An off-by-one error caused invalid memory to be accessed when the
last port was used. The first entry, at index 0, was never used.
The USB standard uses 1-based numbering for hub ports. This number
was used to index an array. This change converts the port number to
a zero-based port index when the array is accessed. The zero-based
value in the port field of the usbhost_hubport_s structure is also
converted before printing.
For testing, this bug was exposed on a 4 port hub when port 4 was
used after changing USBHUB_MAX_PORTS to 4 in hub.h. The bug should
also be triggered without changing hub.h if a 7 port hub is
available.
Considering that the future fb needs to achieve dynamic resolution, the address and size of fbmem will be redistributed on the bottom driver side, so remove fbmem, fblen, and bpp cached in fb_chardev_s, and change it to call getplaneinfo every time to re-acquire panel info from the bottom driver. Avoid cache coherency problems.
Signed-off-by: pengyiqiang <pengyiqiang@xiaomi.com>
Signed-off-by: jianglianfang <jianglianfang@xiaomi.com>
Devices connected to the same USB bus should have unique function addresses.
This was not true for root hubs with multiple ports. After this change,
enumeration is more reliable on the sama5d3-xplained board when both root hub
ports are used.
This change amounts to using one usbhost_devaddr_s object per root hub
instead of one per root hub port. For the majority of boards only one
root hub port is available so no change in behavior should be expected.
At present, the serial drivers qemu_serial.c and serial_pl011.c on the fvp-v8r and qemu platforms in arm64 are duplicated
and need to be merged. The plan is to place them under the drivers\serial directory to create a common code module,
so that both fvp-v8r and qemu can use the same code.
In the future, if new platforms use pl011 serial ports, they can also be directly reused
Signed-off-by: hujun5 <hujun5@xiaomi.com>
warning: The int symbol SYSLOG_RPMSG_WORK_DELAY (defined at drivers/syslog/Kconfig:274) is being evaluated in a logical context somewhere. It will always evaluate to n.
make: *** [tools/Unix.mk:663: olddefconfig] Error 1
Signed-off-by: chao an <anchao@xiaomi.com>
follow how Linux report the correction information from ecc:
http://www.infradead.org/pipermail/linux-mtd/2012-March/040305.html
since this information is very useful to file system(e.g. yaffs, ubi/buifs)
which is specially designed for nand flash.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Since not all nand devices follow ONFI spec, nand_raw_initialize could be used to skip ONFI special action
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Current driver supports MTDIOC_BULKERASE ioctl that erases the entire
device. The added ioctl MTDIOC_ERASESECTORS adds possibility to erase
just sectors defined by the user.
This is similar to MEMERASE call in Linux kernel.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
Summary:
- I noticed that mtu info with ifconfig shows incorrect size.
- This commit fixes this issue.
Impact:
- None
Testing:
- Tested with spresense:wifi_smp
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Similar to the fix introduced by
4d6a8663fa, it's necessary to set
one end of the file_pipe as non-blocking temporarily while opening
the other end to avoid it blocking unexpectedily.
The spawn proxy thread is a special existence in NuttX, usually some developers
spend a lot of time on stack overflow of spawn proxy thread:
https://github.com/apache/nuttx/issues/9046https://github.com/apache/nuttx/pull/9081
In order to avoid similar issues, this PR will remove spawn proxy thread to simplify
the process of task/posix_spawn().
1. Postpone the related processing of spawn file actions until after task_init()
2. Delete the temporary thread of spawn proxy and related global variables
Signed-off-by: chao an <anchao@xiaomi.com>
Add private data for spi_bitbang low-level driver to add an instance
specific private data.
And add spi_destroy_bitbang() to clean up a driver instance.
When executing up_fbinitialize, the driver may turn on the vsync interrupt. If the vsync interrupt calls fb_pollnotify before executing fb->vtable->priv = fb it will cause null pointer access and crash.
Signed-off-by: pengyiqiang <pengyiqiang@xiaomi.com>
- Fix DMA addressing issues within litex_sendsetup/litex_recvsetup
- Extend with handling specific to eMMC commands during init & use.
- Cleanup of 4-bit BUS handling for SD and eMMC
- For eMMC, Send CMD0 during init as per JEDEC v4.41 for pre-idle
WIP
WIP - ALS now OK with full IOCTL.
WIP
WIP
ALS now works as intended
WIP - getting to bottom of crash when ctrl-c the app
Seems to all work...
ioctl #define changes
Update ioctl.h
Maybe final changes
Maybe final changes - again
Delete .settings directory
Delete nuttx Default.launch
Maybe final changes - again
changes after initial feedback
changes after initial feedback
Add snerr error when incorrect device ID seen
Update apds9922.c
Revert "Merge branch 'apds9922' of https://github.com/TimJTi/nuttx into apds9922"
This reverts commit 8fdf5cbfb783d25251d13bc338ece6adca1308bc, reversing
changes made to 0d58237ba27f3cf87cf711658f5388d974be502e.
Improve probe error messages
APDS9922
WIP
WIP - ALS now OK with full IOCTL.
WIP
WIP
ALS now works as intended
WIP - getting to bottom of crash when ctrl-c the app
Seems to all work...
ioctl #define changes
Update ioctl.h
Maybe final changes
Maybe final changes - again
Delete .settings directory
Delete nuttx Default.launch
Maybe final changes - again
changes after initial feedback
changes after initial feedback
Add snerr error when incorrect device ID seen
Update apds9922.c
Revert "Merge branch 'apds9922' of https://github.com/TimJTi/nuttx into apds9922"
This reverts commit 8fdf5cbfb783d25251d13bc338ece6adca1308bc, reversing
changes made to 0d58237ba27f3cf87cf711658f5388d974be502e.
Improve probe error messages
Update drivers/sensors/apds9922.c
Co-authored-by: Petro Karashchenko <petro.karashchenko@gmail.com>
Update drivers/sensors/apds9922.c
Co-authored-by: Petro Karashchenko <petro.karashchenko@gmail.com>
Update drivers/sensors/apds9922.c
Co-authored-by: Petro Karashchenko <petro.karashchenko@gmail.com>
Update drivers/sensors/apds9922.c
Co-authored-by: Petro Karashchenko <petro.karashchenko@gmail.com>
Update drivers/sensors/apds9922.c
Co-authored-by: Petro Karashchenko <petro.karashchenko@gmail.com>
Update drivers/sensors/apds9922.c
Co-authored-by: Petro Karashchenko <petro.karashchenko@gmail.com>
Update drivers/sensors/apds9922.c
Co-authored-by: Petro Karashchenko <petro.karashchenko@gmail.com>
Update drivers/sensors/apds9922.c
Co-authored-by: Petro Karashchenko <petro.karashchenko@gmail.com>
Update drivers/sensors/apds9922.c
Co-authored-by: Petro Karashchenko <petro.karashchenko@gmail.com>
Update drivers/sensors/apds9922.c
Co-authored-by: Petro Karashchenko <petro.karashchenko@gmail.com>
Update drivers/sensors/apds9922.c
Co-authored-by: Petro Karashchenko <petro.karashchenko@gmail.com>
Update drivers/sensors/apds9922.c
Co-authored-by: Petro Karashchenko <petro.karashchenko@gmail.com>
Update drivers/sensors/apds9922.c
Co-authored-by: Petro Karashchenko <petro.karashchenko@gmail.com>
Update drivers/sensors/apds9922.c
Co-authored-by: Petro Karashchenko <petro.karashchenko@gmail.com>
Delete .gitignore
Changes after PR review
Remove static arrays from header file
Update apds9922.c
improvements to enum usage
Restore .gitignore
Update Kconfig
Update .gitignore
Update .gitignore
