Add an NSH configuration for the Mikroelektronika PIC32MX7 MMB board

git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4795 42af7a65-404d-4744-a932-0658087f49c3
This commit is contained in:
patacongo 2012-06-01 20:20:08 +00:00
parent ebb07b88c1
commit c222a4468d
9 changed files with 2212 additions and 4 deletions

View File

@ -622,6 +622,12 @@ Where <subdir> is one of the following:
CONFIG_PIC32MX_ETHERNET=y : Enable the PIC32 Ethernet driver CONFIG_PIC32MX_ETHERNET=y : Enable the PIC32 Ethernet driver
CONFIG_NSH_TELNET=y : Enable the Telnet NSH console (optional) CONFIG_NSH_TELNET=y : Enable the Telnet NSH console (optional)
The default configuration has:
CONFIG_NSH_DHCPC=n : DHCP is disabled
CONFIG_NSH_IPADDR=(10<<24|0<<16|0<<8|2) : Target IP address 10.0.0.2
CONFIG_NSH_DRIPADDR=(10<<24|0<<16|0<<8|1) : Host IP address 10.0.0.1
NOTES: NOTES:
1. This logic will assume that a network is connected. During its 1. This logic will assume that a network is connected. During its
initialization, it will try to negotiate the link speed. If you have initialization, it will try to negotiate the link speed. If you have
@ -730,3 +736,18 @@ Where <subdir> is one of the following:
So far, I have no clue why this is failing. So far, I have no clue why this is failing.
Status: Open Status: Open
Priority: High Priority: High
Adding LCD and graphics support:
-------------------------------
appconfig (apps/.config): Enable the application configurations that you
want to use. Asexamples:
CONFIGURED_APPS += examples/nx : Pick one or more
CONFIGURED_APPS += examples/nxhello :
CONFIGURED_APPS += examples/nximage :
CONFIGURED_APPS += examples/nxlines :
defconfig (nuttx/.config):
CONFIG_NX=y : Enable graphics suppport

View File

@ -0,0 +1,160 @@
############################################################################
# configs/pic32mx7mmb/nsh/Make.defs
#
# Copyright (C) 2012 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
############################################################################
include ${TOPDIR}/.config
# Setup for the selected toolchain
ifeq ($(CONFIG_PIC32MX_MICROCHIPW),y)
# Microchip toolchain under Windows
CROSSDEV = pic32-
WINTOOL = y
MAXOPTIMIZATION = -O2
ARCHCPUFLAGS = -mprocessor=elf32pic32mx -mno-float -mlong32 -membedded-data
ARCHPICFLAGS = -fpic -membedded-pic
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_PIC32MX_MICROCHIPW_LITE),y)
# Microchip toolchain under Windows
CROSSDEV = pic32-
WINTOOL = y
# MAXOPTIMIZATION = -O2
ARCHCPUFLAGS = -mprocessor=elf32pic32mx -mno-float -mlong32 -membedded-data
ARCHPICFLAGS = -fpic -membedded-pic
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_PIC32MX_MICROCHIPL),y)
# Microchip toolchain under Linux
CROSSDEV = pic32-
MAXOPTIMIZATION = -O2
ARCHCPUFLAGS = -mprocessor=elf32pic32mx -mno-float -mlong32 -membedded-data
ARCHPICFLAGS = -fpic -membedded-pic
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_PIC32MX_MICROCHIPL_LITE),y)
# Microchip toolchain under Linux
CROSSDEV = pic32-
# MAXOPTIMIZATION = -O2
ARCHCPUFLAGS = -mprocessor=elf32pic32mx -mno-float -mlong32 -membedded-data
ARCHPICFLAGS = -fpic -membedded-pic
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(WINTOOL),y)
# Windows-native toolchains
DIRLINK = $(TOPDIR)/tools/winlink.sh
DIRUNLINK = $(TOPDIR)/tools/unlink.sh
MKDEP = $(TOPDIR)/tools/mknulldeps.sh
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/nsh/ld.script}"
else
# Linux/Cygwin-native toolchain
MKDEP = $(TOPDIR)/tools/mkdeps.sh
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/nsh/ld.script
endif
CC = $(CROSSDEV)gcc
CXX = $(CROSSDEV)g++
CPP = $(CROSSDEV)gcc -E
LD = $(CROSSDEV)ld
AR = $(CROSSDEV)ar rcs
NM = $(CROSSDEV)nm
OBJCOPY = $(CROSSDEV)objcopy
OBJDUMP = $(CROSSDEV)objdump
ifeq ("${CONFIG_DEBUG_SYMBOLS}","y")
ARCHOPTIMIZATION = -g
else
ARCHOPTIMIZATION = $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
endif
ARCHCFLAGS = -fno-builtin
ARCHCXXFLAGS = -fno-builtin -fno-exceptions
ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
ARCHWARNINGSXX = -Wall -Wshadow
ARCHDEFINES =
CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
AFLAGS = $(CFLAGS) -D__ASSEMBLY__
NXFLATLDFLAGS1 = -r -d -warn-common
NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat.ld -no-check-sections
LDNXFLATFLAGS = -e main -s 2048
OBJEXT = .o
LIBEXT = .a
EXEEXT =
define PREPROCESS
@echo "CPP: $1->$2"
@$(CPP) $(CPPFLAGS) $1 -o $2
endef
define COMPILE
@echo "CC: $1"
@$(CC) -c $(CFLAGS) $1 -o $2
endef
define COMPILEXX
@echo "CXX: $1"
@$(CXX) -c $(CXXFLAGS) $1 -o $2
endef
define ASSEMBLE
@echo "AS: $1"
@$(CC) -c $(AFLAGS) $1 -o $2
endef
define ARCHIVE
echo "AR: $2"; \
$(AR) $1 $2 || { echo "$(AR) $1 $2 FAILED!" ; exit 1 ; }
endef
define CLEAN
@rm -f *.o *.a
endef
HOSTCC = gcc
HOSTINCLUDES = -I.
HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
HOSTLDFLAGS =

View File

@ -0,0 +1,78 @@
############################################################################
# configs/pic32mx7mmb/nsh/appconfig
#
# Copyright (C) 2012 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
############################################################################
# Path to example in apps/examples containing the user_start entry point
CONFIGURED_APPS += examples/nsh
# The NSH application library
CONFIGURED_APPS += system/readline
CONFIGURED_APPS += nshlib
# Networking libraries.
# Uncomment netutils/ftpc to include an FTP client library
# Uncomment netutils/ftpd to include an FTP server library
ifeq ($(CONFIG_NET),y)
CONFIGURED_APPS += netutils/uiplib
CONFIGURED_APPS += netutils/resolv
CONFIGURED_APPS += netutils/webclient
CONFIGURED_APPS += netutils/tftpc
#CONFIGURED_APPS += netutils/ftpc
#CONFIGURED_APPS += netutils/ftpd
ifeq ($(CONFIG_NSH_TELNET),y)
CONFIGURED_APPS += netutils/telnetd
endif
endif
# Applications configured as an NX built-in commands
# Uncomment examples/ftpc to include the FTP client example
# Uncomment examples/ftpd to include the FTP daemon example
ifeq ($(CONFIG_NET),y)
#CONFIGURED_APPS += examples/ftpc
#CONFIGURED_APPS += examples/ftpd
endif
# Uncomment to select a graphics example
ifeq ($(CONFIG_NX),y)
#CONFIGURED_APPS += examples/nx
#CONFIGURED_APPS += examples/nxhello
#CONFIGURED_APPS += examples/nximage
#CONFIGURED_APPS += examples/nxlines
endif

File diff suppressed because it is too large Load Diff

View File

@ -0,0 +1,317 @@
/****************************************************************************
* configs/pic32mx7mmb/nsh/ld.script
*
* Copyright (C) 2012 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/* Memory Regions ***********************************************************/
MEMORY
{
/* The PIC32MX795F512L has 512Kb of program FLASH at physical address
* 0x1d000000 but is always accessed at KSEG0 address 0x9d00:0000
*/
kseg0_progmem (rx) : ORIGIN = 0x9d000000, LENGTH = 512K
/* The PIC32MX795F512L has 12Kb of boot FLASH at physical address
* 0x1fc00000. The initial reset vector is in KSEG1, but all other
* accesses are in KSEG0.
*
* REGION PHYSICAL KSEG SIZE
* DESCRIPTION START ADDR (BYTES)
* ------------- ---------- ------ ----------------------
* Exceptions:*
* Reset 0x1fc00000 KSEG1 512 512
* TLB Refill 0x1fc00200 KSEG1 256 768
* Cache Error 0x1fc00300 KSEG1 128 896
* Others 0x1fc00380 KSEG1 128 1024 (1Kb)
* Interrupt 0x1fc00400 KSEG1 128 1152
* JTAG 0x1fc00480 KSEG1 16 1168
* Exceptions 0x1fc00490 KSEG0 8192-1168 8192 (4Kb)
* Debug code 0x1fc02000 KSEG1 4096-16 12272
* DEVCFG3-0 0x1fc02ff0 KSEG1 16 12288 (12Kb)
*
* Exceptions assume:
*
* STATUS: BEV=0/1 and EXL=0
* CAUSE: IV=1
* JTAG: ProbEn=0
* And multi-vector support disabled
*/
kseg1_reset (rx) : ORIGIN = 0xbfc00000, LENGTH = 384
kseg1_genexcpt (rx) : ORIGIN = 0xbfc00180, LENGTH = 128
kseg1_ebexcpt (rx) : ORIGIN = 0xbfc00200, LENGTH = 128
kseg1_bevexcpt (rx) : ORIGIN = 0xbfc00380, LENGTH = 128
kseg1_intexcpt (rx) : ORIGIN = 0xbfc00400, LENGTH = 128
kseg1_dbgexcpt (rx) : ORIGIN = 0xbfc00480, LENGTH = 16
kseg0_bootmem (rx) : ORIGIN = 0x9fc00490, LENGTH = 8192-1168
kseg1_dbgcode (rx) : ORIGIN = 0xbfc02000, LENGTH = 4096-16
kseg1_devcfg (r) : ORIGIN = 0xbfc02ff0, LENGTH = 16
/* The PIC32MX795F512L has 128Kb of data memory at physical address
* 0x00000000. Since the PIC32MX has no data cache, this memory is
* always accessed through KSEG1.
*
* When used with MPLAB, we need to set aside 512 bytes of memory
* for use by MPLAB.
*/
kseg1_datamem (w!x) : ORIGIN = 0xa0000200, LENGTH = 128K - 512
}
OUTPUT_FORMAT("elf32-tradlittlemips")
OUTPUT_ARCH(pic32mx)
ENTRY(__start)
SECTIONS
{
/* Boot FLASH sections */
.reset :
{
KEEP (*(.reset))
} > kseg1_reset
/* Exception handlers. The following is assumed:
*
* STATUS: BEV=1 and EXL=0
* CAUSE: IV=1
* JTAG: ProbEn=0
* And multi-vector support disabled
*
* In that configuration, the vector locations become:
*
* Reset, Soft Reset bfc0:0000
* TLB Refill bfc0:0200
* Cache Error bfc0:0300
* All others bfc0:0380
* Interrupt bfc0:0400
* EJTAG Debug bfc0:0480
*/
/* KSEG1 exception handler "trampolines" */
.gen_excpt :
{
KEEP (*(.gen_excpt))
} > kseg1_genexcpt
.ebase_excpt :
{
KEEP (*(.ebase_excpt))
} > kseg1_ebexcpt
.bev_excpt :
{
KEEP (*(.bev_excpt))
} > kseg1_bevexcpt
.int_excpt :
{
KEEP (*(.int_excpt))
} > kseg1_intexcpt
.dbg_excpt = ORIGIN(kseg1_dbgexcpt);
.start :
{
/* KSEG0 Reset startup logic */
*(.start)
/* KSEG0 exception handlers */
*(.nmi_handler)
*(.bev_handler)
*(.int_handler)
} > kseg0_bootmem
.dbg_code = ORIGIN(kseg1_dbgcode);
.devcfg :
{
KEEP (*(.devcfg))
} > kseg1_devcfg
/* Program FLASH sections */
.text :
{
_stext = ABSOLUTE(.);
*(.text .text.*)
*(.stub)
KEEP (*(.text.*personality*))
*(.gnu.linkonce.t.*)
*(.gnu.warning)
*(.mips16.fn.*)
*(.mips16.call.*)
/* Read-only data is included in the text section */
*(.rodata .rodata.*)
*(.rodata1)
*(.gnu.linkonce.r.*)
/* Small initialized constant global and static data */
*(.sdata2 .sdata2.*)
*(.gnu.linkonce.s2.*)
/* Uninitialized constant global and static data */
*(.sbss2 .sbss2.*)
*(.gnu.linkonce.sb2.*)
_etext = ABSOLUTE(.);
} > kseg0_progmem
/* Initialization data begins here in progmem */
_data_loaddr = LOADADDR(.data);
.eh_frame_hdr : { *(.eh_frame_hdr) }
.eh_frame : ONLY_IF_RO { KEEP (*(.eh_frame)) }
/* RAM functions are positioned at the beginning of RAM so that
* they can be guaranteed to satisfy the 2Kb alignment requirement.
*/
/* This causes failures if there are no RAM functions
.ramfunc ALIGN(2K) :
{
_sramfunc = ABSOLUTE(.);
*(.ramfunc .ramfunc.*)
_eramfunc = ABSOLUTE(.);
} > kseg1_datamem AT > kseg0_progmem
_ramfunc_loadaddr = LOADADDR(.ramfunc);
_ramfunc_sizeof = SIZEOF(.ramfunc);
_bmxdkpba_address = _sramfunc - ORIGIN(kseg1_datamem) ;
_bmxdudba_address = LENGTH(kseg1_datamem) ;
_bmxdupba_address = LENGTH(kseg1_datamem) ;
*/
.data :
{
_sdata = ABSOLUTE(.);
*(.data .data.*)
*(.gnu.linkonce.d.*)
KEEP (*(.gnu.linkonce.d.*personality*))
*(.data1)
} > kseg1_datamem AT > kseg0_progmem
.eh_frame : ONLY_IF_RW { KEEP (*(.eh_frame)) }
_gp = ALIGN(16) + 0x7FF0 ;
.got :
{
*(.got.plt) *(.got)
} > kseg1_datamem AT > kseg0_progmem
.sdata :
{
*(.sdata .sdata.* .gnu.linkonce.s.*)
} > kseg1_datamem AT > kseg0_progmem
.lit8 :
{
*(.lit8)
} > kseg1_datamem AT > kseg0_progmem
.lit4 :
{
*(.lit4)
_edata = ABSOLUTE(.);
} >kseg1_datamem AT>kseg0_progmem
.sbss :
{
_sbss = ABSOLUTE(.);
*(.dynsbss)
*(.sbss .sbss.* .gnu.linkonce.sb.*)
*(.scommon)
} >kseg1_datamem
.bss :
{
*(.dynbss)
*(.bss .bss.*)
*(.gnu.linkonce.b.*)
*(COMMON)
_ebss = ABSOLUTE(.);
} > kseg1_datamem
/* Stabs debugging sections */
.stab 0 : { *(.stab) }
.stabstr 0 : { *(.stabstr) }
.stab.excl 0 : { *(.stab.excl) }
.stab.exclstr 0 : { *(.stab.exclstr) }
.stab.index 0 : { *(.stab.index) }
.stab.indexstr 0 : { *(.stab.indexstr) }
.comment 0 : { *(.comment) }
/* DWARF debug sections */
/* DWARF 1 */
.debug 0 : { *(.debug) }
.line 0 : { *(.line) }
/* GNU DWARF 1 extensions */
.debug_srcinfo 0 : { *(.debug_srcinfo) }
.debug_sfnames 0 : { *(.debug_sfnames) }
/* DWARF 1.1 and DWARF 2 */
.debug_aranges 0 : { *(.debug_aranges) }
.debug_pubnames 0 : { *(.debug_pubnames) }
/* DWARF 2 */
.debug_info 0 : { *(.debug_info .gnu.linkonce.wi.*) }
.debug_abbrev 0 : { *(.debug_abbrev) }
.debug_line 0 : { *(.debug_line) }
.debug_frame 0 : { *(.debug_frame) }
.debug_str 0 : { *(.debug_str) }
.debug_loc 0 : { *(.debug_loc) }
.debug_macinfo 0 : { *(.debug_macinfo) }
/* SGI/MIPS DWARF 2 extensions */
.debug_weaknames 0 : { *(.debug_weaknames) }
.debug_funcnames 0 : { *(.debug_funcnames) }
.debug_typenames 0 : { *(.debug_typenames) }
.debug_varnames 0 : { *(.debug_varnames) }
/DISCARD/ : { *(.note.GNU-stack) }
}

View File

@ -0,0 +1,61 @@
#!/bin/bash
# configs/pic32mx7mmb/nsh/setenv.sh
#
# Copyright (C) 2012 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
if [ "$_" = "$0" ] ; then
echo "You must source this script, not run it!" 1>&2
exit 1
fi
if [ -z "${PATH_ORIG}" ]; then export PATH_ORIG="${PATH}"; fi
WD=`pwd`
if [ ! -x "setenv.sh" ]; then
echo "This script must be executed from the top-level NuttX build directory"
exit 1
fi
# This the Cygwin path to the location where I installed the MicroChip
# PIC32MX toolchain under windows. This is *not* the default install
# location so you will probably have to edit this. You will also have
# to edit this if you install a different version of if you install
# the Linux PIC32MX toolchain as well
export TOOLCHAIN_BIN="/cygdrive/c/MicroChip/mplabc32/v1.12/bin"
# This is the path to the tools subdirectory
export PIC32TOOL_DIR="${WD}/configs/pic32mx7mmb/tools"
# Add the path to the toolchain to the PATH variable
export PATH="${TOOLCHAIN_BIN}:${PIC32TOOL_DIR}:/sbin:/usr/sbin:${PATH_ORIG}"
echo "PATH : ${PATH}"

View File

@ -450,7 +450,7 @@ CONFIG_SCHED_INSTRUMENTATION=n
CONFIG_TASK_NAME_SIZE=0 CONFIG_TASK_NAME_SIZE=0
CONFIG_START_YEAR=2012 CONFIG_START_YEAR=2012
CONFIG_START_MONTH=4 CONFIG_START_MONTH=4
CONFIG_START_DAY=222 CONFIG_START_DAY=22
CONFIG_GREGORIAN_TIME=n CONFIG_GREGORIAN_TIME=n
CONFIG_JULIAN_TIME=n CONFIG_JULIAN_TIME=n
CONFIG_DEV_CONSOLE=y CONFIG_DEV_CONSOLE=y

View File

@ -52,10 +52,10 @@ fi
# the Linux PIC32MX toolchain as well # the Linux PIC32MX toolchain as well
export TOOLCHAIN_BIN="/cygdrive/c/MicroChip/mplabc32/v1.12/bin" export TOOLCHAIN_BIN="/cygdrive/c/MicroChip/mplabc32/v1.12/bin"
# This is the path to the toosl subdirectory # This is the path to the tools subdirectory
export PIC32TOOL_DIR="${WD}/configs/pic32mx7mmb/tools" export PIC32TOOL_DIR="${WD}/configs/pic32mx7mmb/tools"
# Add the path to the toolchain to the PATH varialble # Add the path to the toolchain to the PATH variable
export PATH="${TOOLCHAIN_BIN}:${PIC32TOOL_DIR}:/sbin:/usr/sbin:${PATH_ORIG}" export PATH="${TOOLCHAIN_BIN}:${PIC32TOOL_DIR}:/sbin:/usr/sbin:${PATH_ORIG}"
echo "PATH : ${PATH}" echo "PATH : ${PATH}"

View File

@ -1249,7 +1249,6 @@ CONFIG_NXTK_BORDERCOLOR1=0x5cb7
CONFIG_NXTK_BORDERCOLOR2=0x21c9 CONFIG_NXTK_BORDERCOLOR2=0x21c9
CONFIG_NXTK_BORDERCOLOR3=0xffdf CONFIG_NXTK_BORDERCOLOR3=0xffdf
CONFIG_NXTK_AUTORAISE=n CONFIG_NXTK_AUTORAISE=n
CONFIG_NXTK_AUTORAISE=n
CONFIG_NXFONT_SANS17X22=n CONFIG_NXFONT_SANS17X22=n
CONFIG_NXFONT_SANS20X26=n CONFIG_NXFONT_SANS20X26=n
CONFIG_NXFONT_SANS22X29=n CONFIG_NXFONT_SANS22X29=n