Use GS base regsiter to store reference to CPU private data.
Then we can easily refer to private CPU data using the GS segment.
Required for SMP support.
Signed-off-by: p-szafonimateusz <p-szafonimateusz@xiaomi.com>
This adds SBI specfication v0.3 based `riscv_sbi_system_reset()` to
support SBI firmware based system reset in kernel mode.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
This patch adds definitions to support user space device mappings
that allows devices like frame buffer to be accessible from user
space in kernel mode.
The are mainly two changes:
- in `mm/`:
added vm_map_region(), vm_unmap_region() for drivers to do
device mapping easily.
- in `arch/`:
extended ARCH_SHM_NPAGES as user-space mapping region size.
decoupled ARCH_SHM_MAXREGIONS from region size calculations and
limit its usage only for SysV shm purposes.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
- Add ARCH_KVMA_MAPPING to guard kernel mapping.
- Set dependency from MM_KMAP to ARCH_KVMA_MAPPING, as per commit
70de321de3.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
We can decide whether use trustzone
After this patch, we can support the following mode:
ARCH_HAVE_TRUSTZONE ARCH_TRUSTZONE_DISABLED ARCH_TRUSTZONE_SECURE ARCH_TRUSTZONE_NONSECURE
Without Security Extensions n n n n
CHIP have NO trustzone
With Security Extensions y y n n
Only one bin in sec mode
With Security Extensions y n y n
TEE bin in sec mode
With Security Extensions y n n y
REE bin in non-sec mode
Signed-off-by: ligd <liguiding1@xiaomi.com>
When an application is being loaded `up_addrenv_create ` calls
`create_region` to create the address environment. Only the first
entry is mapped when the region is created. Virtual memory that is
not mapped will trigger an exception when accessed. Other memory
pages are allocated and mapped on-demand. This enables setting
larger heap and stack for the process without compromising the
overall system memory.
Current `CONFIG_PAGING` refers to an experimental implementation
to enable embedded MCUs with some limited RAM space to execute
large programs from some non-random access media.
On-demand paging should be implemented for the kernel mode with
address environment implementation enabled.
enable FPU and implement up_fpucmp to pass ostest
With aggressive optimization enabled (-O2/-O3), ostest FPU test will fail.
This is because the compiler will generate additional vector
instructions between subsequent up_fpucmp() calls (loop vectorization
somewhere in usleep() call), which will consequently overwrite
the expected FPU context (XMM registers).
Signed-off-by: p-szafonimateusz <p-szafonimateusz@xiaomi.com>
Add support for tricore TC397
1. Porting based on AURIX TC397 KIT_A2G_TC397_5V_TFT evaluation board
https://www.infineon.com/cms/en/product/evaluation-boards/kit_a2g_tc397_5v_tft/
2. In order to avoid license and coding style issues, The chip-level code
still uses the implementation of AURIX Development Studio SDK.
The SDK package will be downloaded as a third-party package during compilation:
https://github.com/anchao/tc397_sdk
3. Single core only, SMP implementation will be provided in the future.
4. Implemented the basic System Timer, ASCLIN UART driver.
5. Only the Tasking tool chain is supported (ctc/ltc, license maybe required)
6. 'ostest' can be completed on the TC397 development board.
How to run?
1. Setup the tasking toolchain and license
$ export TSK_LICENSE_KEY_SW160800=d22f-7473-ff5d-1b70
$ export TSK_LICENSE_SERVER=192.168.36.12:9090
2. Build nuttx ELF
$ ./tools/configure.sh tc397/nsh
$ make -j
...
artc I800: creating archive libc_fpu.a
LD: nuttx
3. Switch to windows PC, setup AURIX-studio to Debugger Launcher
4. Replace runing ELF to nuttx, and re-download ELF
Signed-off-by: chao an <anchao@lixiang.com>
The RPTUN_PING option has been replaced by RPMSG_PING but this
use for PERF_EVENTS is left behind, so replace it here as well.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
new options to enable toolchain support for quadruple precision
(128 bits or 16 bytes) floating point if both the toolchain and
the hardware support it.
Signed-off-by: chao an <anchao@lixiang.com>
This is to align with ARCH_KMAP_VBASE by source codes.
It also fixes fake warnings from `tools/refresh.sh`.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
Add registration function instrumentation API,
which can achieve instrumentation of entering and
exiting functions through the compiler's functionality.
We can use CONFIG_ARCH_INSTRUMENT_ALL to add instrumentation for all
source, or add '-finstrument-functions' to CFLAGS for Part of the
source.
Notice:
1. use CONFIG_ARCH_INSTRUMENT_ALL must mark _start or entry noinstrument_function,
becuase bss not set.
2. Make sure your callbacks are not instrumented recursively.
use instrument_register to register entry function and exit function.
They will be called by the instrumented function
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
Summary:
- Temporarily disables ARCH_HAVE_FORK for arm64 to address a crash issue,
as detailed in https://github.com/apache/nuttx/pull/9755.
- This is a precautionary measure until a more permanent solution is implemented.
Impact:
- Temporarily limits certain functionalities on arm64,
but necessary to ensure system stability.
Testing:
- Successfully tested on QEMU-8.1.2.
- Note: please apply the changes from https://github.com/apache/nuttx-apps/pull/1962.
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
This option enables architecture-specific memory copy for dynamic code loading.
For example, Ambiq has MRAM regions for instruction which can't load by
the memcpy directly.
Signed-off-by: wangjianyu3 <wangjianyu3@xiaomi.com>
Adding the CONFIG_ARCH_PERF_EVENTS configuration to enable
hardware performance counting，solve the problem that some platform
hardware counting support is not perfect, you can choose to use
software interface.
This is configured using CONFIG_ARCH_PERF_EVENTS, so weak_functions
are removed to prevent confusion
To use hardware performance counting, must:
1. Configure CONFIG_ARCH_PERF_EVENTS, default selection
2. Call up_perf_init for initialization
Signed-off-by: wangming9 <wangming9@xiaomi.com>
The implementation of up_perf_*() is in a different static library in nuttx:
Hardware: libarch.a
Software: libdrivers.a (weak function)
Since functions with weak attributes cannot be correctly replaced in multiple static libraries,
this PR will use macros to replace whether the arch supports hardware perf events
Signed-off-by: chao an <anchao@xiaomi.com>
1. as we can use fork to implement vfork, so we rename the vfork to
fork, and use the fork method as the base to implement vfork method
2. create the vfork function as a libc function based on fork
function
Signed-off-by: guoshichao <guoshichao@xiaomi.com>
This change allows boards to define an additional kconfig option, which specifies the final link format of application executables.
By selecting `CONFIG_BINFMT_ELF_RELOCATABLE`, and providing an appropriate linker script, applications can be fully linked, removing the need to process relocations.
When asserting, automatically analyze whether
there is a deadlock in the thread, and if there
is a deadlock, print out the deadlocked thread.
The principle is to analyze whether there is
a lock ring through the tcb holder.
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
This adds functionality to map pages dynamically into kernel virtual
memory. This allows implementing I/O remap for example, which is a useful
(future) feature.
Now, the first target is to support mapping user pages for the kernel.
Why? There are some userspace structures that might be needed when the
userspace process is not running. Semaphores are one such example. Signals
and the WDT timeout both need access to the user semaphore to work
properly. Even though for this only obtaining the kernel addressable
page pool virtual address is needed, for completeness a procedure is
provided to map several pages.
