convert Kwikstik K40 configurations to use kconfig-frontends tools

git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5784 42af7a65-404d-4744-a932-0658087f49c3

configs/kwikstik-k40/README.txt

@@ -524,7 +524,22 @@ Where <subdir> is one of the following:
   ostest:
   ------
     This configuration directory, performs a simple OS test using
-    examples/ostest.  By default, this project assumes that you are
-    using the DFU bootloader.
+    examples/ostest.
 
-    CONFIG_KINETIS_BUILDROOT=y      : NuttX buildroot under Linux or Cygwin
+    NOTES:
+
+    1. This configuration uses the mconf-based configuration tool.  To
+       change this configuration using that tool, you should:
+
+       a. Build and install the kconfig-mconf tool.  See nuttx/README.txt
+          and misc/tools/
+
+       b. Execute 'make menuconfig' in nuttx/ in order to start the
+          reconfiguration process.
+
+    2. Default platform/toolchain:
+
+       CONFIG_HOST_LINUX=y                 : Linux (Cygwin under Windows okay too).
+       CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y : Buildroot (arm-nuttx-elf-gcc)
+       CONFIG_ARMV7M_OABI_TOOLCHAIN=y      : The older OABI version
+       CONFIG_RAW_BINARY=y                 : Output formats: ELF and raw binary

configs/kwikstik-k40/ostest/appconfig

@@ -1,39 +0,0 @@
-############################################################################
-# configs/kwikstik-k40/ostest/appconfig
-#
-#   Copyright (C) 2011 Gregory Nutt. All rights reserved.
-#   Author: Gregory Nutt <gnutt@nuttx.org>
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# 1. Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in
-#    the documentation and/or other materials provided with the
-#    distribution.
-# 3. Neither the name NuttX nor the names of its contributors may be
-#    used to endorse or promote products derived from this software
-#    without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
-# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
-# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
-# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-# POSSIBILITY OF SUCH DAMAGE.
-#
-############################################################################
-
-# Path to example in apps/examples containing the user_start entry point
-
-CONFIGURED_APPS += examples/ostest
-

configs/kwikstik-k40/ostest/defconfig

@@ -1,256 +1,267 @@
-############################################################################
-# configs/kwikstik-k40/ostest/defconfig
 #
-#   Copyright (C) 2011 Gregory Nutt. All rights reserved.
-#   Author: Gregory Nutt <gnutt@nuttx.org>
+# Automatically generated file; DO NOT EDIT.
+# Nuttx/ Configuration
 #
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# 1. Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in
-#    the documentation and/or other materials provided with the
-#    distribution.
-# 3. Neither the name NuttX nor the names of its contributors may be
-#    used to endorse or promote products derived from this software
-#    without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
-# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
-# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
-# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-# POSSIBILITY OF SUCH DAMAGE.
-#
-############################################################################
-#
-# Architecture Selection
-#
-CONFIG_ARCH="arm"
-CONFIG_ARCH_ARM=y
-CONFIG_ARCH_CORTEXM4=y
-CONFIG_ARCH_CHIP="kinetis"
-CONFIG_ARCH_CHIP_MK40X256VLQ100=y
-CONFIG_ARCH_BOARD="kwikstik-k40"
-CONFIG_ARCH_BOARD_KWIKSTIK_K40=y
-CONFIG_BOARD_LOOPSPERMSEC=9535
-CONFIG_DRAM_START=0x1fff8000
-CONFIG_DRAM_SIZE= 0x00010000
-CONFIG_ARCH_IRQPRIO=y
-CONFIG_ARCH_INTERRUPTSTACK=0
-CONFIG_ARCH_STACKDUMP=y
-CONFIG_ARCH_BOOTLOADER=n
-CONFIG_ARCH_LEDS=y
-CONFIG_ARCH_BUTTONS=n
-CONFIG_ARCH_CALIBRATION=n
-CONFIG_ARCH_DMA=n
+CONFIG_NUTTX_NEWCONFIG=y
 
 #
-# Identify toolchain and linker options
+# Build Setup
 #
-CONFIG_KINETIS_CODESOURCERYW=n
-CONFIG_KINETIS_CODESOURCERYL=n
-CONFIG_KINETIS_DEVKITARM=n
-CONFIG_KINETIS_BUILDROOT=y
-CONFIG_KINETIS_DFU=y
+# CONFIG_EXPERIMENTAL is not set
+CONFIG_HOST_LINUX=y
+# CONFIG_HOST_OSX is not set
+# CONFIG_HOST_WINDOWS is not set
+# CONFIG_HOST_OTHER is not set
 
 #
-# Individual subsystems can be enabled:
+# Build Configuration
 #
-
-CONFIG_KINETIS_TRACE=n
-CONFIG_KINETIS_FLEXBUS=n
-CONFIG_KINETIS_UART0=n
-CONFIG_KINETIS_UART1=n
-CONFIG_KINETIS_UART2=n
-CONFIG_KINETIS_UART3=n
-CONFIG_KINETIS_UART4=n
-CONFIG_KINETIS_UART5=y
-CONFIG_KINETIS_ENET=n
-CONFIG_KINETIS_RNGB=n
-CONFIG_KINETIS_FLEXCAN0=n
-CONFIG_KINETIS_FLEXCAN1=n
-CONFIG_KINETIS_SPI0=n
-CONFIG_KINETIS_SPI1=n
-CONFIG_KINETIS_SPI2=n
-CONFIG_KINETIS_I2C0=n
-CONFIG_KINETIS_I2C1=n
-CONFIG_KINETIS_I2S=n
-CONFIG_KINETIS_DAC0=n
-CONFIG_KINETIS_DAC1=n
-CONFIG_KINETIS_ADC0=n
-CONFIG_KINETIS_ADC1=n
-CONFIG_KINETIS_CMP=n
-CONFIG_KINETIS_VREF=n
-CONFIG_KINETIS_SDHC=n
-CONFIG_KINETIS_FTM0=n
-CONFIG_KINETIS_FTM1=n
-CONFIG_KINETIS_FTM2=n
-CONFIG_KINETIS_LPTIMER=n
-CONFIG_KINETIS_RTC=n
-CONFIG_KINETIS_SLCD=n
-CONFIG_KINETIS_EWM=n
-CONFIG_KINETIS_CMT=n
-CONFIG_KINETIS_USBOTG=n
-CONFIG_KINETIS_USBDCD=n
-CONFIG_KINETIS_LLWU=n
-CONFIG_KINETIS_TSI=n
-CONFIG_KINETIS_FTFL=n
-CONFIG_KINETIS_DMA=n
-CONFIG_KINETIS_CRC=n
-CONFIG_KINETIS_PDB=n
-CONFIG_KINETIS_PIT=n
-CONFIG_ARMV7M_MPU=n
+# CONFIG_APPS_DIR="../apps"
+# CONFIG_BUILD_2PASS is not set
 
 #
-# PIN Interrupt Support
+# Binary Output Formats
 #
-CONFIG_GPIO_IRQ=n
-CONFIG_KINETIS_PORTAINTS=n
-CONFIG_KINETIS_PORTBINTS=n
-CONFIG_KINETIS_PORTCINTS=n
-CONFIG_KINETIS_PORTDINTS=n
-CONFIG_KINETIS_PORTEINTS=n
-
-#
-# K40X256VLQ100 specific serial device driver settings
-#
-CONFIG_UART0_SERIAL_CONSOLE=n
-CONFIG_UART1_SERIAL_CONSOLE=n
-CONFIG_UART2_SERIAL_CONSOLE=n
-CONFIG_UART3_SERIAL_CONSOLE=n
-CONFIG_UART4_SERIAL_CONSOLE=n
-CONFIG_UART5_SERIAL_CONSOLE=y
-
-CONFIG_UART0_TXBUFSIZE=256
-CONFIG_UART1_TXBUFSIZE=256
-CONFIG_UART2_TXBUFSIZE=256
-CONFIG_UART3_TXBUFSIZE=256
-CONFIG_UART4_TXBUFSIZE=256
-CONFIG_UART5_TXBUFSIZE=256
-
-CONFIG_UART0_RXBUFSIZE=256
-CONFIG_UART1_RXBUFSIZE=256
-CONFIG_UART2_RXBUFSIZE=256
-CONFIG_UART3_RXBUFSIZE=256
-CONFIG_UART4_RXBUFSIZE=256
-CONFIG_UART5_RXBUFSIZE=256
-
-CONFIG_UART0_BAUD=115200
-CONFIG_UART1_BAUD=115200
-CONFIG_UART2_BAUD=115200
-CONFIG_UART3_BAUD=115200
-CONFIG_UART4_BAUD=115200
-CONFIG_UART5_BAUD=115200
-
-CONFIG_UART0_BITS=8
-CONFIG_UART1_BITS=8
-CONFIG_UART2_BITS=8
-CONFIG_UART3_BITS=8
-CONFIG_UART4_BITS=8
-CONFIG_UART5_BITS=8
-
-CONFIG_UART0_PARITY=0
-CONFIG_UART2_PARITY=0
-CONFIG_UART3_PARITY=0
-CONFIG_UART4_PARITY=0
-CONFIG_UART5_PARITY=0
-
-#
-# General build options
-#
-CONFIG_RRLOAD_BINARY=n
+# CONFIG_RRLOAD_BINARY is not set
 CONFIG_INTELHEX_BINARY=y
-CONFIG_MOTOROLA_SREC=n
-CONFIG_RAW_BINARY=n
+# CONFIG_MOTOROLA_SREC is not set
+# CONFIG_RAW_BINARY is not set
 
 #
-# General OS setup
+# Customize Header Files
 #
-CONFIG_USER_ENTRYPOINT="ostest_main"
-CONFIG_DEBUG=n
-CONFIG_DEBUG_VERBOSE=n
-CONFIG_DEBUG_SYMBOLS=n
-CONFIG_MM_REGIONS=1
-CONFIG_ARCH_LOWPUTC=y
+# CONFIG_ARCH_STDBOOL_H is not set
+# CONFIG_ARCH_MATH_H is not set
+# CONFIG_ARCH_FLOAT_H is not set
+# CONFIG_ARCH_STDARG_H is not set
+
+#
+# Debug Options
+#
+# CONFIG_DEBUG is not set
+# CONFIG_DEBUG_SYMBOLS is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_8051 is not set
+CONFIG_ARCH_ARM=y
+# CONFIG_ARCH_AVR is not set
+# CONFIG_ARCH_HC is not set
+# CONFIG_ARCH_MIPS is not set
+# CONFIG_ARCH_RGMP is not set
+# CONFIG_ARCH_SH is not set
+# CONFIG_ARCH_SIM is not set
+# CONFIG_ARCH_X86 is not set
+# CONFIG_ARCH_Z16 is not set
+# CONFIG_ARCH_Z80 is not set
+CONFIG_ARCH="arm"
+
+#
+# ARM Options
+#
+# CONFIG_ARCH_CHIP_C5471 is not set
+# CONFIG_ARCH_CHIP_CALYPSO is not set
+# CONFIG_ARCH_CHIP_DM320 is not set
+# CONFIG_ARCH_CHIP_IMX is not set
+CONFIG_ARCH_CHIP_KINETIS=y
+# CONFIG_ARCH_CHIP_LM is not set
+# CONFIG_ARCH_CHIP_LPC17XX is not set
+# CONFIG_ARCH_CHIP_LPC214X is not set
+# CONFIG_ARCH_CHIP_LPC2378 is not set
+# CONFIG_ARCH_CHIP_LPC31XX is not set
+# CONFIG_ARCH_CHIP_LPC43XX is not set
+# CONFIG_ARCH_CHIP_NUC1XX is not set
+# CONFIG_ARCH_CHIP_SAM3U is not set
+# CONFIG_ARCH_CHIP_STM32 is not set
+# CONFIG_ARCH_CHIP_STR71X is not set
+CONFIG_ARCH_CORTEXM4=y
+CONFIG_ARCH_FAMILY="armv7-m"
+CONFIG_ARCH_CHIP="kinetis"
+# CONFIG_ARMV7M_USEBASEPRI is not set
+# CONFIG_ARCH_FPU is not set
+CONFIG_ARCH_HAVE_MPU=y
+# CONFIG_ARMV7M_MPU is not set
+
+#
+# ARMV7M Configuration Options
+#
+CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y
+# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set
+# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set
+# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI is not set
+CONFIG_ARMV7M_OABI_TOOLCHAIN=y
+
+#
+# Kinetis Configuration Options
+#
+# CONFIG_ARCH_CHIP_MK40N512VLQ100 is not set
+# CONFIG_ARCH_CHIP_MK40N512VMD100 is not set
+# CONFIG_ARCH_CHIP_MK40X128VLQ100 is not set
+# CONFIG_ARCH_CHIP_MK40X128VMD100 is not set
+CONFIG_ARCH_CHIP_MK40X256VLQ100=y
+# CONFIG_ARCH_CHIP_MK40X256VMD100 is not set
+# CONFIG_ARCH_CHIP_MK60N256VLQ100 is not set
+# CONFIG_ARCH_CHIP_MK60N256VMD100 is not set
+# CONFIG_ARCH_CHIP_MK60N512VLQ100 is not set
+# CONFIG_ARCH_CHIP_MK60N512VMD100 is not set
+# CONFIG_ARCH_CHIP_MK60X256VLQ100 is not set
+# CONFIG_ARCH_CHIP_MK60X256VMD100 is not set
+CONFIG_ARCH_FAMILY_K40=y
+# CONFIG_ARCH_FAMILY_K60 is not set
+
+#
+# Kinetis Peripheral Support
+#
+# CONFIG_KINETIS_TRACE is not set
+# CONFIG_KINETIS_FLEXBUS is not set
+# CONFIG_KINETIS_UART0 is not set
+# CONFIG_KINETIS_UART1 is not set
+# CONFIG_KINETIS_UART2 is not set
+# CONFIG_KINETIS_UART3 is not set
+# CONFIG_KINETIS_UART4 is not set
+CONFIG_KINETIS_UART5=y
+# CONFIG_KINETIS_FLEXCAN0 is not set
+# CONFIG_KINETIS_FLEXCAN1 is not set
+# CONFIG_KINETIS_SPI0 is not set
+# CONFIG_KINETIS_SPI1 is not set
+# CONFIG_KINETIS_SPI2 is not set
+# CONFIG_KINETIS_I2C0 is not set
+# CONFIG_KINETIS_I2C1 is not set
+# CONFIG_KINETIS_I2S is not set
+# CONFIG_KINETIS_DAC0 is not set
+# CONFIG_KINETIS_DAC1 is not set
+# CONFIG_KINETIS_ADC0 is not set
+# CONFIG_KINETIS_ADC1 is not set
+# CONFIG_KINETIS_CMP is not set
+# CONFIG_KINETIS_VREF is not set
+# CONFIG_KINETIS_SDHC is not set
+# CONFIG_KINETIS_FTM0 is not set
+# CONFIG_KINETIS_FTM1 is not set
+# CONFIG_KINETIS_FTM2 is not set
+# CONFIG_KINETIS_LPTIMER is not set
+# CONFIG_KINETIS_RTC is not set
+# CONFIG_KINETIS_SLCD is not set
+# CONFIG_KINETIS_EWM is not set
+# CONFIG_KINETIS_CMT is not set
+# CONFIG_KINETIS_USBOTG is not set
+# CONFIG_KINETIS_USBDCD is not set
+# CONFIG_KINETIS_LLWU is not set
+# CONFIG_KINETIS_TSI is not set
+# CONFIG_KINETIS_FTFL is not set
+# CONFIG_KINETIS_DMA is not set
+# CONFIG_KINETIS_CRC is not set
+# CONFIG_KINETIS_PDB is not set
+# CONFIG_KINETIS_PIT is not set
+
+#
+# Kinetis GPIO Interrupt Configuration
+#
+# CONFIG_GPIO_IRQ is not set
+
+#
+# Kinetis UART Configuration
+#
+
+#
+# External Memory Configuration
+#
+
+#
+# Architecture Options
+#
+# CONFIG_ARCH_NOINTC is not set
+# CONFIG_ARCH_VECNOTIRQ is not set
+# CONFIG_ARCH_DMA is not set
+CONFIG_ARCH_IRQPRIO=y
+# CONFIG_CUSTOM_STACK is not set
+# CONFIG_ADDRENV is not set
+CONFIG_ARCH_HAVE_VFORK=y
+CONFIG_ARCH_STACKDUMP=y
+# CONFIG_ENDIAN_BIG is not set
+CONFIG_ARCH_HAVE_RAMFUNCS=y
+CONFIG_ARCH_RAMFUNCS=y
+CONFIG_ARCH_HAVE_RAMVECTORS=y
+# CONFIG_ARCH_RAMVECTORS is not set
+
+#
+# Board Settings
+#
+CONFIG_BOARD_LOOPSPERMSEC=9535
+# CONFIG_ARCH_CALIBRATION is not set
+CONFIG_DRAM_START=0x1fff8000
+CONFIG_DRAM_SIZE=65536
+CONFIG_ARCH_HAVE_INTERRUPTSTACK=y
+CONFIG_ARCH_INTERRUPTSTACK=0
+
+#
+# Boot options
+#
+# CONFIG_BOOT_RUNFROMEXTSRAM is not set
+CONFIG_BOOT_RUNFROMFLASH=y
+# CONFIG_BOOT_RUNFROMISRAM is not set
+# CONFIG_BOOT_RUNFROMSDRAM is not set
+# CONFIG_BOOT_COPYTORAM is not set
+
+#
+# Board Selection
+#
+CONFIG_ARCH_BOARD_KWIKSTIK_K40=y
+# CONFIG_ARCH_BOARD_CUSTOM is not set
+CONFIG_ARCH_BOARD="kwikstik-k40"
+
+#
+# Common Board Options
+#
+CONFIG_ARCH_HAVE_LEDS=y
+CONFIG_ARCH_LEDS=y
+CONFIG_ARCH_HAVE_BUTTONS=y
+# CONFIG_ARCH_BUTTONS is not set
+CONFIG_ARCH_HAVE_IRQBUTTONS=y
+
+#
+# Board-Specific Options
+#
+
+#
+# RTOS Features
+#
+# CONFIG_BOARD_INITIALIZE is not set
+CONFIG_MSEC_PER_TICK=10
 CONFIG_RR_INTERVAL=200
-CONFIG_SCHED_INSTRUMENTATION=n
+# CONFIG_SCHED_INSTRUMENTATION is not set
 CONFIG_TASK_NAME_SIZE=0
+# CONFIG_SCHED_HAVE_PARENT is not set
+# CONFIG_JULIAN_TIME is not set
 CONFIG_START_YEAR=2009
 CONFIG_START_MONTH=9
 CONFIG_START_DAY=21
-CONFIG_GREGORIAN_TIME=n
-CONFIG_JULIAN_TIME=n
 CONFIG_DEV_CONSOLE=y
-CONFIG_DEV_LOWCONSOLE=y
-CONFIG_MUTEX_TYPES=n
-CONFIG_PRIORITY_INHERITANCE=n
-CONFIG_SEM_PREALLOCHOLDERS=0
-CONFIG_SEM_NNESTPRIO=0
-CONFIG_FDCLONE_DISABLE=n
-CONFIG_FDCLONE_STDIO=n
+# CONFIG_MUTEX_TYPES is not set
+# CONFIG_PRIORITY_INHERITANCE is not set
+# CONFIG_FDCLONE_DISABLE is not set
+# CONFIG_FDCLONE_STDIO is not set
 CONFIG_SDCLONE_DISABLE=y
-CONFIG_NXFLAT=n
-CONFIG_SCHED_WORKQUEUE=n
-CONFIG_SCHED_WORKPRIORITY=192
-CONFIG_SCHED_WORKPERIOD=50000
-CONFIG_SCHED_WORKSTACKSIZE=1024
-CONFIG_SIG_SIGWORK=17
-
-#
-# The following can be used to disable categories of
-# APIs supported by the OS.  If the compiler supports
-# weak functions, then it should not be necessary to
-# disable functions unless you want to restrict usage
-# of those APIs.
-#
-# There are certain dependency relationships in these
-# features.
-#
-# o mq_notify logic depends on signals to awaken tasks
-#   waiting for queues to become full or empty.
-# o pthread_condtimedwait() depends on signals to wake
-#   up waiting tasks.
-#
-CONFIG_DISABLE_CLOCK=n
-CONFIG_DISABLE_POSIX_TIMERS=n
-CONFIG_DISABLE_PTHREAD=n
-CONFIG_DISABLE_SIGNALS=n
-CONFIG_DISABLE_MQUEUE=n
-CONFIG_DISABLE_MOUNTPOINT=y
+# CONFIG_SCHED_WAITPID is not set
+# CONFIG_SCHED_STARTHOOK is not set
+# CONFIG_SCHED_ATEXIT is not set
+# CONFIG_SCHED_ONEXIT is not set
+CONFIG_USER_ENTRYPOINT="ostest_main"
+CONFIG_DISABLE_OS_API=y
+# CONFIG_DISABLE_CLOCK is not set
+# CONFIG_DISABLE_POSIX_TIMERS is not set
+# CONFIG_DISABLE_PTHREAD is not set
+# CONFIG_DISABLE_SIGNALS is not set
+# CONFIG_DISABLE_MQUEUE is not set
 CONFIG_DISABLE_ENVIRON=y
-CONFIG_DISABLE_POLL=y
 
 #
-# Misc libc settings
+# Signal Numbers
 #
-CONFIG_NOPRINTF_FIELDWIDTH=n
-
-#
-# Allow for architecture optimized implementations
-#
-# The architecture can provide optimized versions of the
-# following to improve system performance
-#
-CONFIG_ARCH_MEMCPY=n
-CONFIG_ARCH_MEMCMP=n
-CONFIG_ARCH_MEMMOVE=n
-CONFIG_ARCH_MEMSET=n
-CONFIG_ARCH_STRCMP=n
-CONFIG_ARCH_STRCPY=n
-CONFIG_ARCH_STRNCPY=n
-CONFIG_ARCH_STRLEN=n
-CONFIG_ARCH_STRNLEN=n
-CONFIG_ARCH_BZERO=n
+CONFIG_SIG_SIGUSR1=1
+CONFIG_SIG_SIGUSR2=2
+CONFIG_SIG_SIGALARM=3
+CONFIG_SIG_SIGCONDTIMEDOUT=16
 
 #
 # Sizes of configurable things (0 disables)
@@ -261,209 +272,312 @@ CONFIG_NPTHREAD_KEYS=4
 CONFIG_NFILE_DESCRIPTORS=8
 CONFIG_NFILE_STREAMS=8
 CONFIG_NAME_MAX=32
-CONFIG_STDIO_BUFFER_SIZE=64
-CONFIG_NUNGET_CHARS=2
 CONFIG_PREALLOC_MQ_MSGS=4
 CONFIG_MQ_MAXMSGSIZE=32
 CONFIG_MAX_WDOGPARMS=2
 CONFIG_PREALLOC_WDOGS=4
 CONFIG_PREALLOC_TIMERS=4
 
-#
-# Filesystem configuration
-#
-CONFIG_FS_FAT=n
-CONFIG_FAT_LCNAMES=n
-CONFIG_FAT_LFN=n
-CONFIG_FAT_MAXFNAME=32
-CONFIG_FS_NXFFS=n
-CONFIG_FS_ROMFS=n
-
-#
-# Maintain legacy build behavior (revisit)
-#
-
-CONFIG_MMCSD=y
-CONFIG_MMCSD_SPI=y
-CONFIG_MMCSD_SDIO=y
-CONFIG_MTD=y
-
-#
-# SPI-based MMC/SD driver
-#
-CONFIG_MMCSD_NSLOTS=1
-CONFIG_MMCSD_READONLY=n
-CONFIG_MMCSD_SPICLOCK=12500000
-
-#
-# Block driver buffering
-#
-CONFIG_FS_READAHEAD=n
-CONFIG_FS_WRITEBUFFER=n
-
-#
-# SDIO-based MMC/SD driver
-#
-CONFIG_SDIO_DMA=n
-CONFIG_MMCSD_MMCSUPPORT=n
-CONFIG_MMCSD_HAVECARDDETECT=n
-
-#
-# TCP/IP and UDP support via uIP
-#
-CONFIG_NET=n
-CONFIG_NET_IPv6=n
-CONFIG_NSOCKET_DESCRIPTORS=0
-CONFIG_NET_SOCKOPTS=y
-CONFIG_NET_BUFSIZE=420
-CONFIG_NET_TCP=n
-CONFIG_NET_TCP_CONNS=40
-CONFIG_NET_MAX_LISTENPORTS=40
-CONFIG_NET_UDP=n
-CONFIG_NET_UDP_CHECKSUMS=y
-#CONFIG_NET_UDP_CONNS=10
-CONFIG_NET_ICMP=n
-CONFIG_NET_ICMP_PING=n
-#CONFIG_NET_PINGADDRCONF=0
-CONFIG_NET_STATISTICS=y
-#CONFIG_NET_RECEIVE_WINDOW=
-#CONFIG_NET_ARPTAB_SIZE=8
-CONFIG_NET_BROADCAST=n
-
-#
-# UIP Network Utilities
-#
-CONFIG_NET_DHCP_LIGHT=n
-CONFIG_NET_RESOLV_ENTRIES=4
-
-#
-# USB Device Configuration
-#
-CONFIG_USBDEV=n
-CONFIG_USBDEV_ISOCHRONOUS=n
-CONFIG_USBDEV_DUALSPEED=n
-CONFIG_USBDEV_SELFPOWERED=y
-CONFIG_USBDEV_REMOTEWAKEUP=n
-CONFIG_USBDEV_MAXPOWER=100
-CONFIG_USBDEV_TRACE=n
-CONFIG_USBDEV_TRACE_NRECORDS=128
-
-#
-# USB Serial Device Configuration
-#
-CONFIG_PL2303=n
-CONFIG_PL2303_EPINTIN=1
-CONFIG_PL2303_EPBULKOUT=2
-CONFIG_PL2303_EPBULKIN=3
-CONFIG_PL2303_NWRREQS=4
-CONFIG_PL2303_NRDREQS=4
-CONFIG_PL2303_VENDORID=0x067b
-CONFIG_PL2303_PRODUCTID=0x2303
-CONFIG_PL2303_VENDORSTR="Nuttx"
-CONFIG_PL2303_PRODUCTSTR="USBdev Serial"
-CONFIG_PL2303_RXBUFSIZE=512
-CONFIG_PL2303_TXBUFSIZE=512
-
-#
-# USB Storage Device Configuration
-#
-CONFIG_USBMSC=n
-CONFIG_USBMSC_EP0MAXPACKET=64
-CONFIG_USBMSC_EPBULKOUT=2
-CONFIG_USBMSC_EPBULKIN=5
-CONFIG_USBMSC_NRDREQS=2
-CONFIG_USBMSC_NWRREQS=2
-CONFIG_USBMSC_BULKINREQLEN=256
-CONFIG_USBMSC_BULKOUTREQLEN=256
-CONFIG_USBMSC_VENDORID=0x584e
-CONFIG_USBMSC_VENDORSTR="NuttX"
-CONFIG_USBMSC_PRODUCTID=0x5342
-CONFIG_USBMSC_PRODUCTSTR="USBdev Storage"
-CONFIG_USBMSC_VERSIONNO=0x0399
-CONFIG_USBMSC_REMOVABLE=y
-
-#
-# Settings for examples/uip
-#
-CONFIG_EXAMPLES_UIP_IPADDR=0x0a000002
-CONFIG_EXAMPLES_UIP_DRIPADDR=0x0a000001
-CONFIG_EXAMPLES_UIP_NETMASK=0xffffff00
-CONFIG_EXAMPLES_UIP_DHCPC=n
-
-#
-# Settings for examples/nettest
-CONFIG_EXAMPLES_NETTEST_SERVER=n
-CONFIG_EXAMPLES_NETTEST_PERFORMANCE=n
-CONFIG_EXAMPLES_NETTEST_NOMAC=n
-CONFIG_EXAMPLES_NETTEST_IPADDR=0x0a000002
-CONFIG_EXAMPLES_NETTEST_DRIPADDR=0x0a000001
-CONFIG_EXAMPLES_NETTEST_NETMASK=0xffffff00
-CONFIG_EXAMPLES_NETTEST_CLIENTIP=0x0a000001
-
-#
-# Settings for examples/ostest
-#
-CONFIG_EXAMPLES_OSTEST_LOOPS=1
-CONFIG_EXAMPLES_OSTEST_STACKSIZE=2048
-CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=3
-
-#
-# Settings for apps/nshlib
-#
-CONFIG_NSH_FILEIOSIZE=512
-CONFIG_NSH_STRERROR=n
-CONFIG_NSH_LINELEN=64
-CONFIG_NSH_NESTDEPTH=3
-CONFIG_NSH_DISABLESCRIPT=n
-CONFIG_NSH_DISABLEBG=n
-CONFIG_NSH_ROMFSETC=n
-CONFIG_NSH_CONSOLE=y
-CONFIG_NSH_TELNET=n
-CONFIG_NSH_ARCHINIT=n
-CONFIG_NSH_IOBUFFER_SIZE=512
-CONFIG_NSH_DHCPC=n
-CONFIG_NSH_NOMAC=n
-CONFIG_NSH_IPADDR=0x0a000002
-CONFIG_NSH_DRIPADDR=0x0a000001
-CONFIG_NSH_NETMASK=0xffffff00
-CONFIG_NSH_ROMFSMOUNTPT="/etc"
-CONFIG_NSH_INITSCRIPT="init.d/rcS"
-CONFIG_NSH_ROMFSDEVNO=0
-CONFIG_NSH_ROMFSSECTSIZE=64
-CONFIG_NSH_FATDEVNO=1
-CONFIG_NSH_FATSECTSIZE=512
-CONFIG_NSH_FATNSECTORS=1024
-CONFIG_NSH_FATMOUNTPT="/tmp"
-
-#
-# Architecture-specific NSH options
-#
-CONFIG_NSH_MMCSDSPIPORTNO=0
-CONFIG_NSH_MMCSDSLOTNO=0
-CONFIG_NSH_MMCSDMINOR=0
-
-#
-# Settings for examples/usbserial
-#
-CONFIG_EXAMPLES_USBSERIAL_INONLY=n
-CONFIG_EXAMPLES_USBSERIAL_OUTONLY=n
-CONFIG_EXAMPLES_USBSERIAL_ONLYSMALL=n
-CONFIG_EXAMPLES_USBSERIAL_ONLYBIG=n
-
-CONFIG_EXAMPLES_USBSERIAL_TRACEINIT=n
-CONFIG_EXAMPLES_USBSERIAL_TRACECLASS=n
-CONFIG_EXAMPLES_USBSERIAL_TRACETRANSFERS=n
-CONFIG_EXAMPLES_USBSERIAL_TRACECONTROLLER=n
-CONFIG_EXAMPLES_USBSERIAL_TRACEINTERRUPTS=n
-
 #
 # Stack and heap information
 #
-CONFIG_BOOT_RUNFROMFLASH=n
-CONFIG_BOOT_COPYTORAM=n
-CONFIG_ARCH_RAMFUNCS=y
-CONFIG_CUSTOM_STACK=n
 CONFIG_IDLETHREAD_STACKSIZE=1024
 CONFIG_USERMAIN_STACKSIZE=2048
 CONFIG_PTHREAD_STACK_MIN=256
 CONFIG_PTHREAD_STACK_DEFAULT=2048
+
+#
+# Device Drivers
+#
+CONFIG_DISABLE_POLL=y
+CONFIG_DEV_NULL=y
+# CONFIG_DEV_ZERO is not set
+# CONFIG_LOOP is not set
+# CONFIG_RAMDISK is not set
+# CONFIG_CAN is not set
+# CONFIG_PWM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_RTC is not set
+# CONFIG_WATCHDOG is not set
+# CONFIG_ANALOG is not set
+# CONFIG_BCH is not set
+# CONFIG_INPUT is not set
+# CONFIG_LCD is not set
+# CONFIG_MMCSD is not set
+# CONFIG_MTD is not set
+# CONFIG_PIPES is not set
+# CONFIG_PM is not set
+# CONFIG_POWER is not set
+# CONFIG_SENSORS is not set
+# CONFIG_SERCOMM_CONSOLE is not set
+CONFIG_SERIAL=y
+CONFIG_DEV_LOWCONSOLE=y
+# CONFIG_16550_UART is not set
+CONFIG_ARCH_HAVE_UART5=y
+CONFIG_MCU_SERIAL=y
+CONFIG_UART5_SERIAL_CONSOLE=y
+# CONFIG_NO_SERIAL_CONSOLE is not set
+
+#
+# UART5 Configuration
+#
+CONFIG_UART5_RXBUFSIZE=256
+CONFIG_UART5_TXBUFSIZE=256
+CONFIG_UART5_BAUD=115200
+CONFIG_UART5_BITS=8
+CONFIG_UART5_PARITY=0
+CONFIG_UART5_2STOP=0
+# CONFIG_USBDEV is not set
+# CONFIG_USBHOST is not set
+# CONFIG_WIRELESS is not set
+
+#
+# System Logging Device Options
+#
+
+#
+# System Logging
+#
+# CONFIG_RAMLOG is not set
+
+#
+# Networking Support
+#
+# CONFIG_NET is not set
+
+#
+# File Systems
+#
+
+#
+# File system configuration
+#
+CONFIG_DISABLE_MOUNTPOINT=y
+# CONFIG_FS_RAMMAP is not set
+
+#
+# System Logging
+#
+# CONFIG_SYSLOG_ENABLE is not set
+# CONFIG_SYSLOG is not set
+
+#
+# Graphics Support
+#
+# CONFIG_NX is not set
+
+#
+# Memory Management
+#
+# CONFIG_MM_MULTIHEAP is not set
+# CONFIG_MM_SMALL is not set
+CONFIG_MM_REGIONS=1
+# CONFIG_GRAN is not set
+
+#
+# Binary Formats
+#
+# CONFIG_BINFMT_DISABLE is not set
+# CONFIG_NXFLAT is not set
+# CONFIG_ELF is not set
+# CONFIG_BUILTIN is not set
+# CONFIG_PIC is not set
+# CONFIG_SYMTAB_ORDEREDBYNAME is not set
+
+#
+# Library Routines
+#
+
+#
+# Standard C Library Options
+#
+CONFIG_STDIO_BUFFER_SIZE=64
+CONFIG_STDIO_LINEBUFFER=y
+CONFIG_NUNGET_CHARS=2
+# CONFIG_LIBM is not set
+# CONFIG_NOPRINTF_FIELDWIDTH is not set
+# CONFIG_LIBC_FLOATINGPOINT is not set
+# CONFIG_EOL_IS_CR is not set
+# CONFIG_EOL_IS_LF is not set
+# CONFIG_EOL_IS_BOTH_CRLF is not set
+CONFIG_EOL_IS_EITHER_CRLF=y
+# CONFIG_LIBC_EXECFUNCS is not set
+CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024
+CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048
+# CONFIG_LIBC_STRERROR is not set
+# CONFIG_LIBC_PERROR_STDOUT is not set
+CONFIG_ARCH_LOWPUTC=y
+CONFIG_LIB_SENDFILE_BUFSIZE=512
+# CONFIG_ARCH_ROMGETC is not set
+# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set
+
+#
+# Non-standard Library Support
+#
+# CONFIG_SCHED_WORKQUEUE is not set
+# CONFIG_LIB_KBDCODEC is not set
+
+#
+# Basic CXX Support
+#
+# CONFIG_C99_BOOL8 is not set
+# CONFIG_HAVE_CXX is not set
+
+#
+# Application Configuration
+#
+
+#
+# Built-In Applications
+#
+
+#
+# Examples
+#
+# CONFIG_EXAMPLES_BUTTONS is not set
+# CONFIG_EXAMPLES_CAN is not set
+# CONFIG_EXAMPLES_COMPOSITE is not set
+# CONFIG_EXAMPLES_DHCPD is not set
+# CONFIG_EXAMPLES_ELF is not set
+# CONFIG_EXAMPLES_FTPC is not set
+# CONFIG_EXAMPLES_FTPD is not set
+# CONFIG_EXAMPLES_HELLO is not set
+# CONFIG_EXAMPLES_HELLOXX is not set
+# CONFIG_EXAMPLES_JSON is not set
+# CONFIG_EXAMPLES_HIDKBD is not set
+# CONFIG_EXAMPLES_KEYPADTEST is not set
+# CONFIG_EXAMPLES_IGMP is not set
+# CONFIG_EXAMPLES_LCDRW is not set
+# CONFIG_EXAMPLES_MM is not set
+# CONFIG_EXAMPLES_MOUNT is not set
+# CONFIG_EXAMPLES_MODBUS is not set
+# CONFIG_EXAMPLES_NSH is not set
+# CONFIG_EXAMPLES_NULL is not set
+# CONFIG_EXAMPLES_NX is not set
+# CONFIG_EXAMPLES_NXCONSOLE is not set
+# CONFIG_EXAMPLES_NXFFS is not set
+# CONFIG_EXAMPLES_NXFLAT is not set
+# CONFIG_EXAMPLES_NXHELLO is not set
+# CONFIG_EXAMPLES_NXIMAGE is not set
+# CONFIG_EXAMPLES_NXLINES is not set
+# CONFIG_EXAMPLES_NXTEXT is not set
+CONFIG_EXAMPLES_OSTEST=y
+# CONFIG_EXAMPLES_OSTEST_BUILTIN is not set
+CONFIG_EXAMPLES_OSTEST_LOOPS=1
+CONFIG_EXAMPLES_OSTEST_STACKSIZE=2048
+CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=3
+CONFIG_EXAMPLES_OSTEST_RR_RANGE=10000
+CONFIG_EXAMPLES_OSTEST_RR_RUNS=10
+# CONFIG_EXAMPLES_PASHELLO is not set
+# CONFIG_EXAMPLES_PIPE is not set
+# CONFIG_EXAMPLES_POLL is not set
+# CONFIG_EXAMPLES_POSIXSPAWN is not set
+# CONFIG_EXAMPLES_QENCODER is not set
+# CONFIG_EXAMPLES_RGMP is not set
+# CONFIG_EXAMPLES_ROMFS is not set
+# CONFIG_EXAMPLES_SENDMAIL is not set
+# CONFIG_EXAMPLES_SERLOOP is not set
+# CONFIG_EXAMPLES_TELNETD is not set
+# CONFIG_EXAMPLES_THTTPD is not set
+# CONFIG_EXAMPLES_TIFF is not set
+# CONFIG_EXAMPLES_TOUCHSCREEN is not set
+# CONFIG_EXAMPLES_UDP is not set
+# CONFIG_EXAMPLES_UIP is not set
+# CONFIG_EXAMPLES_USBSERIAL is not set
+# CONFIG_EXAMPLES_USBMSC is not set
+# CONFIG_EXAMPLES_USBTERM is not set
+# CONFIG_EXAMPLES_WATCHDOG is not set
+
+#
+# Graphics Support
+#
+# CONFIG_TIFF is not set
+
+#
+# Interpreters
+#
+# CONFIG_INTERPRETERS_FICL is not set
+# CONFIG_INTERPRETERS_PCODE is not set
+
+#
+# Network Utilities
+#
+
+#
+# Networking Utilities
+#
+# CONFIG_NETUTILS_CODECS is not set
+# CONFIG_NETUTILS_DHCPC is not set
+# CONFIG_NETUTILS_DHCPD is not set
+# CONFIG_NETUTILS_FTPC is not set
+# CONFIG_NETUTILS_FTPD is not set
+# CONFIG_NETUTILS_JSON is not set
+# CONFIG_NETUTILS_RESOLV is not set
+# CONFIG_NETUTILS_SMTP is not set
+# CONFIG_NETUTILS_TELNETD is not set
+# CONFIG_NETUTILS_TFTPC is not set
+# CONFIG_NETUTILS_THTTPD is not set
+# CONFIG_NETUTILS_UIPLIB is not set
+# CONFIG_NETUTILS_WEBCLIENT is not set
+
+#
+# FreeModBus
+#
+# CONFIG_MODBUS is not set
+
+#
+# NSH Library
+#
+# CONFIG_NSH_LIBRARY is not set
+
+#
+# NxWidgets/NxWM
+#
+
+#
+# System NSH Add-Ons
+#
+
+#
+# Custom Free Memory Command
+#
+# CONFIG_SYSTEM_FREE is not set
+
+#
+# I2C tool
+#
+
+#
+# FLASH Program Installation
+#
+# CONFIG_SYSTEM_INSTALL is not set
+
+#
+# readline()
+#
+# CONFIG_SYSTEM_READLINE is not set
+
+#
+# Power Off
+#
+# CONFIG_SYSTEM_POWEROFF is not set
+
+#
+# RAMTRON
+#
+# CONFIG_SYSTEM_RAMTRON is not set
+
+#
+# SD Card
+#
+# CONFIG_SYSTEM_SDCARD is not set
+
+#
+# Sysinfo
+#
+# CONFIG_SYSTEM_SYSINFO is not set
+
+#
+# USB Monitor
+#

configs/kwikstik-k40/ostest/setenv.sh

@@ -57,5 +57,5 @@ fi
 export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
 
 # Add the path to the toolchain to the PATH varialble
-export PATH="${BUILDROOT_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
+export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
 echo "PATH : ${PATH}"

configs/lm3s6965-ek/README.txt

@@ -572,6 +572,7 @@ Where <subdir> is one of the following:
 
        CONFIG_HOST_LINUX=y                 : Linux (Cygwin under Windows okay too).
        CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y : Buildroot (arm-nuttx-elf-gcc)
+       CONFIG_ARMV7M_OABI_TOOLCHAIN=y      : The older OABI version
        CONFIG_RAW_BINARY=y                 : Output formats: ELF and raw binary
 
     3. As it is configured now, you MUST have a network connected.

configs/twr-k60n512/README.txt

@@ -658,8 +658,7 @@ Where <subdir> is one of the following:
   ostest:
   ------
     This configuration directory, performs a simple OS test using
-    examples/ostest.  By default, this project assumes that you are
-    using the DFU bootloader.
+    examples/ostest.
 
     CONFIG_KINETIS_BUILDROOT=y      : NuttX buildroot under Linux or Cygwin
 

configs/twr-k60n512/nsh/defconfig

@@ -53,6 +53,7 @@ CONFIG_ARCH_LEDS=y
 CONFIG_ARCH_BUTTONS=n
 CONFIG_ARCH_CALIBRATION=n
 CONFIG_ARCH_DMA=n
+CONFIG_ARCH_FPU=n
 
 #
 # Identify toolchain and linker options
@@ -61,7 +62,6 @@ CONFIG_KINETIS_CODESOURCERYW=n
 CONFIG_KINETIS_CODESOURCERYL=n
 CONFIG_KINETIS_DEVKITARM=n
 CONFIG_KINETIS_BUILDROOT=y
-CONFIG_KINETIS_DFU=y
 
 #
 # Individual subsystems can be enabled:
@@ -205,6 +205,7 @@ CONFIG_SCHED_WORKPRIORITY=192
 CONFIG_SCHED_WORKPERIOD=50000
 CONFIG_SCHED_WORKSTACKSIZE=1024
 CONFIG_SIG_SIGWORK=17
+CONFIG_SCHED_WAITPID=y
 
 #
 # The following can be used to disable categories of

configs/twr-k60n512/nsh/setenv.sh

@@ -57,5 +57,5 @@ fi
 export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
 
 # Add the path to the toolchain to the PATH varialble
-export PATH="${BUILDROOT_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
+export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
 echo "PATH : ${PATH}"

configs/twr-k60n512/ostest/defconfig

@@ -53,6 +53,7 @@ CONFIG_ARCH_LEDS=y
 CONFIG_ARCH_BUTTONS=n
 CONFIG_ARCH_CALIBRATION=n
 CONFIG_ARCH_DMA=n
+CONFIG_ARCH_FPU=n
 
 #
 # Identify toolchain and linker options
@@ -61,7 +62,6 @@ CONFIG_KINETIS_CODESOURCERYW=n
 CONFIG_KINETIS_CODESOURCERYL=n
 CONFIG_KINETIS_DEVKITARM=n
 CONFIG_KINETIS_BUILDROOT=y
-CONFIG_KINETIS_DFU=y
 
 #
 # Individual subsystems can be enabled:

configs/twr-k60n512/ostest/setenv.sh

@@ -57,5 +57,5 @@ fi
 export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
 
 # Add the path to the toolchain to the PATH varialble
-export PATH="${BUILDROOT_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
+export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
 echo "PATH : ${PATH}"