sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
32,392 Commits 1 Branch 0 Tags 291 MiB
1f4a1eab6d
Commit Graph

32392 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
Juha Niskanen
1f4a1eab6d libs/libc/netdb: Add getaddrinfo() and friends. 2018-06-08 07:07:21 -06:00
Juha Niskanen
5c8a975d79 libs/libc/net: Add inet_aton() 2018-06-08 07:06:27 -06:00
Gregory Nutt
a94e3284b3 syslog: Enable is partial, crippled version of syslog_flush(); arch/: Call syslog_flush() from assertion handling logic. 2018-06-07 16:29:16 -06:00
Gregory Nutt
2d50a2833e configs/sabre-6quad: Update README/refresh a configuration. 2018-06-07 16:29:16 -06:00
Gregory Nutt
2e6fc4e73d Update TODO list 2018-06-06 23:27:36 -06:00
Gregory Nutt
8aa486515e arch/: Correct critical section logic associated with the recent signal handler changes (yet again). 2018-06-06 17:39:10 -06:00
Gregory Nutt
b5c6d9c849 Update some comments. 2018-06-06 17:20:01 -06:00
Gregory Nutt
a581d7c2e3 arch/: Relasted to last big change to force interrupts to be disabled. In the SMP case, we still must call leave_critical_section() at least once in order to compensate for the fact that the irqcount was incremented in up_schedsigaction(). 2018-06-06 17:04:12 -06:00
Marco Krahl
5b96a26c1b Merged in MarcoKrahl/nuttx (pull request #653) 
Fixes compiler errors when using LTDC and DMA2D

* stm32: ltdc and dma2d are are depends on FB_OVERLAY support

    Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>

* stm32_dma2d.h: Makes interface available when FB_OVERLAY is enabled

    Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>

* stm32_ltdc: Fixes compiler error when blit support is disabled

    Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>

* stm32f429i-disco: Updates lvgl board example

    Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>

* stm32f429i-disco: Updates nxwm board example

    Still nxwm_main is missing.

    Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2018-06-06 21:17:57 +00:00
Gregory Nutt
6c1ea7983a Eliminate a 'Declaration isnt a prototype' warning. 2018-06-06 14:33:19 -06:00
Gregory Nutt
c2755517a9 arch/arm/src/smt32: Kconfig: Select CONFIG_FB_OVERLAY if DMA2D is enabled. Fix some compile issues in stm32_ltdc.c when CONFIG_FB_OVERLAY_BLIT is not enabled. 2018-06-06 13:07:20 -06:00
Gregory Nutt
6230ab01b6 arch/arm/include/armv7-m: Last change requires inclusion of chip.h for definition. 2018-06-06 10:38:51 -06:00
Marco Krahl
af9bf8d721 Merged in MarcoKrahl/nuttx/ltdc (pull request #652) 
ports stm32 ltdc and stm32 dma2d to framebuffer interface

* stm32: Removes current dma2d and ltdc implementation for replacement

    Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>

* stm32f429i-disco: Removes obsolete functions call

    Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>

* stm32_dma2d: Adds pixel format and transparency definitions

    Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>

* stm32_dma2d: Adds interface definition

    Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>

* stm32_dma2d: Reimplements dma2d driver

    Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>

* stm32_ltdc: Adds interface definition

    Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>

* stm32_ltdc: Reimplements ltdc driver

    Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>

* stm32: Updates LTDC and DMA2D Kconfig definitions

    Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>

* stm32f429i-disco: Fix compile error when ldc debug is enabled

    Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>

* stm32f429i-disco: Adds helper script for frambuffer and heap2 calculation

    Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>

* stm32f429i-disco: Update README for framebuffer configuration

    Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>

* stm32f429i-disco: Update board configuration of framebuffer example

    Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2018-06-06 16:05:05 +00:00
Gregory Nutt
977d41d519 Based on a change recommended by Mark Shulte: 
Signal handlers maybe run with interrupts enabled or disabled, depending on how the task the received the signal was blocked. (i.e.: If sem_wait() is called, then we disable interrupts, then block the currently running task). This could be dangerous, because user code would be running with interrupts disabled.

This change forces interrupts to be enabled in up_sigdeliver() before executing the signal handler calling up_irq_enable() explicitly.  This is safe because, when we return to normal execution, interrupts will be restored to their previous state when the signal handler returns.
 2018-06-06 09:54:30 -06:00
Gregory Nutt
9222f50e1c arch/: Make sure the up_irq_enable() is available on all architectures. I will not be able to test all of these new versions of this function so this may break things for awhile. 2018-06-06 09:25:40 -06:00
Gregory Nutt
f88a4c6ea8 arch/risc-v/src: Make code follow pattern of other architectures better. Fix some coding standard issues. 2018-06-06 07:46:50 -06:00
Mateusz Szafoni
a002238898 Merged in raiden00/nuttx (pull request #651) 
stm32f334-disco/buckboost: use a PID controller from libdsp

* libdsp: initial commit

* libdsp: cosmetics

* stm32f334-disco/buckboost: use a PID controller from libdsp

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2018-06-06 12:47:37 +00:00
Juha Niskanen
e0aa6ed48c arch/arm/src: Change ASSERT macros to DEBUGASSERT. 2018-06-06 06:34:14 -06:00
Gregory Nutt
88cf9f1d3f arch/arm/src/stm32/stm32f10xxf30xx_flash.c: Trivial simplification. 2018-06-05 13:21:52 -06:00
Gregory Nutt
6fd4caf00f Implemente support for STM32 F1 banked FLASH 
Squashed commit of the following:

    arch/arm/src/stm32/stm32f10xxf30xx_flash.c:  Re-implemented Dmitriy Linikov's change to support multi-banked FLASH on the STM32 F1 parts AFTER separating the FLASH support by architecture and implementing more standard base+offset register addressing.  Now the change goes in rather cleanly.
    arch/arm/src/stm32/stm32f10xxf30xx_flash.c:  Use base + offset address to simplify implementation of dual bank flash.
 2018-06-05 12:50:55 -06:00
Masayuki Ishikawa
fb07bd7e27 Adds loopback test for digital MIC on lc823450 via i2schar driver. 
Squashed commit of:

  configs/lc823450-xgevk: Enable DMDIN0 (Digital MIC)
  I2S: Add ioctl interface to i2s_ops_s and i2schar driver
  arch/arm/src/lc823450: Add DGMIC in lc823450_i2s.c
  configs/lc823450-xgevk: Add i2schar driver to lc823450_wm8776.c
  configs/lc824350-xgevk: Enable AUDIO_I2SCHAR in audio/defconfig
  configs/lc823450-xgevk: Update README.txt
 2018-06-05 10:34:22 -06:00
Gregory Nutt
1f2e7f4b52 arch/arm/src/stm32: CONFIG_STM32_FLASH_WORKAROUND_DATA_CACHE_CORRUPTION_ON_RWW option applies only to F2 and F4. 2018-06-05 10:20:50 -06:00
Gregory Nutt
1a03201600 STM32 FLASH logic has reached a limit in complexity and, hence, needs to be divided into multiple C files of lower complexity. 
Squashed commit of the following:

    arch/arm/src/stm32/stm32f10xxf30xx_flash.c:  Be consistent in file naming.
    arch/arm/src/stm32l10xxf30xxx_flash.c:  Separate STM32F10xx and STM32F30xx FLASH logic into a separate file.
    arch/arm/src/stm32l20xx40xxx_flash.c:  Separate STM32F20xx and STM32F40xxFLASH logic into a separate file.
    arch/arm/src/stm32l15xx_flash.c:  Separate STM32L15xx FLASH logic into a separate file.
 2018-06-05 09:46:18 -06:00
Dmitriy Linikov
6cb4854503 arch/arm/src/stm32/chip/stm32_flash.h: Add register definitions for F1 parts that have dual banked FLASH. 2018-06-05 08:49:17 -06:00
Dmitriy Linikov
a7b2d7104a arch/arm/src/stm32: Added progmem interface support for STM32F20XX 2018-06-05 07:36:49 -06:00
Gregory Nutt
5c060f76eb Correct some errors in the ReleaseNotes. Noted by Alan Carvalho de Assis. 2018-06-04 07:05:42 -06:00
Gregory Nutt
63efcbf720 tools/kconfig2html.c: Due to new usage, tool needs to be able to handle configuration files with names other than Kconfig. 2018-06-03 17:15:31 -06:00
Gregory Nutt
ae44eb2969 tools/kconfig2html.c and wireless/bluetooth/Kconfig: Fixes needed to generate new configuration variable document. 2018-06-03 10:03:35 -06:00
Gregory Nutt
b020ee13b8 Remove excute bit from permissions on two .h files. 2018-06-03 09:36:01 -06:00
Gregory Nutt
0eb9a05b9e Update Documentation/NuttX.html in preparation for the NuttX-7.25 release. 2018-06-03 08:32:47 -06:00
Gregory Nutt
20f15435a2 Update ReleaseNotes in preparation for the 7.26 release. 2018-06-02 16:21:08 -06:00
Gregory Nutt
5d09568a38 Update ChangeLog in preparation for the 7.26 release. 2018-06-02 11:05:54 -06:00
Gregory Nutt
d72096df55 configs: Fix several warnings from bad configurations, mostly STM32F4 Discovery, that have OTGFS eanbled, but not USB support. 2018-06-02 07:01:55 -06:00
Alan Carvalho de Assis
ecf3bccf09 configs/stm32f4discovery: Add a module configuration for testing the kernel module example with the STM32F4Discovery board. 2018-06-02 06:44:20 -06:00
Alan Carvalho de Assis
c31472e836 configs/xmc4500-relax/src: Call xmc4_spidev_initialize() in xmc4_boot.c. 2018-06-02 06:44:20 -06:00
Gregory Nutt
bcf9c2e4aa Update README 2018-06-01 19:44:02 -06:00
Gregory Nutt
aeb476bfaf Update README 2018-06-01 17:38:38 -06:00
Gregory Nutt
8c8778cc44 configs/olimex-stm32-p407: Add the module configuration. 2018-06-01 15:56:13 -06:00
Gregory Nutt
545627ce85 tools/sethost.sh: Fix some errors in last change; add support for macOS 2018-06-01 14:21:04 -06:00
Gregory Nutt
d52c63f632 Change all references from OSX to macOS 2018-06-01 13:25:50 -06:00
Gregory Nutt
d83355357e samv71-xult: Refersh module configuration. samv71-xult and imxrt1050-evk: Two more places where libc references in old position. Should be libs/libc. 2018-06-01 11:21:19 -06:00
Gregory Nutt
a6a88198c0 sched/modules: Be consistent use of binary loader debug instrumentation. Was mixed system and binary loader debug. libs/libc/modlib: Switch from systemb to binary load debug to be consistent with sched/modules. 2018-06-01 10:10:17 -06:00
Gregory Nutt
12de93dd36 libs/libc/modlib/modlib_verify.c: Fix backward test for an error. 2018-06-01 09:21:47 -06:00
Alan Carvalho de Assis
f3d940aac5 sched/module/mod_modhandle.c: Fix typo in debug statement. 2018-06-01 08:54:37 -06:00
Alan Carvalho de Assis
0923643d99 configs: Fix all boards with module support to use nuttx/libs/libc/modlib/gnu-elf.ld instead of nuttx/libc/modlib/gnu-elf.ld. 2018-06-01 08:00:59 -06:00
Alan Carvalho de Assis
93c9d323e0 configs/stm32f4discovery: Add Load Modules flags to STM32F4Discovery board 2018-06-01 07:58:16 -06:00
Gregory Nutt
6a55b471da Trivial README update 2018-05-31 16:46:04 -06:00
Gregory Nutt
a5e4508a95 Makefile: The clean_context target needs to invoke a corresponding clean_context target in the apps/Makefile in order to remove linkages 2018-05-31 14:46:28 -06:00
Gregory Nutt
de119e8589 Various fixes necessary to build the simulator under MSYS. 2018-05-31 13:25:04 -06:00
Gregory Nutt
3146eb5d63 tools/: Update to better support MSYS 2018-05-31 11:53:09 -06:00