-dir> < / i > < code > /]setenv.sh< / code > to < code > ${TOPDIR}/setenv.sh< / code > , and< / li >
< li > Copy < code > configs/< / code > < i > < board-name> < / i > < code > /[< / code > < i > < config-dir> < / i > < code > /]defconfig< / code > to < code > ${TOPDIR}/.config< / code > < / li >
2007-03-27 23:27:41 +02:00
< / ul >
< p >
Where < i > < board-name> < / i > is the name of one of the sub-directories of the
NuttX < a href = "#DirStructConfigs" > < code > configs/< / code > < / a > directory.
This sub-directory name corresponds to one of the supported boards
identified < a href = "#supportedboards" > above< / a > .
2008-02-07 15:41:11 +01:00
And < config-dir> is the optional, specific configuration directory for the board.
2007-03-27 23:27:41 +02:00
< / p >
< p >
< b > Automated Configuration< / b > .
There is a script that automates these steps. The following steps will
accomplish the same configuration:
< / p >
< ul > < pre >
cd tools
2008-02-07 15:41:11 +01:00
./configure.sh < i > < board-name> < / i > < / i > < code > [/< / code > < i > < config-dir> < / i > < code > ]< / code >
2007-03-27 23:27:41 +02:00
< / pre > < / ul >
< p >
< b > Additional Configuration Steps< / b > .
The remainder of configuration steps will be performed by < a href = "#topmakefile" > < code > ${TOPDIR}/Makefile< / code > < / a >
the first time the system is built as described below.
< / p >
< h2 > < a name = "buildingnuttx" > 3.2 Building NuttX< / a > < / h2 >
< p >
< b > Building NuttX< / b > .
Once NuttX has been configured as described < a href = "#configuringnuttx" > above< / a > , it may be built as follows:
< / p >
< ul > < pre >
cd ${TOPDIR}
source ./setenv.sh
make
< / pre > < / ul >
< p >
The < code > ${TOPDIR}< / code > directory holds:
< / p >
< ul >
< li > The top level < a href = "#topmakefile" > < code > Makefile< / code > < / a > that controls the NuttX build.
< / ul >
< p >
That directory also holds:
< / p >
< ul >
2008-02-07 15:41:11 +01:00
< li > The makefile fragment < a href = "#boardconfigsubdirs" > < code > .config< / code > < / a > that describes the current configuration.< / li >
< li > The makefile fragment < a href = "#boardconfigsubdirs" > < code > Make.defs< / code > < / a > that provides customized build targers, and< / li >
< li > The shell script < a href = "#boardconfigsubdirs" > < code > setenv.sh< / code > < / a > that sets up the configuration environment for the build.< / li >
2007-03-27 23:27:41 +02:00
< / ul >
< p >
2008-02-07 15:41:11 +01:00
The < a href = "#boardconfigsubdirs" > < code > setenv.sh< / code > < / a > contains Linux/Cygwin environmental settings that are needed for the build.
The specific environmental definitions are unique for each board but should include, as a minimum, updates to the < code > PATH< / code > variable to include the full path to the architecture-specific toolchain identified in < a href = "#boardconfigsubdirs" > < code > Make.defs< / code > < / a > .
The < a href = "#boardconfigsubdirs" > < code > setenv.sh< / code > < / a > only needs to be source'ed at the beginning of a session.
2007-03-27 23:27:41 +02:00
The system can be re-made subsequently by just typing < code > make< / code > .
< / p >
< p >
< b > First Time Make.< / b >
Additional configuration actions will be taken the first time that system is built.
These additional steps include:
< / p >
< ul >
< li > Auto-generating the file < code > include/nuttx/config.< / code > using the < code > ${TOPDIR}/.config< / code > file.
< li > Creating a link to < code > ${TOPDIR}/arch/< / code > < i > < arch-name> < / i > < code > /include< / code > at < code > ${TOPDIR}/include/arch< / code > .
< li > Creating a link to < code > ${TOPDIR}/configs/< / code > < i > < board-name> < / i > < code > /include< / code > at < code > ${TOPDIR}/include/arch/board< / code > .
< li > Creating a link to < code > ${TOPDIR}/configs/< / code > < i > < board-name> < / i > < code > /src< / code > at < code > ${TOPDIR}/arch/< / code > < i > < arch-name> < / i > < code > /src/board< / code >
< li > Creating make dependencies.
< / ul >
2007-02-18 00:21:28 +01:00
2007-03-19 23:45:58 +01:00
< h1 > 4.0 < a name = "ArchAPIs" > Architecture APIs< / a > < / h1 >
< p >
The file < code > include/nuttx/arch.h< / code > identifies by prototype all of the APIs that must
be provided by the architecture specific logic.
The internal OS APIs that architecture-specific logic must
interface with also also identified in < code > include/nuttx/arch.h< / code > or in
other header files.
< / p >
< h2 > < a name = "imports" > 4.1 APIs Exported by Architecture-Specific Logic to NuttX< / a > < / h2 >
< h3 > < a name = "upinitialize" > 4.1.1 < code > up_initialize()< / code > < / a > < / h3 >
< p > < b > Prototype< / b > : < code > void up_initialize(void);< / code > < / p >
< p > < b > Description< / b > .
< code > up_initialize()< / code > will be called once during OS
initialization after the basic OS services have been
initialized. The architecture specific details of
initializing the OS will be handled here. Such things as
setting up interrupt service routines, starting the
clock, and registering device drivers are some of the
things that are different for each processor and hardware
platform.
< / p >
< p >
< code > up_initialize()< / code > is called after the OS initialized but
before the init process has been started and before the
libraries have been initialized. OS services and driver
services are available.
< / p >
< h3 > < a name = "upidle" > 4.1.2 < code > up_idle()< / code > < / a > < / h3 >
< p > < b > Prototype< / b > : < code > void up_idle(void);< / code > < / p >
< p > < b > Description< / b > .
< code > up_idle()< / code > is the logic that will be executed
when their is no other ready-to-run task. This is processor
idle time and will continue until some interrupt occurs to
cause a context switch from the idle task.
< / p >
< p >
Processing in this state may be processor-specific. e.g.,
this is where power management operations might be performed.
< / p >
< h3 > < a name = "upinitialstate" > 4.1.3 < code > up_initial_state()< / code > < / a > < / h3 >
< p > < b > Prototype< / b > : < code > void up_initial_state(FAR _TCB *tcb);< / code > < / p >
< p > < b > Description< / b > .
A new thread is being started and a new TCB
has been created. This function is called to initialize
the processor specific portions of the new TCB.
< / p >
< p >
This function must setup the intial architecture registers
and/or stack so that execution will begin at tcb->start
on the next context switch.
< / p >
< h3 > < a name = "upcreatestack" > 4.1.4 < code > up_create_stack()< / code > < / a > < / h3 >
< p > < b > Prototype< / b > : < code > STATUS up_create_stack(FAR _TCB *tcb, size_t stack_size);< / code > < / p >
< p > < b > Description< / b > .
Allocate a stack for a new thread and setup
up stack-related information in the TCB.
< / p >
< p >
The following TCB fields must be initialized:
< / p >
< ul >
< li > < code > adj_stack_size< / code > : Stack size after adjustment for hardware,
processor, etc. This value is retained only for debug
purposes.< / li >
< li > < code > stack_alloc_ptr< / code > : Pointer to allocated stack< / li >
< li > < code > adj_stack_ptr< / code > : Adjusted < code > stack_alloc_ptr< / code > for HW. The
initial value of the stack pointer.
< / ul >
< p >
This API is < i > NOT< / i > required if < code > CONFIG_CUSTOM_STACK< / code >
is defined.
< / p >
< p > < b > Inputs< / b > :< /p?
< ul >
< li >
< code > tcb< / code > : The TCB of new task.
< / li >
< li >
< code > stack_size< / code > : The requested stack size. At least this much
must be allocated.
< / li >
< / ul >
< h3 > < a name = "upusestack" > 4.1.5 < code > up_use_stack()< / code > < / a > < / h3 >
< p > < b > Prototype< / b > :
< code > STATUS up_use_stack(FAR _TCB *tcb, FAR void *stack, size_t stack_size);< / code >
< / p >
< p > < b > Description< / b > .
Setup up stack-related information in the TCB
using pre-allocated stack memory.
< / p >
< p >
The following TCB fields must be initialized:
< / p >
< ul >
< li > < code > adj_stack_size< / code > : Stack size after adjustment for hardware,
processor, etc. This value is retained only for debug
purposes.< / li >
< li > < code > stack_alloc_ptr< / code > : Pointer to allocated stack< / li >
< li > < code > adj_stack_ptr< / code > : Adjusted < code > stack_alloc_ptr< / code > for HW. The
initial value of the stack pointer.
< / ul >
< p >
This API is < i > NOT< / i > required if < code > CONFIG_CUSTOM_STACK< / code >
is defined.
< / p >
< p > < b > Inputs:< / b > < / p >
< ul >
< li >
< code > tcb< / code > : The TCB of new task.
< / li >
< li >
< code > stack_size< / code > : The allocated stack size.
< / li >
< / ul >
< h3 > < a name = "upreleasestack" > 4.1.6 < code > up_release_stack()< / code > < / a > < / h3 >
< p > < b > Prototype< / b > : < code > void up_release_stack(FAR _TCB *dtcb);< / code > < / p >
< p > < b > Description< / b > .
A task has been stopped. Free all stack
related resources retained int the defunct TCB.
< / p >
< p >
This API is < i > NOT< / i > required if < code > CONFIG_CUSTOM_STACK< / code >
is defined.
< / p >
< h3 > < a name = "upunblocktask" > 4.1.7 < code > up_unblock_task()< / code > < / a > < / h3 >
< p > < b > Prototype< / b > : < code > void up_unblock_task(FAR _TCB *tcb);< / code > < / p >
< p > < b > Description< / b > .
A task is currently in an inactive task list
but has been prepped to execute. Move the TCB to the
ready-to-run list, restore its context, and start execution.
< / p >
< p >
This function is called only from the NuttX scheduling
logic. Interrupts will always be disabled when this
function is called.
< / p >
< p > < b > Inputs< / b > :
< ul >
< li > < code > tcb< / code > : Refers to the tcb to be unblocked. This tcb is
in one of the waiting tasks lists. It must be moved to
the ready-to-run list and, if it is the highest priority
ready to run taks, executed.
< / li >
< / ul >
< h3 > < a name = "upblocktask" > 4.1.8 < code > up_block_task()< / code > < / a > < / h3 >
< p > < b > Prototype< / b > : < code > void up_block_task(FAR _TCB *tcb, tstate_t task_state);< / code > < / p >
< p > < b > Description< / b > .
The currently executing task at the head of
the ready to run list must be stopped. Save its context
and move it to the inactive list specified by task_state.
This function is called only from the NuttX scheduling
logic. Interrupts will always be disabled when this
function is called.
< p > < b > Inputs:< / b > < / p >
< ul >
< li > < code > tcb< / code > : Refers to a task in the ready-to-run list (normally
2008-02-15 23:14:00 +01:00
the task at the head of the list). It most be
2007-03-19 23:45:58 +01:00
stopped, its context saved and moved into one of the
waiting task lists. It it was the task at the head
of the ready-to-run list, then a context to the new
ready to run task must be performed.
< / li >
< li > < code > task_state< / code > : Specifies which waiting task list should be
hold the blocked task TCB.
< / li >
< / ul >
< h3 > < a name = "upreleasepending" > 4.1.9 < code > up_release_pending()< / code > < / a > < / h3 >
< p > < b > Prototype< / b > : < code > void up_release_pending(void);< / code > < / p >
< p > < b > Description< / b > .
When tasks become ready-to-run but cannot run because pre-emption
is disabled, they are placed into a pending task list.
This function releases and makes ready-to-run all of the tasks that have
collected in the pending task list. This can cause a
context switch if a new task is placed at the head of
the ready to run list.
< / p >
< p >
This function is called only from the NuttX scheduling logic when
pre-emption is re-enabled. Interrupts will always be disabled when this
function is called.
< / p >
< h3 > < a name = "upreprioritizertr" > 4.1.10 < code > up_reprioritize_rtr()< / code > < / a > < / h3 >
< p > < b > Prototype< / b > : < code > void up_reprioritize_rtr(FAR _TCB *tcb, ubyte priority);< / code > < / p >
< p > < b > Description< / b > .
Called when the priority of a running or
ready-to-run task changes and the reprioritization will
cause a context switch. Two cases:
< / p >
< ol >
< li >
The priority of the currently running task drops and the next
task in the ready to run list has priority.
< / li >
< li >
An idle, ready to run task's priority has been raised above the
the priority of the current, running task and it now has the
priority.
< / li >
< / ol >
< p >
This function is called only from the NuttX scheduling
logic. Interrupts will always be disabled when this
function is called.
< / p >
< p > < b > Inputs:< / b > < / p >
< ul >
< li >
< code > tcb< / code > : The TCB of the task that has been reprioritized
< / li >
< li >
< code > priority< / code > : The new task priority
< / li >
< / ul >
< h3 > < a name = "_exit" > 4.1.11 < code > _exit()< / code > < / a > < / h3 >
< p > < b > Prototype< / b > : < code > void _exit(int status) noreturn_function;< / code > < / p >
< p > < b > Description< / b > .
This function causes the currently executing task to cease
to exist. This is a special case of task_delete().
< / p >
< p >
Unlike other UP APIs, this function may be called
directly from user programs in various states. The
implementation of this function should diable interrupts
before performing scheduling operations.
< / p >
< h3 > < a name = "upassert" > 4.1.12 < code > up_assert()< / code > < / a > < / h3 >
< p > < b > Prototype< / b > :< br >
< code > void up_assert(FAR const ubyte *filename, int linenum);< / code > < / br >
< code > void up_assert_code(FAR const ubyte *filename, int linenum, int error_code);< / code > < / br >
< / p >
< p > < b > Description< / b > .
Assertions may be handled in an architecture-specific
way.
< / p >
< h3 > < a name = "upschedulesigaction" > 4.1.13 < code > up_schedule_sigaction()< / code > < / a > < / h3 >
< p > < b > Prototype< / b > :
< code > void up_schedule_sigaction(FAR _TCB *tcb, sig_deliver_t sigdeliver);< / code >
< / p >
< p > < b > Description< / b > .
This function is called by the OS when one or more
signal handling actions have been queued for execution.
The architecture specific code must configure things so
that the 'igdeliver' callback is executed on the thread
specified by 'tcb' as soon as possible.
< / p >
< p >
This function may be called from interrupt handling logic.
< / p >
< p >
This operation should not cause the task to be unblocked
nor should it cause any immediate execution of sigdeliver.
Typically, a few cases need to be considered:
< / p >
< ol >
< li >
This function may be called from an interrupt handler
During interrupt processing, all xcptcontext structures
should be valid for all tasks. That structure should
be modified to invoke sigdeliver() either on return
from (this) interrupt or on some subsequent context
switch to the recipient task.
< / li >
< li >
If not in an interrupt handler and the tcb is NOT
the currently executing task, then again just modify
the saved xcptcontext structure for the recipient
task so it will invoke sigdeliver when that task is
later resumed.
< / li >
< li >
If not in an interrupt handler and the tcb IS the
currently executing task -- just call the signal
handler now.
< / li >
< / ol >
< p >
This API is < i > NOT< / i > required if < code > CONFIG_DISABLE_SIGNALS< / code >
is defined.
< / p >
< h3 > < a name = "upallocateheap" > 4.1.14 < code > up_allocate_heap()< / code > < / a > < / h3 >
< p > < b > Prototype< / b > : < code > void up_allocate_heap(FAR void **heap_start, size_t *heap_size);< / code > < / p >
< p > < b > Description< / b > .
The heap may be statically allocated by
defining CONFIG_HEAP_BASE and CONFIG_HEAP_SIZE. If these
are not defined, then this function will be called to
dynamically set aside the heap region.
< / p >
< p >
This API is < i > NOT< / i > required if < code > CONFIG_HEAP_BASE< / code >
is defined.
< / p >
< h3 > < a name = "upinterruptcontext" > 4.1.15 < code > up_interrupt_context()< / code > < / a > < / h3 >
< p > < b > Prototype< / b > : < code > boolean up_interrupt_context(void)< / code > < / p >
< p > < b > Description< / b > .
Return TRUE is we are currently executing in
the interrupt handler context.
< / p >
< h3 > < a name = "updisableirq" > 4.1.16 < code > up_disable_irq()< / code > < / a > < / h3 >
< p > < b > Prototype< / b > : < code > void up_disable_irq(int irq);< / code > < / p >
< p > < b > Description< / b > .
Disable the IRQ specified by 'irq'
< / p >
< h3 > < a name = "upenableirq" > 4.1.17 < code > up_enable_irq()< / code > < / a > < / h3 >
< p > < b > Prototype< / b > : < code > void up_enable_irq(int irq);< / code > < / p >
< p > < b > Description< / b > .
Enable the IRQ specified by 'irq'
< / p >
< h3 > < a name = "upputc" > 4.1.18 < code > up_putc()< / code > < / a > < / h3 >
< p > < b > Prototype< / b > : < code > int up_putc(int ch);< / code > < / p >
< p > < b > Description< / b > .
This is a debug interface exported by the architecture-specific logic.
Output one character on the console
< p >
This API is < i > NOT< / i > required if < code > CONFIG_HEAP_BASE< / code >
is defined.
< / p >
< h2 > < a name = "exports" > 4.2 APIs Exported by NuttX to Architecture-Specific Logic< / a > < / h2 >
< p >
These are standard interfaces that are exported by the OS
for use by the architecture specific logic.
< / p >
< h3 > < a name = "osstart" > 4.2.1 < code > os_start()< / code > < / a > < / h3 >
< p >
< b > < i > To be provided< / i > < / b >
< / p >
< h3 > < a name = "listmgmt" > 4.2.2 OS List Management APIs< / a > < / h3 > < / h3 >
< p >
< b > < i > To be provided< / i > < / b >
< / p >
< h3 > < a name = "schedprocesstimer" > 4.2.3 < code > sched_process_timer()< / code > < / a > < / h3 >
< p > < b > Prototype< / b > : < code > void sched_process_timer(void);< / code > < / p >
< p > < b > Description< / b > .
This function handles system timer events.
The timer interrupt logic itself is implemented in the
architecture specific code, but must call the following OS
function periodically -- the calling interval must be
< code > MSEC_PER_TICK< / code > .
< / p >
< h3 > < a name = "irqdispatch" > 4.2.4 < code > irq_dispatch()< / code > < / a > < / h3 >
< p > < b > Prototype< / b > : < code > void irq_dispatch(int irq, FAR void *context);< / code > < / p >
< p > < b > Description< / b > .
This function must be called from the achitecture-
specific logic in order to dispaly an interrupt to
the appropriate, registered handling logic.
< / p >
2007-12-10 18:15:11 +01:00
< h1 > < a name = "NxFileSystem" > 5.0 NuttX File System< / a > < / h1 >
< p > < b > Overview< / b > .
NuttX includes an optional, scalable file system.
This file-system may be omitted altogther; NuttX does not depend on the presence
of any file system.
< / p >
< p > < b > Pseudo Root File System< / b > .
Or, a simple < i > in-memory< / i > , < i > psuedo< / i > file system can be enabled.
This simple file system can be enabled setting the CONFIG_NFILE_DESCRIPTORS
option to a non-zero value (see < a href = "#apndxconfigs" > Appendix A< / a > ).
This is an < i > in-memory< / i > file system because it does not require any
storage medium or block driver support.
Rather, file system contents are generated on-the-fly as referenced via
standard file system operations (open, close, read, write, etc.).
In this sense, the file system is < i > psuedo< / i > file system (in the
same sense that the Linux < code > /proc< / code > file system is also
referred to as a psuedo file system).
< / p >
< p >
Any user supplied data or logic can be accessed via the psuedo-file system.
Built in support is provided for character and block drivers in the
< code > /dev< / code > psuedo file system directory.
< / p >
< p > < b > Mounted File Systems< / b >
The simple in-memory file system can be extended my mounting block
devices that provide access to true file systems backed up via some
mass storage device.
NuttX supports the standard < code > mount()< / code > command that allows
a block driver to be bound to a mountpoint within the psuedo file system
and to a a file system.
At present, NuttX supports only the VFAT file system.
< / p >
< p > < b > Comparison to Linux< / b >
From a programming perspective, the NuttX file system appears very similar
to a Linux file system.
However, there is a fundamental difference:
The NuttX root file system is a psuedo file system and true file systems may be
mounted in the psuedo file system.
In the typical Linux installation by comparison, the Linux root file system
is a true file system and psuedo file systems may be mounted in the true,
root file system.
The approach selected by NuttX is intended to support greater scalability
from the very tiny platform to the moderate platform.
< / p >
2007-03-19 23:45:58 +01:00
< h1 > < a name = "apndxconfigs" > Appendix A: NuttX Configuration Settings< / a > < / h1 >
< p >
The following variables are recognized by the build (you may
also include architecture-specific settings).
< / p >
< h2 > Architecture selection< / h2 >
2007-04-28 22:07:05 +02:00
< p >
The following configuration itemes select the architecture, chip, and
board configuration for the build.
< / p >
2007-03-19 23:45:58 +01:00
< ul >
2007-04-25 02:09:44 +02:00
< li > < code > CONFIG_ARCH< / code > :
Identifies the arch subdirectory< / li >
< li > < code > CONFIG_ARCH_name< / code > :
For use in C code< / li >
< li > < code > CONFIG_ARCH_CHIP< / code > :
Identifies the arch/*/chip subdirectory< / li >
< li > < code > CONFIG_ARCH_CHIP_name< / code > :
For use in C code< / li >
< li > < code > CONFIG_ARCH_BOARD< / code > :
Identifies the configs subdirectory and hence, the board that supports
the particular chip or SoC.< / li >
< li > < code > CONFIG_ARCH_BOARD_name< / code > :
For use in C code< / li >
2007-05-12 22:11:20 +02:00
< li > < code > CONFIG_ENDIAN_BIG< / code > :
Define if big endian (default is little endian).< / li >
2008-11-07 17:59:36 +01:00
< li > < code > CONFIG_ARCH_NOINTC< / code > :
Define if the architecture does not support an interrupt controller
or otherwise cannot support APIs like up_enable_irq() and up_disable_irq().< / li >
< li > < code > CONFIG_ARCH_IRQPRIO< / code > :
Define if the architecture suports prioritizaton of interrupts and the
up_prioritize_irq() API.< / li >
2007-03-19 23:45:58 +01:00
< / ul >
2007-04-28 22:07:05 +02:00
< p >
2008-02-15 23:14:00 +01:00
Some architectures require a description of the RAM configuration:
2007-04-28 22:07:05 +02:00
< / p >
< ul >
< li > < code > CONFIG_DRAM_SIZE< / code > :
Describes the installed DRAM.< / li >
< li > < code > CONFIG_DRAM_START< / code > :
The start address of DRAM (physical)< / li >
< li > < code > CONFIG_DRAM_VSTART< / code > :
2008-02-15 23:14:00 +01:00
The start address of DRAM (virtual)< / li >
2007-04-28 22:07:05 +02:00
< / ul >
2008-01-06 21:46:45 +01:00
< p >
General build options:
< / p >
< ul >
< li > < code > CONFIG_RRLOAD_BINARY< / code > :
2008-09-16 23:45:41 +02:00
Make the rrload binary format used with BSPs from < a href = "www.ridgerun.com" > ridgerun.com< / a >
using the < code > tools/mkimage.sh< / code > script.< / li >
2008-11-05 23:16:22 +01:00
< li > < code > CONFIG_INTELHEX_BINARY< / code > :
2008-09-16 23:45:41 +02:00
Make the Intel HEX binary format used with many different loaders using the GNU objcopy program
2008-09-18 01:14:42 +02:00
This option hould not be selected if you are not using the GNU toolchain.< / li >
2008-11-05 23:16:22 +01:00
< li > < code > CONFIG_MOTOROLA_SREC< / code > :
Make the Motorola S-Record binary format used with many different loaders using the GNU objcopy program
Should not be selected if you are not using the GNU toolchain.< / li >
< li > < code > CONFIG_RAW_BINARY< / code > :
2008-09-18 01:14:42 +02:00
mmke a raw binary format file used with many different loaders using the GNU objcopy program.
This option should not be selected if you are not using the GNU toolchain.< / li >
2008-11-05 23:16:22 +01:00
< li > < code > CONFIG_HAVE_LIBM< / code > :
2008-01-06 21:46:45 +01:00
Toolchain supports libm.a< / li >
< / ul >
2007-03-19 23:45:58 +01:00
< h2 > General OS setup< / h2 >
< ul >
< li >
< code > CONFIG_EXAMPLE< / code > : identifies the subdirectory in examples
that will be used in the build.
< / li >
< li >
< code > CONFIG_DEBUG< / code > : enables built-in debug options
< / li >
2007-11-24 14:59:57 +01:00
< li >
< code > CONFIG_DEBUG_VERBOSE< / code > : enables verbose debug output
< / li >
2007-11-23 23:32:52 +01:00
< li >
< code > CONFIG_DEBUG_SCHED< / code > : enable OS debug output (disabled by default)
< / li >
< li >
< code > CONFIG_DEBUG_MM< / code > : enable memory management debug output (disabld by default)
< / li >
< li >
2007-11-24 14:59:57 +01:00
< code > CONFIG_DEBUG_NET< / code > : enable network debug output (disabled by default)
2007-11-23 23:32:52 +01:00
< / li >
2007-03-19 23:45:58 +01:00
< li >
2007-12-10 18:15:11 +01:00
< code > CONFIG_DEBUG_FS< / code > : enable file system debug output (disabled by default)
2007-11-24 14:59:57 +01:00
< / li >
< li >
< code > CONFIG_DEBUG_LIB< / code > : enable C library debug output (disabled by default)
2007-03-19 23:45:58 +01:00
< / li >
< li >
2008-02-20 13:55:07 +01:00
< code > CONFIG_ARCH_LOWPUTC< / code > : architecture supports low-level, boot
2007-03-19 23:45:58 +01:00
time console output
< / li >
< li >
< code > CONFIG_MM_REGIONS< / code > : If the architecture includes multiple
regions of memory to allocate from, this specifies the
number of memory regions that the memory manager must
handle and enables the API mm_addregion(start, end);
< / li >
2007-06-09 17:49:44 +02:00
< li >
< code > CONFIG_TICKS_PER_MSEC< / code > : The default system timer is 100Hz
or < code > TICKS_PER_MSEC< / code > =10. This setting may be defined to inform NuttX
that the processor hardware is providing system timer interrupts at some interrupt
interval other than 10 msec.
< / li >
2007-03-19 23:45:58 +01:00
< li >
< code > CONFIG_RR_INTERVAL< / code > : The round robin timeslice will be set
this number of milliseconds; Round robin scheduling can
be disabled by setting this value to zero.
< / li >
< li >
< code > CONFIG_SCHED_INSTRUMENTATION< / code > : enables instrumentation in
scheduler to monitor system performance
< / li >
< li >
< code > CONFIG_TASK_NAME_SIZE< / code > : Spcifies that maximum size of a
task name to save in the TCB. Useful if scheduler
instrumentation is selected. Set to zero to disable.
< / li >
< li >
< code > CONFIG_START_YEAR, CONFIG_START_MONTH, CONFIG_START_DAY -
Used to initialize the internal time logic.
< / li >
< li >
< code > CONFIG_JULIAN_TIME< / code > : Enables Julian time conversions
< / li >
< li >
< code > CONFIG_DEV_CONSOLE< / code > : Set if architecture-specific logic
provides /dev/console. Enables stdout, stderr, stdin.
< / li >
2008-05-31 19:13:08 +02:00
< li >
< code > CONFIG_MUTEX_TYPES< / code > : Set to enabled support for recursive and
errorcheck mutexes. Enables < code > pthread_mutexattr_settype()< / code > .
2007-03-19 23:45:58 +01:00
< / ul >
< p >
The following can be used to disable categories of APIs supported
by the OS. If the compiler supports weak functions, then it
should not be necessary to disable functions unless you want to
restrict usage of those APIs.
< / p >
< p >
There are certain dependency relationships in these features.
< / p >
< ul >
< li >
< code > mq_notify()< / code > logic depends on signals to awaken tasks
waiting for queues to become full or empty.
< / li >
< li >
< code > pthread_condtimedwait()< / code > depends on signals to wake
up waiting tasks.
< / li >
< / ul >
< ul >
2007-05-26 21:22:34 +02:00
< code > CONFIG_DISABLE_CLOCK< / code > , < code > CONFI_DISABLE_POSIX_TIMERS< / code > ,
< code > CONFIG_DISABLE_PTHREAD< / code > , < code > CONFIG_DISABLE_SIGNALS< / code > ,
< code > CONFIG_DISABLE_MQUEUE< / code > , < code > CONFIG_DISABLE_MOUNTPOUNT< / code >
2007-03-19 23:45:58 +01:00
< / ul >
< h2 > Miscellaneous libc settings< / h2 >
< ul >
< li >
< code > CONFIG_NOPRINTF_FIELDWIDTH< / code > : sprintf-related logic is a
little smaller if we do not support fieldwidthes
< / li >
< / ul >
< h2 > Allow for architecture optimized implementations< / h2 >
< p >
The architecture can provide optimized versions of the
following to improve sysem performance.
< / p >
< ul >
< p >
< code > CONFIG_ARCH_MEMCPY< / code > , < code > CONFIG_ARCH_MEMCMP< / code > , < code > CONFIG_ARCH_MEMMOVE< / code > ,
< code > CONFIG_ARCH_MEMSET< / code > , < code > CONFIG_ARCH_STRCMP< / code > , < code > CONFIG_ARCH_STRCPY< / code > ,
< code > CONFIG_ARCH_STRNCPY< / code > , < code > CONFIG_ARCH_STRLEN< / code > , < code > CONFIG_ARCH_BZERO< / code > ,
< code > CONFIG_ARCH_KMALLOC< / code > , < code > CONFIG_ARCH_KZMALLOC< / code > , < code > ONFIG_ARCH_KFREE< / code > ,
< / p >
< / ul >
< h2 > Sizes of configurable things (0 disables)< / h2 >
< ul >
< li >
< code > CONFIG_MAX_TASKS< / code > : The maximum number of simultaneously
active tasks. This value must be a power of two.
< / li >
< li >
< code > CONFIG_NPTHREAD_KEYS< / code > : The number of items of thread-
specific data that can be retained
< / li >
< li >
< code > CONFIG_NFILE_DESCRIPTORS< / code > : The maximum number of file
descriptors (one for each open)
< / li >
< li >
< code > CONFIG_NFILE_STREAMS< / code > : The maximum number of streams that
can be fopen'ed
< / li >
< li >
< code > CONFIG_NAME_MAX< / code > : The maximum size of a file name.
< / li >
< li >
< code > CONFIG_STDIO_BUFFER_SIZE< / code > : Size of the buffer to allocate
on fopen. (Only if CONFIG_NFILE_STREAMS > 0)
< / li >
< li >
< code > CONFIG_NUNGET_CHARS< / code > : Number of characters that can be
buffered by ungetc() (Only if CONFIG_NFILE_STREAMS > 0)
< / li >
< li >
< code > CONFIG_PREALLOC_MQ_MSGS< / code > : The number of pre-allocated message
structures. The system manages a pool of preallocated
message structures to minimize dynamic allocations
< / li >
< li >
< code > CONFIG_MQ_MAXMSGSIZE< / code > : Message structures are allocated with
a fixed payload size given by this settin (does not include
other message structure overhead.
< / li >
< li >
< code > CONFIG_PREALLOC_WDOGS< / code > : The number of pre-allocated watchdog
structures. The system manages a pool of preallocated
watchdog structures to minimize dynamic allocations
< / li >
2008-07-22 02:52:07 +02:00
< li >
2008-07-26 16:02:46 +02:00
< code > CONFIG_DEV_PIPE_SIZE< / code > : Size, in bytes, of the buffer to allocated
for pipe and FIFO support (default is 1024).
2008-07-22 02:52:07 +02:00
< / li >
2007-03-19 23:45:58 +01:00
< / ul >
2008-09-10 21:29:24 +02:00
< h2 > File Systems< / h2 >
< ul >
< li >
< code > CONFIG_FS_FAT< / code > : Enable FAT filesystem support.
< / li >
< li >
< code > CONFIG_FAT_SECTORSIZE< / code > : Max supported sector size.
< / li >
< li >
< code > CONFIG_FS_ROMFS< / code > : Enable ROMFS filesystem support
< / li >
< / ul >
2008-11-28 17:07:54 +01:00
< h2 > SPI-based MMC/SD driver< / h2 >
2008-10-23 22:51:26 +02:00
< ul >
< li >
< code > CONFIG_MMCSD_NSLOTS< / code > : Number of MMC/SD slots supported by the driver. Default is one.
< / li >
< li >
< code > CONFIG_MMCSD_READONLY< / code > : Provide read-only access. Default is Read/Write
< / li >
< / ul >
2007-08-27 01:18:13 +02:00
< h2 > Network Support< / h2 >
2007-09-01 20:06:15 +02:00
< h3 > TCP/IP and UDP support via uIP< / h2 >
2007-08-27 01:18:13 +02:00
< ul >
< li >
2007-09-01 20:06:15 +02:00
< code > CONFIG_NET< / code > : Enable or disable all network features
2007-08-27 01:18:13 +02:00
< / li >
< li >
2007-09-01 20:06:15 +02:00
< code > CONFIG_NET_IPv6< / code > : Build in support for IPv6
2007-08-27 01:18:13 +02:00
< / li >
< li >
2007-09-01 20:06:15 +02:00
< code > CONFIG_NSOCKET_DESCRIPTORS< / code > : Maximum number of socket descriptors per task/thread.
2007-08-27 01:18:13 +02:00
< / li >
2008-09-01 15:59:54 +02:00
< li >
< code > CONFIG_NET_NACTIVESOCKETS< / code > : Maximum number of concurrent socket operations (recv, send, etc.).
Default: < code > CONFIG_NET_TCP_CONNS< / code > +< code > CONFIG_NET_UDP_CONNS< / code > .
< / li >
2007-08-27 01:18:13 +02:00
< li >
2007-11-22 19:36:46 +01:00
< code > CONFIG_NET_SOCKOPTS< / code > : Enable or disable support for socket options.
2007-08-27 01:18:13 +02:00
< / li >
< li >
2007-11-22 19:36:46 +01:00
< code > CONFIG_NET_BUFSIZE< / code > : uIP buffer size
2007-09-08 21:50:59 +02:00
< / li >
< li >
2007-11-22 19:36:46 +01:00
< code > CONFIG_NET_TCP< / code > : TCP support on or off
2007-08-27 01:18:13 +02:00
< / li >
< li >
2007-11-22 19:36:46 +01:00
< code > CONFIG_NET_TCP_CONNS< / code > : Maximum number of TCP connections (all tasks).
2007-11-20 00:09:39 +01:00
< / li >
2008-11-20 20:24:06 +01:00
< li >
< code > CONFIG_NET_TCPBACKLOG< / code > :
Incoming connections pend in a backlog until < code > accept()< / code > is called.
The size of the backlog is selected when < code > listen()< / code > is called.
< / li >
2007-11-20 00:09:39 +01:00
< li >
< code > CONFIG_NET_TCP_READAHEAD_BUFSIZE< / code > : Size of TCP read-ahead buffers
< / li >
< li >
< code > CONFIG_NET_NTCP_READAHEAD_BUFFERS< / code > : Number of TCP read-ahead buffers (may be zero)
2007-08-27 01:18:13 +02:00
< / li >
2007-11-22 19:36:46 +01:00
< li >
< code > CONFIG_NET_MAX_LISTENPORTS< / code > : Maximum number of listening TCP ports (all tasks).
< / li >
2007-11-22 15:42:52 +01:00
< li >
< code > CONFIG_NET_TCPURGDATA< / code > : Determines if support for TCP urgent data
notification should be compiled in. Urgent data (out-of-band data)
is a rarely used TCP feature that is very seldom would be required.
< / li >
2007-08-27 01:18:13 +02:00
< li >
2007-09-01 20:06:15 +02:00
< code > CONFIG_NET_UDP< / code > : UDP support on or off
2007-08-27 01:18:13 +02:00
< / li >
< li >
2007-09-01 20:06:15 +02:00
< code > CONFIG_NET_UDP_CHECKSUMS< / code > : UDP checksums on or off
2007-08-27 01:18:13 +02:00
< / li >
< li >
2007-09-01 20:06:15 +02:00
< code > CONFIG_NET_UDP_CONNS< / code > : The maximum amount of concurrent UDP connections
2007-08-27 01:18:13 +02:00
< / li >
< li >
2008-09-02 22:42:01 +02:00
< code > CONFIG_NET_ICMP< / code > : Enable minimal ICMP support. Includes built-in support
for sending replies to received ECHO (ping) requests.
< / li >
< li >
< code > CONFIG_NET_ICMP_PING< / code > : Provide interfaces to support application level
support for sending ECHO (ping) requests and associating ECHO replies.
2007-08-27 01:18:13 +02:00
< / li >
< li >
2007-09-01 20:06:15 +02:00
< code > CONFIG_NET_PINGADDRCONF< / code > : Use "ping" packet for setting IP address
2007-08-27 01:18:13 +02:00
< / li >
2007-11-22 19:36:46 +01:00
< li >
< code > CONFIG_NET_STATISTICS< / code > : uIP statistics on or off
< / li >
2007-08-27 01:18:13 +02:00
< li >
2007-09-01 20:06:15 +02:00
< code > CONFIG_NET_RECEIVE_WINDOW< / code > : The size of the advertised receiver's window
2007-08-27 01:18:13 +02:00
< / li >
< li >
2007-09-01 20:06:15 +02:00
< code > CONFIG_NET_ARPTAB_SIZE< / code > : The size of the ARP table
2007-08-27 01:18:13 +02:00
< / li >
< li >
2008-11-26 14:39:09 +01:00
< code > CONFIG_NET_BROADCAST< / code > : Incoming UDP broadcast support
< / li >
< li >
< code > CONFIG_NET_MULTICAST< / code > : Outgoing multi-cast address support
2007-08-27 01:18:13 +02:00
< / li >
< li >
2007-09-01 20:06:15 +02:00
< code > CONFIG_NET_LLH_LEN< / code > : The link level header length
2007-08-27 01:18:13 +02:00
< / li >
2007-09-01 20:06:15 +02:00
< li >
< code > CONFIG_NET_FWCACHE_SIZE< / code > : number of packets to remember when looking for duplicates
2007-08-27 01:18:13 +02:00
< / li >
< / ul >
< h3 > UIP Network Utilities< / h3 >
< ul >
< li >
2007-09-01 20:06:15 +02:00
< code > CONFIG_NET_DHCP_LIGHT< / code > : Reduces size of DHCP
2007-08-27 01:18:13 +02:00
< / li >
< li >
2007-09-01 20:06:15 +02:00
< code > CONFIG_NET_RESOLV_ENTRIES< / code > : Number of resolver entries
2007-08-27 01:18:13 +02:00
< / li >
< / ul >
2008-10-09 14:49:11 +02:00
< h2 > USB Device-Side Support< / h2 >
< h3 > USB Device Controller Driver< / h3 >
2008-10-02 02:29:05 +02:00
< ul >
< li >
< code > CONFIG_USBDEV< / code > : Enables USB device support
< / li >
< li >
< code > CONFIG_USBDEV_ISOCHRONOUS< / code > : Build in extra support for isochronous endpoints
< / li >
< li >
< code > CONFIG_USBDEV_DUALSPEED< / code > : Hardware handles high and full speed operation (USB 2.0)
< / li >
< li >
< code > CONFIG_USBDEV_SELFPOWERED< / code > : Will cause USB features to indicate that the device is self-powered
< / li >
< li >
< code > CONFIG_USBDEV_MAXPOWER< / code > : Maximum power consumption in mA
< / li >
< li >
< code > CONFIG_USBDEV_TRACE< / code > : Enables USB tracing for debug
< / li >
< li >
< code > CONFIG_USBDEV_TRACE_NRECORDS< / code > : Number of trace entries to remember
< / li >
< / ul >
2008-10-09 14:49:11 +02:00
< h3 > USB Serial Device Class Driver< / h3 >
< ul >
2008-10-23 22:51:26 +02:00
< li >
< code > CONFIG_USBSER< / code > : Enable compilation of the USB serial driver
< / li >
2008-10-09 14:49:11 +02:00
< li >
< code > CONFIG_USBSER_EPINTIN< / code > : The logical 7-bit address of a hardware endpoint that supports interrupt IN operation
< / li >
< li >
< code > CONFIG_USBSER_EPBULKOUT< / code > : The logical 7-bit address of a hardware endpoint that supports bulk OUT operation
< / li >
< li >
< code > CONFIG_USBSER_EPBULKIN< / code > : The logical 7-bit address of a hardware endpoint that supports bulk IN operation
< / li >
< li >
< code > CONFIG_USBSER_NWRREQS< / code > and < code > CONFIG_USBSER_NRDREQS< / code > : The number of write/read requests that can be in flight
< / li >
< li >
< code > CONFIG_USBSER_VENDORID< / code > and < code > CONFIG_USBSER_VENDORSTR< / code > : The vendor ID code/string
< / li >
< li >
< code > CONFIG_USBSER_PRODUCTID< / code > and < code > CONFIG_USBSER_PRODUCTSTR< / code > : The product ID code/string
< / li >
< li >
< code > CONFIG_USBSER_RXBUFSIZE< / code > and < code > CONFIG_USBSER_TXBUFSIZE< / code > : Size of the serial receive/transmit buffers
< / li >
< / ul >
2008-10-23 00:03:47 +02:00
< h3 > USB Storage Device Configuration< / h3 >
< ul >
2008-10-23 22:51:26 +02:00
< li >
< code > CONFIG_USBSTRG< / code > :
Enable compilation of the USB storage driver
< / li >
2008-10-23 00:03:47 +02:00
< li >
< code > CONFIG_USBSTRG_EP0MAXPACKET< / code > :
Max packet size for endpoint 0
< / li >
< li >
< code > CONFIG_USBSTRGEPBULKOUT< / code > and < code > CONFIG_USBSTRG_EPBULKIN< / code > :
The logical 7-bit address of a hardware endpoints that support bulk OUT and IN operations
< / li >
< li >
< code > CONFIG_USBSTRG_NWRREQS< / code > and < code > CONFIG_USBSTRG_NRDREQS< / code > :
The number of write/read requests that can be in flight
< / li >
< li >
< code > CONFIG_USBSTRG_BULKINREQLEN< / code > and < code > CONFIG_USBSTRG_BULKOUTREQLEN< / code > :
The size of the buffer in each write/read request.
This value needs to be at least as large as the endpoint maxpacket and
ideally as large as a block device sector.
< / li >
< li >
< code > CONFIG_USBSTRG_VENDORID< / code > and < code > CONFIG_USBSTRG_VENDORSTR< / code > :
The vendor ID code/string
< / li >
< li >
< code > CONFIG_USBSTRG_PRODUCTID< / code > and < code > CONFIG_USBSTRG_PRODUCTSTR< / code > :
The product ID code/string
< / li >
< li >
< code > CONFIG_USBSTRG_REMOVABLE< / code > :
Select if the media is removable
< / li >
< / ul >
2008-11-28 17:07:54 +01:00
< h2 > Graphics related configuration settings< / h3 >
< ul >
< li >
2008-12-05 15:04:37 +01:00
< code > CONFIG_NX< / code >
2008-11-28 17:07:54 +01:00
Enables overall support for graphics library and NX
< / li >
< / ul >
< h3 > NX configuration setting< / h3 >
< ul >
< li >
2008-12-05 15:04:37 +01:00
< code > CONFIG_NX_MULTIUSER< / code > :
Configures NX in multi-user mode.
2008-11-28 17:07:54 +01:00
< / li >
< li >
2008-12-05 15:04:37 +01:00
< code > CONFIG_NX_NPLANES< / code > :
2008-11-28 17:07:54 +01:00
Some YUV color formats requires support for multiple planes,
one for each color component. Unless you have such special
2008-12-05 15:04:37 +01:00
hardware, this value should be undefined or set to 1.
2008-11-28 17:07:54 +01:00
< / li >
< li >
2008-12-05 15:04:37 +01:00
< code > CONFIG_NX_DISABLE_1BPP< / code > , < code > CONFIG_NX_DISABLE_2BPP< / code > ,
< code > CONFIG_NX_DISABLE_4BPP< / code > , < code > CONFIG_NX_DISABLE_8BPP< / code >
< code > CONFIG_NX_DISABLE_16BPP< / code > , < code > CONFIG_NX_DISABLE_24BPP< / code > , and
< code > CONFIG_NX_DISABLE_32BPP< / code > :
2008-11-28 17:07:54 +01:00
NX supports a variety of pixel depths. You can save some
memory by disabling support for unused color depths.
< / li >
< li >
2008-12-05 15:04:37 +01:00
< code > CONFIG_NX_PACKEDMSFIRST< / code > :
2008-11-28 17:07:54 +01:00
If a pixel depth of less than 8-bits is used, then NX needs
to know if the pixels pack from the MS to LS or from LS to MS
< / li >
< li >
2008-12-05 15:04:37 +01:00
< code > CONFIG_NX_MOUSE< / code > :
Build in support for mouse input.
2008-11-28 17:07:54 +01:00
< / li >
< li >
2008-12-05 15:04:37 +01:00
< code > CONFIG_NX_KBD< / code > :
Build in support of keypad/keyboard input.
< / li >
< li >
< code > CONFIG_NXTK_BORDERWIDTH< / code > :
Specifies with with of the border (in pixels) used with
framed windows. The default is 4.
< / li >
< li >
< code > CONFIG_NXTK_BORDERCOLOR1< / code > and < code > CONFIG_NXTK_BORDERCOLOR2< / code > :
Specify the colors of the border used with framed windows.
< code > CONFIG_NXTK_BORDERCOLOR2< / code > is the shadow side color and so
is normally darker. The default is medium and dark grey,
respectively
< / li >
< li >
< code > CONFIG_NXTK_AUTORAISE< / code > :
If set, a window will be raised to the top if the mouse position
is over a visible portion of the window. Default: A mouse
button must be clicked over a visible portion of the window.
< / li >
< li >
< code > CONFIG_NXFONTS_CHARBITS< / code > :
The number of bits in the character set. Current options are
only 7 and 8. The default is 7.
< / li >
< li >
< code > CONFIG_NXFONT_SANS< / code > :
At present, there is only one font. But if there were were more,
then this option would select the sans serif font.
2008-11-28 17:07:54 +01:00
< / li >
< / ul >
< h3 > NX Multi-user only options< / h3 >
< ul >
< li >
< code > CONFIG_NX_BLOCKING< / code >
Open the client message queues in blocking mode. In this case,
2008-12-05 15:04:37 +01:00
< code > nx_eventhandler()< / code > will not return until a message is received and processed.
2008-11-28 17:07:54 +01:00
< / li >
< li >
< code > CONFIG_NX_MXSERVERMSGS< / code > and < code > CONFIG_NX_MXCLIENTMSGS< / code >
Specifies the maximum number of messages that can fit in
the message queues. No additional resources are allocated, but
this can be set to prevent flooding of the client or server with
too many messages (< code > CONFIG_PREALLOC_MQ_MSGS< / code > controls how many
messages are pre-allocated).
< / li >
< / ul >
2007-03-19 23:45:58 +01:00
< h2 > Stack and heap information< / h2 >
< ul >
< li >
< code > CONFIG_BOOT_FROM_FLASH< / code > : Some configurations support XIP
operation from FLASH.
< / li >
< li >
< code > CONFIG_STACK_POINTER< / code > : The initial stack pointer
< / li >
< li >
2008-11-13 22:13:53 +01:00
< code > CONFIG_IDLETHREAD_STACKSIZE< / code > : The size of the initial stack.
This is the thread that (1) performs the inital boot of the system up
to the point where user_start() is spawned, and (2) there after is the
IDLE thread that executes only when there is no other thread ready to
run.
< / li >
< li >
< code > CONFIG_USERMAIN_STACKSIZE< / code > : The size of the stack to allocate
for the main user thread that begins at the user_start() entry point.
2007-03-19 23:45:58 +01:00
< / li >
< li >
< code > CONFIG_PTHREAD_STACK_MIN< / code > : Minimum pthread stack size
< / li >
< li >
< code > CONFIG_PTHREAD_STACK_DEFAULT< / code > : Default pthread stack size
< / li >
< li >
< code > CONFIG_HEAP_BASE< / code > : The beginning of the heap
< / li >
< li >
< code > CONFIG_HEAP_SIZE< / code > : The size of the heap
< / li >
< / ul >
2008-02-07 15:41:11 +01:00
< h1 > < a name = "apndxtrademarks" > Appendix B: Trademarks< / a > < / h1 >
< li > ARM, ARM7 ARM7TDMI, ARM9, ARM926EJS are trademarks of Advanced RISC Machines, Limited.< / li >
< li > Cygwin is a trademark of Red Hat, Incorporated.< / li >
< li > Linux is a registered trademark of Linus Torvalds.< / li >
< li > LPC2148 is a trademark of NXP Semiconductors.< / li >
< li > TI is a tradename of Texas Instruments Incorporated.< / li >
< li > UNIX is a registered trademark of The Open Group.< / li >
< li > VxWorks is a registered trademark of Wind River Systems, Incorporated.< / li >
< li > ZDS, ZNEO, Z16F, Z80, and Zilog are a registered trademark of Zilog, Inc.< / li >
< p >
NOTE: NuttX is < i > not< / i > licensed to use the POSIX trademark. NuttX uses the POSIX
standard as a development guideline only.
< / p >
2007-02-18 00:21:28 +01:00
< / body >
< / html >
