1. separate command catagory of bt/pktradio from wireless ioctl
2. Remove commoand count limit to support vendor command
Signed-off-by: chao an <anchao@xiaomi.com>
* net/netdev/netdev_ioctl.c:
(netdev_ifr_ioctl): The ioctl SIOCGIFHWADDR provides the hardware
address (e.g., Ethernet MAC, etc.) of a network interface. It is
based on Linux. (BSD-based systems don't have this ioctl.) The Linux
implementation sets sa_family to ARPHRD_ETHER for Ethernet and IEEE
802.11 interfaces [1]. NuttX was setting it to NET_SOCK_FAMILY for
these interface types as well as 6LoWPAN and PKTRADIO; this was
incorrect and also the value of NET_SOCK_FAMILY varies based on
Kconfig settings. Correcting this to ARPHRD_ETHER for Ethernet and
IEEE 802.11 and ARPHRD_IEEE802154 for 6LoWPAN and PKTRADIO.
References:
[1] 'man 7 netdevice' on Linux.
* net/netdev/netdev_ioctl.c:
(netdev_ifr_ioctl): The ioctl SIOCSIFHWADDR sets the hardware address
(e.g., Ethernet MAC, etc.) of a network interface. Radio devices may
have different lengths of hardware addresses, such as
NET_6LOWPAN_EADDRSIZE (8), NET_6LOWPAN_SADDRSIZE (2), or
RADIO_MAX_ADDRLEN (8). Also, Kconfig CONFIG_PKTRADIO_ADDRLEN allows
the user to set any arbitrary size. Note that while the sister ioctl
SIOCGIFHWADDR "get hardware address" copies
`dev->d_mac.radio.nv_addrlen` bytes, SIOCSIFHWADDR was copying
NET_6LOWPAN_ADDRSIZE bytes unconditionally. Depending on which radio
is used, this could be incorrect. Fixing it to use
`dev->d_mac.radio.nv_addrlen` for SIOCSIFHWADDR as well. Also adding
DEBUGASSERT to ensure this is within bounds of source and
destination of the copy.
This fixes a regression caused by the following commit,
which prevents the file flag from being updated.
```
commit 28860b5242
Author: chao.an <anchao@xiaomi.com>
Date: Sat Mar 19 14:47:37 2022 +0800
net/netdev: fix switch case missing break
Signed-off-by: chao.an <anchao@xiaomi.com>
```
Note: some applications like mbedtls uses F_GETFL to confirm
the nonblock-ness of the socket. This is critical for such
applications.
error:
--------------------------------------
netdev/netdev_lladdrsize.c: In function ‘netdev_lladdrsize’:
netdev/netdev_lladdrsize.c:148:7: error: duplicate case value
148 | case NET_LL_BLUETOOTH:
| ^~~~
netdev/netdev_lladdrsize.c:119:7: note: previously used here
119 | case NET_LL_BLUETOOTH:
| ^~~~
BLUETOOTH_HDRLEN has been removed by:
---------------------------------
|commit aae0d92598
|Author: Gregory Nutt <gnutt@nuttx.org>
|Date: Sun Apr 1 15:21:58 2018 -0600
|
|wireless/bluetooth and net/bluetooth:
|
|Clean up some garbage left in Kconfig file that broke 'make menuconfig'.
|Clean up some craziness with Bluetooth frame length definitions.
Signed-off-by: chao.an <anchao@xiaomi.com>
Fix the arp address changed if netdev renew, since the
arp table should be cleared when the netdev carrier off
Signed-off-by: songlinzhang <songlinzhang@xiaomi.com>
In case of enabled packet forwarding mode, packets were forwarded in a reverse order
because of LIFO behavior of the connection event list.
The issue exposed only during high network traffic. Thus the event list started to grow
that resulted in changing the order of packets inside of groups of several packets
like the following: 3, 2, 1, 6, 5, 4, 8, 7 etc.
Remarks concerning the connection event list implementation:
* Now the queue (list) is FIFO as it should be.
* The list is singly linked.
* The list has a head pointer (inside of outer net_driver_s structure),
and a tail pointer is added into outer net_driver_s structure.
* The list item is devif_callback_s structure.
It still has two pointers to two different list chains (*nxtconn and *nxtdev).
* As before the first argument (*dev) of the list functions can be NULL,
while the other argument (*list) is effective (not NULL).
* An extra (*tail) argument is added to devif_callback_alloc()
and devif_conn_callback_free() functions.
* devif_callback_alloc() time complexity is O(1) (i.e. O(n) to fill the whole list).
* devif_callback_free() time complexity is O(n) (i.e. O(n^2) to empty the whole list).
* devif_conn_event() time complexity is O(n).
In the current net stack implementation, there is no mechanism
for notifying the loss of the wireless connection, if the network
is disconnected then application sends data packets through tcp,
the tcp_timer will keep retrying fetch the ack for awhile, the
connection status will not be able to be switched timely.
Change-Id: I84d1121527edafc6ee6ad56ba164838694e7e11c
Signed-off-by: chao.an <anchao@xiaomi.com>
* Simplify EINTR/ECANCEL error handling
1. Add semaphore uninterruptible wait function
2 .Replace semaphore wait loop with a single uninterruptible wait
3. Replace all sem_xxx to nxsem_xxx
* Unify the void cast usage
1. Remove void cast for function because many place ignore the returned value witout cast
2. Replace void cast for variable with UNUSED macro
Squashed commit of the following:
sched/sched/sched_getsockets.c: Fix an error in conditional compilation.
fs/: Remove all conditional logic based on CONFIG_NSOCKET_DESCRIPTORS == 0
Documentation/: Remove all references to CONFIG_NSOCKET_DESCRIPTORS == 0
include/: Remove all conditional logic based on CONFIG_NSOCKET_DESCRIPTORS == 0
libs/: Remove all conditional logic based on CONFIG_NSOCKET_DESCRIPTORS == 0
net/: Remove all conditional logic based on CONFIG_NSOCKET_DESCRIPTORS == 0
sched/: Remove all conditional logic based on CONFIG_NSOCKET_DESCRIPTORS == 0
syscall/: Remove all conditional logic based on CONFIG_NSOCKET_DESCRIPTORS == 0
tools/: Fixups for CONFIG_NSOCKET_DESCRIPTORS no longer used to disable sockets.
net/mld: The MLD logic now compiles and is much less toxic. It still is not a proper MLD implementation: (1) It is basically a port of IGMP, tweaked to work with IPv6 and ICMPv6 MLD messages, (2) it needs a proper analysis and comparison with RFC 3810, and (3) it is completely untested. For this reason, it will remain EXPERIMENTAL for some time.
net/mld: Add some missing macros, more fixes related to IPv6 vs IPv4 types,
net/mld: More compilation cleaning. Most fixups for IPv6 vs IPv4 types.
net/mld: Hook crudely converted .c files into build system and resolve a few of the many, many compilation/design problems.
net/mld: Add support for MLD statistics.
net/mld: Hook in MLD poll and packet transmission logic.
net/mld: Change references to IPv4 definitions to IPv6 definitions; Remove mld_input() since MLD piggybacks on ICMPv6 input. Add functions to catch MLD messages dispatched by ICMPv6 input logic.
net/mld: As a starting point, copy all net/igmp/*.c files to net/mld/. and change all occurrences of igmp (or IGMP) to mld (or MLD).
net/mld: More compilation cleaning. Most fixups for IPv6 vs IPv4 types.
net/mld: Hook crudely converted .c files into build system and resolve a few of the many, many compilation/design problems.
net/mld: Add support for MLD statistics.
net/mld: Hook in MLD poll and packet transmission logic.
net/mld: Change references to IPv4 definitions to IPv6 definitions; Remove mld_input() since MLD piggybacks on ICMPv6 input. Add functions to catch MLD messages dispatched by ICMPv6 input logic.
net/mld: As a starting point, copy all net/igmp/*.c files to net/mld/. and change all occurrences of igmp (or IGMP) to mld (or MLD).
Squashed commit of the following:
Fix up some final compile isses.
net/netdev: Convert the network down notification logic to use the new wqueue-based notification factility.
net/udp: Convert the UDP readahead notification logic to use the new wqueue-based notification factility.
net/tcp: Convert the TCP readahead notification logic to use the new wqueue-based notification factility.
mm/iob: Convert the IOB notification logic to use the new wqueue-based notification factility.
sched/wqueue: Signals are not good IPCs to support the target poll functionality for several reasons including the amount of data that can be passed with a signal and in the fact that in protected and kernel modes, user threads executing signal handlers in protected, kernel memory is problematic. Instead, convert the same logic to perform the notifications via function callback on the high priority work queue.
This makes the user interface a little hostile. People thing of an MTU of 1500 bytes, but the corresponding packet is really 1514 bytes (including the 14 byte Ethernet header). A more friendly solution would configure the MTU (as before), but then derive the packet buffer size by adding the MAC header length. Instead, we define the packet buffer size then derive the MTU.
The MTU is not common currency in networking. On the wire, the only real issue is the MSS which is derived from MTU by subtracting the IP header and TCP header sizes (for the case of TCP). Now it is derived for the PKTSIZE by subtracting the IP header, the TCP header, and the MAC header sizes. So we should be all good and without the recurring 14 byte error in MTU's and MSS's.
Squashed commit of the following:
Trivial update to fix some spacing issues.
net/: Rename several macros containing _MTU to _PKTSIZE.
net/: Rename CONFIG_NET_SLIP_MTU to CONFIG_NET_SLIP_PKTSIZE and similarly for CONFIG_NET_TUN_MTU. These are not the MTU which does not include the size of the link layer header. These are the full size of the packet buffer memory (minus any GUARD bytes).
net/: Rename CONFIG_NET_6LOWPAN_MTU to CONFIG_NET_6LOWPAN_PKTSIZE and similarly for CONFIG_NET_TUN_MTU. These are not the MTU which does not include the size of the link layer header. These are the full size of the packet buffer memory (minus any GUARD bytes).
net/: Rename CONFIG_NET_ETH_MTU to CONFIG_NET_ETH_PKTSIZE. This is not the MTU which does not include the size of the link layer header. This is the full size of the packet buffer memory (minus any GUARD bytes).
net/: Rename the file d_mtu in the network driver structure to d_pktsize. That value saved there is not the MTU. The packetsize is the memory large enough to hold the maximum packet PLUS the size of the link layer header. The MTU does not include the link layer header.
Fix a few typo/compilation problems.
net/: Remove all CONFIG_NET_xxx_TCP_RECVWNDO configuration variables. They were used only to initialize the d_recwndo of the network device structure which no longer exists.
net/: Remove the device TCP receive window field (d_recvwndo) from the device structure. That value is no longer retained, but is calculated dynamically.
Remove some dangling references to CONFIG_NET_TCP_RWND_CONTROL.
net/tcp: Take read-ahead throttling into account when calculating the TCP receive window size.
net/tcp: tcp_get_recvwindow() now returns the receive window size directly (vs. indirectly via the device structure).
net/tcp: Remove CONFIG_NET_TCP_RWND_CONTROL. TCP window algorithm is now trigged only by CONFIG_NET_TCP_READAHEAD.
