Commit Graph

92 Commits

Author SHA1 Message Date
Masayuki Ishikawa
e33fc3dc89 Squashed commit of the following:
Author: Gregory Nutt <gnutt@nuttx.org>

    Run all .c and .h modified in PR through nxstyle.

Author: Masayuki Ishikawa <masayuki.ishikawa@gmail.com>

    feature k210 (#16)

    * arch: risc-v: Add support for __LP64__ to types.h
    * arch: risc-v: Add support for RV64GC to common files
    * arch: risc-v: Add support for Kendryte K210 processor (RV64GC)
    * boards: risk-v: Add support for Sipeed Maix Bit with K210
    * tools: Add support for Kendryte K210 processor
2019-12-31 09:06:20 -06:00
Gregory Nutt
6b66ac0e04 Some minor changes from review of last PR. 2019-11-28 14:45:16 -06:00
Anjana
fae7e63479 We have ported NuttX on Renesas RX65N Micro-controller. This port includes following interfaces
1. Serial (UART) driver (13 ports)
2. Ethernet driver

This port is provided on two boards
1. RSK RX65N-2MB
2. GR-Rose

The port is built on Cygwin environment.

As part of this port, we have created two documents
1. Readme.txt for each board
2. User manual to provide information about development environment setup
Both these documents are placed under
1. /boards/renesas/rx65n/rx65n-grrose
2. /boards/renesas/rx65n/rx65n-rsk2mb

We have run 'nxstyle' for coding guidelines and 'ostest' for testing NuttX features on test platform.
We have shared the log with no errors as confirmation of valid port.
2019-10-11 23:36:57 +08:00
Gregory Nutt
312a8c6851 tools/testbuild.sh: Reapply edb19474bc, it was an error to revert it. The cause of the problem appears to be elsewhere. 2019-10-03 08:03:30 -06:00
Gregory Nutt
a5fecf88dc Revert "tools/testbuild.sh: Use CPU option on 'make distclean' too, but not 'make olddefconfig."
This reverts commit edb19474bc.
2019-10-03 07:55:54 -06:00
Gregory Nutt
4c8854b3c6 tools/testbuild.sh: Remove a spurious semicolon that was causing some errors. 2019-10-03 07:52:16 -06:00
Gregory Nutt
edb19474bc tools/testbuild.sh: Use CPU option on 'make distclean' too, but not 'make olddefconfig. 2019-10-02 17:26:12 -06:00
Gregory Nutt
6371b4915c tools/testbuild.sh: Add an option to select the number of CPUs to use with 'make' 2019-10-02 17:11:33 -06:00
Gregory Nutt
2a228e8650 Fleshs out a few more things needed to compile and build the S32K118EVB board configuration.
Squashed commit of the following:

    arch/arm/include:  Add interrupt IRQ numbers.
    tools/: Add support for the S32K1XX family.
2019-08-14 10:57:54 -06:00
Manuel Stühn
5585cc421c Merged in manuelstuehn/nuttx/feature/bsd-portable (pull request #975)
change all occurences of /bin/(ba)sh to /usr/bin/env bash which appears more portable

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-08-10 15:57:26 +00:00
Gregory Nutt
f75fba05e7 tools/testbuild.sh: Remove some recently introduced echo's that clutter the build test output 2019-08-08 12:37:37 -06:00
Gregory Nutt
4635e238c7 tools/testbuld.sh: Fix a copy/paste error 2019-08-07 17:56:32 -06:00
Gregory Nutt
4b6f634a90 tools/: Update and verify all configuration related tools with new, boards directory layout. 2019-08-07 17:25:54 -06:00
Gregory Nutt
d4d67ec425 tools/: Update configuration-related tools for last change to boards/ directory organization. 2019-08-06 10:39:12 -06:00
Gregory Nutt
721994846c tools/: Change preferred argument of configurations tools to use ':' as the delimiter between <board-name> and <config-name>. This is to emphasize that this is not a path; it is configuration specification.
The legacy '/' delimiter is still supported but not recommend and not advertised.

Squashed commit of the following:

    Update configurations instructions in more README.txt files to show ':' delimiter vs '/' delimiter.
    Update configurations instructions in various README.txt file to show ':' delimiter vs '/' delimiter.
    tools:  Update all configuration-related tools to accept ':' separator between board and configuration name.
2019-08-05 16:55:51 -06:00
Gregory Nutt
e1588f6cc2 tools/testbuild.sh: Fixes needed for changes to boards/ directory structure. 2019-08-05 09:14:30 -06:00
Alin Jerpelea
a1c991d921 Merged in alinjerpelea/nuttx (pull request #963)
Move boards to boards folder

* boards: rename configs folder to boards

    This is the proposed layout after the change:

    boards: - folder containing board folders
            <board>: - name of each board
                    drivers: - extra drivers specific for platform
                    include: - header files for the boars
                    scripts: - extra scripts specific for platform
                        src: - board specific code
                      tools: - extra tools specific for platform
                    <config>: - board specific configuration(s)

    Note:
    <xxx> names are dependent on platform

    This is a logical change to aim to the arch layout but this is a
    huge change it should be done in several steps to lower the risk.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* Kconfig: replace configs with boards

    The change is needed after the path change

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* Makefile: replace configs with boards

    The change is needed after the path change

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* Makefile.*: replace configs with boards

    The change is needed after the path change

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* Make.defs: replace configs with boards

    The change is needed after the path change

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* .sh: replace configs with boards

    The change is needed after the path change

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* .mk: replace configs with boards

    The change is needed after the path change

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* .c & .h: replace configs with boards

    The change is needed after the path change

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* .bat: replace configs with boards

    The change is needed after the path change

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-08-05 12:04:14 +00:00
Gregory Nutt
8ed0d21b73 tools/tesbuild.sh: Correct help test. 2019-03-28 12:12:15 -06:00
Gregory Nutt
68a7fbf109 tools/tesbuild.sh: No longer installs and builds the NxWidgets libraries. They are now a port of apps/. 2018-09-16 07:13:18 -06:00
Gregory Nutt
7415f62891 tools/testbuild.sh: Add option to specific location of nuttx directory. 2018-06-27 12:27:34 -06:00
Gregory Nutt
d52c63f632 Change all references from OSX to macOS 2018-06-01 13:25:50 -06:00
Gregory Nutt
1bc0eea143 tools/tesbuild.sh: Fix missing $ before variable name. 2017-07-10 10:39:31 -06:00
David Sidrane
48fb789cf3 testbuild:Added -x to fail build on errors for CI
On CI we want to know ASAP of a failure. This adds the
   -x (exit on build failures) option to faclitate that
   behavior.

   Use ${MAKE} ${MAKE_FLAGS} for make invocation.
   When -x is provided change MAKE_FLAGS to
   --silent --no-print-directory and set -e

   Ignore exit status when using grep for checking
   for CONFIG_NXWM=y
2017-06-13 08:35:21 -10:00
Gregory Nutt
6e4918c557 Remove CONFIG_ARM_TOOLCHAIN_GNU; replace with CONFIG_ARCH_TOOLCHAIN_GNU 2017-05-13 13:28:15 -06:00
Gregory Nutt
ca116647a8 tools/testbuild.sh: Add debug option (-d) 2017-03-10 13:13:30 -06:00
Gregory Nutt
a323fb91d0 tools/: Small simplication to usage 2017-01-01 15:39:24 -06:00
Gregory Nutt
34be3e7c3c Add configuration support for builds with Ubuntu under Windows 10 2017-01-01 15:34:23 -06:00
Gregory Nutt
6be282af96 Add tools/sethost.sh. This is a script that you can use to quickly change the host platform from Linux to Windows/Cygwin. Might save you a lot of headaches. 2016-08-03 16:31:35 -06:00
Gregory Nutt
85c6263a30 tools/testbuild.sh was testing .config before configured. 2016-06-06 09:32:25 -06:00
Gregory Nutt
7fa31493c9 Update tools/tesbuild.sh 2016-06-05 13:19:41 -06:00
Gregory Nutt
f36e342f38 tools/tesbuild.sh will now build NxWM configurations 2016-06-05 12:14:34 -06:00
Gregory Nutt
2902dc8c3e Restore top-level .gitignore; testbuild.sh must distinguish CONFIG_ARM_TOOLCHAIN_GNU from other symbols that begin with the same string 2016-04-10 09:11:48 -06:00
Gregory Nutt
45f57ca82a testbuild.sh: Needs to avoid disabling CONFIG_ARM_TOOLCHAIN_GNU 2016-04-10 08:51:59 -06:00
Gregory Nutt
fea11c002a Build system: Add 'make oldconfig' target. Use this option in tools/testbuild.sh. Add --silent option to tools/refresh.sh so that it can be run in batch without human interaction 2016-03-08 16:50:58 -06:00
Gregory Nutt
88d8a81b23 tools/testbuild.sh: kconfig-conf was silently failing because (1) it needs to execute from the top-level NuttX directory and (2) apps/Kconfig does not yet exist 2016-03-08 14:12:44 -06:00
Gregory Nutt
4a59ff34e9 Update submodules 2016-01-28 09:53:47 -06:00
Gregory Nutt
00e0ff54e8 tools/testbuild.sh: Changes needed for testing the simulator under Cygwin 2015-11-30 13:06:16 -06:00
Gregory Nutt
fc0c775b6f Extended tools/testbuild.sh to work with simulator builds which have no toolchain definition 2015-11-29 14:42:32 -06:00
Gregory Nutt
fbcdb663f9 tools/testbuild.sh: Skip lines in test list that begin with # 2015-07-22 13:20:35 -06:00
Gregory Nutt
9f3663152d Fix a typo in script echo output 2015-07-03 14:38:16 -06:00
Gregory Nutt
8c5bae60d9 tools/testbuild.sh: Add an option to select the type of C++ size_t in new operator 2015-07-01 14:32:59 -06:00
Gregory Nutt
092a8a8aed tools/testbuild.sh: Add a script that can be used perform test builds on a set of board configurations 2015-06-30 14:38:01 -06:00