sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
50,235 Commits 1 Branch 0 Tags 291 MiB
1adef07a79
Commit Graph

103 Commits

Author SHA1 Message Date
Gregory Nutt
8bc90a1899 This adds basic architectural support for the LPC546xx family and includes support for the LPCXpresso-LPC54628 board. The basic NSH port is almost complete... still lacking GPIO support and LED support. There are still no significant drivers available. 
Squashed commit of the following:

    arch/arm/src/lpc54xx:  Finish off some missing logic.  Complete now execpt for GPIO and LED support.
    arch/arm/src/lpc54xx:  Add lpc54_clrpend.c
    arch/arm/src/lpc54xx:  Serial driver is complete and compiles.
    arch/arm/src/lpc54xx:  Add beginning of a serial driver (still missing some logic)
    arch/arm/src/lpc54xx:  Fleshes out low level USART intialization.
    arch/arm/src/lpc546xx/Kconfig: Add hooks to integrate with common seril upper half.
    arch/arm/src/lpc54xx:  Beginning of USART console support.
    arch/arm/src/lpc54xx: Completes very basic clock configuration.
    arch/arm/src/lpc54xx:  Add clocking logic (still not complete)
    arch/arm/src/lpc54xx:  Beginning of PLL configuration logic.
    arch/arm/src/lpc54xx:  Fix a few things from first compile attempt.  Compilation cannot work until I at least finish the clock configuration logic.
    arch/arm/src/lpc54xx: Addes some SysTick logic.
    arch/arm/src/lpc54xx:  Completes basic startup logic (sans clock configuration) and interrupt configuration.
     arch/arm/src/lpc54xx:  Add generic ARMv7-M start-up logic (needs LPC54628 customizations); add emtpy file that will eventually hold the clock configuration logic.
    arch/arm/src/lpc54xx:  Add (incomplete) SYSCON register definition header file.
    arch/arm/src/lpc54xx:  Add FLEXCOMM header file.
    arch/arm/src/lpc54xx:  Bring in tickless clock logic from LPC43; configs/lpcxpresso-lpc54628: mount procfs if enabled.
    arch/arm/src/lpc54xx: Add RIT clock definitions; add SysTick initialization (not finished)
    LPC54xx and LPCXpresso-LPC54628: add more boilerplate files and stubbed out files.
    arch/arm/src/lpc54xx:  Add (incomplete) USART header file.
    Add another condition to a Kconfig; refresh a defconfig.
    arch/arm/src/lpc54xx/chip: Add LPC54628 memory map header files.
    configs/lpcxpresso-lpc54628:  Add basic build files for the LPCXpresso-LPC54628
    arch/: Basic build directory structure for the LPC54628
 2017-12-07 13:30:02 -06:00
Gregory Nutt
85a1a3cc98 drivers/usbdev: Correct input flow control logic when watermarks are not enabled. Problem not by and change based on suggestion by Juha Niskanen. 2017-10-18 06:49:11 -06:00
Jussi Kivilinna
e2702cbe4e STM32F7: fix UART7 and UART8 IFLOWCONTROL options 2017-04-06 08:46:24 -06:00
Gregory Nutt
10fff9011a Move include/nuttx/configdata.h to include/nuttx/mtd/configdata.h 2016-07-21 13:34:54 -06:00
Gregory Nutt
2cacc6204a Kconfig: If Pseudo-terminals are enabled, then pipes must be selected as well 2016-07-19 14:26:40 -06:00
Gregory Nutt
318f34fb7d Psuedo-terminal pipe size is now configurable 2016-07-19 14:26:41 -06:00
Gregory Nutt
ded91e451b PTY: Add TERMIOS support. 2016-07-16 10:43:44 -06:00
Gregory Nutt
4b1553d3ad PTY: Fix some tricky issues. Now seems to be working. A lot more testing is needed 2016-07-15 14:29:32 -06:00
Gregory Nutt
f7f7036db8 Update some comments 2016-07-15 11:15:33 -06:00
Gregory Nutt
7fa5093fff PTYs prototypes hooked into build and configuration system (as EXPERIMENTAL) 2016-07-15 06:48:10 -06:00
Gregory Nutt
29a99bef0f serial/Kconfig: Oops put SERIAL_CONSOLE definition within if-endif condition. Better outside 2016-06-20 17:49:16 -06:00
Gregory Nutt
9434d3e945 There is now one-and-only-one copy of syslog_putc. It is in the SYSLOG channel logic and can redirect syslog output as needed. All former syslog_putc versions were renamed and the corresponding SYSLOG device initializaiton now calls syslog_channel() 2016-06-19 13:03:20 -06:00
Gregory Nutt
1cdc746726 Rename CONFIG_DEBUG to CONFIG_DEBUG_FEATURES 2016-06-11 14:14:08 -06:00
Gregory Nutt
9ec104834a Remove CONFIG_USARTn_ISUART 2016-05-25 11:21:48 -06:00
Gregory Nutt
c089a2f241 Rename CONFIG_ARCH_HAVE_OTHER_UART to CONFIG_OTHER_UART_SERIALDRIVER 2016-05-25 10:48:33 -06:00
Gregory Nutt
e2e6ce3f1b Rename CONFIG_ARCH_HAVE_SCIn to CONFIG_SCIn_SERIALDRIVER 2016-05-25 10:46:55 -06:00
Gregory Nutt
2a87741e72 Rename CONFIG_ARCH_HAVE_UARTn to CONFIG_UARTn_SERIALDRIVER 2016-05-25 10:45:01 -06:00
Gregory Nutt
249a2e48e5 Rename CONFIG_ARCH_HAVE_USARTn to CONFIG_USARTn_SERIALDRIVER 2016-05-25 10:39:23 -06:00
Max Neklyudov
d54a39832a Implement high level DMA infrastructure for serial devices 2015-11-12 14:16:19 -06:00
Anton D. Kachalov
1bb74504a8 Add support for custom platform IOCTL on UART 
Signed-off-by: Anton D. Kachalov <mouse@yandex-team.ru>
 2015-08-03 15:32:51 +03:00
Anton D. Kachalov
2fa6237b49 Revert THRNE-patch. The problem was in u16550_putc 
Regarding to:
https://github.com/tanzilli/ariag25-linux-2.6.39/blob/ariag25/drivers/tty/serial/8250.c#L1584
https://github.com/tanzilli/ariag25-linux-2.6.39/blob/ariag25/drivers/tty/serial/8250.c#L1913

When UART_LSR_THRE bit is set, then we ready to transmit more.

Current u16550_putc loops while UART_LSR_THRE bit is set. This logic have to be inverted.

Signed-off-by: Anton D. Kachalov <mouse@yandex-team.ru>
 2015-08-03 13:19:55 +03:00
Gregory Nutt
8935ff34d5 16550 UART Driver: Add a configuration option to indicate the the THR empty bit is inverted. This is the the case for the moxART SoC. Based comments from Anton D. Kachalov 2015-07-29 16:31:21 -06:00
Gregory Nutt
342f5fe33d Fix references to the no-longer-existent misc/ directory in comments, README files, and documentation 2015-06-28 08:08:57 -06:00
Gregory Nutt
5ee81c0d50 Serial: Allow serial console selection even if /dev/console is disabled: There can still be a serial console with no file system at all 2014-12-28 15:23:05 -06:00
Gregory Nutt
089578319a STM32 Serial: PX4 HW workarround for flaky STM32 RTS. From David Sidrane 2014-12-27 18:58:18 -06:00
Gregory Nutt
aefde565d3 Serial Upper Half: Add watermarks to RX flow control logic 2014-12-27 07:43:06 -06:00
Gregory Nutt
5d231b25f0 SAMA5D3 Xplained: Add an apps/examples/bridge configuration 2014-11-20 16:24:30 -06:00
Gregory Nutt
6c9f325e1e Move selection for CONFIG_SERIAL_TERMIOS out of MCU Kconfigs to common drivers/serial/Kconfig. Add CONFIG_ARCH_HAVE_SERIAL_TERMIOS to indicate if an MCU supports TERMIOS 2014-10-27 11:31:16 -06:00
Gregory Nutt
37e08c3b49 The olimex-efm32g880f128-stk now defaults to use LEUART1 as the serial console. Also fixes lots of compile bugs from the original LEUART checkin 2014-10-21 11:38:51 -06:00
Gregory Nutt
d13c9a08b9 EFM32: Add configuration support for LEUARTs 2014-10-21 09:37:02 -06:00
Gregory Nutt
3a1324741a More trailing whilespace removal 2014-04-13 14:32:20 -06:00
Gregory Nutt
cbdc9155ab SAMA5: Add support for DBGU. Xplained board now uses DBGU for the serial console 2014-04-01 11:24:15 -06:00
Gregory Nutt
113d5a2a81 Correct an error introduced in this file in very recent commits 2014-03-06 15:33:02 -06:00
Gregory Nutt
17a96f6e1e configs/us7032evb1/ostest: Configuration converted to use the kconfig-frontends tools 2014-03-06 09:17:11 -06:00
Gregory Nutt
968b2553cd Rearrange configuration settings so that ARCH_HAVE_SDIO is moved to higher, sharable level 2013-08-10 09:06:53 -06:00
Gregory Nutt
77e1c27005 Update SAMA5D3x-EK board configuration to support on-board UART connections, LEDs, and push buttons 2013-07-24 12:27:12 -06:00
Gregory Nutt
3edec35c51 Add flow control support to the STM32 serial driver; Fix some issues with UART2 and 5. From Lorenz Meier and Mike Smith 2013-06-06 14:49:14 -06:00
Gregory Nutt
420ca1b256 configs/freedom-kl25z: Change references to NuTiny to Freedom KL25Z 2013-04-25 20:09:15 -06:00
Gregory Nutt
b630e6a153 Useless TIOCSERGSTRUCT logic in most serial drivers is not compiled unless CONFIG_DEBUG and CONFIG_SERIAL_TIOCSERGSTRUCT are defined 2013-04-25 15:52:48 -06:00
patacongo
0bfa1b75e2 Add support for STM32 F427/437 chips. From Mike Smith 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5807 42af7a65-404d-4744-a932-0658087f49c3
 2013-04-01 13:43:31 +00:00
patacongo
ebf9960deb convert Kwikstik K40 configurations to use kconfig-frontends tools 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5784 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-25 17:33:41 +00:00
patacongo
cdbbfaa464 Fix readline return value; Add support for removable serial devices 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5589 42af7a65-404d-4744-a932-0658087f49c3
 2013-01-31 16:52:20 +00:00
patacongo
df9a72994f configs/xtrs/nsh and pashello now use kconfig-frontends and build Windows native 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5422 42af7a65-404d-4744-a932-0658087f49c3
 2012-12-09 17:34:53 +00:00
patacongo
620d1c9a33 configs/xtrs/ostest converted to kconfig-frontend and Windows native 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5421 42af7a65-404d-4744-a932-0658087f49c3
 2012-12-08 23:21:34 +00:00
patacongo
a93d7eb69e Shenzhou board is first to use ONLY Kconfig for configuration 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5114 42af7a65-404d-4744-a932-0658087f49c3
 2012-09-08 13:56:21 +00:00
patacongo
08ef9d0367 Add Kconfig settings for the LPC17xx 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5094 42af7a65-404d-4744-a932-0658087f49c3
 2012-09-05 17:20:19 +00:00
patacongo
e3f1d80ed6 Refactor serial configuratin; AVR teensy Kconfig now builds 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5092 42af7a65-404d-4744-a932-0658087f49c3
 2012-09-05 12:45:35 +00:00
patacongo
59588247bf Kconfig changes + back out part of last check-in: The 2STOP setting must be integer 0/1, not boolean 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5086 42af7a65-404d-4744-a932-0658087f49c3
 2012-09-04 15:28:56 +00:00
patacongo
e828b09381 Kconfig updates 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4606 42af7a65-404d-4744-a932-0658087f49c3
 2012-04-14 13:31:14 +00:00
patacongo
0830ef18dd Minor kconfig fixes 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4600 42af7a65-404d-4744-a932-0658087f49c3
 2012-04-13 15:04:05 +00:00
patacongo
1dc41e329b Kconfig update 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4599 42af7a65-404d-4744-a932-0658087f49c3
 2012-04-13 14:27:44 +00:00
patacongo
330b89ca0e Add kconfig documentation 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4567 42af7a65-404d-4744-a932-0658087f49c3
 2012-04-06 16:45:52 +00:00
patacongo
4b8c0c41c8 Adding skeleton Kconfig files (part 1 of 2) 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4564 42af7a65-404d-4744-a932-0658087f49c3
 2012-04-06 15:49:35 +00:00