This adds support for the Q10 BlackBerry based keyboard
from Solder Party. https://www.solder.party/docs/keyboard-pmod/
They keyboard device registered at /dev/kbdN is fully compatible
with hidkbd and has been testing with the Keyboard FeatherWing
on the nRF52 platform.
The buttons are added as a standard discrete joystick if
optionally enabled. The PMOD variant of this does not
include these buttons, but the Keyboard FeatherWing does.
This joystick is usually defined at /dev/djoyN and
can be used with the djoy example application.
Signed-off-by: Brennan Ashton <bashton@brennanashton.com>
proxies/PROXY_gettid.c: In function 'gettid':
proxies/PROXY_gettid.c:12:41: error: 'SYS_gettid' undeclared (first use in this function); did you mean 'SYS_getpid'?
12 | return (pid_t)sys_call0((unsigned int)SYS_gettid);
| ^~~~~~~~~~
| SYS_getpid
proxies/PROXY_gettid.c:12:41: note: each undeclared identifier is reported only once for each function it appears in
proxies/PROXY_gettid.c:13:1: warning: control reaches end of non-void function [-Wreturn-type]
13 | }
| ^
CC: proxies/PROXY_mmap.c
Makefile:83: recipe for target 'PROXY_gettid.o' failed
Signed-off-by: liuhaitao <liuhaitao@xiaomi.com>
Change-Id: Ib4d6e315aa7f17235292dd2d6550458a53bc1596
base/time/time_exploded_posix.cc:190:14: error: ‘struct tm’ has no member named ‘tm_zone’; did you mean ‘tm_mon’?
190 | timestruct.tm_zone = nullptr; // not a POSIX field, so mktime/timegm ignore
| ^~~~~~~
| tm_mon
Change-Id: I9f93e63b50c0692a7a2bfc47abd9d07aa2c8e8db
Signed-off-by: chao.an <anchao@xiaomi.com>
This implements the missing callback hooks nrf52_spi0/1/2/3register
that are usually used with mmcsd for card detection.
This also stubs out the missing spi trigger function which is not
used on this platform.
The card detect was tested with the nRF52-feather board and a
modified KeyBoard FeatherWing.
Signed-off-by: Brennan Ashton <bashton@brennanashton.com>
1. There is difference about symbol replace on nuttx-names.in
between MacOS & Linux
2. For MacOS, if open '-fvisibility=hidden' and adjust nuttx-names.in,
it will meet symbol link-back-to-nuttx error.
3. Make the MacOS replace behaviour, same with Linux
Note:
MacOS should install objcopy with command:
$ brew install binutils
$ export PATH=$PATH:/usr/local/opt/binutils/bin
already check in to cibuild.sh
Change-Id: If78b784cc0ecb98cdbf7091de38acef00a8a02f3
Signed-off-by: ligd <liguiding1@xiaomi.com>
This patch resolves to bugs in the GPIO interrupt logic:
1. Any pins did not have STMPE811_GPIO_RISING in their pincfg
would clear the rising edge interrupt enable flag for all
pins due to a masking bug.
2. Pins would never trigger a second interrupt. There is an
undocumented requirement that you have to clear both the
GPIO interrupt status register __and__ also the edge
detection status register. Failure to clear either of
these will result in no further interrupts being triggered.
This requirement exists both for edge and level modes of
operation.
Signed-off-by: Brennan Ashton <bashton@brennanashton.com>
Summary:
- This commit applies NET_LL_IEEE80211 to gs2200m.c
- Also selects DRIVERS_IEEE80211 in Kconfig
Impact:
- Affects use cases with gs2200m driver
Testing:
- Tested with spresense:wifi and spresense:wifi_smp
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
