Gregory Nutt
|
1f7df26f24
|
SAME70: Initialization has to be done a little differently because the board has no 32.768KHz crystal installed
|
2015-11-30 15:20:21 -06:00 |
|
Gregory Nutt
|
fbca4d4ecf
|
SAME70-Xplained: Update configuration: Board has only one button
|
2015-11-30 13:10:33 -06:00 |
|
Gregory Nutt
|
5926a09498
|
Update README
|
2015-11-30 13:05:14 -06:00 |
|
Gregory Nutt
|
049616b40d
|
SAME70 Xplained: Refresh configuration, enable PROCFS. Add logic to automatically mount procfs during initialization
|
2015-11-30 08:04:32 -06:00 |
|
Gregory Nutt
|
1216398f62
|
sam: Refresh all configurations: Enable PROCFS and NSH_ARCHINIT in all NSH configurations
|
2015-11-29 13:52:50 -06:00 |
|
Gregory Nutt
|
b9a26bae77
|
Move up_appinit.c to configs/sim/src where it belongs. Add logic to automatically mount the procfs file system if it is enabled.
|
2015-11-29 13:30:12 -06:00 |
|
Gregory Nutt
|
6b9c0c7c72
|
Fix an error commit with last changes
|
2015-11-29 12:12:43 -06:00 |
|
Gregory Nutt
|
463637f474
|
All SAMA5 configurations: Refresh configurations, enable PROCFS in all configurations that have CONFIG_NSH_LIBRARY=y, add logic to automatically mount the procfs if it is enabled
|
2015-11-29 11:34:09 -06:00 |
|
Gregory Nutt
|
7a551aed6e
|
STM32F4-Discovery: Refresh all configurations; enable PROCFS in all NSH configurations
|
2015-11-29 10:02:21 -06:00 |
|
Gregory Nutt
|
9701e66e5c
|
SAMV71-XULT and STM32F4Discovery: Automatically mount procfs on startup
|
2015-11-29 09:47:36 -06:00 |
|
Gregory Nutt
|
1fceb9463e
|
Update and enable procfs in all SAMV71-XULT configurations
|
2015-11-29 07:16:14 -06:00 |
|
Gregory Nutt
|
2eff9aa773
|
Enable procfs file system in sim/nsh configuration
|
2015-11-28 07:01:31 -06:00 |
|
Gregory Nutt
|
509028aa46
|
SAMV7-XULT: Enable procfs in the netnsh configuration
|
2015-11-27 12:31:51 -06:00 |
|
Gregory Nutt
|
d2f11015aa
|
Refresh (and fix) defconfig file
|
2015-11-26 17:29:44 -06:00 |
|
Gregory Nutt
|
c5e097f6d2
|
Refresh configuration
|
2015-11-26 13:16:46 -06:00 |
|
Gregory Nutt
|
4e10465541
|
Eliminate a warning
|
2015-11-26 12:51:13 -06:00 |
|
Gregory Nutt
|
87530bf910
|
Enable /dev/zero and /dev/loop in sim/nsh configuration
|
2015-11-26 06:58:09 -06:00 |
|
Gregory Nutt
|
651bd9e8ad
|
Rename CONFIG_LOOP to CONFIG_DEV_LOOP
|
2015-11-25 17:11:27 -06:00 |
|
Gregory Nutt
|
e687a9f1b9
|
sim/nsh: Enable NSH data command and extended time functions
|
2015-11-25 11:53:42 -06:00 |
|
Gregory Nutt
|
df431c1844
|
Merged in paulpatience/nuttx-boards/nucleo_f303re (pull request #22)
Nucleo F303RE: Comment out CONFIG_APPS_DIR
|
2015-11-25 10:18:23 -06:00 |
|
Paul A. Patience
|
40c4dc435d
|
Nucleo F303RE: Comment out CONFIG_APPS_DIR
|
2015-11-25 11:06:22 -05:00 |
|
Paul A. Patience
|
15e25b6664
|
Nucleo F303RE: Add serialrx configuration
|
2015-11-25 11:00:30 -05:00 |
|
Gregory Nutt
|
bdc6882499
|
Refresh a configuration
|
2015-11-25 08:12:14 -06:00 |
|
Frank Benkert
|
570b211f44
|
SAMV71-XULT: Fix some bad conditional compilation. From Frank Benkert
|
2015-11-24 06:25:27 -06:00 |
|
Gregory Nutt
|
175d248af1
|
Refresh all configurations that have SMARTFS enabled. They should have MKSMARTFS enabled for backward compatibility.
|
2015-11-23 11:20:47 -06:00 |
|
marawan31
|
af7cfebff9
|
added unique id implementation for f4discovery
|
2015-11-22 13:28:59 -05:00 |
|
Gregory Nutt
|
abb7171a89
|
SAMV71-XULT: Add hooks for testing the PCF85263 RTC
|
2015-11-21 07:14:05 -06:00 |
|
Gregory Nutt
|
0ca9047488
|
SAME70 Xplained: Update some PHY pin definitions
|
2015-11-19 17:16:11 -06:00 |
|
Gregory Nutt
|
e9abfb0de8
|
SAMV71-XULT: Add support for an external I2C RTC
|
2015-11-19 14:52:52 -06:00 |
|
Gregory Nutt
|
cedec09f8f
|
SAME70 Xplained: Update README; switch to USART1
|
2015-11-19 12:15:13 -06:00 |
|
Gregory Nutt
|
5106a8a9ca
|
SAME70 Xplained: Updated README
|
2015-11-19 10:25:08 -06:00 |
|
Gregory Nutt
|
f4213873f3
|
board_uniqueid should return a negated errno value on failure
|
2015-11-19 10:23:01 -06:00 |
|
Marwan Ragab
|
fb0145d0c8
|
added unique id implementation for nucleo-f303re
|
2015-11-19 11:11:12 -05:00 |
|
Gregory Nutt
|
046212dc4e
|
Update README
|
2015-11-18 18:09:06 -06:00 |
|
Gregory Nutt
|
25251db103
|
SAME70-Xplained: Has only a single LED and a single push button
|
2015-11-18 16:45:29 -06:00 |
|
Gregory Nutt
|
faa9f50e53
|
Fix several build errors detected by tools/testbuil.sh, most configuration problems
|
2015-11-18 14:35:08 -06:00 |
|
Gregory Nutt
|
c154a4a1e2
|
Add basic support for the SAME70-Xplained board
|
2015-11-18 13:54:57 -06:00 |
|
Gregory Nutt
|
aa812f3838
|
SAMV7-XULT: Add an NSH protected build configuration. Untested on initial commit.
|
2015-11-18 11:45:01 -06:00 |
|
Gregory Nutt
|
67be368aa0
|
Rfress some configurations
|
2015-11-18 11:43:30 -06:00 |
|
Gregory Nutt
|
5773e78a16
|
In protected build, need to specify CPU configuration on GCC command line or we get the wrong libgcc
|
2015-11-18 11:43:00 -06:00 |
|
Gregory Nutt
|
91a8514774
|
Add a command to boardctl() to obtain a baord unique ID
|
2015-11-18 07:31:23 -06:00 |
|
Gregory Nutt
|
5937f9930d
|
(Hopefully) cosmetic changes from review of recent merges for conformance to coding standard
|
2015-11-17 16:53:49 -06:00 |
|
Wail Khemir
|
540a3b701a
|
Added a lower-half timer driver for stm32 which is compatible with the upper-half driver located at /drivers/timers/timer.c
|
2015-11-17 17:09:10 -05:00 |
|
Gregory Nutt
|
3d8d2e23c8
|
Refresh configuration
|
2015-11-17 14:06:09 -06:00 |
|
Gregory Nutt
|
c376e14e88
|
Refresh Spark configurations
|
2015-11-16 13:26:31 -06:00 |
|
Alan Carvalho de Assis
|
0a3d0ec1f5
|
configs/stm32f429i-disco/src/stm32_nsh.c file calculated partition boundries based on page block sizes but mtd_partition is expecting calculations based on erase block size. From Alan Carvalho de Assis.
|
2015-11-16 10:44:54 -06:00 |
|
Gregory Nutt
|
06b48e5152
|
Update README
|
2015-11-13 15:56:16 -06:00 |
|
Gregory Nutt
|
dae831b7ba
|
Update README file
|
2015-11-13 15:13:55 -06:00 |
|
Gregory Nutt
|
3fe1196ae8
|
SAMV71-XULT: Need to call sem_progmem_initialize() before using progmem MTD driver
|
2015-11-12 16:12:40 -06:00 |
|
Gregory Nutt
|
d20f61d2a8
|
SAMV7-XULT: Add support for a character device to access the on-chip FLASH programming memory
|
2015-11-12 16:02:18 -06:00 |
|
Paul A. Patience
|
9cd90f3e6e
|
Nucleo F303RE: Move C++ initialization from configs to apps/platform
|
2015-11-12 12:10:27 -05:00 |
|
Gregory Nutt
|
c9fc120511
|
SAMV71-XULT: Allow support for SmartFS again. Problem fixed
|
2015-11-11 14:28:01 -06:00 |
|
Gregory Nutt
|
041089ba5a
|
Update README
|
2015-11-10 18:08:21 -06:00 |
|
Gregory Nutt
|
fbf203bb1f
|
SAMV71-XULT: Add support for the NXFFS file system on QuadSPI
|
2015-11-10 17:42:56 -06:00 |
|
Gregory Nutt
|
fa637597a0
|
Merged in paulpatience/nuttx-boards/nucleo_f303re_uavcan (pull request #16)
Nucleo F303RE: Update UAVCAN configuration
|
2015-11-10 16:56:45 -06:00 |
|
Paul A. Patience
|
8452f6083a
|
Nucleo F303RE: Update UAVCAN configuration
|
2015-11-10 17:38:27 -05:00 |
|
Paul A. Patience
|
6163aea14a
|
Nucleo F303RE: Update CAN configuration
|
2015-11-10 16:07:23 -05:00 |
|
Gregory Nutt
|
aca896045c
|
SAMV71-XULT: Adapt for changes to s24fl_initialize() prototype
|
2015-11-10 11:31:42 -06:00 |
|
Gregory Nutt
|
e85baa6dde
|
SAMV7-XULT: If no file system is specified for the S25FL1, wrap it as a character device
|
2015-11-09 09:33:41 -06:00 |
|
Gregory Nutt
|
aae9b2b40c
|
Update README
|
2015-11-07 11:47:38 -06:00 |
|
Gregory Nutt
|
2b8ecb042b
|
Fix naming of Spansion device, s25fl1 not st25fl1
|
2015-11-07 11:30:24 -06:00 |
|
Gregory Nutt
|
f2b3b65456
|
SAMV7-XULT: Update README
|
2015-11-07 11:25:58 -06:00 |
|
Gregory Nutt
|
4a28ff1abb
|
SAMV71-XULT: Add support for SmartFS on QuadFLASH
|
2015-11-05 11:26:30 -06:00 |
|
Paul A. Patience
|
f9ef91d180
|
Nucleo F303RE: Add ADC
|
2015-11-05 10:17:15 -05:00 |
|
Gregory Nutt
|
c8ee1c2061
|
STM32F429i-Discovery: Need to add pin disambiguation due to changes to pinmap header files
|
2015-11-01 17:40:30 -06:00 |
|
Gregory Nutt
|
8b9cbc05f6
|
Merged in paulpatience/nuttx-boards/nucleo_f303re_pwm (pull request #13)
Nucleo F303RE: Add PWM
|
2015-11-01 16:53:14 -06:00 |
|
Gregory Nutt
|
936c208af4
|
Renaming for better consistency
|
2015-11-01 16:26:50 -06:00 |
|
Gregory Nutt
|
109b4f496a
|
Fix some errors introduced into the Mirtoo configuration in the last commits
|
2015-11-01 16:26:41 -06:00 |
|
Paul A. Patience
|
ae748393ce
|
Nucleo F303RE: Add PWM
|
2015-11-01 17:13:03 -05:00 |
|
Gregory Nutt
|
9743e5997e
|
Mark function as static
|
2015-11-01 12:47:19 -06:00 |
|
Gregory Nutt
|
b28bd72a48
|
Standardize naming of user LEDs interface functions
|
2015-11-01 12:45:58 -06:00 |
|
Gregory Nutt
|
f56ed529e5
|
Remove prototypes for all user LED interfaces from board.h header files
|
2015-11-01 10:53:34 -06:00 |
|
Gregory Nutt
|
893bd9c7b5
|
Rename board_led_off to board_autoled_off
|
2015-11-01 09:10:08 -06:00 |
|
Gregory Nutt
|
78f19bbefb
|
Rename board_led_on to board_autoled_on
|
2015-11-01 09:07:36 -06:00 |
|
Gregory Nutt
|
88c506d843
|
Rename board_led_initialize to board_autoled_initiaize
|
2015-11-01 09:03:01 -06:00 |
|
Gregory Nutt
|
d0c332b5c9
|
Add file missed in last commit
|
2015-10-18 08:03:17 +08:00 |
|
Alan Carvalho de Assis
|
82bc95c340
|
Add board config to support MAX6675
|
2015-10-18 07:54:21 +08:00 |
|
Alan Carvalho de Assis
|
f2d07ad135
|
STM32F4-Discvovery: Add low level support for the Zero Cross driver. From Alan Carvalho de Assis
|
2015-10-13 07:35:09 -06:00 |
|
Paul A. Patience
|
a778cb3a49
|
STM32F4-Discovery: Configure CAN2 GPIOs if UAVCAN uses two interfaces
|
2015-10-08 15:49:52 -04:00 |
|
Paul A. Patience
|
dd468add8a
|
Nucleo F303RE and STM32F4-Discovery: Configure CAN GPIOs in stm32_boardinitialize() instead of in board_app_initialize()
|
2015-10-08 13:18:32 -04:00 |
|
Paul A. Patience
|
06a88178af
|
Nucleo F303RE and STM32F4-Discovery: Configure CAN GPIOs in board_app_initialize
|
2015-10-06 23:49:28 -04:00 |
|
Paul A. Patience
|
6a94d0e45a
|
STM32F4-Discovery: Add SSD1351 SPI 4-wire interface
|
2015-10-06 19:05:32 -04:00 |
|
Gregory Nutt
|
ef5959a9d1
|
Remove TABs
|
2015-10-04 16:01:02 -06:00 |
|
Gregory Nutt
|
fc58f7e538
|
Remove dangling whitespace
|
2015-10-04 15:28:03 -06:00 |
|
Gregory Nutt
|
b6930e442b
|
Fix some spacing problems
|
2015-10-04 14:59:44 -06:00 |
|
Gregory Nutt
|
2b88bc7119
|
Standardize the width of all comment boxes in C header files
|
2015-10-03 07:41:15 -06:00 |
|
Gregory Nutt
|
f696caa6f4
|
Standardize the width of all comment boxes in C files
|
2015-10-03 07:25:23 -06:00 |
|
Gregory Nutt
|
6cb20d3fba
|
Standardize the width of all comment boxes in header files
|
2015-10-02 17:47:56 -06:00 |
|
Gregory Nutt
|
e6e46f830b
|
Standardize the width of all comment boxes in C files
|
2015-10-02 17:43:08 -06:00 |
|
Gregory Nutt
|
85aaed9ef4
|
Standardize nameing of the pre-processor definitiongs group header
|
2015-10-02 14:15:59 -06:00 |
|
Gregory Nutt
|
4c40db9586
|
Trivial changes from code review
|
2015-10-02 11:31:27 -06:00 |
|
Gregory Nutt
|
5caa89bf31
|
Update a README file
|
2015-10-01 13:09:32 -06:00 |
|
Gregory Nutt
|
3640042be8
|
Various fixes for compilation issues found by tools/testbuild.sh
|
2015-10-01 11:08:07 -06:00 |
|
Gregory Nutt
|
b863ad355a
|
Refresh an incorrect, hand modified configuration
|
2015-10-01 10:01:00 -06:00 |
|
Gregory Nutt
|
2c791634c6
|
Merged in paulpatience/nuttx-boards (pull request #9)
Nucleo F303RE: Add SSD1351 SPI 4-wire interface
|
2015-09-29 16:29:45 -06:00 |
|
Gregory Nutt
|
fe8c622d1d
|
Update READMEs again; NSH init thread priority should default to some value less then 100
|
2015-09-29 16:09:22 -06:00 |
|
Paul A. Patience
|
c08e4e582c
|
Nucleo F303RE: Add SSD1351 SPI 4-wire interface
|
2015-09-29 16:00:25 -04:00 |
|
Gregory Nutt
|
d70bd7cc2e
|
Update READMEs; refresh some configurations
|
2015-09-29 13:48:55 -06:00 |
|
Gregory Nutt
|
a9dfb1e453
|
Update README
|
2015-09-29 09:21:41 -06:00 |
|
Gregory Nutt
|
f28e0ce95c
|
Back out bad change in last merge
|
2015-09-29 08:19:17 -06:00 |
|