Xiang Xiao
ef1a98dd00
Remove the unneeded void cast
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-04-17 23:32:05 +03:00
Xiang Xiao
6af167c086
arch/sparc: Remove FAR from chip and board folder
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-04-17 18:42:38 +03:00
Xiang Xiao
977fa987e2
arch/mips: Remove FAR from chip and board folder
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-04-17 18:42:38 +03:00
Xiang Xiao
af00e016e9
arch/sim: Remove FAR from chip and board folder
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-04-17 18:42:38 +03:00
Xiang Xiao
6bc61b5752
arch/xtensa: Remove FAR from chip and board folder
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-04-17 18:42:38 +03:00
Jan Charvat
6d566e0fda
boards/risc-v/esp32c3: ESP32C3 TWAI (CAN) controller config for DevKitM-1.
...
Signed-off-by: Jan Charvat <jancharvat.charvat@gmail.com>
2022-04-15 22:55:26 +08:00
Jan Charvat
0d9d2f4bf8
boards/risc-v/esp32c3: ESP32C3 TWAI (CAN) controller bringup for DevKitM-1.
...
Signed-off-by: Jan Charvat <jancharvat.charvat@gmail.com>
2022-04-15 22:55:26 +08:00
Petro Karashchenko
09b3fb25ab
drivers: remove unimplemented open/close/ioctl interfaces
...
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
2022-04-15 16:56:25 +08:00
Xiang Xiao
6041a2f0db
boards/esp32_twai: Remove arm_arch.h from comment
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-04-15 11:50:02 +03:00
Xiang Xiao
382b6d3b6f
boards/arm/a1x: Remove the check CONFIG_ARCH_FPU around arm_fpuconfig
...
forget in below change:
commit df5a8a53ae
Author: Xiang Xiao <xiaoxiang@xiaomi.com>
Date: Tue Apr 12 03:18:46 2022 +0800
arch/arm: Move FPU initialization to common place
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-04-14 23:09:42 +03:00
Alan C. Assis
c232be541c
Add SPIRAM to ESP32-S2
2022-04-14 22:10:23 +08:00
Huang Qi
1975878835
arch/risc-v: Apply common mtime driver to mtime based chps
...
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
2022-04-12 12:14:40 +03:00
Lingao Meng
a56199c7dd
sim: bt: Add specific bluetooth HCI number id
...
Add option for attached the local bluetooth device use
specific bluetooth HCI number id.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
2022-04-12 15:15:25 +08:00
SPRESENSE
64e5867a8b
cxd56/spresense: Add callback mechanism to notice SDCard injection
...
Add a mechanism to callback to an application to notice the SDCard
status is changed (inserted or ejected).
2022-04-12 07:55:00 +09:00
SPRESENSE
81534df8a3
boards: cxd56xx: Add board function for scd41 sensor driver
...
Add board function for SCD41 CO2, temperature and humidity sensor driver.
2022-04-12 07:55:00 +09:00
SPRESENSE
771bd8ca17
board/spresense: Add pin selection of ILI934x
...
Add Kconfig choice for selecting RST and DC pins on ILI934x LCD.
2022-04-12 07:55:00 +09:00
SPRESENSE
22d2ef0bf4
boards: cxd56xx: Make board_late_initialize a weak function
...
Add a weak_function to the board_late_initialize function so that
it can be replaced by another file, such as a user application.
2022-04-12 07:55:00 +09:00
SPRESENSE
c2e45444ff
boards: cxd56xx: Fix an issue i2c tool not working
...
It caused i2c tool not to work due to i2c uninitializing processing.
Since this process is not necessary in the normal case, we will
move it to the error case.
2022-04-12 07:55:00 +09:00
Xiang Xiao
c235c0fa43
boards/lx_cpu: Enable up_perf API
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-04-08 21:02:13 -03:00
Xiang Xiao
1f7b49d700
boards/nucleo-h743zi2: Enable up_perf API
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-04-08 21:02:13 -03:00
Jiuzhu Dong
d87cf8d4ca
fs/poll: change format for type pollevent_t
...
Signed-off-by: Jiuzhu Dong <dongjiuzhu1@xiaomi.com>
2022-04-07 12:14:06 +08:00
yinshengkai
db012687f9
arch/sim: support simulator keyboard devices
2022-04-06 15:26:57 +03:00
Alan C. Assis
b8a9d7da19
esp32: Add board support to TWAI/CANBus
2022-04-06 15:09:46 +03:00
Michael Jung
747da36eae
b-u585i-iot02a:nsh: Drop TrustedFirmware-M dependency
...
Make the nsh defconfig for the b-u585i-iot02a run stand-alone (i.e. not
as a companion that relies on TF-M doing low-level board
initialization).
2022-04-03 23:20:03 +03:00
Michael Jung
9d07559906
b-u585i-iot02a: Fix stdclock initialization
...
Correct the respective defines to initialize the B-U585I-IOT02A clock
tree correctly by means of stm32_stdclockconfig().
2022-04-03 23:20:03 +03:00
raiden00pl
7403678db7
boards/nucleo-f446re: initialize up_perf
2022-04-02 10:34:35 -03:00
Ville Juven
c15b6701ce
RISC-V: Implement option to run NuttX in supervisor mode (S-mode)
...
- Add config "ARCH_USE_S_MODE" which controls whether the kernel
runs in M-mode or S-mode
- Add more MSTATUS and most of the SSTATUS register definitions
- Add more MIP flags for interrupt delegation
- Add handling of interrupts from S-mode
- Add handling of FPU from S-mode
- Add new context handling functions that are not dependent on the trap
handlers / ecall
NOTE: S-mode requires a companion SW (SBI) which is not yet implemented,
thus S-mode is not usable as is, yet.
2022-04-01 16:19:42 -03:00
田昕
4071f460b2
boards/boardctl:common boardctl to read reset cause.
...
Signed-off-by: 田昕 <tianxin7@xiaomi.com>
2022-03-30 09:59:10 +03:00
Gustavo Henrique Nihei
e1f28c19c2
arch/arm: Make CXX exception and RTTI depend on Kconfig options
...
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
2022-03-30 11:19:29 +08:00
Gustavo Henrique Nihei
7b4d9f0afd
esp32[s2/s3/c3]: Add defconfigs for testing C++
...
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
2022-03-30 11:19:29 +08:00
Gustavo Henrique Nihei
06d0a9f1ad
xtensa|risc-v: Make CXX exception and RTTI depend on Kconfig options
...
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
2022-03-30 11:19:29 +08:00
Gustavo Henrique Nihei
a0617177e8
risc-v/esp32c3: Fix inclusion of C++ constructors/destructors table
...
RISC-V GCC is configured with --enable-initfini-array so it emits an
.init_array section instead of .ctors
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
2022-03-30 11:19:29 +08:00
Lee Lup Yuen
416ec42077
riscv/esp32c3: Remove check for LCD driver
...
## Summary
`esp32c3_spi2_cmddata()` implements SPI Cmd/Data `SPI_CMDDATA()` for only 3 LCD drivers: ST7735, ST7789 and GC9A01.
This patch removes the check for LCD drivers, so that SPI Cmd/Data will work for all LCD drivers.
More details: https://github.com/apache/incubator-nuttx/pull/5898
## Impact
This change impacts LCD drivers that call `SPI_CMDDATA()`.
Previously `SPI_CMDDATA()` would fail with `ENODEV` for LCD drivers other than ST7735, ST7789 and GC9A01.
After patching, `SPI_CMDDATA()` will work correctly with all LCD drivers.
## Testing
This is a minor patch so no testing is needed.
2022-03-29 23:09:57 -03:00
Richard Tucker
dc93c309b5
boards/risc-v/litex/arty_a7: update README to include building in LITESDCARD peripheral
2022-03-30 02:35:27 +08:00
Richard Tucker
3939575d7c
boards/risc-v/litex/arty_a7: add SDCARD support for the Arty_A7 board
2022-03-30 02:35:27 +08:00
Petro Karashchenko
f5665db1f2
boards: correct path to RCRAWS files during file copy
...
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
2022-03-29 12:11:09 +08:00
Ville Juven
30c25a95f3
MPFS: Fix error in flat build linker script
...
Use sram instead of ksram (copy&paste error)
2022-03-28 14:05:51 +03:00
Petro Karashchenko
c61710c7b8
boards/arm/uid: fix pointer to int compare
...
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
2022-03-28 00:31:27 +08:00
zouboan
466063ac9e
sched/sched/sched_timerexpiration: change from sched_time to eventtime
...
Co-authored-by: Petro Karashchenko <petro.karashchenko@gmail.com>
2022-03-27 18:22:58 +03:00
ligd
f623ac0f13
armv7-m/armv8-m: move up_pref* api to common place
...
Signed-off-by: ligd <liguiding1@xiaomi.com>
Signed-off-by: chao.an <anchao@xiaomi.com>
2022-03-26 13:39:18 +02:00
Gustavo Henrique Nihei
0f0f85979e
sim: Enable CXX_EXCEPTION and CXX_RTTI on C++ defconfigs
...
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
2022-03-26 05:56:37 +02:00
Gustavo Henrique Nihei
2cd1769619
libxx: Add CXX_RTTI for enabling RTTI support for C++ applications
...
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
2022-03-26 05:56:37 +02:00
Gustavo Henrique Nihei
5198a56fe8
esp32s3-devkit: Fix the number of memory regions in some configurations
...
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
2022-03-25 15:56:44 +02:00
Masayuki Ishikawa
594ae1e7fc
boards: rv-virt: Fix stack corruption for rv64 configs
...
Summary:
- This commit fixes stack corruption for rv64 configs
Impact:
- None
Testing:
- Tested with qemu-6.2
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2022-03-25 12:26:12 +02:00
Michael Mogenson
97fa9b849c
defconfig: add Lua configs for sim and teensy-4.x
2022-03-24 14:02:32 +08:00
Gustavo Henrique Nihei
c92c4af304
xtensa/esp32s2: Initialize instruction cache on startup
...
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
2022-03-23 20:05:40 -03:00
Gustavo Henrique Nihei
7cb8f02ecc
esp32s2-saola-1: Use cache-related definitions from Kconfig
...
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
2022-03-23 19:38:28 -03:00
Gustavo Henrique Nihei
04b80cc8d2
xtensa/esp32s2: Remove unused and not unsupported configs from Kconfig
...
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
2022-03-23 19:38:28 -03:00
Gustavo Henrique Nihei
23cfded18f
esp32s3-devkit: Add support for BOOT button as user button
...
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
2022-03-23 07:23:51 +09:00
Petro Karashchenko
68902d8732
pid_t: unify usage of special task IDs
...
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
2022-03-22 21:22:32 +08:00