reason:
In the kernel, we are planning to remove all occurrences of up_cpu_pause as one of the steps to
simplify the implementation of critical sections. The goal is to enable spin_lock_irqsave to encapsulate critical sections,
thereby facilitating the replacement of critical sections(big lock) with smaller spin_lock_irqsave(small lock)
Signed-off-by: hujun5 <hujun5@xiaomi.com>
Revert "Parallelize depend file generation"
This reverts commit d5b6ec450f.
parallel depend ddc does not significantly speed up compilation,
intermediately generated .ddc files can cause problems if compilation is interrupted unexpectedly
Signed-off-by: xuxin19 <xuxin19@xiaomi.com>
reason:
1 On different architectures, we can utilize more optimized strategies
to implement up_current_regs/up_set_current_regs.
eg. use interrupt registersor percpu registers.
code size
before
text data bss dec hex filename
262848 49985 63893 376726 5bf96 nuttx
after
text data bss dec hex filename
262844 49985 63893 376722 5bf92 nuttx
size change -4
Configuring NuttX and compile:
$ ./tools/configure.sh -l qemu-armv8a:nsh_smp
$ make
Running with qemu
$ qemu-system-aarch64 -cpu cortex-a53 -smp 4 -nographic \
-machine virt,virtualization=on,gic-version=3 \
-net none -chardev stdio,id=con,mux=on -serial chardev:con \
-mon chardev=con,mode=readline -kernel ./nuttx
Signed-off-by: hujun5 <hujun5@xiaomi.com>
We can see them in ifconfig:
ap> ifconfig
wlan0 Link encap:Ethernet HWaddr 42:64:7f:b3:12:03 at UP mtu 1500
inet addr:10.0.1.2 DRaddr:10.0.1.1 Mask:255.255.255.0
inet6 DRaddr: ::
RX: Received Fragment Errors Bytes
00000b9b 00000000 00000000 21daf5
IPv4 IPv6 ARP Dropped
00000a33 00000137 00000031 00000000
TX: Queued Sent Errors Timeouts Bytes
00000ac4 00000ac4 00000000 00000000 1a2103
Total Errors: 00000000
Signed-off-by: meijian <meijian@xiaomi.com>
Some USB controllers can receive or send multiple data packets then
generate one interrupt. This mechanism can reduce the number of data
copies. Extend req buf to accommodate this.
Signed-off-by: yangsong8 <yangsong8@xiaomi.com>
Newly added logging in `sched/task_exit.c` obsoletes the existing
ones in `arch/up_exit()`, thus remove the latter to reduce duplications.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
When supporting high-priority interrupts, updating the
g_running_tasks within a high-priority interrupt may be
cause problems. The g_running_tasks should only be updated
when it is determined that a task context switch has occurred.
Signed-off-by: zhangyuan21 <zhangyuan21@xiaomi.com>
1. add lib_fork api in libs/libc, we need a fork() api to implement the
fork relative method, such as pthread_atfork
2. rename the assembly fork entry function name to up_fork(), and rename
the up_fork() to arch specific name, such as
sim_fork()/arm_fork()/mips_fork() etc.
Signed-off-by: guoshichao <guoshichao@xiaomi.com>
1. as we can use fork to implement vfork, so we rename the vfork to
fork, and use the fork method as the base to implement vfork method
2. create the vfork function as a libc function based on fork
function
Signed-off-by: guoshichao <guoshichao@xiaomi.com>
to avoid the infinite recusive dispatch:
*0 myhandler (signo=27, info=0xf3e38b9c, context=0x0) at ltp/testcases/open_posix_testsuite/conformance/interfaces/sigqueue/7-1.c:39
*1 0x58f1c39e in nxsig_deliver (stcb=0xf4e20f40) at signal/sig_deliver.c:167
*2 0x58fa0664 in up_schedule_sigaction (tcb=0xf4e20f40, sigdeliver=0x58f1bab5 <nxsig_deliver>) at sim/sim_schedulesigaction.c:88
*3 0x58f19907 in nxsig_queue_action (stcb=0xf4e20f40, info=0xf4049334) at signal/sig_dispatch.c:115
*4 0x58f1b089 in nxsig_tcbdispatch (stcb=0xf4e20f40, info=0xf4049334) at signal/sig_dispatch.c:435
*5 0x58f31853 in nxsig_unmask_pendingsignal () at signal/sig_unmaskpendingsignal.c:104
*6 0x58f1ca09 in nxsig_deliver (stcb=0xf4e20f40) at signal/sig_deliver.c:199
*7 0x58fa0664 in up_schedule_sigaction (tcb=0xf4e20f40, sigdeliver=0x58f1bab5 <nxsig_deliver>) at sim/sim_schedulesigaction.c:88
*8 0x58f19907 in nxsig_queue_action (stcb=0xf4e20f40, info=0xf4049304) at signal/sig_dispatch.c:115
*9 0x58f1b089 in nxsig_tcbdispatch (stcb=0xf4e20f40, info=0xf4049304) at signal/sig_dispatch.c:435
*10 0x58f31853 in nxsig_unmask_pendingsignal () at signal/sig_unmaskpendingsignal.c:104
*11 0x58f1ca09 in nxsig_deliver (stcb=0xf4e20f40) at signal/sig_deliver.c:199
*12 0x58fa0664 in up_schedule_sigaction (tcb=0xf4e20f40, sigdeliver=0x58f1bab5 <nxsig_deliver>) at sim/sim_schedulesigaction.c:88
*13 0x58f19907 in nxsig_queue_action (stcb=0xf4e20f40, info=0xf40492d4) at signal/sig_dispatch.c:115
*14 0x58f1b089 in nxsig_tcbdispatch (stcb=0xf4e20f40, info=0xf40492d4) at signal/sig_dispatch.c:435
*15 0x58f31853 in nxsig_unmask_pendingsignal () at signal/sig_unmaskpendingsignal.c:104
*16 0x58f1ca09 in nxsig_deliver (stcb=0xf4e20f40) at signal/sig_deliver.c:199
*17 0x58fa0664 in up_schedule_sigaction (tcb=0xf4e20f40, sigdeliver=0x58f1bab5 <nxsig_deliver>) at sim/sim_schedulesigaction.c:88
*18 0x58f19907 in nxsig_queue_action (stcb=0xf4e20f40, info=0xf40492a4) at signal/sig_dispatch.c:115
*19 0x58f1b089 in nxsig_tcbdispatch (stcb=0xf4e20f40, info=0xf40492a4) at signal/sig_dispatch.c:435
*20 0x58f31853 in nxsig_unmask_pendingsignal () at signal/sig_unmaskpendingsignal.c:104
*21 0x58f1ca09 in nxsig_deliver (stcb=0xf4e20f40) at signal/sig_deliver.c:199
*22 0x58fa0664 in up_schedule_sigaction (tcb=0xf4e20f40, sigdeliver=0x58f1bab5 <nxsig_deliver>) at sim/sim_schedulesigaction.c:88
*23 0x58f19907 in nxsig_queue_action (stcb=0xf4e20f40, info=0xf4049274) at signal/sig_dispatch.c:115
*24 0x58f1b089 in nxsig_tcbdispatch (stcb=0xf4e20f40, info=0xf4049274) at signal/sig_dispatch.c:435
*25 0x58f31853 in nxsig_unmask_pendingsignal () at signal/sig_unmaskpendingsignal.c:104
*26 0x58f1ca09 in nxsig_deliver (stcb=0xf4e20f40) at signal/sig_deliver.c:199
*27 0x58fa0664 in up_schedule_sigaction (tcb=0xf4e20f40, sigdeliver=0x58f1bab5 <nxsig_deliver>) at sim/sim_schedulesigaction.c:88
*28 0x58f19907 in nxsig_queue_action (stcb=0xf4e20f40, info=0xf4049244) at signal/sig_dispatch.c:115
*29 0x58f1b089 in nxsig_tcbdispatch (stcb=0xf4e20f40, info=0xf4049244) at signal/sig_dispatch.c:435
*30 0x58f31853 in nxsig_unmask_pendingsignal () at signal/sig_unmaskpendingsignal.c:104
*31 0x58f1ca09 in nxsig_deliver (stcb=0xf4e20f40) at signal/sig_deliver.c:199
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
1. Get the value of sp from dump regs when an exception occurs,
to avoid getting the value of fp from up_getsp and causing
incomplete stack printing.
2. Determine which stack the value belongs to based on the value
of SP to avoid false reports of stack overflow
Signed-off-by: zhangyuan21 <zhangyuan21@xiaomi.com>
CURRENT_REGS may change during assert handling, so pass
in the 'regs' parameter at the entry point of _assert.
Signed-off-by: zhangyuan21 <zhangyuan21@xiaomi.com>
In the lower half UART driver for PIC32MZ architecture, adding the
TIOCxBRK ioctl calls, which allow an application to transmit a UART
line BREAK signal.
This architecture does not support BSD-style BREAK in hardware so our
implementation follows the precedent set in STM32, GD32, and Kinetis
architectures: By default, if only PIC32MZ_UART_BREAKS is configured,
we produce the hardware-native BREAK, which lasts for 12 bit lengths;
if, in addition, PIC32MZ_SERIALBRK_BSDCOMPAT is configured, we
generate a BSD-style BREAK by putting the TX pin in GPIO mode and
driving it low "manually" until told to stop.
* arch/mips/src/pic32mz/Kconfig
(config PIC32MZ_UART_BREAKS): New. Appears as
CONFIG_PIC32MZ_UART_BREAKS in code.
(config PIC32MZ_SERIALBRK_BSDCOMPAT): New. Appears as
CONFIG_PIC32MZ_SERIALBRK_BSDCOMPAT in code.
* arch/mips/src/pic32mz/hardware/pic32mz_pps.h
(__PPS_OUTPUT_REGADDR_TO_GPIO, PPS_OUTPUT_REGADDR_TO_GPIO): New
macros to automatically determine the GPIO port and pin from the
corresponding PPS (Peripheral Pin Select) define. Since there is a
one-to-one correspondence between PPS output mappings and a single
port and pin, these macros avoid writing redundant pin mappings. We
use this when switching the TX pin from UART to GPIO to generate
the BREAK and we could use it in other peripheral drivers in the
future to override hardware behavior.
* arch/mips/src/pic32mz/pic32mz_serial.c
(struct up_dev_s): Add new field 'brk' to indicate line break in
progress when built with PIC32MZ_UART_BREAKS. If generating BSD-
compatible BREAKs, also add tx_gpio, tx_pps_reg, and tx_pps_val, to
let us toggle the pin between UART and GPIO modes.
(up_ioctl): Add cases for TIOCSBRK and TIOCCBRK to turn BREAK on and
off, with both hardware-native and BSD-compatible implementations.
This is similar to the STM32F7 implementation.
(up_txint): Block enabling TX interrupt if line break in progress.
This is similar to the STM32F7 implementation.
The PIC32MZ architecture provides a Peripheral Pin Select (PPS) which
allows mapping peripherals to different GPIO pins. To map a peripheral
output, a value is programmed to a register called RPnxR, where n is
the GPIO port (A thru K) and x is the GPIO pin (0 thru 15). The names
of these registers in code are PIC32MZ_RPnxR. However, in various
definitions, these were mistakenly written as PI32MZ_RPnxR (missing C
in PIC32). This prevents using any of the affected mappings. This
issue is fixed by repairing the define names.
* arch/mips/src/pic32mz/hardware/pic32mzec_pps.h,
arch/mips/src/pic32mz/hardware/pic32mzef_pps.h:
(): s/PI32MZ/PIC32MZ/g
The defines for Peripheral Pin Select (PPS) register RPE5R were called
RPE4R inadvertently; however, mappings elsewhere in the file used the
correct name of RPE5R, so the build would break if anyone attempted to
map those peripherals to GPIO pin E5. This issue is now fixed.
* arch/mips/src/pic32mz/hardware/pic32mzec_pps.h,
arch/mips/src/pic32mz/hardware/pic32mzef_pps.h:
(PIC32MZ_RPE4R_OFFSET): Rename to PIC32MZ_RPE5R_OFFSET.
(PIC32MZ_RPE4R): Rename to PIC32MZ_RPE5R.
Previously, it was impossible to build for PIC32MZ architecture with
CONFIG_SERIAL_TERMIOS because it introduced compiler errors in the
lower half driver.
Fixing the compiler errors and adding an implementation of the
TIOCSERGSTRUCT, TCGETS, and TCSETS ioctl calls.
* arch/mips/src/pic32mz/pic32mz_serial.c
(): Include nuttx/fs/ioctl.h, needed for the TIOCSERGSTRUCT, TCGETS,
and TCSETS defines.
(up_ioctl): Fix compile breakage. Implement TIOCSERGSTRUCT. Make
TCGETS return data bits, parity, and stop bits. Make TCSETS apply
changes to data bits, parity, and stop bits.
