base/time/time_exploded_posix.cc:190:14: error: ‘struct tm’ has no member named ‘tm_zone’; did you mean ‘tm_mon’?
190 | timestruct.tm_zone = nullptr; // not a POSIX field, so mktime/timegm ignore
| ^~~~~~~
| tm_mon
Change-Id: I9f93e63b50c0692a7a2bfc47abd9d07aa2c8e8db
Signed-off-by: chao.an <anchao@xiaomi.com>
This implements the missing callback hooks nrf52_spi0/1/2/3register
that are usually used with mmcsd for card detection.
This also stubs out the missing spi trigger function which is not
used on this platform.
The card detect was tested with the nRF52-feather board and a
modified KeyBoard FeatherWing.
Signed-off-by: Brennan Ashton <bashton@brennanashton.com>
1. There is difference about symbol replace on nuttx-names.in
between MacOS & Linux
2. For MacOS, if open '-fvisibility=hidden' and adjust nuttx-names.in,
it will meet symbol link-back-to-nuttx error.
3. Make the MacOS replace behaviour, same with Linux
Note:
MacOS should install objcopy with command:
$ brew install binutils
$ export PATH=$PATH:/usr/local/opt/binutils/bin
already check in to cibuild.sh
Change-Id: If78b784cc0ecb98cdbf7091de38acef00a8a02f3
Signed-off-by: ligd <liguiding1@xiaomi.com>
This patch resolves to bugs in the GPIO interrupt logic:
1. Any pins did not have STMPE811_GPIO_RISING in their pincfg
would clear the rising edge interrupt enable flag for all
pins due to a masking bug.
2. Pins would never trigger a second interrupt. There is an
undocumented requirement that you have to clear both the
GPIO interrupt status register __and__ also the edge
detection status register. Failure to clear either of
these will result in no further interrupts being triggered.
This requirement exists both for edge and level modes of
operation.
Signed-off-by: Brennan Ashton <bashton@brennanashton.com>
Summary:
- This commit applies NET_LL_IEEE80211 to gs2200m.c
- Also selects DRIVERS_IEEE80211 in Kconfig
Impact:
- Affects use cases with gs2200m driver
Testing:
- Tested with spresense:wifi and spresense:wifi_smp
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
The WS2812 is very common in LED strips as it is an integrated
controller and LED. It is driven by a single data line, but
the timing requirements can be met by using most SPI controllers
and the use of DMA.
This driver has been validated on the nRF52 arch both with a
single LED and a strip of 144.
Signed-off-by: Brennan Ashton <bashton@brennanashton.com>
and remove the special handling in the stack dump
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Ia1ef9a427bd4c7f6cee9838d0445f29cfaca3998
This works by having the build system look for nuttx/external/Kconfig
to determine whether this directory is present or not. nuttx/external
is gitignored in order to be added by the final user but not to be
commited into the repo. Tipically this will by a symbolic link, just like
apps/external.
Inside external/ a Makefile should be placed with the same structure
than any nuttx/ subdirectory (eg: nuttx/drivers/). The
nuttx/external/Kconfig will be sourced and any options defined there will
appear at the bottom of menuconfig (unless options are conditioned on
menus, in which case they will appear accordingly).
The purpose is to allow arch/board independent code, which for any
reason is not to be upstreamed (propietary, not relevant for mainline,
testing, etc), to be built into the OS during OS building stage. This
way the user does not need to fork the NuttX repo to do so. This feature
complements well with external apps and custom board support.
