As pointed out in #11322 there is a hardware design issue in RISC-V that
affects RV64 relocations. The problem is with how address bits are loaded
into registers via lui / auipc and sign extension.
If the hi20 relocation value happens to have its 32-bit sign bit set, i.e.
value is 0x80000000 (but not negative! i.e. negative in 64-bit format) the
relocation will fail, as the address is erroneously sign extended:
0x00000000_80000000 becomes 0xffffffff_80000000 which is not correct.
Also, make sure the correct opcode is used with PCREL_HI20, it expects
AUIPC (not LUI). The C compiler will never emit such code but when hand-
writing assembly code this can happen.
There is a problem with the current elf loader for risc-v: when a pair of
PCREL_HI20 / LO12 relocations are encountered, it is assumed that these
will follow each other immediately, as follows:
label:
auipc a0, %pcrel_hi(symbol) // R_RISCV_PCREL_HI20
load/store a0, %pcrel_lo(label)(a0) // R_RISCV_PCREL_LO12_I/S
With this assumption, the hi/lo relocations are both done when a hi20
relocation entry is encountered, first to the current instruction (addr)
and to the next instruction (addr + 4).
However, this assumption is wrong. There is nothing in the elf relocation
specification[1] that mandates this. Thus, the hi/lo relocation always
needs to first fixup the hi-part, and when the lo-part is encountered, it
needs to find the corresponding hi relocation entry, via the given "label".
This necessitates (re-)visiting the relocation entries for the current
section as well as looking for "label" in the symbol table.
The NuttX elf loader does not allow such operations to be done in the
machine specific part, so this patch fixes the relocation issue by
introducing an architecture specific cache for the hi20 relocation and
symbol table entries. When a lo12 relocation is encountered, the cache
can be consulted to find the hi20 part.
[1] https://github.com/riscv-non-isa/riscv-elf-psabi-doc/blob/master/riscv-elf.adoc
we can use uart to debug nuttx,like debugger:
1. read/write memory
2. Use watchpoint,breakpoint,single step.
use up_debugpoint api
3. Ctrl+c to stop, continue, or single step.
hold uart send and receive
4. register a panic event, when crash or assert/panic, we use uart to
debug.
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
Add registration function instrumentation API,
which can achieve instrumentation of entering and
exiting functions through the compiler's functionality.
We can use CONFIG_ARCH_INSTRUMENT_ALL to add instrumentation for all
source, or add '-finstrument-functions' to CFLAGS for Part of the
source.
Notice:
1. use CONFIG_ARCH_INSTRUMENT_ALL must mark _start or entry noinstrument_function,
becuase bss not set.
2. Make sure your callbacks are not instrumented recursively.
use instrument_register to register entry function and exit function.
They will be called by the instrumented function
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
Binary nibble to/from ascii hex conversion was buggy on both
lib_slcdencode and lib_slcddecode libraries.
This bug caused the slcd library to fail to decode 5-byte sequence command
which have 'count' argument value bigger than 0x9.
Signed-off-by: Federico Braghiroli <federico.braghiroli@gmail.com>
Adds support for POSIX interface open_memstream() that allows writing
to dynamic memory buffer stream. The stream is dynamically reallocated
as the buffer grows with initial size set to zero.
The caller has to free the buffer after the stream is closed.
The implementation uses fopencookie() for custom stream operations and
callbacks.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
This moves all the public POSIX semaphore functions into libc and with
this most of the user-space logic is also moved; namely cancel point and
errno handling.
This also removes the need for the _SEM_XX macros used to differentiate
which API is used per user-/kernel mode. Such macros are henceforth
unnecessary.
Fix an issue that math library header files are not exported by make export.
Create symbolic links of libmcs, newlib and openlibm header to nuttx/include.
PR #11165 causes an unnecessary regression; task_delete no longer works,
if the deleted task is from another group.
The logic that prevents this comes from:
nxnotify_cancellation() ->
tls_get_info_pid() ->
nxsched_get_stackinfo()
Which checks for permissions, which does not make sense in this case since
it is the kernel asking for the stack information.
Fix this by partially reverting 11165 and implementing a direct path for
the kernel to query for any tasks TLS.
This moves task / thread cancel point logic from the NuttX kernel into
libc, while the data needed by the cancel point logic is moved to TLS.
The change is an enabler to move user-space APIs to libc as well, for
a coherent user/kernel separation.
Add a minimal implementation to suppress warnings when building
application code shared with other operating systems.
For example:
When building with a c++ compiler and GCC 12.2.0, the following warning is emitted:
nuttx/include/spawn.h:178:40: warning: statement has no effect [-Wunused-value]
178 | #define posix_spawnattr_destroy(attr) (0)
Add support for POSIX interface fmemopen(). This interface open a memory
buffer as a stream and permits access to this buffer specified by mode.
This allows I/O operations to be performed on the memory buffer.
The implementation uses fopencookie() for custom stream operations and
callbacks.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
CPP: nuttx-names.in-> nuttx-names.dat
LD: nuttx
/usr/lib/gcc/x86_64-pc-msys/13.2.0/../../../../x86_64-pc-msys/bin/ld: nuttx.rel:/d/a/nuttx_windows/nuttx_windows/nuttxspace/nuttx/libs/libc/stdlib/lib_exit.c:48: multiple definition of `__dso_handle'; /usr/lib/gcc/x86_64-pc-msys/13.2.0/crtbegin.o:cygming-crtbeg:(.data+0x0): first defined here
Silence two warnings when building libcxx with GCC 12.2.0 and std=c++2b:
libcxx/src/charconv.cpp_CXXFLAGS += -Wno-attributes
- Results from libcxx fallback to use __always_inline__ when exclude_from_explicit_instantiation isn't available.
libcxx/src/locale.cpp_CXXFLAGS += -Wno-attributes
- Results from the expansion of _LIBCPP_CLASS_TEMPLATE_INSTANTIATION_VIS. Should be fine to ignore.
CC: icmp/icmp_input.c modlib/modlib_load.c: In function 'modlib_elfsize':
modlib/modlib_load.c:87:30: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
87 | textaddr = (FAR void *)phdr->p_vaddr;
| ^
cc1: all warnings being treated as errors
Signed-off-by: dongjiuzhu1 <dongjiuzhu1@xiaomi.com>
modlib/modlib_symbols.c: In function ‘modlib_symcallback’:
modlib/modlib_symbols.c:215:13: warning: implicit declaration of function ‘modlib_depend’; did you mean ‘modlib_read’? [-Wimplicit-function-declaration]
215 | ret = modlib_depend(exportinfo->modp, modp);
| ^~~~~~~~~~~~~
| modlib_read
Signed-off-by: dongjiuzhu1 <dongjiuzhu1@xiaomi.com>
CP: nuttx/include/nuttx/config.h
modlib/modlib_init.c:53: warning: "modlib_dumpbuffer" redefined
53 | # define modlib_dumpbuffer(m,b,n) binfodumpbuffer(m,b,n)
|
In file included from modlib/modlib_init.c:36:
nuttx/include/nuttx/lib/modlib.h:64: note: this is the location of the previous definition
64 | # define modlib_dumpbuffer(m,b,n) sinfodumpbuffer(m,b,n)
|
Signed-off-by: dongjiuzhu1 <dongjiuzhu1@xiaomi.com>
__dtoa is not used because currently NuttX uses other
function called __dtoa_engine() to do the same thing
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
This commit adds support for custom stream via fopencookie function.
The function allows the programmer the create his own custom stream
for IO operations and hook his custom functions to it.
This is a non POSIX interface defined in Standard C library and implemented
according to it. The only difference is in usage of off_t instead of
off64_t. Programmer can use 64 bits offset if CONFIG_FS_LARGEFILE is
enabled. In that case off_t is defined as int64_t (int32_t otherwise).
Field fs_fd is removed from file_struct and fs_cookie is used instead
as a shared variable for file descriptor or user defined cookie.
The interface will be useful for future fmemopen implementation.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
both functions aren't suitable to be put into libc,
because they call the kernel internal functions directly.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
When we build NuttX on macOS, it shows many `sed` messages (and the build still completes successfully):
```text
$ tools/configure.sh pinephone:nsh
$ make
sed: illegal option -- r
```
This is due to the Makefiles executing `sed -r` which is not a valid option on macOS.
This PR proposes to change `sed -r` to `sed -E` because:
- `sed -E` on macOS is equivalent to `sed -r` on Linux
- `sed -E` and `sed -r` are aliases according to the GNU `sed` Manual
- `sed -E` is already used in nuttx_add_romfs.cmake, nuttx_add_symtab.cmake and process_config.sh
https://man7.org/linux/man-pages/man2/memfd_create.2.html:
The name supplied in name is used as a filename and will be
displayed as the target of the corresponding symbolic link in the
directory /proc/self/fd/. The displayed name is always prefixed
with memfd: and serves only for debugging purposes. Names do not
affect the behavior of the file descriptor, and as such multiple
files can have the same name without any side effects.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
For programs with the dependencies logic in pthread_once callback , using global locks may cause deadlock:
task A
pthread_once()
|
|-> nxrmutex_lock(&g_lock);
-> init_routine(); // callback to wait task B
task B
pthread_once()
|
->nxrmutex_lock(&g_lock); // Deadlock
->init_routine(); // hold resource to wake up task A
Signed-off-by: hujun5 <hujun5@xiaomi.com>
Domain name has the similar layout as file path, so it's too small
to use 32 bytes as the default value, and better to has the same
default value as PATH_MAX which is 255.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
- Add __config_site for NuttX.
In libcxx 12.0.0. CMake concatenated __config_site with _config,
which enabled NuttX to build without its inclusion. In 15.0.7, this
file is configured by CMake and included explicitly in __config.
- Add additional include directories.
- Mute always_inline warning.
- Make the download of libcxx/libcxxabi configurable
The ipv6 address filled the cache, and the ipv4 address did not have a
place to store it, causing the resolution to fail. so if IPV6 has already
filled the buffer, rewrite ipv4 DNS results from half of the buffer.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
* build-globals.sh
- Only look in the nuttx for external symbols used when loading
dynamic shared objects
* include/elf64.h
- Correct the type of fields in the Elf64_Phdr structure
* libs/libc/dlfcn/lib_dlclose.c
- Distinguish between ET_DYN and other objects as the former
has both text and data in a single allocation to reserve
GOT offsets
* libs/libc/dlfcn/lib_dlopen.c
- Code formatting
* libs/libc/modlib/modlib_bind.c
- Distinguish between relocation entry sizes by section type
- Handle RELA style relocations
* libs/libc/modlib/modlib_globals.S
- Formatting fixes
- Symbols should not be weak - they exist or they don't
* include/nuttx/lib/modlib.h
- Add an inidcator to module_s to distinguish between ET_DYN and other
* libs/libc/modlib/modlib_load.c
- ET_DYN objects need to keep the relative displacement between the text
and data sections due to GOT references from the former to the latter.
This also implies that linking may require modification from the default
for the shared objects being produced. For example, default alignment may
mean nearly 64K of wasted space.
* libs/libc/modlib/modlib_unload.c
sched/module/mod_rmmod.c
- Distingusih between freeing of ET_DYN storage and other as the former
is a single allocation.
* libs/libc/modlib/mod_insmod.c
- Cater for ET_DYN objects having init and preinit sections
VELAPLATFO-16865
Fix warnings:
CC: libmcs/libmcs/libm/common/fenv.c libmcs/libmcs/libm/common/fenv.c:26:15: warning: a function declaration without a prototype is deprecated in all versions of C [-Wstrict-prototypes]
int fegetround()
^
void
Signed-off-by: yanghuatao <yanghuatao@xiaomi.com>
Corresponds to the problem of name resolution with different IP
address types in networks where only one of IPv4 or IPv6 can be
used due to physical layer reasons (e.g., LTE networks).
When we are using newlib as libm, we can consider newlib-esp32 for esp32
hardware. An it contains some optimization for esp32 hardware.
Besides, two small issues has been fixed.
1. add the tar ball to .gitignore
2. Fix the some build warnings
If the gulp size in the stdio buffer the remaining user buffer size it will:
- Corrupt memory in dest (user memory) and
- Keep corrupting KERNEL memory via the stdio character buffer until the
whole system crashes, as the 'remaining' count underflows
This patch fixes this behavior.
To solve the issue of carrying object files from previous builds,
Matias changed the archiving process to re-archive libapps.a on every compilation,
if libapps.a carries more object files, incremental compilation will waste too
many time in re-archiving, compared with the previous implement, this is a degradation
of the build system. Referring to mature engineering projects such as cmake, if there
is configuration or source file changed, the best solution should be to reconfigure
the environment.
Revert this PR to ensure the compilation speed during incremental compilation.
| commit 34b34e2d45 (tag: nuttx-20200914-172150)
| Author: Matias N <matias@protobits.dev>
| Date: Fri Sep 11 22:31:38 2020 -0300
|
| Fix: ensure archive files do not carry object files from prior builds
|
| In some cases, when NuttX configuration changes and this makes the
| object list used to build one of the .a libraries change as well,
| since the command used to build it is "ar crs" and this simply appends
| the list of object files, the library could still include object
| files from prior builds. This commit modifies the ARCHIVE macro to
| erase the .a file if it already exists.
|
| Since in some cases this behavior was actually expected (object
| files from a subdirectory were appended to a library created one
| level above) I added a ARCHIVE_ADD which works as ARCHIVE did.
|
| This change should greatly improve behavior of building after
| configuration changes.
Testing:
sim:nsh
-------------------------------
| Patched | Current
-------------------------------
|$ time make | $ time make
|real 0m1.270s | real 0m1.728s
|user 0m0.971s | user 0m1.276s
|sys 0m0.363s | sys 0m0.530s
-------------------------------
Private project (20+ 3rd library needs archive to libapps.a)
-------------------------------
| Patched | Current
-------------------------------
|$ time make | $ time make
|real 0m21.181s | real 0m39.721s
|user 0m14.638s | user 0m24.837s
|sys 0m6.919s | sys 0m14.394s
-------------------------------
Signed-off-by: chao an <anchao@xiaomi.com>
vfork use waitpid hang father process,
but waitpid release child processs information by default.
So when user call wait, it return errno 10.
Signed-off-by: yangyalei <yangyalei@xiaomi.com>
Provide a way to only customize specific string operations,
such as for memcpy with the DMA capability by ROM.
Signed-off-by: yangdongdong <yangdongdong@xiaomi.com>
update LIBFDT to LIBC_FDT
update CONFIG_LIBFDT_DTC_VERSION to CONFIG_LIBC_FDT_DTC_VERSION
move dtc source code to fdt/dtc
move version_gen.h from apps/system/fdt to current dir
Signed-off-by: liaoao <liaoao@xiaomi.com>
Because multiple dependencies behind the context are compiled in parallel,
if they have dependencies on each other, it will cause compilation errors
Signed-off-by: dongjiuzhu1 <dongjiuzhu1@xiaomi.com>
lib_gethostbyaddrr.c: warning: label 'out_copyname' defined but not used [-Wunused-label] 204 | out_copyname:
Signed-off-by: yangshuyong <yangshuyong@xiaomi.com>
Implement I_SUID/I_SGID feature for binfs in the POSIX compliant way.
If set-user-ID bit is set in the file permissions, then the effective
user ID of process shall be set to UID of the new process image file.
test case:
hello example emulates to set uid and file set-user-ID bit, and call
geteuid and getegid API.
UID = 2000
GID = 3000
MODE = 06555
nsh> ls -l /bin/hello
-r-sr-sr-x 2000 3000 0 hello
nsh> hello
geteuid:2000
getegid:3000
Signed-off-by: fangxinyong <fangxinyong@xiaomi.com>
Fix error :
nuttx/libs/libm/newlib/include/math.h:89:8: error: ‘_Thread_local’ does not name a type; did you mean ‘thread_local’?
89 | extern _Thread_local int _tls_gamma_signgam;
| ^~~~~~~~~~~~~
| thread_local
In file included from /mnt/nuttx/include/libcxx/math.h:300,
from /mnt/nuttx/include/libcxx/cmath:308,
from /mnt/nuttx/include/libcxx/charconv:79,
from libcxx/src/string.cpp:10:
/mnt/nuttx/libs/libm/newlib/include/math.h:89:8: error: ‘_Thread_local’ does not name a type; did you mean ‘thread_local’?
89 | extern _Thread_local int _tls_gamma_signgam;
Signed-off-by: yanghuatao <yanghuatao@xiaomi.com>
The memory allocated with strdup and asprintf is done via lib_malloc
so we need to use lib_free to deallocate memory otherwise the assertion
"Free memory from the wrong heap" is hit with flat mode and user separated
heap enabled mode.
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
1. add lib_fork api in libs/libc, we need a fork() api to implement the
fork relative method, such as pthread_atfork
2. rename the assembly fork entry function name to up_fork(), and rename
the up_fork() to arch specific name, such as
sim_fork()/arm_fork()/mips_fork() etc.
Signed-off-by: guoshichao <guoshichao@xiaomi.com>
