To avoid losing the first frame, the set_buf needs to excute first. At the same time, imgdata->start_capture should excuted before the imgsensor->start_capture.
Signed-off-by: yaojingwei <yaojingwei@xiaomi.com>
The driver's main purpose is to support the porting of the open source
component optee_client (https://github.com/OP-TEE/optee_client) to nttux.
The basic function of the driver module is to convert the REE application layer data and send it to the TEE through rpmsg.
The main functions include
1 driver registration.
we need to register a device driver(/dev/tee0) through optee_register function.
2 open the driver
3 ioctl the driver
The ioctl command passes different parameters and commands, and interacts with the TEE through rpmsg.
4 close the driver
Signed-off-by: hujun5 <hujun5@xiaomi.com>
It may cause out_of_bounds when two side have different configuartion
on NAME_MAX and FS_LARGEFILE(affects size of blkcnt_t)
Signed-off-by: liaoao <liaoao@xiaomi.com>
it may cause use after free if server has removed block device before calling
its operations,such as:
server: rm /dev/testrpmsgblk
client: ls /dev/testrpmsgblk
Signed-off-by: liaoao <liaoao@xiaomi.com>
A segmentfault might happen when read/write/unlink ops called without an open
ops called because it bind ept's ops in rpmsgblk_open_handler.
proxy> rm /dev/ram1
segmentfault
proxy> ls /dev/ram1
segmentfault
Signed-off-by: liaoao <liaoao@xiaomi.com>
There are ICs available on the market that integrate various power inverter
features. The driver for such a device must be tightly coupled to a FOC device
as using it as a separate device doesn't make sense.
Openamp/libmetal's metal io operation used the atomic operation, but
in QEMU 8.1.2, the risc-v IO region is not allow to use atomic instruction
in SMP case.
Signed-off-by: Bowen Wang <wangbowen6@xiaomi.com>
Previous adjtime() implementation was limited to adjusting system
timer tick period. This commit reimplements the internals to use
a kernel watchdog timer. Platform-independent part of the code now
works also for adjusting hires RTC and tickless timer rate.
User code facing API is unchanged. Architecture code API has changed:
up_adj_timer_period() is replaced by up_adjtime().
Other improvements:
- Support query of remaining adjustment by passing NULL to first
argument of adjtime(). This matches Linux behavior.
- Improve resolution available for architecture driver, previously
limited to 1 microsecond per tick. Now 1 nanosecond per second.
In order to achieve better scalability, change the stride
from pixel mode to byte mode.For example, in the case of RGB888
mode with 466 pixels in width and a 4-byte aligned buffer,it is
only necessary to extend the buffer of one line from 1398 bytes
to 1400 bytes, instead of extending it to 1404 bytes.
Signed-off-by: rongyichang <rongyichang@xiaomi.com>
These values are board-specific properties that must be known on the application side.
Until now, these values had to be hardcoded on the application side.
When we record data and dump data, they are all executed within the system,
and there is no need to consider the issue of big or small endianness.
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
1. Supporting `SIOCSIFADDR` and `SIOCDIFADDR` with Linux in6_ifreq struct to manage ipv6 addresses.
Ref: https://man7.org/linux/man-pages/man7/netdevice.7.html
2. Supporting alias like 'eth0:0' for multiple IPv6 addresses, to keep previous ioctl `SIOCGLIFADDR`, `SIOCSLIFADDR`, `SIOCGLIFNETMASK` and `SIOCSLIFNETMASK` working.
Ref: https://man7.org/linux/man-pages/man8/ifconfig.8.html
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
Race condition if the remote proc is stoped during initialization phase
| #0 0x0249f959 in rpmsg_destroy_ept (ept=0xffffffc0) at open-amp/lib/rpmsg/rpmsg.c:376
| #1 0x024a938c in rpmsg_deinit_vdev (rvdev=0xf2303a48) at open-amp/lib/rpmsg/rpmsg_virtio.c:971
| #2 0x02117e33 in rptun_dev_stop (rproc=0xf2303a04, stop_ns=true) at rptun/rptun.c:891
| #3 0x021181d8 in rptun_do_ioctl (priv=0xf2303a00, cmd=11010, arg=0) at rptun/rptun.c:922
| #4 0x02119722 in rptun_ioctl_foreach (cpuname=0x0, cmd=11010, value=0) at rptun/rptun.c:1086
| #5 0x0211b9df in rptun_poweroff (cpuname=0x0) at rptun/rptun.c:1378
| #6 0x02053aa6 in board_power_off (status=0) at sim/sim_head.c:206
| #7 0x0253d65c in boardctl (cmd=65283, arg=0) at boardctl.c:400
| #8 0x021eb497 in cmd_poweroff (vtbl=0xef606280, argc=1, argv=0xef9b73e0) at nsh_syscmds.c:356
| #9 0x021cdb4d in nsh_command (vtbl=0xef606280, argc=1, argv=0xef9b73e0) at nsh_command.c:1164
| #10 0x021baa72 in nsh_execute (vtbl=0xef606280, argc=1, argv=0xef9b73e0, redirfile=0x0, oflags=0) at nsh_parse.c:845
| #11 0x021c6b0a in nsh_parse_command (vtbl=0xef606280, cmdline=0xef606708 "poweroff") at nsh_parse.c:2744
| #12 0x021c7166 in nsh_parse (vtbl=0xef606280, cmdline=0xef606708 "poweroff") at nsh_parse.c:2828
| #13 0x0221fa2f in nsh_session (pstate=0xef606280, login=1, argc=1, argv=0xef7a7860) at nsh_session.c:245
| #14 0x021f8c04 in nsh_consolemain (argc=1, argv=0xef7a7860) at nsh_consolemain.c:75
| #15 0x021b77eb in nsh_main (argc=1, argv=0xef7a7860) at nsh_main.c:74
| #16 0x02166ddf in nxtask_startup (entrypt=0x21b76ca <nsh_main>, argc=1, argv=0xef7a7860) at sched/task_startup.c:70
| #17 0x020b363c in nxtask_start () at task/task_start.c:134
Signed-off-by: chao an <anchao@xiaomi.com>
In `drivers/rptun/rptun.c`, we have a `rptun_is_recursive` function,
which lets rptun thread run recursively. Then the `usrsock_rpmsg_ept_cb`
may be called inside `usrsock_rpmsg_ept_cb`, which can cause some
unexpected behavior, so we add a queue to keep the order of incoming
messages to reduce the complexity.
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
