This is a high resolution PWM driver, utilizing one 16-bit Flex-IO timer for
generating PWM period and the rest of the timers to generate PWM duty cycles.
This means that the period has to be the same for every PWM generated from one
FLEXIO block, but this way we can get 16-bit resolution for the PWM signals.
For a typical IMX9 HW there are 8 timers for each Flex-IO block, which means
that by using this driver one can get 7 PWM outputs from one block.
This driver can be later extended to have configuration options to use all
8 channels per flex-io by either using 8+8 -bit timer (less resolution) or by
using an external trigger from an LPIT.
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
Prior to this commit, doswitch is returned uninitialized if
(task_state == TSTATE_TASK_ASSIGNED || task_state == TSTATE_TASK_RUNNING)
&& no context switch occurs
&& (cpu == me).
Signed-off-by: Mingjie Shen <shen497@purdue.edu>
when declaring the target to be `nuttx`,create an empty allsyms source file for it;
when the target is declared as something else,the link behavior of the `nuttx` target is cloned
and added to actually generate the allsyms file.
finally use allsyms_nuttx to overwrite the already generated nuttx
and regenerate binary outputs
Signed-off-by: xuxin19 <xuxin19@xiaomi.com>
This patch uses "struct mm_map_entry_s" instead of the non-existing
"struct mm_map_entry" with minor revision on comments.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
This commit implements the common RMT driver (already available for
the other Espressif's xtensa-based devices) for ESP32.
This allows us to have a proper separation between the lower and
upper-half drivers and use the 'ws2812' example to drive WS2812 RGB
LEDs.
1.
In file included from chip/stm32_rtc.c:31:
chip/stm32_rtc.c: In function 'rtchw_set_alrmar':
chip/stm32_rtc.c:761:11: warning: format '%x' expects argument of type 'unsigned int',
but argument 3 has type 'uint32_t' {aka 'volatile long unsigned int'} [-Wformat=]
761 | rtcinfo(" ALRMAR: %08x\n", getreg32(STM32_RTC_ALRMAR));
| ^~~~~~~~~~~~~~~~~~
chip/stm32_rtc.c:761:25: note: format string is defined here
761 | rtcinfo(" ALRMAR: %08x\n", getreg32(STM32_RTC_ALRMAR));
| ~~~^
| |
| unsigned int
| %08lx
2.
arm-none-eabi-ld: staging/libdrivers.a(userled_lower.o): in function `userled_setled':
drivers/leds/userled_lower.c💯 undefined reference to `board_userled'
Regression:
stm32h7/linum-stm32h753bi: add support to leds
Signed-off-by: chao an <anchao@lixiang.com>
ERROR: pip's dependency resolver does not currently take into account all the packages that are installed. This behaviour is the source of the following dependency conflicts.
codechecker 6.23.1 requires PyYAML==6.0.1, but you have pyyaml 5.4.1 which is incompatible.
Signed-off-by: chao an <anchao@lixiang.com>
Summary:
- This commit applies the fix in https://github.com/apache/nuttx/pull/12025
Impact:
- None
Testing:
- Build only
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
This commit just rearranges the order of the types, data and
functions without modifying them. This is done to make it look more
similar with ESP32's ble adapter and ease maintanence.
Most of the functions used to set the peripherals are available for
all Espressif's chips. This commit uses this set of functions and
remove outdated functions that perform the same operations in a
chip level.
This commit updates the Wi-Fi and the BLE driver of ESP32. Most of
the changes rely on using the common sources and header files for
xtensa-based Espressif's SoCs.
The new Wi-Fi driver supports WPA3-SAE for both Station and SoftAP
mode. BLE's coexistence mode was enhanced according to the latest
libraries.
Please note that other sources required minor changes in order to
be compatible with the common sources.
Whenever a SPI flash operation will take place, it's necessary to
disable the cache and run no code from the flash. This includes
pausing the other CPU (when `CONFIG_SMP=y`). This commit prevents
an error to occur when the CPU core is evaluated before the task
is increased to the max priority.
Whenever a SPI flash operation will take place, it's necessary to
disable the cache and run no code from the flash. This includes
pausing the other CPU (when `CONFIG_SMP=y`). This commit prevents
an error to occur when the CPU core is evaluated before the task
is increased to the max priority.
Fix default_value of ioctl(VIDIOC_QUERYCTRL)(id=V4L2_CID_3A_STATUS)
to AE operating and AWB operating, because both AE and AWB are
automatical adjustment mode by default.
