sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
49,135 Commits 1 Branch 0 Tags 291 MiB
28361a295d
Commit Graph

124 Commits

Author SHA1 Message Date
Michal Lenc
7d877fbbc3 imxrt: add support for PWM synchronization 
This commit allows the PWM modules to be synchronized by an external
signal (other PWM module for example). The sync source can be selected
from configuration.

PWM module can also now generate a trigger when its timer reaches the duty
cycle. This trigger is used for the synchronization of other modules. It
can also be used for triggering ADC for example in the future.

Thanks to Rastislav Pavlanin and  Jan Spurek from NXP support for
suggestion which helped to solve the inter-module PWM synchronization
task.

Signed-off-by: Michal Lenc <michallenc@seznam.cz>
 2022-09-15 08:10:26 +09:00
curuvar
46103e29c0 Add "telnet" configuration to Raspberry Pi Pico W 2022-09-10 10:30:59 +08:00
curuvar
89d3ba44ca Fixes to RP2040 SMART flash and documentation 2022-09-06 13:13:00 +08:00
curuvar
74f1bfbfd7 Added support for Raspberry Pi Pico W 2022-08-17 19:03:19 -03:00
Tiago Medicci Serrano
df0604a4be Added default config for lvgl configs based on both fb and lcddev. 
In order to better test the lcdddev driver and framebuffer, newer
board configs (for the TTGO T-Display and for the simulator) were
added.

Adjusted references of the sim:lvgl_(fb/lcd) config.
 2022-08-13 20:36:45 +08:00
Jari van Ewijk
195412fa46 S32K1 & S32K3: add basic documentation for MCU family and boards 2022-08-02 14:53:09 -04:00
curuvar
c21c7ac8dc Added Adafruit QT Py RP2040 board. 
Added ability to configure indivdual UART, SPI and I2C pin location.
 2022-07-23 18:25:38 +08:00
Gustavo Henrique Nihei
feca57ffa9 esp32-devkitc: Add knsh configuration to the Documentation page 
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
 2022-07-14 14:57:57 +08:00
curuvar
b70fc57849 RP2040 Board Documentation 2022-07-02 11:22:52 +08:00
Nathan Hartman
2032eeae6c Documentation: Fix various typos. 
Documentation/components/drivers/character/serial.rst
Documentation/faq/index.rst
Documentation/guides/pysimcoder.rst
Documentation/platforms/arm/imxrt/boards/teensy-4.x/index.rst
Documentation/platforms/arm/imxrt/index.rst
Documentation/platforms/arm/stm32wl5/boards/nucleo-wl55jc/index.rst
Documentation/platforms/arm/stm32wl5/index.rst
Documentation/platforms/risc-v/bl602/index.rst
Documentation/platforms/sim/sim/index.rst
Documentation/platforms/xtensa/esp32/index.rst

Co-authored-by: Gustavo Henrique Nihei <38959758+gustavonihei@users.noreply.github.com>
 2022-06-24 00:01:38 +08:00
Alan Carvalho de Assis
e87a20e648 Add documentation to ESP32-S3 boards 2022-06-17 17:14:10 -03:00
Michał Łyszczek
5490f8964f stm32wl5: add support for internal FLASH 
This patch adds corrected implementation of FLASH memory to be used
with progmem driver for use with mtd filesystems like nxffs or smartfs.

Signed-off-by: Michał Łyszczek <michal.lyszczek@bofc.pl>
 2022-06-15 20:29:17 +08:00
Michał Łyszczek
4e5d8aca3d nucleo-wl55jc: add buttons and gpio interrupt support 
This patch adds to the nucleo-wl55jc previously implemented EXTI support.
Button support with nuttx's button driver is added.

I've written small example to show how to use GPIO EXTI. B3 button can be
used (selectable via Kconfig) to toggle Red LED.

I've added new defconfig for demo purposes. I've included there config
and enabled example programs that are meant to demonstrate functions of
the board and does not really have a place in real world project. Like
Red LED can be toggled with B3 button, or LED example that flashes LEDS,
or button example to show which button has been pressed.

Signed-off-by: Michał Łyszczek <michal.lyszczek@bofc.pl>

--
v1 -> v2:
Suggested by: Petro Karashchenko
- Change (1 << 0) to (1 << BUTTON1_BIT (and similar)

v2 -> v3:
- Fix invalid BUTTON3_BIT value

v3 -> v4:
Suggested by: Petro Karashchenko
- Change 0/1 to false/true
 2022-06-13 20:21:20 +08:00
Michał Łyszczek
288b57d5ca stm32wl5: add EXTI support for GPIO 
This patch implements working support for EXTI GPIO.

Signed-off-by: Michał Łyszczek <michal.lyszczek@bofc.pl>

--
v1 -> v2:
Suggested by: Petro Karashchenko
- change (1 << n) to (1 << (n)) in macro definition
- change 1 << X to (1 << X) in code
- fix alignment

v2 -> v3:
Suggested by: Petro Karashchenko
- I was supposed to change (1 << pin) to 1 << pin, not the other way around:)
 2022-06-13 20:21:20 +08:00
Michał Łyszczek
114758e518 add docs for stm32wl5 chip and nucleo-wl55jc board 
This patch adds documentation for both stm32wl5 chip family and
nucleo-wl55jc board. I've kept the same directory structure for
arm/stm32 as in arch/ and boards/ directories.

Signed-off-by: Michał Łyszczek <michal.lyszczek@bofc.pl>
 2022-06-08 08:09:50 +09:00
Michał Łyszczek
a5bcb2dc46 Documentation: fix multiple errors and warnings 
Multiple files were badly formatted, which resulted in many
warnings. This made it harder to check for errors in newly
written documentation.

What's worse, badly formatted text resulted in butchered
output in generated html.

This patch fixes most of the errors, but alas, not all of
the errors can be fixed. Anyway, this should be way easier
to spot errors in newly written docs now.

Signed-off-by: Michał Łyszczek <michal.lyszczek@bofc.pl>
 2022-06-08 03:02:32 +08:00
YAMAMOTO Takashi
045f8753e2 Documentation: esp32-devkitc: Improve html rendering 2022-05-27 11:04:59 +03:00
YAMAMOTO Takashi
5d03e1a3b4 esp32-devkitc: Document wamr_wasi_debug config 2022-05-25 14:47:16 +08:00
Alan C. Assis
0f49a8dec7 Fix ESP32-C3 toolchain download link 2022-04-02 05:41:18 +08:00
Janne Rosberg
841bcf84a0 docs/mpfs: mark USB and ethernet as supported 2022-03-18 17:22:27 +02:00
YAMAMOTO Takashi
26a08908cf boards/esp32-devkitc/index.rst: Mention efuse config 2022-03-17 13:40:51 +08:00
Xiang Xiao
1d1bdd85a3 Remove the double blank line from source files 
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2022-02-20 20:10:14 +01:00
Alan C. Assis
9739be15de Doc/sim: Add documentation about LVGL and VNC 2022-02-19 17:30:27 +08:00
Eero Nurkkala
10d98f64d3 Documentation: risc-v/mpfs: update documentation 
Update the risc-v/mpfs documentation to match the current work.

Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
 2022-01-17 17:33:03 +08:00
Alan C. Assis
7b1135500b doc/esp32: Add documentation about BLE for ESP32 2021-12-28 07:31:02 -06:00
Jari van Ewijk
2e47ef32cf GPIO driver: register all pintypes as generic /dev/gpioN 2021-12-09 23:55:12 -06:00
Abdelatif Guettouche
490ac188c2 Documentation/esp32: Remove the open issues section. 
1. Issues regarding caching:  The ESP32 has no D-Cache and thus the
   issues described there do not apply.
2. Issue regarding assertion: No chip does this at the moment.

Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-12-06 07:15:58 -06:00
Abdelatif Guettouche
00befc4ec6 Documentation/esp32c3: Document the CDC console defconfig. 
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-11-09 09:22:57 -03:00
Abdelatif Guettouche
dee1726a35 Documentation/esp32c3: List the supported ESP32-C3 boards. 
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-11-08 14:58:54 -03:00
Gustavo Henrique Nihei
a1af605973 espressif: Fix references to Wi-Fi according to Wi-Fi Alliance 
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
 2021-10-25 08:01:44 -05:00
Gustavo Henrique Nihei
b99852872c Documentation: Update "Using QEMU" section for ESP32 
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
 2021-10-19 23:23:43 +02:00
Alan C. Assis
e0389ce1fb build: Replace 'make download' with 'make flash' 2021-10-14 16:33:27 -03:00
Janne Rosberg
3a6d2adce8 Documentation/mpfs: add SD to supported peripherals 2021-09-18 12:18:09 -03:00
Alan C. Assis
edb52cc32c Doc: Add initial documentation to the simulator 2021-09-06 10:34:57 +08:00
Alan C. Assis
adea1fdeb4 Add wifinsh documentation and fix missing "nsh> " in the doc 2021-08-31 15:04:07 -03:00
Alan C. Assis
de64a1eee8 doc/esp32: Add instructions to use softap 
Co-author: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-08-26 20:57:19 +02:00
Abdelatif Guettouche
6c2fcdc45d Documentation: Update ESP32-C3 supported peripheral list. 
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-08-21 18:30:53 -03:00
Abdelatif Guettouche
11ed9199c1 Documentation/esp32-wrover-kit: update the name of the GPIO interrupt 
device.

Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-08-19 19:18:23 -07:00
Alan C. Assis
1023918d37 Doc/esp32: Fix wapi psk command, value 1 is for WEP 2021-08-11 20:04:48 -07:00
jsun
bb63afde1e Documentation/bl602: Update some imformation; Add partition.toml in tool/bl602 2021-07-27 21:01:15 -07:00
Abdelatif Guettouche
58a5e0744b Documentation/esp32: Remove the rest of the OpenOCD text. 
This information there is outdated and some of its content should be in
the board documentation and not the chip.

Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-07-26 18:17:53 -03:00
Abdelatif Guettouche
18dd3973f0 Documentation/esp32: Combine some duplicate information was provided in two 
separate sections.

Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-07-26 18:17:53 -03:00
Abdelatif Guettouche
96d093a545 Documentation/esp32: The linker scripts now is generated to decided 
wether to run from IRAM or Flash based on Kconfig options.

Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-07-26 18:17:53 -03:00
Abdelatif Guettouche
28b1e35a33 Documentation/esp32: WDT reboot from the 2nd stage bootloader is now 
handled by NuttX startup code, so remove any mentions to that.

Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-07-26 18:17:53 -03:00
Abdelatif Guettouche
d4483ac808 Documentation/esp32: Use the latest tag when building the toolchain. 
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-07-26 18:17:53 -03:00
jsun
e968240855 Add BL602 documentation 2021-07-19 08:40:44 -03:00
Michal Lenc
cafcb0508f Documentation/platforms/arm/imxrt: added information regarding tickless mode support 
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
 2021-07-13 09:55:29 -03:00
Michal Lenc
b88b5b14c8 Documentation/platforms/arm/imxrt: update documentation with FlexPWM support 
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
 2021-06-26 09:58:52 -05:00
Michal Lenc
0851036ae3 boards/arm/imxrt/teensy-4.x: added support for encoder 
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
 2021-06-16 21:22:03 -05:00
Eero Nurkkala
1bce864ef7 mpfs: add i2c driver 
This adds mpfs i2c driver.

Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
 2021-06-11 21:03:42 -05:00
Eero Nurkkala
fad34e04c4 mpfs: add spi driver 
This adds the SPI driver for the MPFS Icicle board.

Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
 2021-06-11 09:10:03 -05:00
Janne Rosberg
39274937e4 documentation/mpfs: add mpfs and icile board to documentation 2021-05-24 22:55:44 -05:00
Michal Lenc
d6227623b7 Documentation/platforms: fix docs style and add photo for imxrt1060-evk board 
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
 2021-05-12 11:47:32 -03:00
Michal Lenc
1856a85b28 Documentation/platforms: added documentation for imxrt10xx boards 2021-05-12 11:47:32 -03:00
Abdelatif Guettouche
77bb231827 Documentation/esp32c3-devkit: Fix the name of the ESP32-C3 DevkitM 
image.
 2021-05-12 10:16:05 -03:00
Abdelatif Guettouche
42232fa98e Documentation/esp32c3: Fix the OpenOCD board. 
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-05-12 10:16:05 -03:00
Abdelatif Guettouche
5bd970df4f Documentation/esp32c3: Explain debugging with OpenOCD. 
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-05-12 04:40:41 -07:00
Abdelatif Guettouche
df7bd125f8 boards/risc-v/esp32c3: Convert the README.txt to the new Documentation. 
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-05-12 04:40:41 -07:00
Alan C. Assis
0a0a034a3f esp32: replace EPS32 typo with ESP32 2021-04-29 18:03:05 -03:00
Nathan Hartman
26f09cec6d Documentation: Fix a few typos. 
* Documentation/contributing/documentation.rst
    * Documentation/guides/tasktraceuser.rst
    * Documentation/guides/drivers.rst
    * Documentation/quickstart/running.rst
    * Documentation/quickstart/compiling.rst
    * Documentation/components/drivers/character/watchdog.rst
    * Documentation/components/drivers/character/foc.rst
    * Documentation/components/nxgraphics/nxtk.rst
    * Documentation/applications/nsh/login.rst
    * Documentation/introduction/detailed_support.rst
    * Documentation/introduction/resources.rst
    * Documentation/reference/user/01_task_control.rst
    * Documentation/reference/os/wqueue.rst

      Fix some misspelled words.

      Many of these were caught by codespell.
 2021-04-28 17:00:23 -03:00
Nathan Hartman
4a75b41b4d Documentation: Minor fixes 
Documentation/guides/drivers.rst:

    * Replace wrong "Ethernet" with "SD Card"

Documentation/platforms/arm/imxrt/index.rst:

    * Fix misspelled "Supported"

Documentation/platforms/xtensa/esp32/index.rst:

    * Fix doubled "also"
    * Fix "the" -> "to"

Documentation/reference/os/index.rst:

    * Fix doubled "also"
    * Fix "also" -> "are"
 2021-04-20 21:31:18 -05:00
Masayuki Ishikawa
1a9e7efde5 smp: Remove CONFIG_SMP_IDLETHREAD_STACKSIZE 
Summary:
- The CONFIG_SMP_IDLETHREAD_STACKSIZE was introduced to optimize
  the idle stack size for other than CPU0
- However, there are no big differences between the idle stacks.
- This commit removes the config to simplify the kernel code

Impact:
- All SMP configurations

Testing:
- Tested with ostest with the following configs
- spresense:smp, spresense:rndis_smp
- esp32-devkitc:smp (QEMU), maix-bit:smp (QEMU)
- sabre-6quad:smp (QEMU), sabre-6quad:netnsh_smp (QEMU)
- raspberrypi-pico:smp, sim:smp (x86_64)

Signed-off-by: Masayuki Ishikawa <asayuki.Ishikawa@jp.sony.com>
 2021-04-19 21:46:39 -05:00
YAMAMOTO Takashi
d1307aa34f esp32-devkitc: Add a config to run apps/examples/sotest 2021-04-15 12:18:52 +01:00
YAMAMOTO Takashi
c62173375d esp32-devkitc: Add a config to run apps/examples/module 
Right now, these seems to be no config in tree with
CONFIG_ARCH_USE_MODULE_TEXT.
 2021-04-15 12:18:52 +01:00
Gustavo Henrique Nihei
23775da531 Documentation: Add ESP-WROVER-KIT documentation with NX and LVGL configs 2021-04-14 16:29:32 -03:00
Michal Lenc
0719976722 Documentation: added documentation for i.MX RT series and Teensy 4.x board 
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
 2021-04-13 13:18:47 -05:00
Abdelatif Guettouche
7fb6a92e35 Documentation/esp32: Add unsupported peripherals. 
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-04-08 20:02:56 -03:00
Abdelatif Guettouche
183735336d Documentation/esp32: Add supported peripherals. 
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-04-08 20:02:56 -03:00
Abdelatif Guettouche
4f9b280987 Documentation/esp32: Fix a couple of typos and add some notes. 
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-04-08 20:02:56 -03:00
Matias N
bc8a6772f6 Documentation: migrate ESP32DevKit README into docs 2021-04-07 22:34:33 +01:00
Abdelatif Guettouche
c7c4f0b44c Documentation: Describe how the use the MQTT-C config and the expected 
output.

Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-03-31 10:01:08 -05:00
Matias N
653bbdedec Documentation: add ESP32 and DevKitC docs 2021-03-25 19:44:24 -07:00
Matias N
f63c189a17 Documentation: document nRF52832 Sparkfun board (improve MDK board a bit) 2021-02-07 17:04:08 -03:00
Matias N
87596d74dd Documentation: introduce hardware platforms documentation 2021-02-07 08:38:51 -03:00