patacongo
|
09e07d6550
|
Fix STM32 SPI3 remap logic
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5200 42af7a65-404d-4744-a932-0658087f49c3
|
2012-09-27 20:15:24 +00:00 |
|
patacongo
|
8a0899a695
|
STM32 fixes for DM9161 PHY; Enhancements for ADS7843e touchscreen controller
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5199 42af7a65-404d-4744-a932-0658087f49c3
|
2012-09-27 19:26:18 +00:00 |
|
patacongo
|
6a744b77a0
|
Definitions for ARMv7-M AIRCR register, Fixes for ADS7843 and SSD1289 driver, Missing build logic for examples/watchdog
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5198 42af7a65-404d-4744-a932-0658087f49c3
|
2012-09-27 15:29:53 +00:00 |
|
patacongo
|
26ffdc5524
|
Fixes for clean compilation of NxWidgets/NxWM with Kconfig and changes to build system; Fixes to Shenzhou NxWM configuration for clean build
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5193 42af7a65-404d-4744-a932-0658087f49c3
|
2012-09-26 14:36:28 +00:00 |
|
patacongo
|
441cfb82db
|
Corrections for SD card on Shenzhou board
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5183 42af7a65-404d-4744-a932-0658087f49c3
|
2012-09-24 18:57:38 +00:00 |
|
patacongo
|
801e07e135
|
Fixes STM32F107 DMA issue
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5182 42af7a65-404d-4744-a932-0658087f49c3
|
2012-09-24 15:51:48 +00:00 |
|
patacongo
|
325e6dca8d
|
Shenzhou PHY address should be 0; make sure the F2/F4 bits are not set when using STM32 ethernet driver with F1
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5181 42af7a65-404d-4744-a932-0658087f49c3
|
2012-09-23 15:22:27 +00:00 |
|
patacongo
|
d0fe6e4509
|
Add missing STM32 F1 pin remapping definitions
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5180 42af7a65-404d-4744-a932-0658087f49c3
|
2012-09-22 22:25:21 +00:00 |
|
patacongo
|
52877875b3
|
STM32 Ethernet, Slightly differ register layout for DM9161AEP PHY
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5177 42af7a65-404d-4744-a932-0658087f49c3
|
2012-09-22 19:19:56 +00:00 |
|
patacongo
|
3a818c18d2
|
Shenzhou board uses RMII PHY interface, not MII
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5176 42af7a65-404d-4744-a932-0658087f49c3
|
2012-09-22 16:48:44 +00:00 |
|
patacongo
|
69ca9d53c4
|
Make the Olimex stm32 p107 clock configuratin the standard for connectivity line devices
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5175 42af7a65-404d-4744-a932-0658087f49c3
|
2012-09-22 15:12:50 +00:00 |
|
patacongo
|
e44e4f8f31
|
Recent I2C changes for F4 broke F1
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5170 42af7a65-404d-4744-a932-0658087f49c3
|
2012-09-21 17:55:08 +00:00 |
|
patacongo
|
d4513b1e64
|
Oops.. the up_i2creset function mysteriously disappeared from stm32_i2c.c
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5167 42af7a65-404d-4744-a932-0658087f49c3
|
2012-09-20 13:55:31 +00:00 |
|
patacongo
|
c4b2ce70ba
|
Fix ENC28J60 Tx transmit (still a receive problem); Add HTTP 408 logic from Kate
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5158 42af7a65-404d-4744-a932-0658087f49c3
|
2012-09-17 23:02:58 +00:00 |
|
patacongo
|
7a2692df6a
|
Resync new repository with old repo r5166
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5154 42af7a65-404d-4744-a932-0658087f49c3
|
2012-09-17 18:35:37 +00:00 |
|
patacongo
|
5f470bd756
|
Add XML RPC server plus NXWM build fixes from Max Holtzberg
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5150 42af7a65-404d-4744-a932-0658087f49c3
|
2012-09-14 14:07:21 +00:00 |
|
patacongo
|
3fcb8d9d6c
|
Fixes for z80 compilation with SDCC toolchain. There are still a few header file and linker issues
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5149 42af7a65-404d-4744-a932-0658087f49c3
|
2012-09-13 22:04:47 +00:00 |
|
patacongo
|
50321df42d
|
Remove executable property from source and make files
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5146 42af7a65-404d-4744-a932-0658087f49c3
|
2012-09-13 18:46:10 +00:00 |
|
patacongo
|
7a9457bb07
|
Email address change in nuttx/
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5145 42af7a65-404d-4744-a932-0658087f49c3
|
2012-09-13 18:32:24 +00:00 |
|
patacongo
|
b19a1869ec
|
USB device drivers: Add hooks to to use common, external DMA buffer allocation implementation..
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5142 42af7a65-404d-4744-a932-0658087f49c3
|
2012-09-13 14:14:18 +00:00 |
|
patacongo
|
3174ce14b9
|
AVR corrections from Richard Cochran; uIP webserver enhancements from Kate
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5126 42af7a65-404d-4744-a932-0658087f49c3
|
2012-09-11 13:19:59 +00:00 |
|
patacongo
|
0fcb7e439a
|
The M3 Wildfire port is code complete and ready for test
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5125 42af7a65-404d-4744-a932-0658087f49c3
|
2012-09-10 22:26:37 +00:00 |
|
patacongo
|
3800458aa5
|
More progress on the Wildfire STM32 port
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5121 42af7a65-404d-4744-a932-0658087f49c3
|
2012-09-09 21:48:25 +00:00 |
|
patacongo
|
52150a94d9
|
Reconfigured Shenzhou to use JTAG. Misc Kconfig changes
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5118 42af7a65-404d-4744-a932-0658087f49c3
|
2012-09-09 15:43:18 +00:00 |
|
patacongo
|
6bfb80eb9e
|
Remove some old logic in the arm, x86, hc, and sh linker scripts that was kicked off when CONFIG_BOOT_RUNFROMFLASH=y.
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5117 42af7a65-404d-4744-a932-0658087f49c3
|
2012-09-08 19:13:29 +00:00 |
|
patacongo
|
020d68828f
|
Kconfig: QEMU fixes
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5116 42af7a65-404d-4744-a932-0658087f49c3
|
2012-09-08 18:57:57 +00:00 |
|
patacongo
|
6df2a23f84
|
Changes to get a clean compile with the Kconfig Shenzhou board. Still some link issues
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5115 42af7a65-404d-4744-a932-0658087f49c3
|
2012-09-08 16:40:12 +00:00 |
|
patacongo
|
a93d7eb69e
|
Shenzhou board is first to use ONLY Kconfig for configuration
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5114 42af7a65-404d-4744-a932-0658087f49c3
|
2012-09-08 13:56:21 +00:00 |
|
patacongo
|
3eae5ef842
|
Kconfig: Standardize board LED and button configurations
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5112 42af7a65-404d-4744-a932-0658087f49c3
|
2012-09-08 03:31:46 +00:00 |
|
patacongo
|
9cdecdc739
|
More info for the Shenzhou board configuration
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5109 42af7a65-404d-4744-a932-0658087f49c3
|
2012-09-07 22:30:35 +00:00 |
|
patacongo
|
5b268e4dab
|
Removed delay after receiving in recvfrom(). This was killing network performance
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5107 42af7a65-404d-4744-a932-0658087f49c3
|
2012-09-07 16:51:53 +00:00 |
|
patacongo
|
931d7909f5
|
If serial DMA enabled, re-initialize serial console
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5106 42af7a65-404d-4744-a932-0658087f49c3
|
2012-09-07 13:35:58 +00:00 |
|
patacongo
|
bc6a1aae2b
|
Repairs needed after Kconfig changes for LPC31
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5105 42af7a65-404d-4744-a932-0658087f49c3
|
2012-09-06 22:25:51 +00:00 |
|
patacongo
|
2a6c280b7a
|
Add LPC31 Kconfig
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5104 42af7a65-404d-4744-a932-0658087f49c3
|
2012-09-06 20:08:25 +00:00 |
|
patacongo
|
116eff92b5
|
Update LPC43 Kconfig
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5103 42af7a65-404d-4744-a932-0658087f49c3
|
2012-09-06 15:38:53 +00:00 |
|
patacongo
|
3ad95c590b
|
configure.sh: Don't append the apps directory path setting if the correct setting is already in defined in the defconfig file.
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5101 42af7a65-404d-4744-a932-0658087f49c3
|
2012-09-06 01:19:05 +00:00 |
|
patacongo
|
d869cc4ef7
|
STM32 Kconfig looks good. STM32 external ram configuration changed.
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5100 42af7a65-404d-4744-a932-0658087f49c3
|
2012-09-05 23:02:43 +00:00 |
|
patacongo
|
2adee9fd7a
|
LPC17xx Kconfig looks good
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5099 42af7a65-404d-4744-a932-0658087f49c3
|
2012-09-05 21:36:03 +00:00 |
|
patacongo
|
7da3478d1e
|
Update LPC17 Kconfig
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5097 42af7a65-404d-4744-a932-0658087f49c3
|
2012-09-05 19:11:39 +00:00 |
|
patacongo
|
ca73061269
|
Add configuration for the LM3S
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5095 42af7a65-404d-4744-a932-0658087f49c3
|
2012-09-05 17:50:53 +00:00 |
|
patacongo
|
08ef9d0367
|
Add Kconfig settings for the LPC17xx
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5094 42af7a65-404d-4744-a932-0658087f49c3
|
2012-09-05 17:20:19 +00:00 |
|
patacongo
|
e3f1d80ed6
|
Refactor serial configuratin; AVR teensy Kconfig now builds
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5092 42af7a65-404d-4744-a932-0658087f49c3
|
2012-09-05 12:45:35 +00:00 |
|
patacongo
|
59588247bf
|
Kconfig changes + back out part of last check-in: The 2STOP setting must be integer 0/1, not boolean
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5086 42af7a65-404d-4744-a932-0658087f49c3
|
2012-09-04 15:28:56 +00:00 |
|
patacongo
|
17e0c5198e
|
Changes to Kconfig and matching defconfig files
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5085 42af7a65-404d-4744-a932-0658087f49c3
|
2012-09-04 14:43:56 +00:00 |
|
patacongo
|
c67f7bf1b4
|
Back out the last STM32 SDIO DMA change. It is incorrect
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5084 42af7a65-404d-4744-a932-0658087f49c3
|
2012-09-04 12:35:47 +00:00 |
|
patacongo
|
7cce8d8e89
|
Oops... bits in region mask are inverted
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5083 42af7a65-404d-4744-a932-0658087f49c3
|
2012-09-04 03:06:47 +00:00 |
|
patacongo
|
afc05350eb
|
STM32 SDIO DMA should only 16-bits wide when DMA-ing to/from FSMC SRAM
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5082 42af7a65-404d-4744-a932-0658087f49c3
|
2012-09-04 02:47:46 +00:00 |
|
patacongo
|
561bea0899
|
Add support for multiple work queues
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5081 42af7a65-404d-4744-a932-0658087f49c3
|
2012-09-04 00:54:09 +00:00 |
|
patacongo
|
8ffb1702ea
|
Add USB host support to the STM32F4Discovery board
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5066 42af7a65-404d-4744-a932-0658087f49c3
|
2012-08-29 17:41:43 +00:00 |
|
patacongo
|
0d8340cdc0
|
I think the STM32 UST OTG FS host driver is finally finished
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5065 42af7a65-404d-4744-a932-0658087f49c3
|
2012-08-28 23:36:58 +00:00 |
|