iC-JX expander has NINT (not interrupt) pin that goes to logical zero
if interrupt occurs. This commit adds support for iC-JX options settings
that allows to enable the interrupt for defined input pins.
The interrupt is handled in HP worker thread to avoid waiting for SPI
transfers in interrupt context. Board has to configure interrupt event
for GPIO pin connected to NINT.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
Fix default_value of ioctl(VIDIOC_QUERYCTRL)(id=V4L2_CID_3A_STATUS)
to AE operating and AWB operating, because both AE and AWB are
automatical adjustment mode by default.
Because the exposure time and ISO sensitivity are adjusted automatically
by default, the default value can not be defined.
So, return the value out of range as the default_value of
ioctl(VIDIOC_QUERYCTRL).
which is useful in the m2m usage scenario, by replacing the first
argument of callback from "struct v4l2_ops_s *" to "struct file *"
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
In SMP mode, up_cpu_index()/this_cpu() are the same, both return the index of the physical core.
In AMP mode, up_cpu_index() will return the index of the physical core, and this_cpu() will always return 0
| #ifdef CONFIG_SMP
| # define this_cpu() up_cpu_index()
| #elif defined(CONFIG_AMP)
| # define this_cpu() (0)
| #else
| # define this_cpu() (0)
| #endif
Signed-off-by: chao an <anchao@lixiang.com>
This commit implements functions icjx_multireadpin and icjx_multiwritepin.
These functions can be used for multiple pin access (read/write) if
CONFIG_IOEXPANDER_MULTIPIN is selected. This access is generally
faster than one by one pin and may simplify user application.
Changes to general functions icjx_read and icjx_write were also required
to provide support for multiple data send/receive.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
This driver is based on ESP32 TWAI CAN drivers currently available
in Nuttx, and captures the differences currently present across the
TWAI drivers for easy future adaption to remaining ESP32 platforms
with no loss of support/function. Also provides a generic SJA1000 CAN
driver solution that is CPU-architecture independent.
Changes:
- Low-level driver re-written to allow usage independent of CPU
architecture, and support both SJA1000 and TWAI CAN controllers.
- Platform-specific settings abstracted away to be provided by board
layer.
- Support for multiple instances of SJA1000 driver.
if driver complete unlink ops, we need to call it to release some resource,
otherwise, it will only remove inode.
Signed-off-by: dongjiuzhu1 <dongjiuzhu1@xiaomi.com>
Adjust the v4l2 framework to support both capture and v4l2m2m,
and can easily add other v4l2 features.
Signed-off-by: shizhenghui <shizhenghui@xiaomi.com>
Because the ratio between API value and ISX019 register value
is 128 : 90 about HUE, some different API values become the
same register value.
So, store the value specified by application in setting,
and return the stored value in getting so that the gotten value
is the same as the setting value by application.
About IMGSENSOR_ID_EXPOSURE_AUTO, IMGSENSOR_ID_ISO_SENSITIVITY_AUTO,
and IMGSENSOR_ID_EXPOSURE_METERING, enumerations are defined.
So, control type should be not integer but integer menu.
About parameter whose register size is less than 4 bytes,
when transfer read value to API parameter, cast appropriately
to avoid the following problems.
- Read value includes garbage value
- Negative value becomes huge positive value
Modify control id definition to avoid duplication even if
the control ids belong to the same control class.
Also, not refer to control class in driver.
Taring was done with user defined sign, which later resulted in tare
being "resigned" twice. Because of that taring was workign correctly
for one sign, and not the other.
Fix it to disable user sign when tarring, and tare always without
changing sign.
Signed-off-by: Michał Łyszczek <michal.lyszczek@bofc.pl>
ptype of ((int32_t)0 * (uint32_t)0) is (unsigned). "i" counter was
declared unsigned to not make comparision with "unsigned char" in for loop.
This resulted in calculation in average to be implicitly casted to unsigned,
and when negative number was added to it, it turned into huge value.
Change type of "i" to signed, and just cast (unsigned char) to (int)
to fix this.
Signed-off-by: Michał Łyszczek <michal.lyszczek@bofc.pl>
Use private naming to avoid conflicts with user applications
In file included from libuv/src/unix/internal.h:25,
from libuv/src/unix/udp.c:23:
libuv/src/uv-common.h:57: warning: "container_of" redefined
57 | #define container_of(ptr, type, member) \
|
In file included from nuttx/include/nuttx/list.h:47,
from nuttx/include/nuttx/tls.h:40,
from nuttx/include/nuttx/sched.h:48,
from nuttx/include/nuttx/arch.h:87,
from nuttx/include/nuttx/userspace.h:35,
from nuttx/include/nuttx/mm/mm.h:30,
from nuttx/include/nuttx/kmalloc.h:34,
from nuttx/include/nuttx/lib/lib.h:31,
from nuttx/include/stdio.h:35,
from apps/system/libuv/libuv/include/uv.h:59,
from libuv/src/unix/udp.c:22:
nuttx/include/nuttx/nuttx.h:48: note: this is the location of the previous definition
48 | #define container_of(ptr, type, member) \
|
Signed-off-by: chao an <anchao@lixiang.com>
In the previous patch, we moved rptun_panic and rptun_dump_all in rptun to rpmsg.
In order to ensure CI pass, this two API in rptun is not removed. So we remove rptun_panic and rptun_dump_all in this patch.
Signed-off-by: wangyongrong <wangyongrong@xiaomi.com>
The board's microphone uses 24-bit i2s and this commit also fixes
the segmentation fault caused by the audio buffer overflow.
arch/xtensa/src/esp32/esp32_i2s.c: Fix bug regarding 24-bit audio and add AUDIOIOC_STOP to ioctl
drivers/audio/audio_i2s.c: Report number of channels on AUDIOIOC_GETCAPS
in boards/xtensa/esp32/esp32-sparrow-kit:
/configs/nsh/defconfig: Add I2S configs
/src/esp32-sparrow-kit.h: Add the signature of esp32_i2sdev_initialize()
/src/esp32_bringup.c: Add call to esp32_i2sdev_initialize()
Signed-off-by: simonatoaca <simona.alexandra2000@gmail.com>
since clock_t may map to either 32-bit or 64-bit integer type,
UINT_MAX may not be the maximum value of clock_t.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
rpmsg_ping.c is blocking CI checks for RPTUN related patches like #11673.
this patch simply fix the compilation issue of rpmsg_ping.c:
- line 191: overflow conversion from "long unsigned int" to "unsigned int"
- line 226: "sendlen" used uninitialized
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
ALT1250 driver sends an event named LTE_CMDID_RESTARTAPI
to ALT1250 daemon when state is PM_NOARMAL in the function
of prepare registered by pm_register.
It should be possible to use ping without rptun being enabled, so striped rptun_ping out of rptun and rename to rpmsg_ping.
Signed-off-by: wangyongrong <wangyongrong@xiaomi.com>
Squashed commits:
1. Porting prior PCI work in place of jailhouse code
At this point the PCI enumeration works for x86_64 including over
pci-pci bridges.
Running QEMU with this configuration we see the bridge and the
device on the bridge. It also detected the qemu test device
qemu-system-x86_64 \
-cpu host,+pcid,+x2apic,+tsc-deadline,+xsave,+rdrand \
--enable-kvm -smp 1 -m 2G -cdrom boot.iso --nographic -no-reboot \
-device pci-testdev \
-device pci-bridge,id=bridge0,chassis_nr=2 \
-device e1000,bus=bridge0,addr=0x3
qemu_pci_init: Initializing PCI Bus
pci_probe_device: [00:00.0] Found 8086:1237, class/revision 06000002
pci_probe_device: [00:01.1] Found 8086:7010, class/revision 01018000
pci_probe_device: [00:01.2] Found ffff:ffff, class/revision ffffffff
pci_probe_device: [00:01.3] Found 8086:7113, class/revision 06800003
pci_probe_device: [00:01.4] Found ffff:ffff, class/revision ffffffff
pci_probe_device: [00:01.5] Found ffff:ffff, class/revision ffffffff
pci_probe_device: [00:01.6] Found ffff:ffff, class/revision ffffffff
pci_probe_device: [00:01.7] Found ffff:ffff, class/revision ffffffff
pci_probe_device: [00:02.0] Found 1234:1111, class/revision 03000002
pci_probe_device: [00:03.0] Found 8086:100e, class/revision 02000003
pci_probe_device: [00:04.0] Found 1b36:0005, class/revision 00ff0000
pci_probe_device: [00:04.0] Probing
pci_check_pci_bridge: [00:05.0] Found Bridge
pci_probe_device: [01:03.0] Found 8086:100e, class/revision 02000003
pci_probe_device: [00:05.0] Found 1b36:0001, class/revision 06040000
2. Remove unused CONFIG_PCI_MAX_BDF option
3. Add a workaround for Jailhouse pci scanning
4. Extend BAR parsing and handle PIO and MMIO for pci-testdev
Signed-off-by: Brennan Ashton <bashton@brennanashton.com>
5. PCI: Add initial support for QEMU 'edu' test device
Signed-off-by: Brennan Ashton <bashton@brennanashton.com>
6. Bring up PCI later in boot process
Signed-off-by: Brennan Ashton <bashton@brennanashton.com>
7. Add ISR and DMA support to QEMU edu test pci device
Signed-off-by: Brennan Ashton <bashton@brennanashton.com>
8. Fix bad function prototype definition in qemu_edu
9. intel64: Add a pci test configuration and instructions
Signed-off-by: Brennan Ashton <bashton@brennanashton.com>
10. PCI: Fix issue in identification of 64bit bar
Signed-off-by: Brennan Ashton <bashton@brennanashton.com>
Squashed commits:
1. x86_64: qemu: implement pci-e functions and enumerate pci-e devices on boot
2. virt: add qemu pci-testdev driver
3. pcie: types array should be null terminated
4. pcie: enable don't take flags, hardcoded enabling flags
5. pcie: checking bar > 4 for 64bit bars are sufficient
6. pcie: qemu: remove not used header
7. pcie: qemu: return -EINVAL if buffer argument is NULL
8. pcie: make pcie enumerate routine as common instead of architecture dependent
9. pcie: cosmetic changes to fit check tools
10. pcie: create MSI/MSIX related marcos and simplify the msi/msix routines
This commit adds basic support for iC-JX expander in SPI mode. The
expander is functional and supports both input and output pins. Further
expander functionalities (filtering, adc, interrupt support) are not
yet implemented.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
This slightly revised the USB host documentation and fixed typos
encountered in the document and some source files.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
This change adds support for the USB Transport Layer as described
in the bluetooth spec. Isochronous endpoints are not yet supported.
Because of limitations in the NuttX bluetooth stack, only one USB
device can be used. This driver will only allow one USB dongle to
use bluetooth.
A Laird USB BT4.2 dongle (from Mouser) was used for testing:
M/N BT851 1.0 1829, FCC ID:SQGBT850
lsusb: 04b4:f901 Cypress Semiconductor Corp. CYW20704A2
The following commands were used to test from the nsh prompt:
bt bnep0 scan start
bt bnep0 scan stop
bt bnep0 scan get
bt bnep0 info
The Linux gatttool was used to connect over wireless.
With the BDAddr found by "bt bnep0 info", start gatttool using:
gatttool -b BDAddr -I
Connect to the device using:
connect
Read the device name using the GAP device name UUID:
char-read-uuid 2a00
Part of the response is:
value: 41 70 61 63 68 65 20 4e 75 74 74 58
which is the string "Apache NuttX"
nuttx/driver/rpmsg: new folder, extract common rpmsg api in rptun.c to rpmsg.c.
rpmsg provide rpmsg_ops to each backend for specific implementation.
Signed-off-by: wangyongrong <wangyongrong@xiaomi.com>
The length of some config elements are not equal to 1,2,4,8, so we can't
assert in virtio_mmio_config_read/write() direclty when length != 1,2,4,8
For example, in virtio_net_config from virtio spec v1.2
struct virtio_net_config {
u8 mac[6];
le16 status;
le16 max_virtqueue_pairs;
le16 mtu;
le32 speed;
u8 duplex;
u8 rss_max_key_size;
le16 rss_max_indirection_table_length;
le32 supported_hash_types;
};
The mac length is 6 and not equal to 1,2,4,8
Signed-off-by: Bowen Wang <wangbowen6@xiaomi.com>
Not found the mmio device is a normal case, so should not print the
error log.
This commit change the log level to info when not found the mmio
device.
Signed-off-by: Bowen Wang <wangbowen6@xiaomi.com>
The lower-half implementation of the RMT character driver based on
Espressif HAL enables using the RMT peripheral of ESP32, ESP32-S2
and ESP32-S3 as a common xtensa-based Espressif driver.
The RMT packages on Espressif SoCs are 4-byte long and are known as
"items". Please check the Techinal Reference Manual of the chip to
obtain more details.
Although the LED might be RGB-only, the LED data is packed in a
32-bit long variable and, then, this is the default size of a LED
pixel to define the 'WS2812_RW_PIXEL_SIZE' macro. Please note that
the lower-half driver will deal with the case of the addressable
LED being 3 or 4-pixel sized.
The RMT (Remote Control) character driver allows to use the RMT
peripheral (usually, a one-wire peripheral dedicated to driving
IR remote control) as a character driver.
Please note that this perpiheral depends on the lower-half specific
driver implementation.
Add a static port-based VLAN configuration for KSZ9477 switch. This doesn't
use the VLAN tagging, but is a switch's internal mechanism to simply configure
if the packet forwarding is allowed from one port to another.
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
In order to obtain best accuracy over temperature range,
particularly in low temperature, it is recommended to
compensate the non-linearity over the temperature.
ref: ENG_DS_MS5611-01BA03_B3.pdf
ENG_DS_MS5607-02BA03_B4.pdf
Signed-off-by: Takumi Ando <t-ando@advaly.co.jp>
In function 'unlock_evtbufinst',
inlined from 'parse_altcompkt' at modem/alt1250/alt1250.c:919:7,
inlined from 'altcom_recvthread' at modem/alt1250/alt1250.c:968:21:
Error: modem/alt1250/alt1250.c:385:3: error: 'inst' may be used uninitialized [-Werror=maybe-uninitialized]
385 | nxmutex_unlock(&inst->stat_lock);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
modem/alt1250/alt1250.c: In function 'altcom_recvthread':
modem/alt1250/alt1250.c:822:26: note: 'inst' was declared here
822 | FAR alt_evtbuf_inst_t *inst;
| ^~~~
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
The Goldfish FB register should be optimized by considering the need to pass in parameters for base and irq.
Signed-off-by: jianglianfang <jianglianfang@xiaomi.com>
The opening and closing of the window has been associated with the opening and closing of fb, but the LCD has not yet been optimized. The window will only open when sim_x11openwindow is called, and similarly, the window will only close when sim_x11closewindow is called.
Signed-off-by: jianglianfang <jianglianfang@xiaomi.com>
The `xxx_ipv6multicast` function in each driver is not adapted to
multiple IPv6 addresses yet, and they're redundant, so try to take them
into common code.
Change:
1. Add MAC `g_ipv6_ethallnodes` and `g_ipv6_ethallrouters` in
`icmpv6_devinit` and call them in `netdev_register`
2. Add multicast MAC for Neighbor Solicitation when adding any IPv6
address, and remove them when IPv6 address is removed
3. Select `NET_MCASTGROUP` when `NET_ICMPv6` because now we need
`d_addmac` when we have ICMPv6
Note:
We want modules outside net stack to call functions like
`netdev_ipv6_add` and never touch the related MAC address, so these MAC
functions are added as internal functions to `net/netdev/netdev.h`
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
and optimize the critical section usage
1.Remove the unnecessary critical section in ramlog_readnotify
2.Move the enter/leave critical section out of ramlog_pollnotify loop
3.Move the critical section of ramlog_addchar to caller
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
1.Remove RAMLOG_OVERWRITE option and related code
2.Broadcast the readability to all reader and poller
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
-The qemu wifi fucntion only supports the STA mode and the following
operations:
wapi mode wlan0 2
wapi scan wlan0
wapi psk wlan0 password 3
wapi essid wlan0 wifi_name 1
wapi show wlan0
wapi disconnect wlan0
-Eanble the virtual wifi function with the MACRO `CONFIG_DRIVERS_WIFI_SIM`.
Signed-off-by: liqinhui <liqinhui@xiaomi.com>
Refers to https://docs.oasis-open.org/virtio/virtio/v1.2/cs01/virtio-v1.2-cs01.html#x1-2230004
A driver SHOULD negotiate VIRTIO_NET_F_MAC if the device offers it.
If the driver negotiates the VIRTIO_NET_F_MAC feature, the driver MUST
set the physical address of the NIC to mac. Otherwise, it SHOULD use a
locally-administered MAC address.
Signed-off-by: liqinhui <liqinhui@xiaomi.com>
Commit 8a63d29c removed `devif_iob_send` from `udp_sendto_buffered`
workflow, `devif_iob_send` drops too big packet. Now we still need a
place to check the packet length, otherwise a packet larger than MTU
may be sent to the net driver.
In case of similar problem happens somewhere else, this commit also
adds a check in `netdev_upperhalf`, and count these cases into
`NETDEV_TXERRORS`.
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
Busy waiting in w25qxxxjv_erase_sector() was without nxsig_usleep and
was causing the entire system to freeze for significant amount of time
as sector erase takes some time.
This commit adds nxsig_usleep into busy waiting to prevent system lock.
Sleep is set to sector erase time based on W25Q series datasheet.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
we can use uart to debug nuttx,like debugger:
1. read/write memory
2. Use watchpoint,breakpoint,single step.
use up_debugpoint api
3. Ctrl+c to stop, continue, or single step.
hold uart send and receive
4. register a panic event, when crash or assert/panic, we use uart to
debug.
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
Add registration function instrumentation API,
which can achieve instrumentation of entering and
exiting functions through the compiler's functionality.
We can use CONFIG_ARCH_INSTRUMENT_ALL to add instrumentation for all
source, or add '-finstrument-functions' to CFLAGS for Part of the
source.
Notice:
1. use CONFIG_ARCH_INSTRUMENT_ALL must mark _start or entry noinstrument_function,
becuase bss not set.
2. Make sure your callbacks are not instrumented recursively.
use instrument_register to register entry function and exit function.
They will be called by the instrumented function
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
